Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When name-rev needs to format an actual name, we do so into
a fixed-size buffer. That includes the actual ref tip, as
well as any traversal information. Since refs can exceed
1024 bytes, this means you can get a bogus result. E.g.,
doing:
git tag $(perl -e 'print join("/", 1..1024)')
git describe --contains HEAD^
results in ".../282/283", when it should be
".../1023/1024~1".
We can solve this by using a heap buffer. We'll use a
strbuf, which lets us write into the same buffer from our
loop without having to reallocate.
Signed-off-by: Jeff King <peff@peff.net>
Extend git-name-rev to support excluding refs which match shell patterns
using --exclude. These patterns can be used to limit the scope of refs
by excluding any ref that matches one of the --exclude patterns. A ref
will only be used for naming when it matches at least one --refs pattern
but does not match any of the --exclude patterns. Thus, --exclude
patterns are given precedence over --refs patterns.
For example, suppose you wish to name a series of commits based on an
official release tag of the form "v*" but excluding any pre-release tags
which match "*rc*". You can use the following to do so:
git name-rev --refs="v*" --exclude="*rc*" --all
Add tests and update Documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git name-rev to take multiple --refs stored as a string list of
patterns. The list of patterns will be matched inclusively, and each ref
only needs to match one pattern to be included. A ref will only be
excluded if it does not match any of the given patterns. Additionally,
if any of the patterns would allow abbreviation, then we will abbreviate
the ref, even if another pattern is more strict and would not have
allowed abbreviation on its own.
Add tests and documentation for this change. The tests expected output
is dynamically generated. This is in order to avoid hard-coding
a commit object name in the test results (as the expected output is to
simply leave the commit object unnamed).
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
We most likely want the oldest tag that contained the commit to be
reported. So let's remember the taggerdate, and make it more important
than anything else when choosing the best name for a given commit.
Suggested by Linus Torvalds.
Note that we need to update t9903 because it tested for the old behavior
(which preferred the description "b1~1" over "tags/t2~1").
We might want to introduce a --heed-taggerdate option, and make the new
behavior dependent on that, if it turns out that some scripts rely on the
old name-rev method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
The manual size computations here are correct, but using
strip_suffix makes that obvious, and hopefully communicates
the intent of the code more clearly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common pattern to do:
foo = xmalloc(strlen(one) + strlen(two) + 1 + 1);
sprintf(foo, "%s %s", one, two);
(or possibly some variant with strcpy()s or a more
complicated length computation). We can switch these to use
xstrfmt, which is shorter, involves less error-prone manual
computation, and removes many sprintf and strcpy calls which
make it harder to audit the code for real buffer overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to get manual allocation calculations wrong, and
the use of strcpy/strcat raise red flags for people looking
for buffer overflows (though in this case each site was
fine).
It's also shorter to use xstrfmt, and the printf-format
tends to be easier for a reader to see what the final string
will look like.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
The parse_commit function will check the "parsed" flag of
the object and do nothing if it is set. There is no need
for callers to check the flag themselves, and doing so only
clutters the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the variables are set by OPT_BOOL, which makes sure
to have the values being 0 or 1 after parsing, we do not need
the double negation to map any other value to 1 for integer
variables.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" takes a commit and gives it a name based on tags in
its neighbourhood. The command does take a commit-ish but when
given a tag that points at a commit, it should dereference the tag
before computing the name for the commit.
As the whole processing is internally delegated to name-rev, if we
unwrap tags down to the underlying commit when invoking name-rev, it
will make the name-rev issue an error message based on the unwrapped
object name (i.e. either 40-hex object name, or "$tag^0") that is
different from what the end-user gave to the command when the commit
cannot be described. Introduce an internal option --peel-tag to the
name-rev to tell it to unwrap a tag in its input from the command
line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev --stdin" has been fixed to convert an object name that
points at a tag to a refname of the tag. The codepath to handle its
command line arguments, however, fed the commit that the tag points
at to the underlying naming machinery.
With this fix, you will get this:
$ git name-rev --refs=tags/\* --name-only $(git rev-parse v1.8.3 v1.8.3^0)
v1.8.3
v1.8.3^0
which is the same as what you would get from the fixed "--stdin" variant:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --refs=tags/\* --name-only
v1.8.3
v1.8.3^0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev" is supposed to convert given object names into
strings that name the same objects based on refs, that can be fed to
"git rev-parse" to get the same object names back, so the output for
the commit object v1.8.3^0 (i.e. the commit tagged as v1.8.3)
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --stdin
8af06057d0c31a24e8737ae846ac2e116e8bafb9
edca415256 (tags/v1.8.3^0)
has to have "^0" at the end, as "edca41" is a commit, not the tag
that references it. But we do not get anything for the tag object
(8af0605) itself.
This is because the command however did not bother to see if the
object is at the tip of some ref, and failed to convert a tag
object.
Teach it to show this instead:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --stdin
8af06057d0c31a24e8737ae846ac2e116e8bafb9 (tags/v1.8.3)
edca415256 (tags/v1.8.3^0)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an user wants to filter specific ref using the --refs option,
the pattern needs to match the full ref, e.g. --refs=refs/tags/v1.*.
It'd be convenient to specify a subpath of ref pattern. For
example, --refs=origin/* can find refs/remotes/origin/master by
searching the pattern against its substrings in turn:
refs/remotes/origin/master
remotes/origin/master
origin/master
If it finds a match in a subpath, unambigous part of the ref path will
be removed in the output.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give each mode of operation (all, from stdin, given commits) its own usage
line to make it easier to see that they are mutually exclusive.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
