advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this paragraph, we have a few instances of the '^' character, which
we give as "\^". This renders well with AsciiDoc ("^"), but Asciidoctor
renders it literally as "\^". Dropping the backslashes renders fine
with Asciidoctor, but not AsciiDoc...
An earlier version of this patch used "{caret}" instead of "^", which
avoided these escaping problems. The rendering was still so-so, though
-- these expressions end up set as normal text, similarly to when one
provides, e.g., computer code in the middle of running text, without
properly marking it with `backticks` to be monospaced.
As noted by Jeff King, this suggests actually wrapping these
expressions in backticks, setting them in monospace.
The lone "5" could be left as is or wrapped as `5`. Spell it out as
"five" instead -- this generally looks better anyway for small numbers
in the middle of text like this.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are lots of places in 'commit-graph.h' where a function either has
(or almost has) a full 'struct object_directory *', accesses '->path',
and then throws away the rest of the struct.
This can cause headaches when comparing the locations of object
directories across alternates (e.g., in the case of deciding if two
commit-graph layers can be merged). These paths are normalized with
'normalize_path_copy()' which mitigates some comparison issues, but not
all [1].
Replace usage of 'char *object_dir' with 'odb->path' by storing a
'struct object_directory *' in the 'write_commit_graph_context'
structure. This is an intermediate step towards getting rid of all path
normalization in 'commit-graph.c'.
Resolving a user-provided '--object-dir' argument now requires that we
compare it to the known alternates for equality. Prior to this patch,
an unknown '--object-dir' argument would silently exit with status zero.
This can clearly lead to unintended behavior, such as verifying
commit-graphs that aren't in a repository's own object store (or one of
its alternates), or causing a typo to mask a legitimate commit-graph
verification failure. Make this error non-silent by 'die()'-ing when the
given '--object-dir' does not match any known alternate object store.
[1]: In my testing, for example, I can get one side of the commit-graph
code to fill object_dir with "./objects" and the other with just
"objects".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing documentation does not clarify how the 'set' subcommand
changes when core.sparseCheckoutCone is enabled. Correct this by
changing some language around the "A/B/C" example. Also include a
description of the input format matching the output of 'git ls-tree
--name-only'.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f0fd0dc5c5 (submodule foreach: document '$sm_path' instead of '$path',
2018-05-08) updated the documentation to advise callers to favor
$sm_path over the deprecated synonym $path. However, the example in
that section still uses $path. Update it to use $sm_path.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
gpg.minTrustLevel configuration variable has been introduced to
tell various signature verification codepaths the required minimum
trust level.
* hi/gpg-mintrustlevel:
gpg-interface: add minTrustLevel as a configuration option
git --git-dir <path> is a bit confusing and sometimes doesn't work as
the user would expect it to.
For example, if the user runs `git --git-dir=<path> status`, git
will skip the repository discovery algorithm and will assign the
work tree to the user's current work directory unless otherwise
specified. When this assignment is wrong, the output will not match
the user's expectations.
This patch updates the documentation to make it clearer.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since grep learned to recurse into submodules in 0281e487fd
(grep: optionally recurse into submodules, 2016-12-16),
using --recurse-submodules along with --no-index makes Git
die().
This is unfortunate because if submodule.recurse is set in a user's
~/.gitconfig, invoking `git grep --no-index` either inside or outside
a Git repository results in
fatal: option not supported with --recurse-submodules
Let's allow using these options together, so that setting submodule.recurse
globally does not prevent using `git grep --no-index`.
Using `--recurse-submodules` should not have any effect if `--no-index`
is used inside a repository, as Git will recurse into the checked out
submodule directories just like into regular directories.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for push.default mentions that it is used if no
refspec is "explicitly given". Let's drop the notion of "explicit" here,
since it's vague, and just mention that any refspec from anywhere is
sufficient to override this.
I've dropped the mention of "explicitly given" from the definition of
the "nothing" value right below, too. It's close enough to our
clarification that it should be obvious we mean the same type of "given"
here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With https://lore.kernel.org/git/20191114194708.GD60198@google.com/ we
now have a mentoring mailing list, to which we should direct new
contributors who have questions.
Mention #git-devel, which is targeted for Git contributors; asking for
help with getting a first contribution together is on-topic for that
channel. Also mention some of the conventions in case folks are
unfamiliar with IRC.
Because the mentoring list and #git-devel are both a subset of Git
contributors, finally list the main Git list and mention some of the
posting conventions.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new config value for core.fsmonitorHookVersion was added to be able
to force the version of the fsmonitor hook. Possible values are 1 or 2.
When this is not set the code will use a value of -1 and attempt to use
version 2 of the hook first and if that fails will attempt version 1.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In af09ce2 ("sparse-checkout: init and set in cone mode", 2019-11-21),
the '--cone' option was added to 'git sparse-checkout init'.
Document it.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it possible to configure if we want pack reuse or not.
The main reason it might not be wanted is probably debugging and
performance testing, though pack reuse _might_ cause larger packs,
because we wouldn't consider the reused objects as bases for
finding new deltas.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete an update to tutorial that encourages "git switch" over
"git checkout" that was done only half-way.
* hw/tutorial-favor-switch-over-checkout:
doc/gitcore-tutorial: fix prose to match example command
Users in a wide variety of situations find themselves with HTTP push
problems. Oftentimes these issues are due to antivirus software,
filtering proxies, or other man-in-the-middle situations; other times,
they are due to simple unreliability of the network.
However, a common solution to HTTP push problems found online is to
increase http.postBuffer. This works for none of the aforementioned
situations and is only useful in a small, highly restricted number of
cases: essentially, when the connection does not properly support
HTTP/1.1.
Document when raising this value is appropriate and what it actually
does, and discourage people from using it as a general solution for push
problems, since it is not effective there.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is quite common for users to want to ignore the changes to a file
that Git tracks. Common scenarios for this case are IDE settings and
configuration files, which should generally not be tracked and possibly
generated from tracked files using a templating mechanism.
However, users learn about the assume-unchanged and skip-worktree bits
and try to use them to do this anyway. This is problematic, because
when these bits are set, many operations behave as the user expects, but
they usually do not help when git checkout needs to replace a file.
There is no sensible behavior in this case, because sometimes the data
is precious, such as certain configuration files, and sometimes it is
irrelevant data that the user would be happy to discard.
Since this is not a supported configuration and users are prone to
misuse the existing features for unintended purposes, causing general
sadness and confusion, let's document the existing behavior and the
pitfalls in the documentation for git update-index so that users know
they should explore alternate solutions.
In addition, let's provide a recommended solution to dealing with the
common case of configuration files, since there are well-known
approaches used successfully in many environments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a frequent misconception that the user.name variable controls
authentication in some way, and as a result, beginning users frequently
attempt to change it when they're having authentication troubles.
Document that the convention is that this variable represents some form
of a human's personal name, although that is not required. In addition,
address concerns about whether Unicode is supported.
Use the term "personal name" as this is likely to draw the intended
contrast, be applicable across cultures which may have different naming
conventions, and be easily understandable to people who do not speak
English as their first language. Indicate that "some form" is
conventionally used, as people may use a nickname or preferred name
instead of a full legal name.
Point users who may be confused about authentication to an appropriate
configuration option instead. Provide a shortened form of this
information in the configuration option description.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the section on setting author and committer information, we omit the
author.* and committer.* variables, so mention them for completeness.
In addition, guide users to the typical case: simply setting user.name
and user.email, which are recommended if one does not need complex
configuration.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at one time it made perfect sense to store information about
configuring author and committer information in the documentation for
git commit-tree, in modern Git that operation is seldom used. Most
users will use git commit and expect to find comprehensive documentation
about its use in the manual page for that command.
Considering that there is significant confusion about how one is to use
the user.name and user.email variables, let's put as much documentation
as possible into an obvious place where users will be more likely to
find it.
In addition, expand the environment variables section to describe their
use more fully. Even though we now describe all of the options there
and in the configuration settings documentation, preserve the existing
text in git-commit.txt so that people can easily reason about the
ordering of the various options they can use. Explain the use of the
author.* and committer.* options as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch continues the effort that is already applied to
`git commit`, `git reset`, `git checkout` etc.
1) Changed outdated descriptions to mention pathspec instead.
2) Added reference to 'linkgit:gitglossary[7]'.
3) Removed content that merely repeated gitglossary.
4) Merged the remainder of "discussion" into `<patchspec>`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many languages, the adverb with the root "actual" means "at the
present time." However, this usage is considered dated or even archaic
in English, and for referring to events occurring at the present time,
we usually prefer "currently" or "presently". "Actually" is commonly
used in modern English only for the meaning of "in fact" or to express a
contrast with what is expected.
Since the documentation refers to the available options at the present
time (that is, at the time of writing) instead of drawing a contrast,
let's switch to "currently," which both is commonly used and sounds less
formal than "presently."
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prevent long blocking time during a 'git fetch' call, a user
may want to set up a schedule for background 'git fetch' processes.
However, these runs will update the refs/remotes branches due to
the default refspec set in the config when Git adds a remote.
Hence the user will not notice when remote refs are updated during
their foreground fetches. In fact, they may _want_ those refs to
stay put so they can work with the refs from their last foreground
fetch call.
This can be accomplished by overriding the configured refspec using
'--refmap=' along with a custom refspec:
git fetch --refmap='' <remote> +refs/heads/*:refs/hidden/<remote>/*
to populate a custom ref space and download a pack of the new
reachable objects. This kind of call allows a few things to happen:
1. We download a new pack if refs have updated.
2. Since the refs/hidden branches exist, GC will not remove the
newly-downloaded data.
3. With fetch.writeCommitGraph enabled, the refs/hidden refs are
used to update the commit-graph file.
To avoid the refs/hidden directory from filling without bound, the
--prune option can be included. When providing a refspec like this,
the --prune option does not delete remote refs and instead only
deletes refs in the target refspace.
Update the documentation to clarify how '--refmap=""' works and
create tests to guarantee this behavior remains in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b00bf1c9a8 ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They were disabled at 53b8d93 ("grep: disable threading in non-worktree
case", 12-12-2011), due to observable performance drops (to the point
that using a single thread would be faster than multiple threads). But
now that zlib inflation can be performed in parallel we can regain the
speedup, so let's re-enable threads in non-worktree grep.
Grepping 'abcd[02]' ("Regex 1") and '(static|extern) (int|double) \*'
("Regex 2") at chromium's repository[1] I got:
Threads | Regex 1 | Regex 2
---------|------------|-----------
1 | 17.2920s | 20.9624s
2 | 9.6512s | 11.3184s
4 | 6.7723s | 7.6268s
8** | 6.2886s | 6.9843s
These are all means of 30 executions after 2 warmup runs. All tests were
executed on an i7-7700HQ (quad-core w/ hyper-threading), 16GB of RAM and
SSD, running Manjaro Linux. But to make sure the optimization also
performs well on HDD, the tests were repeated on another machine with an
i5-4210U (dual-core w/ hyper-threading), 8GB of RAM and HDD (SATA III,
5400 rpm), also running Manjaro Linux:
Threads | Regex 1 | Regex 2
---------|------------|-----------
1 | 18.4035s | 22.5368s
2 | 12.5063s | 14.6409s
4** | 10.9136s | 12.7106s
** Note that in these cases we relied on hyper-threading, and that's
probably why we don't see a big difference in time.
Unfortunately, multithreaded git-grep might be slow in the non-worktree
case when --textconv is used and there're too many text conversions.
Probably the reason for this is that the object read lock is used to
protect fill_textconv() and therefore there is a mutual exclusion
between textconv execution and object reading. Because both are
time-consuming operations, not being able to perform them in parallel
can cause performance drops. To inform the users about this (and other
threading details), let's also add a "NOTES ON THREADS" section to
Documentation/git-grep.txt.
[1]: chromium’s repo at commit 03ae96f (“Add filters testing at DSF=2”,
04-06-2019), after a 'git gc' execution.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git users at $DAYJOB have been using protocol v2 as a default for
~1.5 years now and others have been also reporting good experiences
with it, so it seems like a good time to bump the default version. It
produces a significant performance improvement when fetching from
repositories with many refs, such as
https://chromium.googlesource.com/chromium/src.
This only affects the client, not the server. (The server already
defaults to supporting protocol v2.) The protocol change is backward
compatible, so this should produce no significant effect when
contacting servers that only speak protocol v0.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's protocol version 2 has been working well in production for over
a year. Simplify documentation by no longer referring to it as
experimental.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5d9324e0f4, reversing
changes made to c58ae96fc4.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 328c6cb853 (doc: promote "git switch", 2019-03-29), an example
was changed to use "git switch" rather than "git checkout" but an
instance of "git checkout" in the explanatory text preceding the
example was overlooked. Fix this oversight.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
The sentence wants to talk about the superproject's possesive, not plural form.
