This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It turns out that pickaxe reads the same blob repeatedly while
blame can reuse the blob already read for the parent when
handling a child commit when it's parent's turn to pass its
blame to the grandparent. Have a cache in the origin structure
to keep the blob there, which will be garbage collected when the
origin loses the last reference to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Remove unsupported C99 style struct initializers in git-archive.
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Use ULONG_MAX rather than implicit cast of -1.
At least one older version of the Solaris C compiler doesn't support
the newer C99 style struct initializers. To allow Git to compile
on those systems use an archive description struct which is easier
to initialize without the C99 struct initializer syntax.
Also since the archives array is not used by anyone other than
archive.c we can make it static.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some platforms (Solaris in particular) appear to require -lz as
part of the link line for git-daemon, due to it linking against
sha1_file.o and that module requiring inflate/deflate support.
So its time to retire SIMPLE_PROGRAMS and move its last remaining
member into the standard PROGRAMS list, allowing it to link against
all libraries used by the rest of Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At least one (older) version of the Solaris C compiler won't allow
'unsigned long x = -1' without explicitly casting -1 to a type of
unsigned long. So instead use ULONG_MAX, which is really the
correct constant anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we introduced the cached origin per commit, we gave up proper
garbage collecting because it meant that commits hold onto their
cached copy. There is no need to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reason to do this is the same as in the previous change for
line copy detection within the same file (-M).
Also this fixes -C and -C -C (aka find-copies-harder) logic; in
this application we are not interested in the similarity
matching diffcore-rename makes, because we are only interested
in scanning files that were modified, or in the case of -C -C,
scanning all files in the parent and we want to do that
ourselves.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would miss copied lines that are contained in the
parts before or after the part that we find after splitting the
blame_entry (i.e. split[0] and split[2]).
Signed-off-by: Junio C Hamano <junkio@cox.net>
If more than one parents in an Octopus merge have the same
origin, ignore later ones because it would not make any
difference in the outcome.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The idea is that we are interested in renaming into only one path, so
we do not care about renames that happen elsewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We deduced a GNU diff output that does not use /dev/null convention
as creation (deletion) diff correctly by looking at the lack of context
and deleted lines (added lines), but forgot to reset the new (old) name
field properly.
This was a regression when we added a workaround for --unified=0 insanity.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this change we get a wrong $pfxlen value and the check_export_ok()
checks with with a wrong directory name. Without this patch the below
$projects_list fails with gitweb
$projects_list = "/tmp/a/b/";
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes both git-fetch and git-push (fetch-pack and receive-pack)
safe against a possible race with aparallel git-repack -a -d that could
prune the new pack while it is not yet referenced, and remove the .keep
file after refs have been updated.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If by chance we receive a pack which content (list of objects) matches
another pack that we already have, and if that pack is marked with a
.keep file, then we should not overwrite it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since functions in fetch-clone.c were only used from fetch-pack.c,
its content has been merged with fetch-pack.c. This allows for better
coupling of features with much simpler implementations.
One new thing is that the (abscence of) --thin also enforce it on
index-pack now, such that index-pack will abort if a thin pack was
_not_ asked for.
The -k or --keep, when provided twice, now causes the fetched pack
to be left as a kept pack just like receive-pack currently does.
Eventually this will be used to close a race against concurrent
repacking.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some applications which invoke unpack-objects or index-pack --stdin
may want to examine the pack header to determine the number of
objects contained in the pack and use that value to determine which
executable to invoke to handle the rest of the pack stream.
However if the caller consumes the pack header from the input stream
then its no longer available for unpack-objects or index-pack --stdin,
both of which need the version and object count to process the stream.
This change introduces --pack_header=ver,cnt as a command line option
that the caller can supply to indicate it has already consumed the
pack header and what version and object count were found in that
header. As this option is only meant for low level applications
such as receive-pack we are not documenting it at this time.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (90 commits)
gitweb: Better support for non-CSS aware web browsers
gitweb: Output also empty patches in "commitdiff" view
gitweb: Use git-for-each-ref to generate list of heads and/or tags
for-each-ref: "creator" and "creatordate" fields
Add --global option to git-repo-config.
pack-refs: Store the full name of the ref even when packing only tags.
