Change the gitweb tests to skip when we can't load the Time::HiRes
module.
Gitweb needs this module to work. It has been in perl core since v5.8,
which is the oldest version we support. However CentOS (and perhaps
some other distributions) carve it into its own non-core-perl package
that's not installed along with /usr/bin/perl by default. Without this
we'll hard fail the gitweb tests when trying to load the module.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the phrasing so that instead of saying that the CGI module is
unusable, we say that it's not available.
This came up on the git mailing list in
<4b34e3a0-3da7-d821-2a7f-9a420ac1d3f6@gmail.com> from Jakub Narębski.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a split-index file is created, let's update the mtime of the
shared index file that the split-index file is referencing.
In a following commit we will make shared index file expire
depending on their mtime, so updating the mtime makes sure that
the shared index file will not be deleted soon.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a commit soon, so let's make
it available globally.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new split-index and there is a big number of cache
entries in the split-index compared to the shared index, it is a
good idea to regenerate the shared index.
By default when the ratio reaches 20%, we will push back all
the entries from the split-index into a new shared index file
instead of just creating a new split-index file.
The threshold can be configured using the
"splitIndex.maxPercentChange" config variable.
We need to adjust the existing tests in t1700 by setting
"splitIndex.maxPercentChange" to 100 at the beginning of t1700,
as the existing tests are assuming that the shared index is
regenerated only when `git update-index --split-index` is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users are using `git update-index --(no-)split-index`, they
may expect the split-index feature to be used or not according to
the option they just used, but this might not be the case if the
new "core.splitIndex" config variable has been set. In this case
let's warn about what will happen and why.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make us use the split-index feature or not depending
on the value of the "core.splitIndex" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use the functions in cmd_update_index() in
builtin/update-index.c.
These functions will be used in a following commit to tweak
our use of the split-index feature depending on the setting
of a configuration variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to know
if we want to use the split index feature or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This improves test indentation by getting rid of the outdated
here document style.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a strbuf to store the subject prefix string and move its
construction into its own function. This gets rid of two arbitrary
length limits and allows the string to be added by callers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since
3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f08 (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last call to the mkstemps() function was removed in commit 659488326
("wrapper.c: delete dead function git_mkstemps()", 22-04-2016). In order
to support platforms without mkstemps(), this functionality was provided,
along with a Makefile build variable (NO_MKSTEMPS), by the gitmkstemps()
function. Remove the dead code, along with the defunct build machinery.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last caller of git_mkstemp() was removed in commit 6fec0a89
("verify_signed_buffer: use tempfile object", 16-06-2016). Since
the introduction of the 'tempfile' APIs, along with git_mkstemp_mode,
it is unlikely that new callers will materialize. Remove the dead
code.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.c supports HTTP redirects of the form
http://foo/info/refs?service=git-upload-pack
-> http://anything
-> http://bar/info/refs?service=git-upload-pack
(that is to say, as long as the Git part of the path and the query
string is preserved in the final redirect destination, the intermediate
steps can have any URL). However, if one of the intermediate steps
results in an HTTP exception, a confusing "unable to update url base
from redirection" message is printed instead of a Curl error message
with the HTTP exception code.
This was introduced by 2 commits. Commit c93c92f ("http: update base
URLs when we see redirects", 2013-09-28) introduced a best-effort
optimization that required checking if only the "base" part of the URL
differed between the initial request and the final redirect destination,
but it performed the check before any HTTP status checking was done. If
something went wrong, the normal code path was still followed, so this
did not cause any confusing error messages until commit 6628eb4 ("http:
always update the base URL for redirects", 2016-12-06), which taught
http to die if the non-"base" part of the URL differed.
Therefore, teach http to check the HTTP status before attempting to
check if only the "base" part of the URL differed. This commit teaches
http_request_reauth to return early without updating options->base_url
upon an error; the only invoker of this function that passes a non-NULL
"options" is remote-curl.c (through "http_get_strbuf"), which only uses
options->base_url for an informational message in the situations that
this commit cares about (that is, when the return value is not HTTP_OK).
The included test checks that the redirect scheme at the beginning of
this commit message works, and that returning a 502 in the middle of the
redirect scheme produces the correct result. Note that this is different
from the test in commit 6628eb4 ("http: always update the base URL for
redirects", 2016-12-06) in that this commit tests that a Git-shaped URL
(http://.../info/refs?service=git-upload-pack) works, whereas commit
6628eb4 tests that a non-Git-shaped URL
(http://.../info/refs/foo?service=git-upload-pack) does not work (even
though Git is processing that URL) and is an error that is fatal, not
silently swallowed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitdiffcore documentation quotes the term "Complete Rewrites" in
headers for no real gain. This would make sense if the term could be
easily confused if not properly grouped together. But actually, the term
is quite obvious and thus does not really need any quoting, especially
regarding that it is not used anywhere else.