Signed-off-by: Thomas Menzel <dev@tomsit.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's core.multiPackIndex, not pack.multiIndex.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This typo was introduced in 94c0956b60 (sparse-checkout: create builtin
with 'list' subcommand, 2019-11-21).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line number, regex or offset parameters <start> and <end> in
`git log -L <start>,<end>:<file>`, or the function name regex in
`git log -L :<funcname>:<file>` must exist in the starting
revision, or else the command exits with a fatal error.
This is not obvious in the documentation, so add a note to that
effect.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the line-log functionality (git log -L) only supports
displaying patch output (`-p | --patch`, its default behavior) and suppressing it
(`-s | --no-patch`). A check was added in the code to that effect in 5314efaea
(line-log: detect unsupported formats, 2019-03-10) but the documentation was not
updated.
Explicitly mention that `-L` implies `-p`, that patch output can be
suppressed using `-s`, and that all other diff formats are not allowed.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
A few more commands learned the "--pathspec-from-file" command line
option.
* am/pathspec-f-f-checkout:
checkout, restore: support the --pathspec-from-file option
doc: restore: synchronize <pathspec> description
doc: checkout: synchronize <pathspec> description
doc: checkout: fix broken text reference
doc: checkout: remove duplicate synopsis
add: support the --pathspec-from-file option
cmd_add: prepare for next patch
* hw/doc-in-header:
trace2: move doc to trace2.h
submodule-config: move doc to submodule-config.h
tree-walk: move doc to tree-walk.h
trace: move doc to trace.h
run-command: move doc to run-command.h
parse-options: add link to doc file in parse-options.h
credential: move doc to credential.h
argv-array: move doc to argv-array.h
cache: move doc to cache.h
sigchain: move doc to sigchain.h
pathspec: move doc to pathspec.h
revision: move doc to revision.h
attr: move doc to attr.h
refs: move doc to refs.h
remote: move doc to remote.h and refspec.h
sha1-array: move doc to sha1-array.h
merge: move doc to ll-merge.h
graph: move doc to graph.h and graph.c
dir: move doc to dir.h
diff: move doc to diff.h and diffcore.h
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Asciidoc allows to not indent following lines in a list item,
it is clearer and safer to follow the recommended rule.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non ASCII characters may be handled by publishing chains, but right
now, nothing indicates the encoding of files. Moreover, non ASCII
source strings upset the localization toolchain.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we slightly tweaked the behavior of having multiple
`format.notes` configuration variables. We did not update the
documentation to reflect this, however.
Explictly state the behavior of having multiple `format.notes`
configuration variables so users are clear on what to expect.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Presently in the manpages git-submodule[1] links to gitsubmodules[7]
and gitmodules[5], gitsubmodules[7] links to git-submodule[1] and gitmodules[5],
but gitmodules[5] only link to git-submodule[1] (and git-config[1]).
Add a link to gitsubmodules[7] in gitmodules[5], so that a person
stumbling upon gitmodules[5] can quickly access gitsubmodules[7],
which has a more high-level overview of submodule usage.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One kind of progress messages were always given during commit-graph
generation, instead of following the "if it takes more than two
seconds, show progress" pattern, which has been corrected.
* ds/commit-graph-delay-gen-progress:
commit-graph: use start_delayed_progress()
progress: create GIT_PROGRESS_DELAY
The interaction between "git clone --recurse-submodules" and
alternate object store was ill-designed. The documentation and
code have been taught to make more clear recommendations when the
users see failures.
* jt/clone-recursesub-ref-advise:
submodule--helper: advise on fatal alternate error
Doc: explain submodule.alternateErrorStrategy
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
Work around a issue where a FD that is left open when spawning a
child process and is kept open in the child can interfere with the
operation in the parent process on Windows.
* js/mingw-inherit-only-std-handles:
mingw: forbid translating ERROR_SUCCESS to an errno value
mingw: do set `errno` correctly when trying to restrict handle inheritance
mingw: restrict file handle inheritance only on Windows 7 and later
mingw: spawned processes need to inherit only standard handles
mingw: work around incorrect standard handles
mingw: demonstrate that all file handles are inherited by child processes
A few commands learned to take the pathspec from the
standard input or a named file, instead of taking it as the command
line arguments.
* am/pathspec-from-file:
commit: support the --pathspec-from-file option
doc: commit: synchronize <pathspec> description
reset: support the `--pathspec-from-file` option
doc: reset: synchronize <pathspec> description
pathspec: add new function to parse file
parse-options.h: add new options `--pathspec-from-file`, `--pathspec-file-nul`
"git rebase -i" learned a few options that are known by "git
rebase" proper.
* ra/rebase-i-more-options:
rebase -i: finishing touches to --reset-author-date
rebase: add --reset-author-date
rebase -i: support --ignore-date
sequencer: rename amend_author to author_to_rename
rebase -i: support --committer-date-is-author-date
sequencer: allow callers of read_author_script() to ignore fields
rebase -i: add --ignore-whitespace flag
Publicize lore.kernel.org mailing list archive and use URLs
pointing into it to refer to notable messages in the documentation.
* dl/lore-is-the-archive:
doc: replace LKML link with lore.kernel.org
RelNotes: replace Gmane with real Message-IDs
doc: replace MARC links with lore.kernel.org
Doc update for the mailing list archiving and nntp service.
* jk/lore-is-the-archive:
doc: replace public-inbox links with lore.kernel.org
doc: recommend lore.kernel.org over public-inbox.org
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
Since ac1fbbda20 (submodule: do not copy unknown update mode from
.gitmodules, 2013-12-02), Git has been careful to avoid copying
[submodule "foo"]
update = !run an arbitrary scary command
from .gitmodules to a repository's local config, copying in the
setting 'update = none' instead. The gitmodules(5) manpage documents
the intention:
The !command form is intentionally ignored here for security
reasons
Unfortunately, starting with v2.20.0-rc0 (which integrated ee69b2a9
(submodule--helper: introduce new update-module-mode helper,
2018-08-13, first released in v2.20.0-rc0)), there are scenarios where
we *don't* ignore it: if the config store contains no
submodule.foo.update setting, the submodule-config API falls back to
reading .gitmodules and the repository-supplied !command gets run
after all.
This was part of a general change over time in submodule support to
read more directly from .gitmodules, since unlike .git/config it
allows a project to change values between branches and over time
(while still allowing .git/config to override things). But it was
never intended to apply to this kind of dangerous configuration.
The behavior change was not advertised in ee69b2a9's commit message
and was missed in review.
Let's take the opportunity to make the protection more robust, even in
Git versions that are technically not affected: instead of quietly
converting 'update = !command' to 'update = none', noisily treat it as
an error. Allowing the setting but treating it as meaning something
else was just confusing; users are better served by seeing the error
sooner. Forbidding the construct makes the semantics simpler and
means we can check for it in fsck (in a separate patch).
As a result, the submodule-config API cannot read this value from
.gitmodules under any circumstance, and we can declare with confidence
For security reasons, the '!command' form is not accepted
here.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
"git submodule status" and "git submodule status --cached" show
different things, but the documentation did not cover them
correctly, which has been corrected.
* mg/doc-submodule-status-cached:
doc: document 'git submodule status --cached'
"git rev-parse --show-toplevel" run outside of any working tree did
not error out, which has been corrected.
* jk/fail-show-toplevel-outside-working-tree:
rev-parse: make --show-toplevel without a worktree an error
"git range-diff" learned to take the "--notes=<ref>" and the
"--no-notes" options to control the commit notes included in the
log message that gets compared.
* dl/range-diff-with-notes:
format-patch: pass notes configuration to range-diff
range-diff: pass through --notes to `git log`
range-diff: output `## Notes ##` header
t3206: range-diff compares logs with commit notes
t3206: s/expected/expect/
t3206: disable parameter substitution in heredoc
t3206: remove spaces after redirect operators
pretty-options.txt: --notes accepts a ref instead of treeish
rev-list-options.txt: remove reference to --show-notes
argv-array: add space after `while`
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
If `format.useAutoBase = true`, there was no way to override this from
the command-line. Teach the `--no-base` option in format-patch to
override `format.useAutoBase`.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're now recommending lore.kernel.org, replace LKML link
with lore.kernel.org.
Although LKML has been around for a long time, nothing lasts forever
(see Gmane). Since LKML uses opaque message identifiers, switching to
lore.kernel.org should be a strict improvement since, even if
lore.kernel.org goes down, the Message-ID will allow future readers to
look up the referenced messages on any other archive.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only references to Gmane that remain are in RelNotes. Although these
are definitely not in active use, they might be of historical interest
for future readers so let's ensure that mail references are more robust.
Replace links to Gmane with links to lore.kernel.org (which is our new
preferred mailing list archive and has the Message-ID in the URL) and
bare Gmane ID references with Message-IDs.
The Message-IDs were found by searching for "gmane:<id>" on
https://public-inbox.org/git/ and taking the resulting message.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're now recommending lore.kernel.org, replace marc.info links
with lore.kernel.org.
Although MARC has been around for a long time, nothing lasts forever
(see Gmane). Since MARC uses opaque message identifiers, switching to
lore.kernel.org should be a strict improvement since, even if
lore.kernel.org goes down, the Message-ID will allow future readers to
look up the referenced messages on any other archive.
We leave behind one reference to MARC in the README.md since it's a
perfectly fine mail archive for personal reading, just not for linking
messages for the future.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected.
2) It is not allowed to pass pathspec in both args and file.
`you must specify path(s) to restore` block was moved down to be able to
test for `pathspec.nr` instead, because testing for `argc` is no longer
correct.
`git switch` does not support the new options because it doesn't expect
`<pathspec>` arguments.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was added in [1]. I understand that the duplicate change was not
intentional and comes from an oversight.
Also, in explanation, there was only one section for two synopsis
entries.
Fix both problems by removing duplicate synopsis.
<paths> vs <pathspec> is resolved in next patch.
[1] Commit b59698ae ("checkout doc: clarify command line args for "checkout paths" mode" 2017-10-11)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--interactive/--patch/--edit`, even when <file> is not `stdin`.
Such use case it not really expected. Also, it would require changes
to `interactive_add()` and `edit_patch()`.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Signed-off-by: Jeff King <peff@peff.net>
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
When recursively cloning a superproject with some shallow modules
defined in its .gitmodules, then recloning with "--reference=<path>", an
error occurs. For example:
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
master
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
--reference master master2
fails with:
fatal: submodule '<snip>' cannot add alternate: reference repository
'<snip>' is shallow
When a alternate computed from the superproject's alternate cannot be
added, whether in this case or another, advise about configuring the
"submodule.alternateErrorStrategy" configuration option and using
"--reference-if-able" instead of "--reference" when cloning.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 31224cbdc7 ("clone: recursive and reference option triggers
submodule alternates", 2016-08-17) taught Git to support the
configuration options "submodule.alternateLocation" and
"submodule.alternateErrorStrategy" on a superproject.
If "submodule.alternateLocation" is configured to "superproject" on a
superproject, whenever a submodule of that superproject is cloned, it
instead computes the analogous alternate path for that submodule from
$GIT_DIR/objects/info/alternates of the superproject, and references it.
The "submodule.alternateErrorStrategy" option determines what happens
if that alternate cannot be referenced. However, it is not clear that
the clone proceeds as if no alternate was specified when that option is
not set to "die" (as can be seen in the tests in 31224cbdc7). Therefore,
document it accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle" has been taught to use the parse options API. "git
bundle verify" learned "--quiet" and "git bundle create" learned
options to control the progress output.
* rj/bundle-ui-updates:
bundle-verify: add --quiet
bundle-create: progress output control
bundle: framework for options before bundle file
The patterns to detect function boundary for Elixir language has
been added.
* ln/userdiff-elixir:
userdiff: add Elixir to supported userdiff languages
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
Misc doc fixes.
* en/misc-doc-fixes:
name-hash.c: remove duplicate word in comment
hashmap: fix documentation misuses of -> versus .
git-filter-branch.txt: correct argument name typo
Fetching from multiple remotes into the same repository in parallel
had a bad interaction with the recent change to (optionally) update
the commit-graph after a fetch job finishes, as these parallel
fetches compete with each other. Which has been corrected.
* js/fetch-multi-lockfix:
fetch: avoid locking issues between fetch.jobs/fetch.writeCommitGraph
fetch: add the command-line option `--write-commit-graph`
Follow recent push to move API docs from Documentation/ to header
files and update config.h
* hw/config-doc-in-header:
config: move documentation to config.h
"git merge --no-commit" needs "--no-ff" if you do not want to move
HEAD, which has been corrected in the manual page for "git bisect".
