Build clean-up for "make tags" and friends.
* ab/make-tags-cleanup:
Makefile: normalize clobbering & xargs for tags targets
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Makefile: don't use "FORCE" for tags targets
Makefile: add QUIET_GEN to "cscope" target
Makefile: move ".PHONY: cscope" near its target
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
More parts of "git submodule add" has been rewritten in C.
* ar/submodule-add-more:
submodule--helper: rename compute_submodule_clone_url()
submodule--helper: remove resolve-relative-url subcommand
submodule--helper: remove add-config subcommand
submodule--helper: remove add-clone subcommand
submodule--helper: convert the bulk of cmd_add() to C
dir: libify and export helper functions from clone.c
submodule--helper: remove repeated code in sync_submodule()
submodule--helper: refactor resolve_relative_url() helper
submodule--helper: add options for compute_submodule_clone_url()
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
Update the build procedure to use the "-pedantic" build when
DEVELOPER makefile macro is in effect.
* cb/pedantic-build-for-developers:
developer: enable pedantic by default
win32: allow building with pedantic mode enabled
gettext: remove optional non-standard parens in N_() definition
The code to show progress indicator in a few code paths did not
cover between 0-100%, which has been corrected.
* ab/progress-users-adjust-counters:
entry: show finer-grained counter in "Filtering content" progress line
commit-graph: fix bogus counter in "Scanning merged commits" progress line
"git diff --submodule=diff" showed failure from run_command() when
trying to run diff inside a submodule, when the user manually
removes the submodule directory.
* dt/submodule-diff-fixes:
diff --submodule=diff: don't print failure message twice
diff --submodule=diff: do not fail on ever-initialied deleted submodules
t4060: remove unused variable
Reduce number of write(2) system calls while sending the
ref advertisement.
* jv/pkt-line-batch:
upload-pack: use stdio in send_ref callbacks
pkt-line: add stdio packet write functions
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
The tracing of process ancestry information has been enhanced.
* ab/tr2-leaks-and-fixes:
tr2: log N parent process names on Linux
tr2: do compiler enum check in trace2_collect_process_info()
tr2: leave the parent list empty upon failure & don't leak memory
tr2: stop leaking "thread_name" memory
tr2: clarify TRACE2_PROCESS_INFO_EXIT comment under Linux
tr2: remove NEEDSWORK comment for "non-procfs" implementations
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
When cloning a repository with an unborn HEAD, we'll set the local HEAD
to match it only if the local repository is non-bare. This is
inconsistent with all other combinations:
remote HEAD | local repo | local HEAD
-----------------------------------------------
points to commit | non-bare | same as remote
points to commit | bare | same as remote
unborn | non-bare | same as remote
unborn | bare | local default
So I don't think this is some clever or subtle behavior, but just a bug
in 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05). And it's
easy to see how we ended up there. Before that commit, the code to set
up the HEAD for an empty repo was guarded by "if (!option_bare)". That's
because the only thing it did was call install_branch_config(), and we
don't want to do so for a bare repository (unborn HEAD or not).
That commit put the handling of unborn HEADs into the same block, since
those also need to call install_branch_config(). But the unborn case has
an additional side effect of calling create_symref(), and we want that
to happen whether we are bare or not.
This patch just pulls all of the "figure out the default branch" code
out of the "!option_bare" block. Only the actual config installation is
kept there.
Note that this does mean we might allocate "ref" and not use it (if the
remote is empty but did not advertise an unborn HEAD). But that's not
really a big deal since this isn't a hot code path, and it keeps the
code simple. The alternative would be handling unborn_head_target
separately, but that gets confusing since its memory ownership is
tangled up with the "ref" variable.
There's just one new test, for the case we're fixing. The other ones in
the table are handled elsewhere (the unborn non-bare case just above,
and the actually-born cases in t5601, t5606, and t5609, as they do not
require v2's "unborn" protocol extension).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Not sure what happened, but the comment is describing code elsewhere in
the file. Fix the comment to actually discuss the code that follows.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 84e4484f12 (commit-graph: use parse_options_concat(), 2021-08-23) we
unified common options of commit-graph's subcommands into a single
"common_opts" array.
But 84e4484f12 introduced a behavior change which is to accept the
"--[no-]progress" option before any sub-commands, e.g.,
git commit-graph --progress write ...
Prior to that commit, the above would error out with "unknown option".
There are two issues with this behavior change. First is that the
top-level --[no-]progress is not always respected. This is because
isatty(2) is performed in the sub-commands, which unconditionally
overwrites any --[no-]progress that was given at the top-level.
But the second issue is that the existing sub-commands of commit-graph
only happen to both have a sensible interpretation of what `--progress`
or `--no-progress` means. If we ever added a sub-command which didn't
have a notion of progress, we would be forced to ignore the top-level
`--[no-]progress` altogether.
Since we haven't released a version of Git that supports --[no-]progress
as a top-level option for `git commit-graph`, let's remove it.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option `rebase.forkpoint' is only mentioned in the man
page of git-config(1). Since it is a configuration for rebase, mention
it in the documentation of rebase at the --fork-point/--no-fork-point
section. This will help users set a preferred default for their
workflow.
Signed-off-by: Wesley Schwengle <wesley@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert test helper to use `start_bg_command()` when spawning a server
daemon in the background rather than blocks of platform-specific code.