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Remove uneccessarily similar printf() from print_ref_list() in builtin-branch
pack-objects doesn't create random pack names
branch: work in subdirectories.
gitweb: Use 's' regexp modifier to secure against filenames with LF
gitweb: Secure against commit-ish/tree-ish with the same name as path
gitweb: esc_html() author in blame
git-svnimport: support for partial imports
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
Move deny_non_fast_forwards handling completely into receive-pack.
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
...
Add option to replace SPC (' ') with hard (non-breakable) space HTML
entity ' ' in esc_html subroutine.
Replace ' ' with ' ' for the code/diff display part in git_blob
and git_patchset_body; this is to be able to view code and diffs in
web browsers which doesn't understand "white-space: pre;" CSS
declaration.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove skipping over empty patches (i.e. patches which consist solely
of extended headers) in git_patchset_body, and add links to those
header-only patches in git_difftree_body (but not generate blobdiff
links when there were no change in file contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/keep-pack: (29 commits)
Remove unused variable in receive-pack.
Teach git-index-pack how to keep a pack file.
Only repack active packs by skipping over kept packs.
Allow short pack names to git-pack-objects --unpacked=.
git-send-email: Read the default SMTP server from the GIT config file
git-send-email: Document support for local sendmail instead of SMTP server
Swap the porcelain and plumbing commands in the git man page
Mention that pull can work locally in the synopsis
gitweb: Add "next" link to commitdiff view
gitweb: Move git_get_last_activity subroutine earlier
Documentation: fix git-format-patch mark-up and link it from git.txt
Documentation: Update information about <format> in git-for-each-ref
Bash completion support for aliases
gitweb: Fix up bogus $stylesheet declarations
tests: merge-recursive is usable without Python
gitweb: Check git base URLs before generating URL from it
Documentation: add git in /etc/services.
Documentation: add upload-archive service to git-daemon.
git-cherry: document limit and add diagram
diff-format.txt: Correct information about pathnames quoting in patch format
...
* maint:
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Add two subroutines: git_get_heads_list and git_get_refs_list, which
fill out needed parts of refs info (heads and tags respectively) info
using single call to git-for-each-ref, instead of using
git-peek-remote to get list of references and using parse_ref for each
ref to get ref info, which in turn uses at least one call of git
command.
Replace call to git_get_refs_list in git_summary by call to
git_get_references, git_get_heads_list and git_get_tags_list
(simplifying this subroutine a bit). Use git_get_heads_list in
git_heads and git_get_tags_list in git_tags. Modify git_tags_body
slightly to accept output from git_get_tags_list.
Remove no longer used, and a bit hackish, git_get_refs_list.
parse_ref is no longer used, but is left for now.
Generating "summary" and "tags" views should be much faster for
projects which have large number of tags.
CHANGES IN OUTPUT: Before, if ref in refs/tags was tag pointing to
commit we used committer epoch as epoch for ref, and used tagger epoch
as epoch only for tag pointing to object of other type. If ref in
refs/tags was commit, we used committer epoch as epoch for ref (see
parse_ref; we sorted in gitweb by 'epoch' field).
Currently we use committer epoch for refs pointing to commit objects,
and tagger epoch for refs pointing to tag object, even if tag points
to commit.
Simple ab benchmark before and after this patch for my git.git
repository (git/jnareb-git.git) with some heads and tags added
as compared to git.git repository, shows around 2.4-3.0 times speedup
for "summary" and "tags" views:
summary 3134 +/- 24.2 ms --> 1081 +/- 30.2 ms
tags 2886 +/- 18.9 ms --> 1196 +/- 15.6 ms
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "creator" (which is parallel to "tagger" or "committer")
and "creatordate" (corresponds to "taggerdate" and
"committerdate").
As other "date" fields, "creatordate" sorts numerically
and displays human readably. This allows for example for
sorting together heavyweigth and lightweight tags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Allow user to set variables in global ~/.gitconfig file
using command line.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using for_each_tag_ref() to enumerate tags is wrong since it removes
the refs/tags/ prefix, we need to always use for_each_ref() and filter
out non-tag references in the callback.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"what you are going to commit is" doesn't need the "is" and does need a comma.
"can trivially see" is an unecessary split infinitive and "easily" is a more
appropriate adverb.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