* ma/bisect-doc-sample-update:
Documentation/git-bisect.txt: add --no-ff to merge command
Since we're now recommending lore.kernel.org (and because the
public-inbox.org domain might eventually go away), let's update our
internal references to use it, too. That future-proofs our references,
and sets the example we want people to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The start_delayed_progress() method is a preferred way to show
optional progress to users as it ignores steps that take less
than two seconds. However, this makes testing unreliable as tests
expect to be very fast.
In addition, users may want to decrease or increase this time
interval depending on their preferences for terminal noise.
Create the GIT_PROGRESS_DELAY environment variable to control
the delay set during start_delayed_progress(). Set the value
in some tests to guarantee their output remains consistent.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the way the `--reset-author-date` option is described,
and mark its usage string translatable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update' will fetch new commits from the submodule remote
if the SHA-1 recorded in the superproject is not found. This was not
mentioned in the documentation.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule status --cached' reports the SHAs recorded in the
index of the superproject, instead of the SHAs that are checked out
in the submodule.
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out that it don't work so well on Vista, see
https://github.com/git-for-windows/git/issues/1742 for details.
According to https://devblogs.microsoft.com/oldnewthing/?p=8873, it
*should* work on Windows Vista and later.
But apparently there are issues on Windows Vista when pipes are
involved. Given that Windows Vista is past its end of life (official
support ended on April 11th, 2017), let's not spend *too* much time on
this issue and just disable the file handle inheritance restriction on
any Windows version earlier than Windows 7.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We deprecated `--preserve-merges` in favor of `--rebase-merges`; Let's
reflect that in `git svn`.
Note: Even when the user asks for `--preserve-merges`, we now silently
pass `--rebase-merges` to `git rebase` instead. Technically, this is a
change of behavior. But practically, `git svn` only ever asks for a
non-interactive rebase, and `--preserve-merges` and `--rebase-merges`
are on par with regard to that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout disable' subcommand returns a user to a
full working directory. The old process for doing this required
updating the sparse-checkout file with the "/*" pattern and then
updating the working directory with core.sparseCheckout enabled.
Finally, the sparse-checkout file could be removed and the config
setting disabled.
However, it is valuable to keep a user's sparse-checkout file
intact so they can re-enable the sparse-checkout they previously
used with 'git sparse-checkout init'. This is now possible with
the in-process mechanism for updating the working directory.
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions for disabling a sparse-checkout to a full
working directory are complicated and non-intuitive. Add a
subcommand, 'git sparse-checkout disable', to perform those
steps for the user.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
and places them in the sparse-checkout file. Then, it updates the
working directory to match those patterns. For a large list of
patterns, the command-line call can get very cumbersome.
Add a '--stdin' option to instead read patterns over standard in.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
as arguments and writes them to the sparse-checkout file. Then, it
updates the working directory using 'git read-tree -mu HEAD'.
The 'set' subcommand will replace the entire contents of the
sparse-checkout file. The write_patterns_and_update() method is
extracted from cmd_sparse_checkout() to make it easier to implement
'add' and/or 'remove' subcommands in the future.
If the core.sparseCheckout config setting is disabled, then enable
the config setting in the worktree config. If we set the config
this way and the sparse-checkout fails, then re-disable the config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting started with a sparse-checkout file can be daunting. Help
users start their sparse enlistment using 'git sparse-checkout init'.
This will set 'core.sparseCheckout=true' in their config, write
an initial set of patterns to the sparse-checkout file, and update
their working directory.
Make sure to use the `extensions.worktreeConfig` setting and write
the sparse checkout config to the worktree-specific config file.
This avoids confusing interactions with other worktrees.
The use of running another process for 'git read-tree' is sub-
optimal. This will be removed in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although `--notes=` accepts and handles a tree-ish just fine, it isn't a
common use-case for users to pass in bare trees. By having "treeish", it
makes it harder to click in users' minds that the argument here is the
same type as the `notes.displayRef` configuration variable, for example.
Change `treeish` to `ref` so that it will be easier for users to make
this connection.
Note that we don't completely lose the notion that `--notes=` can accept
a tree-ish. In git-notes.txt, we have
It is also permitted for a notes ref to point directly to a tree
object, in which case the history of the notes can be read with
`git log -p -g <refname>`.
which means that a hardcore user who wants to take advantage of this
obscure use-case will be able to infer the connection and not be
completely left in the dark.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git was taught the `--pretty=reference` option, it is no longer
necessary to manually specify the format string to get the commit
reference. Teach users to use the new option while keeping the old
invocation around in case they have an older version of Git.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard format for referencing other commits within some projects
(such as git.git) is the reference format. This is described in
Documentation/SubmittingPatches as
If you want to reference a previous commit in the history of a stable
branch, use the format "abbreviated hash (subject, date)", like this:
....
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that ...
....
Since this format is so commonly used, standardize it as a pretty
format.
The tests that are implemented essentially show that the format-string
does not change in response to various log options. This is useful
because, for future developers, it shows that we've considered the
limitations of the "canned format-string" approach and we are fine with
them.
Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the placeholders %as and %cs to format author date and committer
date, respectively, without the time part, like --date=short does, i.e.
like YYYY-MM-DD.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quoting SZEDER Gábor[1],
SubmittingPatches is simply wrong: our de-facto standard format for
referencing other commits does not enclose the subject in a pair of
double-quotes:
$ git log v2.24.0 |grep -E '[0-9a-f]{7} \("' |wc -l
785
$ git log v2.24.0 |grep -E '[0-9a-f]{7} \([^"]' |wc -l
2276
Those double-quotes don't add any value to the references, but they
result in weird looking references for 1083 of our commits whose
subject lines happen to end with double-quotes, e.g.:
f23a465132 ("hashmap_get{,_from_hash} return "struct hashmap_entry *"", 2019-10-06)
and without those unnecessary pair of double-quotes we would have
~3000 more commits whose summary would fit on a single line.
Remove references to the enclosing double-quotes from SubmittingPatches
since our de-facto standard for referencing commits does not actually
use them.
[1]: cf. <20191114011048.GS4348@szeder.dev>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git is planning on upgrading from SHA-1 to be more hash-agnostic,
replace specific references to SHA-1 with more generic terminology.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git is planning on upgrading from SHA-1 to be more hash-agnostic,
replace specific references to SHA-1 with more generic terminology.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ab18b2c0df ("log/pretty-options: Document --[no-]notes and deprecate
old notes options", 2011-03-30), the `--show-notes` option was
deprecated. However, this reference to it still remains. Change it to
reference the replacement option: `--notes`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--interactive/--patch`, even when <file> is not `stdin`. Such use
case it not really expected. Also, it would require changes to
`interactive_add()`.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
This also better disambiguates <file>... header.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected. Also, it is harder to support in `git commit`, so
I decided to make it incompatible in all places.
2) It is not allowed to pass pathspec in both args and file.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since it was introduced in 7cceca5ccc (Add 'git rev-parse
--show-toplevel' option., 2010-01-12), the --show-toplevel option has
treated a missing working tree as a quiet success: it neither prints a
toplevel path, but nor does it report any kind of error.
While a caller could distinguish this case by looking for an empty
response, the behavior is rather confusing. We're better off complaining
that there is no working tree, as other internal commands would do in
similar cases (e.g., "git status" or any builtin with NEED_WORK_TREE set
would just die()). So let's do the same here.
While we're at it, let's clarify the documentation and add some tests,
both for the new behavior and for the more mundane case (which was not
covered).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the functions documentation from
Documentation/technical/api-trace2.txt to trace2.h as it's easier for the
developers to find the usage information beside the code instead of looking
for it in another doc file.
Only the functions documentation section is removed from
Documentation/technical/api-trace2.txt as the file is full of
details that seemed more appropriate to be in a separate doc file
as it is, with a link to the doc file added in the trace2.h.
Also the functions doc is removed to avoid having redundandt info which
will be hard to keep syncronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-submodule-config.txt
to submodule-config.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-submodule-config.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
The documentation of parse_submodule_config_option() is discarded as the
function was removed 2 years ago.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-tree-walking.txt
to tree-walk.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-tree-walking.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-trace.txt
to trace.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-trace.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-run-command.txt
to run-command.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-run-command.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-credentials.txt
to credential.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-credentials.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Documentation/git-credential.txt and Documentation/gitcredentials.txt now link
to credential.h instead of Documentation/technical/api-credentials.txt for
details about the credetials API.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-argv-array.txt
to argv-array.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-argv-array.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-allocation-growing.txt
to cache.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-allocation-growing.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-sigchain.txt
to sigchain.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-sigchain.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-setup.txt
to pathspec.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-setup.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-revision-walking.txt
to revision.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-revision-walking.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-gitattributes.txt
to attr.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-gitattributes.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-ref-iteration.txt
to refs.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-ref-iteration.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-remote.txt to
remote.h and refspec.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
N.B. The doc for both push and fetch members of the remote struct aren't
moved because they are out of date, as the members were changed from arrays
of rspecs to struct refspec 2 years ago.
Also documentation/technical/api-remote.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-oid-array.txt to
sha1-array.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-oid-array.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the related documentation from Documentation/technical/api-merge.txt
to ll-merge.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Only the ll-merge related doc is removed from
documentation/technical/api-merge.txt because this information will be
redundant and it'll be hard to keep it up to date and synchronized with
the documentation in ll-merge.h.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-history-graph.txt to
graph.h and graph.c as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
The graph library was already well documented, so few comments were added to
both graph.h and graph.c
Also documentation/technical/api-history-graph.txt is removed because
the information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-directory-listing.txt
to dir.h as it's easier for the developers to find the usage information
beside the code instead of looking for it in another doc file.
Also documentation/technical/api-directory-listing.txt is removed because
the information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header files.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-diff.txt to both
diff.h and diffcore.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-diff.txt is removed because the information
it has is now redundant and it'll be hard to keep it up to date and
synchronized with the documentation in the header files.
There are three members documented in the doc file that weren't found in
the header files, assuming the doc wasn't up to date and the members
no longer exist:
touched_flags, COLOR_DIFF_WORDS and QUIET.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --preserve-merges was deprecated in 427c3bd28a a sentence
was introduced describing the difference between --rebase-merges and
--preserve-merges which is a little unclear and difficult to parse.
This patch improves readability while retaining original meaning.
Signed-off-by: Naveen Nathan <naveen@lastninja.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --quiet to git-bundle verify as proposed on the mailing list [1].
Reference: https://www.mail-archive.com/git@vger.kernel.org/msg182844.html <robbat2-20190806T191156-796782357Z@orbis-terrarum.net>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the progress output options from pack-objects in git-bundle's
create subcommand. Most notably, this provides --quiet as requested on
the git mailing list per [1]
Reference: https://www.mail-archive.com/git@vger.kernel.org/msg182844.html <robbat2-20190806T191156-796782357Z@orbis-terrarum.net>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
The custom format for "git log --format=<format>" learned the l/L
placeholder that is similar to e/E that fills in the e-mail
address, but only the local part on the left side of '@'.
* pb/pretty-email-without-domain-part:
pretty: add "%aL" etc. to show local-part of email addresses
t4203: use test-lib.sh definitions
t6006: use test-lib.sh definitions
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
"git notes copy $original" ought to copy the notes attached to the
original object to HEAD, but a mistaken tightening to command line
parameter validation made earlier disabled that feature by mistake.
* dd/notes-copy-default-dst-to-head:
notes: fix minimum number of parameters to "copy" subcommand
t3301: test diagnose messages for too few/many paramters
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
Adds support for xfuncref in Elixir[1] language which is Ruby-like
language that runs on Erlang[3] Virtual Machine (BEAM).
[1]: https://elixir-lang.org
[2]: https://www.erlang.org
Signed-off-by: Łukasz Niemier <lukasz@niemier.pl>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shortlog, like git-log, supports options to filter what commits are
used to generate the log. These options come from git-rev-list, and are
documented in Documentation/rev-list-options.txt. Include those options
in shortlog's documentation.
But since rev-list-options.txt contains some other options that don't
really apply in the context of shortlog (like diff formatting, commit
ordering, etc), add a switch in rev-list-options.txt that excludes those
sections from the shortlog documentation. To be more specific, include
only the "Commit Limiting" and "History Simplification" sections.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option overrides the config setting `fetch.writeCommitGraph`, if
both are set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to the recent update to the build procedure for
the documentation.