Also, while here, remove _() translation around error messages since
this is a test helper and not Git code.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a variation of `run_command()` and `start_command()` to launch a command
into the background and optionally wait for it to become "ready" before returning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set an ACL on the named pipe to allow the well-known group EVERYONE
to read and write to the IPC server's named pipe. In the event that
the daemon was started with elevation, allow non-elevated clients
to communicate with the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create "ipc-debug" category events to log unexpected errors
when creating Simple-IPC connections.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declartion of the `enum ipc_active_state` type outside of
the SUPPORTS_SIMPLE_IPC ifdef.
A later commit will introduce the `fsmonitor_ipc__*()` API and stub in
a "mock" implementation that requires this enum in some function
signatures.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `command_len` argument to the Simple IPC API.
In my original Simple IPC API, I assumed that the request would always
be a null-terminated string of text characters. The `command`
argument was just a `const char *`.
I found a caller that would like to pass a binary command to the
daemon, so I am amending the Simple IPC API to receive `const char
*command, size_t command_len` arguments.
I considered changing the `command` argument to be a `void *`, but the
IPC layer simply passes it to the pkt-line layer which takes a `const
char *`, so to avoid confusion I left it as is.
Note, the response side has always been a `struct strbuf` which
includes the buffer and length, so we already support returning a
binary answer. (Yes, it feels a little weird returning a binary
buffer in a `strbuf`, but it works.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Released[0] after a long beta period and including several additional
zero/double width characters.
[0] https://home.unicode.org/announcing-the-unicode-standard-version-14-0/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we both can propagate values from the hashcache, and respect
the configuration to enable the hashcache at all, test that both of
these function correctly by hardening their behavior with a test.
Like the hash-cache in classic single-pack bitmaps, this helps more
proportionally the more up-to-date your bitmap coverage is. When our
bitmap coverage is out-of-date with the ref tips, we spend more time
proportionally traversing, and all of that traversal gets the name-hash
filled in.
But for the up-to-date bitmaps, this helps quite a bit. These numbers
are on git.git, with `pack.threads=1` to help see the difference
reflected in the overall runtime.
Test origin/tb/multi-pack-bitmaps HEAD
-------------------------------------------------------------------------------------
5326.4: simulated clone 1.87(1.80+0.07) 1.46(1.42+0.03) -21.9%
5326.5: simulated fetch 2.66(2.61+0.04) 1.47(1.43+0.04) -44.7%
5326.6: pack to file (bitmap) 2.74(2.62+0.12) 1.89(1.82+0.07) -31.0%
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To help test the performance of permuting the contents of the hash-cache
when generating a MIDX bitmap, we need a bitmap which has its hash-cache
populated.
And since multi-pack bitmaps don't add *new* values to the hash-cache,
we have to rely on a single-pack bitmap to generate those values for us.
Therefore, generate a pack bitmap before the MIDX one in order to ensure
that the MIDX bitmap has entries in its hash-cache. Since we don't want
to time generating the pack bitmap, move that to a non-perf test run
before we try to generate the MIDX bitmap.
Likewise, get rid of the pack bitmap afterwords, to make certain that we
are not accidentally using it in the performance tests run later on.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few typos and alignment issues, and while at it update the
example hashes to show most of the ones available in recent crypt(3).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of crypt(3) will return NULL when passed an unsupported
hash type (ex: OpenBSD with DES), so check for undef instead of using
it directly.
Also use this to probe the system and select a better hash function in
the tests, so it can pass successfully.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
[jc: <CAPUEspjqD5zy8TLuFA96usU7FYi=0wF84y7NgOVFqegtxL9zbw@mail.gmail.com>]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c057bad370 (git-cvsserver: use a password file cvsserver pserver,
2010-05-15) adds a way for `git cvsserver` to provide authenticated
pserver accounts without having clear text passwords, but uses the
username instead of the password to the call for crypt(3).
Correct that, and make sure the documentation correctly indicates how
to obtain hashed passwords that could be used to populate this
configuration, as well as correcting the hash that was used for the
tests.
This change will require that any user of this feature updates the
hashes in their configuration, but has the advantage of using a more
similar format than cvs uses, probably also easying any migration.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9af0b8dbe2 (t0000-basic: more commit-tree tests., 2006-04-26) adds
tests for commit-tree that mask the return exit from git as described
in a378fee5b0 (Documentation: add shell guidelines, 2018-10-05).
Fix the tests, to avoid pipes by using a temporary file instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b8ba412bf7 (tree-diff: avoid alloca for large allocations, 2016-06-07)
adds a way to route some bigger allocations out of the stack and free
them through the addition of two conveniently named macros, but leaves
the calls to free the xalloca part, which could be also in the heap,
if the system doesn't HAVE_ALLOCA_H (ex: macOS and other BSD).
Add the missing free call, xalloca_free(), which is a noop if we
allocated memory in the stack frame, but a real free() if we
allocated in the heap instead, and while at it, change the expression
to match in both macros for ease of readability.
This avoids a leak reported by LSAN while running t0000 but that
wouldn't fail the test (which is fixed in the next patch):
SUMMARY: LeakSanitizer: 1034 byte(s) leaked in 15 allocation(s).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Time complexities for pack_pos_to_midx and midx_to_pack_pos are swapped,
correct it.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that optionally creates the *.rev reverse index file has
been optimized to avoid needless computation when it is not writing
the file out.
* ab/reverse-midx-optim:
pack-write: skip *.rev work when not writing *.rev
"make INSTALL_STRIP=-s install" allows the installation step to use
"install -s" to strip the binaries as they get installed.
* bs/install-strip:
make: add INSTALL_STRIP option variable
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