But more importanly, this brings up a bug when rendering man pages: when
trying to render quotes inside of a section header, we end up with
quotes which have been misaligned to the end of line. E.g.
diffcore-break: For Splitting Up Complete Rewrites
--------------------------------------------------
renders as
DIFFCORE-BREAK: FOR SPLITTING UP COMPLETE REWRITES""
, which is obviously wrong. While this is fixable for the man pages by
using double-quotes (e.g. ""COMPLETE REWRITES""), this again breaks it
for our generated HTML pages.
So fix the issue by simply dropping quotes inside of section headers,
which is currently only done for the term "Complete Rewrites".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
"git diff -W" has been taught to handle the case where a new
function is added at the end of the file better.
* vn/xdiff-func-context:
xdiff -W: relax end-of-file function detection
The "--git-path", "--git-common-dir", and "--shared-index-path"
options of "git rev-parse" did not produce usable output. They are
now updated to show the path to the correct file, relative to where
the caller is.
* js/git-path-in-subdir:
rev-parse: fix several options when running in a subdirectory
rev-parse tests: add tests executed from a subdirectory
Code clean-up and a string truncation fix.
* mm/two-more-xstrfmt:
bisect_next_all: convert xsnprintf to xstrfmt
stop_progress_msg: convert xsnprintf to xstrfmt
Some warning() messages from "git clean" were updated to show the
errno from failed system calls.
* nd/clean-preserve-errno-in-warning:
clean: use warning_errno() when appropriate
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The preload-index code has been taught not to bother with the index
entries that are paths that are not checked out by "sparse checkout".
* jh/preload-index-skip-skip:
preload-index: avoid lstat for skip-worktree items
Code and design clean-up for the refs API.
* mh/submodule-hash:
read_loose_refs(): read refs using resolve_ref_recursively()
files_ref_store::submodule: use NULL for the main repository
base_ref_store_init(): remove submodule argument
refs: push the submodule attribute down
refs: store submodule ref stores in a hashmap
register_ref_store(): new function
refs: remove some unnecessary handling of submodule == ""
refs: make some ref_store lookup functions private
refs: reorder some function definitions
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
"git rebase -i" starts using the recently updated "sequencer" code.
* js/rebase-helper:
rebase -i: use the rebase--helper builtin
rebase--helper: add a builtin helper for interactive rebases
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
* bw/attr: (27 commits)
attr: reformat git_attr_set_direction() function
attr: push the bare repo check into read_attr()
attr: store attribute stack in attr_check structure
attr: tighten const correctness with git_attr and match_attr
attr: remove maybe-real, maybe-macro from git_attr
attr: eliminate global check_all_attr array
attr: use hashmap for attribute dictionary
attr: change validity check for attribute names to use positive logic
attr: pass struct attr_check to collect_some_attrs
attr: retire git_check_attrs() API
attr: convert git_check_attrs() callers to use the new API
attr: convert git_all_attrs() to use "struct attr_check"
attr: (re)introduce git_check_attr() and struct attr_check
attr: rename function and struct related to checking attributes
attr.c: outline the future plans by heavily commenting
Documentation: fix a typo
attr.c: add push_stack() helper
attr: support quoting pathname patterns in C style
attr.c: plug small leak in parse_attr_line()
attr.c: tighten constness around "git_attr" structure
...
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
The "negative" pathspec feature was somewhat more cumbersome to use
than necessary in that its short-hand used "!" which needed to be
escaped from shells, and it required "exclude from what?" specified.
* lt/pathspec-negative:
pathspec: don't error out on all-exclusionary pathspec patterns
pathspec magic: add '^' as alias for '!'
"git tag" did not leave useful message when adding a new entry to
reflog; this was left unnoticed for a long time because refs/tags/*
doesn't keep reflog by default.
* cw/tag-reflog-message:
tag: generate useful reflog message
Optimizes resource usage while enumerating refs from alternate
object store, to help receiving end of "push" that hosts a
repository with many "forks".
* jk/alternate-ref-optim:
receive-pack: avoid duplicates between our refs and alternates
receive-pack: treat namespace .have lines like alternates
receive-pack: fix misleading namespace/.have comment
receive-pack: use oidset to de-duplicate .have lines
add oidset API
fetch-pack: cache results of for_each_alternate_ref
for_each_alternate_ref: replace transport code with for-each-ref
for_each_alternate_ref: pass name/oid instead of ref struct
for_each_alternate_ref: use strbuf for path allocation
for_each_alternate_ref: stop trimming trailing slashes
for_each_alternate_ref: handle failure from real_pathdup()
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