* bc/doc-use-docbook-5:
manpage-bold-literal.xsl: match for namespaced "d:literal" in template
The previous commit introduced --ignore-date flag to interactive
rebase, but the name is actually very vague in context of rebase -i
since there are two dates we can work with. Add an alias to convey
the precise purpose.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the author date
by changing it to the committer (current) date. Let's add the same
for interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the committer date
by changing it to the author date. Let's add the same for
interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two backends available for rebasing, viz, the am and the
interactive. Naturally, there shall be some features that are
implemented in one but not in the other. One such flag is
--ignore-whitespace which indicates merge mechanism to treat lines
with only whitespace changes as unchanged. Wire the interactive
rebase to also understand the --ignore-whitespace flag by
translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitGitGadget, a handy tool for converting pull requests against Git into
Git-mailing-list-friendly-patch-emails, requires as anti-spam that all
new users be "/allow"ed by an existing user once before it will do
anything for that new user. While this tutorial explained that
mechanism, it did not give much hint on how to go about finding someone
to allow your new pull request. So, teach our new GitGitGadget user
where to look for someone who can add their name to the list.
The advice in this patch is based on the advice proposed for
GitGitGadget: https://github.com/gitgitgadget/gitgitgadget/pull/138
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Indicate that the user needs some dependencies before the build will run
happily on their machine; this dependency list doesn't seem to be made
clear anywhere else in the project documentation. Then, so the user can
be certain any build failures are due to their code and not their
environment, perform a build on a clean checkout of 'master'. Also, move
the note about build parallelization up here, so that it appears next to
the very first build invocation in the tutorial.
Reported-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can discover commands and their brief usage by running 'git help
git' or 'git help -a'; both of these pages list all available commands
based on the contents of 'command-list.txt'. That means adding a new
command there is an important part of the new command process, and
therefore belongs in the new command tutorial.
Teach new users how to add their command, and include a brief overview
of how to discover which attributes to place on the command in the list.
Since 'git psuh' prints some workspace info, doesn't modify anything,
and is targeted as a user-facing porcelain command, list it as a
'mainporcelain' and 'info' command.
As the usage string is required to generate this documentation, don't
add the command to the list until after the usage string is added to the
tutorial.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df1 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As per Wikipedia, "In current technical usage, for one to state that a
feature is deprecated is merely a recommendation against using it." It
is thus contradictory to claim that something is not "officially
deprecated" and then to immediately state that we are both discouraging
its use and pointing people elsewhere.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently regressed our rendering with Asciidoctor of "literal"
elements in our manpages, i.e, stuff we have placed within `backticks`
in order to render as monospace. In particular, we lost the bold
rendering of such literal text.
The culprit is f6461b82b9 ("Documentation: fix build with Asciidoctor 2",
2019-09-15), where we switched from DocBook 4.5 to DocBook 5 with
Asciidoctor. As part of the switch, we started using the namespaced
DocBook XSLT stylesheets rather than the non-namespaced ones. (See
f6461b82b9 for more details on why we changed to the namespaced ones.)
The bold literals are implemented as an XSLT snippet <xsl:template
match="literal">...</xsl:template>. Now that we use namespaces, this
doesn't pick up our literals like it used to.
Match for "d:literal" in addition to just "literal", after defining the
d namespace. ("d" is what
http://docbook.sourceforge.net/release/xsl-ns/current/manpages/docbook.xsl
uses.) Note that we need to keep matching without the namespace for
AsciiDoc.
This boldness was introduced by 5121a6d993 ("Documentation: option to
render literal text as bold for manpages", 2009-03-27) and made the
default in 5945717009 ("Documentation: bold literals in man",
2016-05-31).
One reason this was not caught in review is that our doc-diff tool diffs
without any boldness, i.e., it "only" compares text. As pointed out by
Peff in review of this patch, one can use `MAN_KEEP_FORMATTING=1
./doc-diff <...>`
This has been optically tested with AsciiDoc 8.6.10, Asciidoctor 1.5.5
and Asciidoctor 2.0.10. I've also verified that doc-diff produces the
empty output for all three programs, as expected, and that with the
MAN_KEEP_FORMATTING trick, AsciiDoc yields no diff, whereas with
Asciidoctor, we get bold literals, just like we want.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Within diff_no_index(), we have the following:
revs->diffopt.flags.exit_with_status = 1;
...
/*
* The return code for --no-index imitates diff(1):
* 0 = no changes, 1 = changes, else error
*/
return diff_result_code(&revs->diffopt, 0);
Which means when `git diff` is run in `--no-index` mode, `--exit-code`
is implied. However, the documentation for this is missing in
git-diff.txt.
Add a note about how `--exit-code` is implied in the `--no-index`
documentation to cover this documentation blindspot.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, in the event that a submodule's upstream URL changes, users
have to manually alter the URL in the .gitmodules file then run
`git submodule sync`. Let's make that process easier.
Teach submodule the set-url subcommand which will automatically change
the `submodule.$name.url` property in the .gitmodules file and then run
`git submodule sync` to complete the process.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many projects the number of contributors is low enough that users know
each other and the full email address doesn't need to be displayed.
Displaying only the author's username saves a lot of columns on the screen.
Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the
author's address as "prarit@redhat.com", which would waste columns to show
the same domain-part for all contributors when used in a project internal
to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from
the e-mail address.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The guide "gitsubmodules" was added in d480345 (submodules: overhaul
documentation, 2017-06-22), but it was not added to
command-list.txt when commit 1b81d8c (help: use command-list.txt
for the source of guides, 2018-05-20) taught "git help" to obtain the
guide list from this file.
Add it now, and capitalize the first word of the description of
gitsubmodules, as was done in 1b81d8c (help: use command-list.txt
for the source of guides, 2018-05-20) for the other guides.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hotfix application example uses `git merge --no-commit` to apply
temporary changes to the working tree during a bisect operation. In some
situations this can be a fast-forward and `merge` will apply the hotfix
branch's commits regardless of `--no-commit` (as documented in the `git
merge` manual).
In the pathological case this will make a `git bisect run` invocation
loop indefinitely between the first bisect step and the fast-forwarded
post-merge HEAD.
Add `--no-ff` to the merge command to avoid this issue.
Signed-off-by: Mihail Atanassov <m.atanassov92@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to print the object format used for input, output, or
storage. This allows shell scripts to discover the hash algorithm in
use.
Since the transition plan allows for multiple input algorithms, document
that we may provide multiple results for input, and the format that the
results may take. While we don't support this now, documenting it early
means that script authors can future-proof their scripts for when we do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove empty and redundant documentation files from the
Documentation/technical/ directory.
The empty doc files included only TODO messages with no documentation for
years. Instead an approach is being taken to keep all doc beside the code
in the relevant header files.
Having empty doc files is confusing and disappointing to anybody looking
for information, besides having the documentation in header files makes it
easier for developers to find the information they are looking for.
Some of the content which could have gone here already exists elsewhere:
- api-object-access.txt -> sha1-file.c and object.h have some details.
- api-quote.txt -> quote.h has some details.
- api-xdiff-interface.txt -> xdiff-interface.h has some details.
- api-grep.txt -> grep.h does not have enough documentation at the moment.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-config.txt into
config.h as it's easier for the developers to find the usage information
beside the code instead of looking for it in another doc file, also
documentation/technical/api-config.txt is removed because the information
it has is now redundant and it'll be hard to keep it up to date and
syncronized with the documentation in config.h
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The atomic push over smart HTTP transport did not work, which has
been corrected.
* bc/smart-http-atomic-push:
remote-curl: pass on atomic capability to remote side
If a directory in $GIT_DIR is overridden when $GIT_COMMON_DIR is set,
then usually all paths within that directory are overridden as well.
There are a couple of exceptions, though, and two of them, namely
'refs/rewritten' and 'logs/HEAD' are not mentioned in
'gitrepository-layout'. Document them as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --[no-]progress option to git multi-pack-index.
Pass the MIDX_PROGRESS flag to the subcommand functions
when progress should be displayed by multi-pack-index.
The progress feature was added to 'verify' in 144d703
("multi-pack-index: report progress during 'verify'", 2018-09-13)
but some subcommands were not updated to display progress, and
the ability to opt-out was overlooked.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing wording gives an impression that it only gives the
contents of the $GIT_DIR/rebase-apply/patch file, i.e. the patch
proper, but the option actually emits the entire e-mail message
being processed (iow, one of the output files from "git mailsplit").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the command description, including paragraph spacing.
Git URLs can accept bundle files for fetch, pull and clone, include
in that section. Include git clone in the bundle usage description.
Correct the quoting of <git-rev-list-args>.
Detail the <git-rev-list-args> options for cloning a complete repo.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
The builtin/notes.c::copy() function is prepared to handle either
one or two arguments given from the command line; when one argument
is given, to-obj defaults to HEAD.
bbb1b8a3 ("notes: check number of parameters to "git notes copy"",
2010-06-28) tried to make sure "git notes copy" (with *no* other
argument) does not dereference NULL by checking the number of
parameters, but it incorrectly insisted that we need two arguments,
instead of either one or two. This disabled the defaulting to-obj
to HEAD.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 output, when sending them to files in a designated
directory, can populate the directory with too many files; a
mechanism is introduced to set the maximum number of files and
discard further logs when the maximum is reached.
* js/trace2-cap-max-output-files:
trace2: write discard message to sentinel files
trace2: discard new traces if target directory has too many files
docs: clarify trace2 version invariants
docs: mention trace2 target-dir mode in git-config
Updates to fast-import/export.
* en/fast-imexport-nested-tags:
fast-export: handle nested tags
t9350: add tests for tags of things other than a commit
fast-export: allow user to request tags be marked with --mark-tags
fast-export: add support for --import-marks-if-exists
fast-import: add support for new 'alias' command
fast-import: allow tags to be identified by mark labels
fast-import: fix handling of deleted tags
fast-export: fix exporting a tag and nothing else
"git fetch --jobs=<n>" allowed <n> parallel jobs when fetching
submodules, but this did not apply to "git fetch --multiple" that
fetches from multiple remote repositories. It now does.
* js/fetch-jobs:
fetch: let --jobs=<n> parallelize --multiple, too
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing documentation on object walks seems to be primarily intended
as a reference for those already familiar with the procedure. This
tutorial attempts to give an entry-level guide to a couple of bare-bones
object walks so that new Git contributors can learn the concepts
without having to wade through options parsing or special casing.
The target audience is a Git contributor who is just getting started
with the concept of object walking. The goal is to prepare this
contributor to be able to understand and modify existing commands which
perform revision walks more easily, although it will also prepare
contributors to create new commands which perform walks.
The tutorial covers a basic overview of the structs involved during
object walk, setting up a basic commit walk, setting up a basic
all-object walk, and adding some configuration changes to both walk
types. It intentionally does not cover how to create new commands or
search for options from the command line or gitconfigs.
There is an associated patchset at
https://github.com/nasamuffin/git/tree/revwalk that contains a reference
implementation of the code generated by this tutorial.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original phrasing of this paragraph made at least one person stumble
over the word "from" (thinking that it was a typo and "from" was
intended), and other readers chimed in, agreeing that it was confusing:
https://public-inbox.org/git/0102016b8d597569-c1f6cfdc-cb45-4428-8737-cb1bc30655d8-000000@eu-west-1.amazonses.com/#t
Let's rewrite that paragraph for clarity.
Inspired-by-a-patch-by: Catalin Criste <cris_linu_w@yahoo.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
"git clean" fixes.
* en/clean-nested-with-ignored:
dir: special case check for the possibility that pathspec is NULL
clean: fix theoretical path corruption
clean: rewrap overly long line
clean: avoid removing untracked files in a nested git repository
clean: disambiguate the definition of -d
git-clean.txt: do not claim we will delete files with -n/--dry-run
dir: add commentary explaining match_pathspec_item's return value
dir: if our pathspec might match files under a dir, recurse into it
dir: make the DO_MATCH_SUBMODULE code reusable for a non-submodule case
dir: also check directories for matching pathspecs
dir: fix off-by-one error in match_pathspec_item
dir: fix typo in comment
t7300: add testcases showing failure to clean specified pathspecs
The markup used in user-manual has been updated to work better with
asciidoctor.
* ma/user-manual-markup-update:
user-manual.txt: render ASCII art correctly under Asciidoctor
asciidoctor-extensions.rb: handle "book" doctype in linkgit
user-manual.txt: change header notation
user-manual.txt: add missing section label
Start using DocBook 5 (instead of DocBook 4.5) as Asciidoctor 2.0
no longer works with the older one.
* bc/doc-use-docbook-5:
Documentation: fix build with Asciidoctor 2
Update support for Asciidoctor documentation toolchain.
* ma/asciidoctor-refmiscinfo:
doc-diff: replace --cut-header-footer with --cut-footer
asciidoctor-extensions: provide `<refmiscinfo/>`
Doc/Makefile: give mansource/-version/-manual attributes
The synopsis section in git-rev-list.txt has grown to be a huge list
that probably needs its own synopsis. Since the list is huge, users may
be given the false impression that the list is complete, however it is
not. It is missing many of the available options.
Since the list of options in the synopsis is not only annoying but
actively harmful, replace it with `[<options>]` so users know to
explicitly look through the documentation for further information.
While we're at it, update the optional path notation so that it is more
modern.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "discard" event type for trace2 event destinations. When the
trace2 file count check creates a sentinel file, it will include the
normal trace2 output in the sentinel, along with this new discard
event.
Writing this message into the sentinel file is useful for tracking how
often the file count check triggers in practice.
Bump up the event format version since we've added a new event type.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 can write files into a target directory. With heavy usage, this
directory can fill up with files, causing difficulty for
trace-processing systems.
This patch adds a config option (trace2.maxFiles) to set a maximum
number of files that trace2 will write to a target directory. The
following behavior is enabled when the maxFiles is set to a positive
integer:
When trace2 would write a file to a target directory, first check
whether or not the traces should be discarded. Traces should be
discarded if:
* there is a sentinel file declaring that there are too many files
* OR, the number of files exceeds trace2.maxFiles.
In the latter case, we create a sentinel file named git-trace2-discard
to speed up future checks.
The assumption is that a separate trace-processing system is dealing
with the generated traces; once it processes and removes the sentinel
file, it should be safe to generate new trace files again.
The default value for trace2.maxFiles is zero, which disables the file
count check.
The config can also be overridden with a new environment variable:
GIT_TRACE2_MAX_FILES.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it explicit that we always want trace2 "version" events to be the
first event of any trace session. Also list the changes that would or
would not cause the EVENT format version field to be incremented.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the description of trace2's target-directory behavior into the
shared trace2-target-values file so that it is included in both the
git-config and api-trace2 docs. Leave the SID discussion only in
api-trace2 since it's a technical detail.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --mark-tags, which will output mark identifiers with
each tag object. This improves the incremental export story with
--export-marks since it will allow us to record that annotated tags have
been exported, and it is also needed as a step towards supporting nested
tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export and fast-import have nice --import-marks flags which allow
for incremental migrations. However, if there is a mark in
fast-export's file of marks without a corresponding mark in the one for
fast-import, then we run the risk that fast-export tries to send new
objects relative to the mark it knows which fast-import does not,
causing fast-import to fail.
This arises in practice when there is a filter of some sort running
between the fast-export and fast-import processes which prunes some
commits programmatically. Provide such a filter with the ability to
alias pruned commits to their most recent non-pruned ancestor.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable tells "git fetch" to write the commit
graph after finishing.
* ds/commit-graph-on-fetch:
fetch: add fetch.writeCommitGraph config setting
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
Start discouraging the use of "git filter-branch".
* en/filter-branch-deprecation:
t9902: use a non-deprecated command for testing
Recommend git-filter-repo instead of git-filter-branch
t6006: simplify, fix, and optimize empty message test
The documentation and tests for "git format-patch" have been
cleaned up.
* dl/format-patch-doc-test-cleanup:
config/format.txt: specify default value of format.coverLetter
Doc: add more detail for git-format-patch
t4014: stop losing return codes of git commands
t4014: remove confusing pipe in check_threading()
t4014: use test_line_count() where possible
t4014: let sed open its own files
t4014: drop redirections to /dev/null
t4014: use indentable here-docs
t4014: remove spaces after redirect operators
t4014: use sq for test case names
t4014: move closing sq onto its own line
t4014: s/expected/expect/
t4014: drop unnecessary blank lines from test cases
This commit is similar to 379805051d ("Documentation: render revisions
correctly under Asciidoctor", 2018-05-06) and is a no-op with AsciiDoc.
When creating a literal block from an indented block without any sort of
delimiters, Asciidoctor strips off all leading whitespace, resulting in
a misrendered ASCII drawing. Use an explicit literal block to indicate
to Asciidoctor that we want to keep the leading whitespace. Drop the
common indentation for all lines to make this a no-op with AsciiDoc.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual.txt is the only file we process using the "book" doctype.
When we use AsciiDoc, user-manual.conf ensures that the linkgit macro
expands into something like
<ulink url="git-foo.html">git-foo(1)</ulink>
in user-manual.xml, which we then process into a clickable link, both in
user-manual.html and user-manual.pdf. With Asciidoctor,
user-manual.conf is ignored (this is expected) and our
Asciidoctor-specific implementation of linkgit kicks in:
<citerefentry>
<refentrytitle>git-foo</refentrytitle><manvolnum>1</manvolnum>
</citerefentry>
This eventually renders as "git-foo(1)", which is not bad, but it
doesn't turn into a link.
Teach our Asciidoctor-specific implementation of the linkgit macro that
if the doctype is "book", we should emit <ulink .../> just like we do
with AsciiDoc. While we're doing this, future-proof by supporting a
"prefix". The implementation in user-manual.conf doesn't support this,
and we don't need this for now because user-manual.txt is the only file
we process this way (and it's immediately in Documentation/).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When AsciiDoc processes user-manual.txt, it generates a book containing
chapters containing sections. So for example, we have chapter 6,
"Advanced branch management", which contains four relatively short
sections, 6.1-6.4. Asciidoctor generates a book containing *parts*
containing *chapters* instead. So part 6, "Advanced branch management"
contains four short chapters, 1-4. This looks a bit odd.
To make AsciiDoc (8.6.10) and Asciidoctor (1.5.5) handle these the same,
change from indicating chapters like so:
[[foobar]]
Foobar
======
to doing it like so:
[[foobar]]
== Foobar
Same thing for sections (line of dashes to ===), subsections (line of
tildes to ====) and subsubsections (line of carets to =====). Mark the
appendices with "[appendix]", which both AsciiDoc and Asciidoctor
understand. This means we need to drop the "Appendix X: " from their
titles, or those "Appendix X: " would be included literally in the name
of the appendix.
This commit is a no-op for AsciiDoc: The generated user-manual.xml is
identical before and after this patch. Asciidoctor now creates the same
chapter-section-subsection structure as AsciiDoc.
Changing the book title at the start of the document to similarly use
"=" instead of a line of equal signs makes no difference with any of the
engines, but let's do that change anyway for consistency.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provide a label for each chapter and section except for the "Pitfalls
with submodules" section. Since we're doing it everywhere else, let's do
it here, too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the pull command instead of push is more accurate when giving
instructions on placing the psuh command in alphabetical order.
Signed-off-by: Pedro Sousa <pedroteosousa@gmail.com>
Acked-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
A new "pre-merge-commit" hook has been introduced.
* js/pre-merge-commit-hook:
merge: --no-verify to bypass pre-merge-commit hook
git-merge: honor pre-merge-commit hook
merge: do no-verify like commit
t7503: verify proper hook execution
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
Users expect files in a nested git repository to be left alone unless
sufficiently forced (with two -f's). Unfortunately, in certain
circumstances, git would delete both tracked (and possibly dirty) files
and untracked files within a nested repository. To explain how this
happens, let's contrast a couple cases. First, take the following
example setup (which assumes we are already within a git repo):
git init nested
cd nested
>tracked
git add tracked
git commit -m init
>untracked
cd ..
In this setup, everything works as expected; running 'git clean -fd'
will result in fill_directory() returning the following paths:
nested/
nested/tracked
nested/untracked
and then correct_untracked_entries() would notice this can be compressed
to
nested/
and then since "nested/" is a directory, we would call
remove_dirs("nested/", ...), which would
check is_nonbare_repository_dir() and then decide to skip it.
However, if someone also creates an ignored file:
>nested/ignored
then running 'git clean -fd' would result in fill_directory() returning
the same paths:
nested/
nested/tracked
nested/untracked
but correct_untracked_entries() will notice that we had ignored entries
under nested/ and thus simplify this list to
nested/tracked
nested/untracked
Since these are not directories, we do not call remove_dirs() which was
the only place that had the is_nonbare_repository_dir() safety check --
resulting in us deleting both the untracked file and the tracked (and
possibly dirty) file.
One possible fix for this issue would be walking the parent directories
of each path and checking if they represent nonbare repositories, but
that would be wasteful. Even if we added caching of some sort, it's
still a waste because we should have been able to check that "nested/"
represented a nonbare repository before even descending into it in the
first place. Add a DIR_SKIP_NESTED_GIT flag to dir_struct.flags and use
it to prevent fill_directory() and friends from descending into nested
git repos.
With this change, we also modify two regression tests added in commit
91479b9c72 ("t7300: add tests to document behavior of clean and nested
git", 2015-06-15). That commit, nor its series, nor the six previous
iterations of that series on the mailing list discussed why those tests
coded the expectation they did. In fact, it appears their purpose was
simply to test _existing_ behavior to make sure that the performance
changes didn't change the behavior. However, these two tests directly
contradicted the manpage's claims that two -f's were required to delete
files/directories under a nested git repository. While one could argue
that the user gave an explicit path which matched files/directories that
were within a nested repository, there's a slippery slope that becomes
very difficult for users to understand once you go down that route (e.g.
what if they specified "git clean -f -d '*.c'"?) It would also be hard
to explain what the exact behavior was; avoid such problems by making it
really simple.
Also, clean up some grammar errors describing this functionality in the
git-clean manpage.
Finally, there are still a couple bugs with -ffd not cleaning out enough
(e.g. missing the nested .git) and with -ffdX possibly cleaning out the
wrong files (paying attention to outer .gitignore instead of inner).
This patch does not address these cases at all (and does not change the
behavior relative to those flags), it only fixes the handling when given
a single -f. See
https://public-inbox.org/git/20190905212043.GC32087@szeder.dev/ for more
discussion of the -ffd[X?] bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -d flag pre-dated git-clean's ability to have paths specified. As
such, the default for git-clean was to only remove untracked files in
the current directory, and -d existed to allow it to recurse into
subdirectories.
The interaction of paths and the -d option appears to not have been
carefully considered, as evidenced by numerous bugs and a dearth of
tests covering such pairings in the testsuite. The definition turns out
to be important, so let's look at some of the various ways one could
interpret the -d option:
A) Without -d, only look in subdirectories which contain tracked
files under them; with -d, also look in subdirectories which
are untracked for files to clean.
B) Without specified paths from the user for us to delete, we need to
have some kind of default, so...without -d, only look in
subdirectories which contain tracked files under them; with -d,
also look in subdirectories which are untracked for files to clean.
The important distinction here is that choice B says that the presence
or absence of '-d' is irrelevant if paths are specified. The logic
behind option B is that if a user explicitly asked us to clean a
specified pathspec, then we should clean anything that matches that
pathspec. Some examples may clarify. Should
git clean -f untracked_dir/file
remove untracked_dir/file or not? It seems crazy not to, but a strict
reading of option A says it shouldn't be removed. How about
git clean -f untracked_dir/file1 tracked_dir/file2
or
git clean -f untracked_dir_1/file1 untracked_dir_2/file2
? Should it remove either or both of these files? Should it require
multiple runs to remove both the files listed? (If this sounds like a
crazy question to even ask, see the commit message of "t7300: Add some
testcases showing failure to clean specified pathspecs" added earlier in
this patch series.) What if -ffd were used instead of -f -- should that
allow these to be removed? Should it take multiple invocations with
-ffd? What if a glob (such as '*tracked*') were used instead of
spelling out the directory names? What if the filenames involved globs,
such as
git clean -f '*.o'
or
git clean -f '*/*.o'
?
The current documentation actually suggests a definition that is
slightly different than choice A, and the implementation prior to this
series provided something radically different than either choices A or
B. (The implementation, though, was clearly just buggy). There may be
other choices as well. However, for almost any given choice of
definition for -d that I can think of, some of the examples above will
appear buggy to the user. The only case that doesn't have negative
surprises is choice B: treat a user-specified path as a request to clean
all untracked files which match that path specification, including
recursing into any untracked directories.
Change the documentation and basic implementation to use this
definition.
There were two regression tests that indirectly depended on the current
implementation, but neither was about subdirectory handling. These two
tests were introduced in commit 5b7570cfb4 ("git-clean: add tests for
relative path", 2008-03-07) which was solely created to add coverage for
the changes in commit fb328947c8e ("git-clean: correct printing relative
path", 2008-03-07). Both tests specified a directory that happened to
have an untracked subdirectory, but both were only checking that the
resulting printout of a file that was removed was shown with a relative
path. Update these tests appropriately.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears that the wrong option got included in the list of what will
cause git-clean to actually take action. Correct the list.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Replace "SHA-1" by "object name", the modern name for hashes.
- Correct a few grammar weaknesses.
- Do not accidentally format a phrase in teletype font where quotes are
intended.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff, log doc: say "patch text" instead of "patches"
A poster on Stackoverflow was confused that the documentation of git-log
promised to generate "patches" or "patch files" with -p, but there were
none to be found. Rewrite the corresponding paragraph to talk about
"patch text" to avoid the confusion.
Shorten the language to say "X does Y" in place of "X does not Z, but Y".
Cross-reference the referred-to commands like the rest of the file does.
Enumerate git-show because it includes the description as well.
Mention porcelain commands before plumbing commands because I guess that
the paragraph is read more frequently in their context.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous commit, AsciiDoc and Asciidoctor render the manpage
headers identically, so we no longer need the "cut the header" part of
our `--cut-header-footer` option. We do still need the "cut the footer"
part, though. The previous commits improved the rendering of the footer
in Asciidoctor by quite a bit, but the two programs still disagree on
how to format the date in the footer: 01/01/1970 vs 1970-01-01.
We could keep using `--cut-header-footer`, but it would be nice if we
had a slightly smaller hammer `--cut-footer` that would be less likely
to hide regressions. Rather than simply adding such an option, let's
also drop `--cut-header-footer`, i.e., rework it to lose the "header"
part of its name and functionality.
`--cut-header-footer` is just a developer tool and it probably has no
more than a handful of users, so we can afford to be aggressive.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen from the previous commit, there are three attributes that
we provide to AsciiDoc through asciidoc.conf. Asciidoctor ignores that
file. After that patch, newer versions of Asciidoctor pick up the
`manmanual` and `mansource` attributes as we invoke `asciidoctor`, but
they don't pick up `manversion`. ([1] says: "Not used by Asciidoctor.")
Older versions (<1.5.7) don't handle these attributes at all. As a
result, we are missing one or three `<refmiscinfo/>` tags in each
xml-file produced when we build with Asciidoctor.
Because of this, xmlto doesn't include the Git version number in the
rendered manpages. And in particular, with versions <1.5.7, the manpage
footers instead contain the fairly ugly "[FIXME: source]".
That Asciidoctor ignores asciidoc.conf is nothing new. This is why we
implement the `linkgit:` macro in asciidoc.conf *and* in
asciidoctor-extensions.rb. Follow suit and provide these tags in
asciidoctor-extensions.rb, using a "postprocessor" extension where we
just search and replace in the XML, treated as text.
We may consider a few alternatives:
* Inject these lines into the xml-files from the *Makefile*, e.g.,
using `sed`. That would reduce repetition, but it feels wrong to
impose another step and another risk on the AsciiDoc-processing only
to benefit the Asciidoctor-one.
* I tried providing a "docinfo processor" to inject these tags, but
could not figure out how to "merge" the two <refmeta/> sections that
resulted. To avoid xmlto barfing on the result, I needed to use
`xmlto --skip-validation ...`, which seems unfortunate.
Let's instead inject the missing tags using a postprocessor. We'll make
it fairly obvious that we aim to inject the exact same three lines of
`<refmiscinfo/>` that asciidoc.conf provides. We inject them in
*post*-processing so we need to do the variable expansion ourselves. We
do introduce the bug that asciidoc.conf already has in that we won't do
any escaping, e.g., of funky versions like "some v <2.25, >2.20".
The postprocessor we add here works on the XML as raw text and doesn't
really use the full potential of XML to do a more structured injection.
This is actually precisely what the Asciidoctor User Manual does in its
postprocessor example [2]. I looked into two other approaches:
1. The nokogiri library is apparently the "modern" way of doing XML
in ruby. I got it working fairly easily:
require 'nokogiri'
doc = Nokogiri::XML(output)
doc.search("refmeta").each { |n| n.add_child(new_tags) }
output = doc.to_xml
However, this adds another dependency (e.g., the "ruby-nokogiri"
package on Ubuntu). Using Asciidoctor is not our default, but it
will probably need to become so soon. Let's avoid adding a
dependency just so that we can say "search...add_child" rather than
"sub(regex...)".
2. The older REXML is apparently always(?) bundled with ruby, but I
couldn't even parse the original document:
require 'rexml/document'
doc = REXML::Document.new(output)
...
The error was "no implicit conversion of nil into String" and I
stopped there.
I don't think it's unlikely that doing a plain old search-and-replace
will work just as fine or better compared to parsing XML and worrying
about libraries and library versions.
[1] https://asciidoctor.org/docs/user-manual/#builtin-attributes
[2] https://asciidoctor.org/docs/user-manual/#postprocessor-example
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than hardcoding "Git Manual" and "Git" as the manual and source
in asciidoc.conf, provide them as attributes `manmanual` and
`mansource`. Rename the `git_version` attribute to `manversion`.
These new attribute names are not arbitrary, see, e.g., [1].
For AsciiDoc (8.6.10) and Asciidoctor <1.5.7, this is a no-op. Starting
with Asciidoctor 1.5.7, `manmanual` and `mansource` actually end up in
the xml-files and eventually in the rendered manpages. In particular,
the manpage headers now render just as with AsciiDoc.
No versions of Asciidoctor pick up the `manversion` [2], and older
versions don't pick up any of these attributes. -- We'll fix that with a
bit of a hack in the next commit.
[1] https://asciidoctor.org/docs/user-manual/#man-pages
[2] Note how [1] says "Not used by Asciidoctor".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b57e8119e6 (submodule: teach set-branch subcommand, 2019-02-08), the
`set-branch` subcommand was added for submodules. When the documentation
was written, the syntax for a "index term" in AsciiDoc was
accidentally used. This caused the documentation to be rendered as
set-branch -d|--default)|(-b|--branch <branch> [--] <path>
instead of
set-branch ((-d|--default)|(-b|--branch <branch>)) [--] <path>
In addition to this, the original documentation was possibly confusing
as it made it seem as if the `-b` option didn't accept a `<branch>`
argument.
Break `--default` and `--branch` into their own separate invocations to
make it obvious that these options are mutually exclusive. Also, this
removes the surrounding parentheses so that the "index term" syntax is
not triggered.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation toolchain has traditionally been built around DocBook
4.5. This version of DocBook is the last DTD-based version of DocBook.
In 2009, DocBook 5 was introduced using namespaces and its syntax is
expressed in RELAX NG, which is more expressive and allows a wider
variety of syntax forms.
Asciidoctor, one of the alternatives for building our documentation,
moved support for DocBook 4.5 out of core in its recent 2.0 release and
now only supports DocBook 5 in the main release. The DocBoook 4.5
converter is still available as a separate component, but this is not
available in most distro packages. This would not be a problem but for
the fact that we use xmlto, which is still stuck in the DocBook 4.5 era.
xmlto performs DTD validation as part of the build process. This is not
problematic for DocBook 4.5, which has a valid DTD, but it clearly
cannot work for DocBook 5, since no DTD can adequately express its full
syntax. In addition, even if xmlto did support RELAX NG validation,
that wouldn't be sufficient because it uses the libxml2-based xmllint to
do so, which has known problems with validating interleaves in RELAX NG.
Fortunately, there's an easy way forward: ask Asciidoctor to use its
DocBook 5 backend and tell xmlto to skip validation. Asciidoctor has
supported DocBook 5 since v0.1.4 in 2013 and xmlto has supported
skipping validation for probably longer than that.
We also need to teach xmlto how to use the namespaced DocBook XSLT
stylesheets instead of the non-namespaced ones it usually uses.
Normally these stylesheets are interchangeable, but the non-namespaced
ones have a bug that causes them not to strip whitespace automatically
from certain elements when namespaces are in use. This results in
additional whitespace at the beginning of list elements, which is
jarring and unsightly.
We can do this by passing a custom stylesheet with the -x option that
simply imports the namespaced stylesheets via a URL. Any system with
support for XML catalogs will automatically look this URL up and
reference a local copy instead without us having to know where this
local copy is located. We know that anyone using xmlto will already
have catalogs set up properly since the DocBook 4.5 DTD used during
validation is also looked up via catalogs. All major Linux
distributions distribute the necessary stylesheets and have built-in
catalog support, and Homebrew does as well, albeit with a requirement to
set an environment variable to enable catalog support.
On the off chance that someone lacks support for catalogs, it is
possible for xmlto (via xmllint) to download the stylesheets from the
URLs in question, although this will likely perform poorly enough to
attract attention. People still have the option of using the prebuilt
documentation that we ship, so happily this should not be an impediment.
Finally, we need to filter out some messages from other stylesheets that
occur when invoking dblatex in the CI job. This tool strips namespaces
much like the unnamespaced DocBook stylesheets and prints similar
messages. If we permit these messages to be printed to standard error,
our documentation CI job will fail because we check standard error for
unexpected output. Due to dblatex's reliance on Python 2, we may need
to revisit its use in the future, in which case this problem may go
away, but this can be delayed until a future patch.
The final message we filter is due to libxslt on modern Debian and
Ubuntu. The patch which they use to implement reproducible ID
generation also prints messages about the ID generation. While this
doesn't affect our current CI images since they use Ubuntu 16.04 which
lacks this patch, if we upgrade to Ubuntu 18.04 or a modern Debian,
these messages will appear and, like the above messages, cause a CI
failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a closing backtick that was placed one character too soon.
Signed-off-by: Cameron Steffen <cam.steffen94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" learned "--set-upstream" option to help those who first
clone from their private fork they intend to push to, add the true
upstream via "git remote add" and then "git fetch" from it.
* cb/fetch-set-upstream:
pull, fetch: add --set-upstream option
We promoted the "indent heuristics" that decides where to split
diff hunks from experimental to the default a few years ago, but
some stale documentation still marked it as experimental, which has
been corrected.
* sg/diff-indent-heuristic-non-experimental:
diff: 'diff.indentHeuristic' is no longer experimental
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The command line parser learned "--end-of-options" notation; the
standard convention for scripters to have hardcoded set of options
first on the command line, and force the command to treat end-user
input as non-options, has been to use "--" as the delimiter, but
that would not work for commands that use "--" as a delimiter
between revs and pathspec.
* jk/eoo:
gitcli: document --end-of-options
parse-options: allow --end-of-options as a synonym for "--"
revision: allow --end-of-options to end option parsing
This paragraph uses a lot of +pluses+ to render text as monospace. That
works fine with AsciiDoc (8.6.10), and almost fine with Asciidoctor
(1.5.5), which renders the third of these literally ("+$projname+"). The
reason seems to be that Asciidoctor trips on the lone plus a bit
earlier, even though it is escaped.
Switch +$projname+ to `$projname`, and change the next, similar instance
too (+$projname/+), because otherwise, we'd trip on /that one/ instead.
If we would stop there, we would now start falling over on the escaped
plus ('\+') mentioned earlier, rendering /it/ literally. So change that
too...
In other words, unescape the lone '+' and change all the pluses that
follow it to backticks.
AsciiDoc renders this paragraph identically before and after this
commit, and Asciidoctor now renders this the same as AsciiDoc.
I did try to switch the whole paragraph to using backticks rather than
pluses. That worked great with Asciidoctor, but confused AsciiDoc...
Let's go with this rather surgical change instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example output of `git merge-index` has been enriched by a second
"column" of helpful comments. When Asciidoctor renders this, the cells
in that second column aren't aligned.
Fix this by marking the example shell session as a code listing by
wrapping it in "----". Also drop some of the horizontal space between
the two columns so that we fit into 80 columns. This changes the
rendering with both AsciiDoc and Asciidoctor. They now render this
identically, nicely aligned, and within 80 columns.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indented lines in the example shell script listing are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example shell script as a code listing by
wrapping it in "----". Because this gives us some extra indentation, we
can remove the one that we have been carrying explicitly. That is, drop
the first tab of indentation on each line. For consistency, make the
same change to the short example shell session further down.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second "column" in the output of `git ls-remote` is typeset
differently by AsciiDoc and Asciidoctor, similar to various examples
touched by the last few commits.
Fix this by marking the example shell session as a code listing by
wrapping it in "----". Because this gives us some extra indentation, we
can remove the one that we have been carrying explicitly. That is, drop
the first tab of indentation on each line. With AsciiDoc, this results
in identical rendering before and after this commit. Asciidoctor now
renders this the same as AsciiDoc does.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indented lines in these example config-file listings are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example config-files as code listings by
wrapping them in "----". Because this gives us some extra indentation,
we can remove the one that we have been carrying explicitly. That is,
drop the first tab of indentation on each line.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
git-config.txt pretty consistently uses twelve dashes rather than the
minimum four to spell "----". Let's stick to the file-local convention
there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several graphs in this document. For most of them, we use a
single leading tab to indent the whole graph, and then we use spaces
(possibly eight or more) to align things within the graph.
In the larger graph, we use a different strategy: We use 1-N tabs and
just a small number of spaces (<8). This is how we usually prefer to do
our indenting, but Asciidoctor ends up rendering this differently from
AsciiDoc. Same thing for the if-then-fi examples where the conditional
code is indented by two tabs, which renders differently under AsciiDoc
and Asciidoctor.
Similar to 379805051d ("Documentation: render revisions correctly under
Asciidoctor", 2018-05-06), use an explicit literal block to indicate
that we want to keep the leading whitespace in the tables. Change not
just the ones that render differently, but all of them for consistency.
Because this gives us some extra indentation, we can remove the one that
we have been carrying explicitly. That is, drop the first tab of
indentation on each line. With AsciiDoc, this results in identical
rendering before and after this commit, both for git-merge-base.1 and
git-merge-base.html.
A less intrusive change would be to replace tabs 2-N on each line with
eight spaces. But let's follow the example set by 379805051d, so that we
can use our preferred way of indenting.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for each of these options contains a list. After the
list, AsciiDoc interprets the continuation as a continuation of the
*list*, not as a continution of the larger block. As a result, we get
too much indentation. Wrap the entire blocks in "--" to fix this. With
Asciidoctor, this commit is a no-op, and the two programs now render
these identically.
These two files share the same problem and indeed, they both document
`--untracked-files` in quite similar ways. I haven't checked to what
extent that is intentional or warranted, and to what extent they have
simply drifted apart. I consider such an investigation and possible
cleanup as out of scope for this commit and this patch series.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch suffers from a deluge of disguised dangers that disfigure
history rewrites (i.e. deviate from the deliberate changes). Many of
these problems are unobtrusive and can easily go undiscovered until the
new repository is in use. This can result in problems ranging from an
even messier history than what led folks to filter-branch in the first
place, to data loss or corruption. These issues cannot be backward
compatibly fixed, so add a warning to both filter-branch and its manpage
recommending that another tool (such as filter-repo) be used instead.
Also, update other manpages that referenced filter-branch. Several of
these needed updates even if we could continue recommending
filter-branch, either due to implying that something was unique to
filter-branch when it applied more generally to all history rewriting
tools (e.g. BFG, reposurgeon, fast-import, filter-repo), or because
something about filter-branch was used as an example despite other more
commonly known examples now existing. Reword these sections to fix
these issues and to avoid recommending filter-branch.
Finally, remove the section explaining BFG Repo Cleaner as an
alternative to filter-branch. I feel somewhat bad about this,
especially since I feel like I learned so much from BFG that I put to
good use in filter-repo (which is much more than I can say for
filter-branch), but keeping that section presented a few problems:
* In order to recommend that people quit using filter-branch, we need
to provide them a recomendation for something else to use that
can handle all the same types of rewrites. To my knowledge,
filter-repo is the only such tool. So it needs to be mentioned.
* I don't want to give conflicting recommendations to users
* If we recommend two tools, we shouldn't expect users to learn both
and pick which one to use; we should explain which problems one
can solve that the other can't or when one is much faster than
the other.
* BFG and filter-repo have similar performance
* All filtering types that BFG can do, filter-repo can also do. In
fact, filter-repo comes with a reimplementation of BFG named
bfg-ish which provides the same user-interface as BFG but with
several bugfixes and new features that are hard to implement in
BFG due to its technical underpinnings.
While I could still mention both tools, it seems like I would need to
provide some kind of comparison and I would ultimately just say that
filter-repo can do everything BFG can, so ultimately it seems that it
is just better to remove that section altogether.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-format-patch.txt, we were missing some key user information.
First of all, document the special value of `--base=auto`.
Next, while we're at it, surround option arguments with <> and change
existing names such as "Message-Id" to "message id", which conforms with
how existing documentation is written.
Finally, document the `format.outputDirectory` config and change
`format.coverletter` to use camel case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discovered on the mailing list, some of the descriptions of the
ff-related options were unclear. Try to be more precise with what these
options do.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
The Linux kernel receives many patches to the devicetree files each
release. The hunk header for those patches typically show nothing,
making it difficult to figure out what node is being modified without
applying the patch or opening the file and seeking to the context. Let's
add a builtin 'dts' pattern to git so that users can get better diff
output on dts files when they use the diff=dts driver.
The regex has been constructed based on the spec at devicetree.org[1]
and with some help from Johannes Sixt.
[1] https://github.com/devicetree-org/devicetree-specification/releases/latest
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the description of 'objects/pack', 'object' should be
pluralized to match the subject and agree with the
rest of the sentence.
Signed-off-by: Ben Milman <bpmilman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --set-upstream option to git pull/fetch
which lets the user set the upstream configuration
(branch.<current-branch-name>.merge and
branch.<current-branch-name>.remote) for the current branch.
A typical use-case is:
git clone http://example.com/my-public-fork
git remote add main http://example.com/project-main-repo
git pull --set-upstream main master
or, instead of the last line:
git fetch --set-upstream main master
git merge # or git rebase
This is mostly equivalent to cloning project-main-repo (which sets
upsteam) and then "git remote add" my-public-fork, but may feel more
natural for people using a hosting system which allows forking from
the web UI.
This functionality is analog to "git push --set-upstream".
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Patch-edited-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indent heuristic started out as experimental, but it's now our
default diff heuristic since 33de716387 (diff: enable indent heuristic
by default, 2017-05-08). Alas, that commit didn't update the
documentation, and the description of the 'diff.indentHeuristic'
configuration variable still implies that it's experimental and not
the default.
Update the description of 'diff.indentHeuristic' to make it clear that
it's the default diff heuristic.
The description of the related '--indent-heuristic' option has already
been updated in bab76141da (diff: --indent-heuristic is no
longer experimental, 2017-10-29).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'feature.experimental' setting includes config options that are
not committed to become defaults, but could use additional testing.
Update the following config settings to take new defaults, and to
use the repo_settings struct if not already using them:
* 'pack.useSparse=true'
* 'fetch.negotiationAlgorithm=skipping'
In the case of fetch.negotiationAlgorithm, the existing logic
would load the config option only when about to use the setting,
so had a die() statement on an unknown string value. This is
removed as now the config is parsed under prepare_repo_settings().
In general, this die() is probably misplaced and not valuable.
A test was removed that checked this die() statement executed.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The feature.manyFiles setting is suitable for repos with many
files in the working directory. By setting index.version=4 and
core.untrackedCache=true, commands such as 'git status' should
improve.
While adding this setting, modify the index version precedence
tests to check how this setting overrides the default for
index.version is unset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grammar for commits used a '?' rather than a '*' on the `merge`
directive line, despite the fact that the code allows multiple `merge`
directives in order to support n-way merges. In fact, elsewhere in
git-fast-import.txt there is an explicit declaration that "an unlimited
number of `merge` commands per commit are permitted by fast-import".
Fix the grammar to match the intent and implementation.
Reported-by: Joachim Klein <joachim.klein@automata.tools>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Analogous to commit, introduce a '--no-verify' option which bypasses the
pre-merge-commit hook. The shorthand '-n' is taken by '--no-stat'
already.
[js: * reworded commit message to reflect current state of --no-stat flag
and new hook name
* fixed flag documentation to reflect new hook name
* cleaned up trailing whitespace
* squashed test changes from the original series' patch 4/4
* modified tests to follow pattern from this series' patch 1/4
* added a test case for --no-verify with non-executable hook
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge does not honor the pre-commit hook when doing automatic merge
commits, and for compatibility reasons this is going to stay.
Introduce a pre-merge-commit hook which is called for an automatic merge
commit just like pre-commit is called for a non-automatic merge commit
(or any other commit).
[js: * renamed hook from "pre-merge" to "pre-merge-commit"
* only discard the index if the hook is actually present
* expanded githooks documentation entry
* clarified that hook should write messages to stderr
* squashed test changes from the original series' patch 4/4
* modified tests to follow new pattern from this series' patch 1/4
* added a test case for non-executable merge hooks
* added a test case for failed merges
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
* reworded commit message
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f8b863598c ("builtin/merge: honor commit-msg hook for merges", 2017-09-07)
introduced the no-verify flag to merge for bypassing the commit-msg
hook, though in a different way from the implementation in commit.c.
Change the implementation in merge.c to be the same as in commit.c so
that both do the same in the same way. This also changes the output of
"git merge --help" to be more clear that the hook return code is
respected by default.
[js: * reworded commit message
* squashed documentation changes from original series' patch 3/4
]
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that --end-of-options is available for any users of
setup_revisions() or parse_options(), which should be effectively
everywhere, we can guide people to use it for all their disambiguating
needs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Can not" suggests one has the option to not do something, whereas
"cannot" more strongly suggests something is disallowed or impossible.
Noticed "can not", mistakenly used instead of "cannot" in git help
glossary, then ran git grep 'can not' and found many other instances.
Only files in the Documentation folder were modified.
'Can not' also occurs in some source code comments and some test
assertion messages, and there is an error message and translation "can
not move directory into itself" which I may fix and submit separately
from the documentation change.
Also noticed and fixed "is does" in git help fetch, but there are no
other occurrences of that typo according to git grep.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for making "git log" use the mailmap by default.
* jc/log-mailmap-flip-defaults:
log: really flip the --mailmap default
log: flip the --mailmap default unconditionally
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but one of the callers of make_traverse_path() allocate a new heap
buffer to store the path. Let's give them an easy way to write to a
strbuf, which saves them from computing the length themselves (which is
especially tricky when they want to add to the path). It will also make
it easier for us to change the make_traverse_path() interface in a
future patch to improve its bounds-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the spelling of the new "--no-show-forced-updates" option that "git
fetch/pull" learned. Similarly, spell "--function-context" correctly and
fix a few typos, grammos and minor mistakes.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We assume that if setup_traverse_info() is passed a non-empty "base"
string, that string is pointing into a tree object and we can read the
object oid by skipping past the trailing NUL.
As it turns out, this is not true for either of the two calls, and we
may end up reading garbage bytes:
1. In git-merge-tree, our base string is either empty (in which case
we'd never run this code), or it comes from our traverse_path()
helper. The latter overallocates a buffer by the_hash_algo->rawsz
bytes, but then fills it with only make_traverse_path(), leaving
those extra bytes uninitialized (but part of a legitimate heap
buffer).
2. In unpack_trees(), we pass o->prefix, which is some arbitrary
string from the caller. In "git read-tree --prefix=foo", for
instance, it will point to the command-line parameter, and we'll
read 20 bytes past the end of the string.
Interestingly, tools like ASan do not detect (2) because the process
argv is part of a big pre-allocated buffer. So we're reading trash, but
it's trash that's probably part of the next argument, or the
environment.
You can convince it to fail by putting something like this at the
beginning of common-main.c's main() function:
{
int i;
for (i = 0; i < argc; i++)
argv[i] = xstrdup_or_null(argv[i]);
}
That puts the arguments into their own heap buffers, so running:
make SANITIZE=address test
will find problems when "read-tree --prefix" is used (e.g., in t3030).
Doubly interesting, even with the hackery above, this does not fail
prior to ea82b2a085 (tree-walk: store object_id in a separate member,
2019-01-15). That commit switched setup_traverse_info() to actually
copying the hash, rather than simply pointing to it. That pointer was
always pointing to garbage memory, but that commit started actually
dereferencing the bytes, which is what triggers ASan.
That also implies that nobody actually cares about reading these oid
bytes anyway (or at least no path covered by our tests). And manual
inspection of the code backs that up (I'll follow this patch with some
cleanups that show definitively this is the case, but they're quite
invasive, so it's worth doing this fix on its own).
So let's drop the bogus hashcpy(), along with the confusing oversizing
in merge-tree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support merge strategies in the sequencer, but only for
`pick` commands.
With this commit, we now also support them in `merge` commands. The
approach is simple: if any merge strategy option is specified, or if any
merge strategy other than `recursive` is specified, we simply spawn the
`git merge` command. Otherwise, we handle the merge in-process just as
before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been trying out a few language features outside c89; the
coding guidelines document did not talk about them and instead had
a blanket ban against them.
* jc/post-c89-rules-doc:
CodingGuidelines: spell out post-C89 rules
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
The "git clone" documentation refers to command line options in its
description in the short form; they have been replaced with long
forms to make them more recognisable.
* qn/clone-doc-use-long-form:
docs: git-clone: list short form of options first
docs: git-clone: refer to long form of options
The 'fsck.skipList' and 'fsck.<msg-id>' config variables might be
easier to discover when they are documented in 'git fsck's man page.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description about slashes in gitignore patterns (used to
indicate things like "anchored to this level only" and "only
matches directories") has been revamped.
* an/ignore-doc-update:
gitignore.txt: make slash-rules more readable
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
We have been trying out a few language features outside c89; the
coding guidelines document did not talk about them and instead had
a blanket ban against them.
* jc/post-c89-rules-doc:
CodingGuidelines: spell out post-C89 rules
The "git log" command learns to issue a warning when log.mailmap
configuration is not set and --[no-]mailmap option is not used, to
prepare users for future versions of Git that uses the mailmap by
default.
* ac/log-use-mailmap-by-default-transition:
tests: defang pager tests by explicitly disabling the log.mailmap warning
documentation: mention --no-use-mailmap and log.mailmap false setting
log: add warning for unspecified log.mailmap setting
The tips of refs from the alternate object store can be used as
starting point for reachability computation now.
* jk/check-connected-with-alternates:
check_everything_connected: assume alternate ref tips are valid
object-store.h: move for_each_alternate_ref() from transport.h
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
The commits in a repository can be described by multiple
commit-graph files now, which allows the commit-graph files to be
updated incrementally.
* ds/commit-graph-incremental:
commit-graph: test verify across alternates
commit-graph: normalize commit-graph filenames
commit-graph: test --split across alternate without --split
commit-graph: test octopus merges with --split
commit-graph: clean up chains after flattened write
commit-graph: verify chains with --shallow mode
commit-graph: create options for split files
commit-graph: expire commit-graph files
commit-graph: allow cross-alternate chains
commit-graph: merge commit-graph chains
commit-graph: add --split option to builtin
commit-graph: write commit-graph chains
commit-graph: rearrange chunk count logic
commit-graph: add base graphs chunk
commit-graph: load commit-graph chains
commit-graph: rename commit_compare to oid_compare
commit-graph: prepare for commit-graph chains
commit-graph: document commit-graph chains
"git blame" learned to "ignore" commits in the history, whose
effects (as well as their presence) get ignored.
* br/blame-ignore:
t8014: remove unnecessary braces
blame: drop some unused function parameters
blame: add a test to cover blame_coalesce()
blame: use the fingerprint heuristic to match ignored lines
blame: add a fingerprint heuristic to match ignored lines
blame: optionally track line fingerprints during fill_blame_origin()
blame: add config options for the output of ignored or unblamable lines
blame: add the ability to ignore commits and their changes
blame: use a helper function in blame_chunk()
Move oidset_parse_file() to oidset.c
fsck: rename and touch up init_skiplist()
"git multi-pack-index" learned expire and repack subcommands.
* ds/midx-expire-repack:
t5319: use 'test-tool path-utils' instead of 'ls -l'
t5319-multi-pack-index.sh: test batch size zero
midx: add test that 'expire' respects .keep files
multi-pack-index: test expire while adding packs
midx: implement midx_repack()
multi-pack-index: prepare 'repack' subcommand
multi-pack-index: implement 'expire' subcommand
midx: refactor permutation logic and pack sorting
midx: simplify computation of pack name lengths
multi-pack-index: prepare for 'expire' subcommand
Docs: rearrange subcommands for multi-pack-index
repack: refactor pack deletion for future use
Even though we have been sticking to C89, there are a few handy
features we borrow from more recent C language in our codebase after
trying them in weather balloons and saw that nobody screamed.
Spell them out.
While at it, extend the existing variable declaration rule a bit to
read better with the newly spelled out rule for the for loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log.mailmap setting may be explicitly set to false, which disables
the mailmap feature implicity. In practice, doing so is equivalent to
always using the previously undocumented --no-use-mailmap option on the
command line.
Accordingly, we document both the existence of --no-use-mailmap as
well as briefly discuss the equivalence of it to log.mailmap=False.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg --verify usage example within the 'gpg.program' variable
reference provides an incorrect example of the gpg --verify command
arguments.
The command argument order, when providing both a detached signature
and data, should be signature first and data second:
https://gnupg.org/documentation/manuals/gnupg/Operational-GPG-Commands.html
Signed-off-by: Robert Morgan <robert.thomas.morgan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git clone" documentation refers to command line options in its
description in the short form; they have been replaced with long
forms to make them more recognisable.
* qn/clone-doc-use-long-form:
docs: git-clone: list short form of options first
docs: git-clone: refer to long form of options
Correct the api-trace2 documentation, which lists "signal" as an
expected field for the signal event type, but which actually outputs
"signo" as the field name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" and "git pull" reports when a fetch results in
non-fast-forward updates to let the user notice unusual situation.
The commands learned "--no-shown-forced-updates" option to disable
this safety feature.
* ds/fetch-disable-force-notice:
pull: add --[no-]show-forced-updates passthrough
fetch: warn about forced updates in branch listing
fetch: add --[no-]show-forced-updates argument
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git fetch" that grabs from a group of remotes learned to run the
auto-gc only once at the very end.
* nd/fetch-multi-gc-once:
fetch: only run 'gc' once when fetching multiple remotes
"git rev-list --objects" learned with "--no-object-names" option to
squelch the path to the object that is used as a grouping hint for
pack-objects.
* es/rev-list-no-object-names:
rev-list: teach --no-object-names to enable piping
The conditional inclusion mechanism learned to base the choice on
the branch the HEAD currently is on.
* dl/includeif-onbranch:
config: learn the "onbranch:" includeIf condition
Dev support update to help tracing out tests.
* sg/trace2-rename:
trace2: correct typo in technical documentation
Revert "test-lib: whitelist GIT_TR2_* in the environment"
A new tag.gpgSign configuration variable turns "git tag -a" into
"git tag -s".
* tm/tag-gpgsign-config:
tag: add tag.gpgSign config option to force all tags be GPG-signed
"git branch --list" learned to show branches that are checked out
in other worktrees connected to the same repository prefixed with
'+', similar to the way the currently checked out branch is shown
with '*' in front.
* nb/branch-show-other-worktrees-head:
branch: add worktree info on verbose output
branch: update output to include worktree info
ref-filter: add worktreepath atom
List the short form of options (e.g.: '-l') before the long form (e.g.
'--local').
This is to match the doc of git-add, git-commit, git-clean, git-branch...
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the doc of git-clone easier to read,
refer to the long form of the options
(it is easier to guess what '--verbose' is doing than '-v').
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of "grep" when patterns contained a NUL-byte has always
been haphazard, and has served the vagaries of the implementation more
than anything else. A pattern containing a NUL-byte can only be
provided via "-f <file>". Since pickaxe (log search) has no such flag
the NUL-byte in patterns has only ever been supported by "grep" (and
not "log --grep").
Since 9eceddeec6 ("Use kwset in grep", 2011-08-21) patterns containing
"\0" were considered fixed. In 966be95549 ("grep: add tests to fix
blind spots with \0 patterns", 2017-05-20) I added tests for this
behavior.
Change the behavior to do the obvious thing, i.e. don't silently
discard a regex pattern and make it implicitly fixed just because they
contain a NUL-byte. Instead die if the backend in question can't
handle them, e.g. --basic-regexp is combined with such a pattern.
This is desired because from a user's point of view it's the obvious
thing to do. Whether we support BRE/ERE/Perl syntax is different from
whether our implementation is limited by C-strings. These patterns are
obscure enough that I think this behavior change is OK, especially
since we never documented the old behavior.
Doing this also makes it easier to replace the kwset backend with
something else, since we'll no longer strictly need it for anything we
can't easily use another fixed-string backend for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's been behaving so since 6a536e2076 (git: treat "git -C '<path>'"
as a no-op when <path> is empty, 2015-03-06).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a remote ref update to sha1 "X", we want to check that
we have all of the objects needed by "X". We can assume that our
repository is not currently corrupted, and therefore if we have a ref
pointing at "Y", we have all of its objects. So we can stop our
traversal from "X" as soon as we hit "Y".
If we make the same non-corruption assumption about any repositories we
use to store alternates, then we can also use their ref tips to shorten
the traversal.
This is especially useful when cloning with "--reference", as we
otherwise do not have any local refs to check against, and have to
traverse the whole history, even though the other side may have sent us
few or no objects. Here are results for the included perf test (which
shows off more or less the maximal savings, getting one new commit and
sharing the whole history):
Test HEAD^ HEAD
--------------------------------------------------------------------
[on git.git]
5600.3: clone --reference 2.94(2.86+0.08) 0.09(0.08+0.01) -96.9%
[on linux.git]
5600.3: clone --reference 45.74(45.34+0.41) 0.36(0.30+0.08) -99.2%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combining of multiple filters by simply repeating the --filter
flag. Before this patch, the user had to combine them in a single flag
somewhat awkwardly (e.g. --filter=combine:FOO+BAR), including
URL-encoding the individual filters.
To make this work, in the --filter flag parsing callback, rather than
error out when we detect that the filter_options struct is already
populated, we modify it in-place to contain the added sub-filter. The
existing sub-filter becomes the lhs of the combined filter, and the
next sub-filter becomes the rhs. We also have to URL-encode the LHS and
RHS sub-filters.
We can simplify the operation if the LHS is already a combine: filter.
In that case, we just append the URL-encoded RHS sub-filter to the LHS
spec to get the new spec.
Helped-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
an apparent typo for the environment variable was included with 81567caf87
("trace2: update docs to describe system/global config settings",
2019-04-15), and was missed when renamed variables by e4b75d6a1d
("trace2: rename environment variables to GIT_TRACE2*", 2019-05-19)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, let's remove a reference to ODB effort as the ODB
effort has been replaced by directly enhancing partial clone
and promisor remote features.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.kernel.org uses cgit, not gitweb, these days:
$ w3m -dump 'http://git.kernel.org/?p=git/git.git;a=tree;f=gitweb' | grep -w generated
generated by cgit 1.2-0.3.lf.el7 (git 2.18.0) at 2019-06-22 16:14:38 +0000
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We implement a command called git-psuh which accept arguments, so let's
show that it accepts arguments in the doc and the usage string.
While at it, we need to prepare "a NULL-terminated array of usage strings",
not just "a NULL-terminated usage string".
Helped-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description about slashes in gitignore patterns (used to
indicate things like "anchored to this level only" and "only
matches directories") has been revamped.
* an/ignore-doc-update:
gitignore.txt: make slash-rules more readable
The pattern "git diff/grep" use to extract funcname and words
boundary for Rust has been added.
* ml/userdiff-rust:
userdiff: two simplifications of patterns for rust
userdiff: add built-in pattern for rust
The --[no-]show-forced-updates option in 'git fetch' can be confusing
for some users, especially if it is enabled via config setting and not
by argument. Add advice to warn the user that the (forced update)
messages were not listed.
Additionally, warn users when the forced update check takes longer
than ten seconds, and recommend that they disable the check. These
messages can be disabled by the advice.fetchShowForcedUpdates config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After updating a set of remove refs during a 'git fetch', we walk the
commits in the new ref value and not in the old ref value to discover
if the update was a forced update. This results in two things happening
during the command:
1. The line including the ref update has an additional "(forced-update)"
marker at the end.
2. The ref log for that remote branch includes a bit saying that update
is a forced update.
For many situations, this forced-update message happens infrequently, or
is a small bit of information among many ref updates. Many users ignore
these messages, but the calculation required here slows down their fetches
significantly. Keep in mind that they do not have the opportunity to
calculate a commit-graph file containing the newly-fetched commits, so
these comparisons can be very slow.
Add a '--[no-]show-forced-updates' option that allows a user to skip this
calculation. The only permanent result is dropping the forced-update bit
in the reflog.
Include a new fetch.showForcedUpdates config setting that allows this
behavior without including the argument in every command. The config
setting is overridden by the command-line arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]ahead-behind option was introduced in fd9b544a
(status: add --[no-]ahead-behind to status and commit for V2
format, 2018-01-09). This is a necessary change of behavior
in repos where the remote tracking branches can move very
quickly ahead of the local branches. However, users need to
remember to provide the command-line argument every time.
Add a new "status.aheadBehind" config setting to change the
default behavior of all git status formats.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow easier parsing by cat-file by giving rev-list an option to print
only the OID of a non-commit object without any additional information.
This is a short-term shim; later on, rev-list should be taught how to
print the types of objects it finds in a format similar to cat-file's.
Before this commit, the output from rev-list needed to be massaged
before being piped to cat-file, like so:
git rev-list --objects HEAD | cut -f 1 -d ' ' |
git cat-file --batch-check
This was especially unexpected when dealing with root trees, as an
invisible whitespace exists at the end of the OID:
git rev-list --objects --filter=tree:1 --max-count=1 HEAD |
xargs -I% echo "AA%AA"
Now, it can be piped directly, as in the added test case:
git rev-list --objects --no-object-names HEAD | git cat-file --batch-check
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Change-Id: I489bdf0a8215532e540175188883ff7541d70e1b
Signed-off-by: Junio C Hamano <gitster@pobox.com>
