* maint-1.6.4:
Fix mis-backport of t7002
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
* maint-1.6.3:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
The original patch that became cfe370c (grep: do not segfault when -f is
used, 2009-10-16), was made against "maint" or newer branch back then, but
the fix addressed the issue that was present as far as in 1.6.4 series.
The maintainer backported the patch to the 1.6.4 maintenance branch, but
failed to notice that the new tests assumed the setup done by the script
in "maint", which did quite a lot more than the same test script in 1.6.4
series, and the output didn't match the expected result.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --set-upstream option to branch that works like --track, except that
when branch exists already, its upstream info is changed without changing
the ref value.
Based-on-patch-from: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitdiff_verify_name() only did a filename prefix check because of an
off-by-one error.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'git remote set-url' for changing URL of remote repository with
one "porcelain-level" command.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_name() wrongly returned the whole filename for filenames without
enough leading pathname components (e.g., when applying a patch to a
top-level file with -p2).
Include the -p value used in the error message when no filenames can be
found.
[jc: squashed a test from Nanako Shiraishi]
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tests the configurable -Xsubtree feature of merge-recursive.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs the usual sq then eval trick to allow IFS characters
in the option.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "-X <option>" command line argument to "git merge" that is passed to
strategy implementations. "ours" and "theirs" autoresolution introduced
by the previous commit can be asked to the recursive strategy.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/commit-status:
t7502: test commit.status, --status and --no-status
commit: support commit.status, --status, and --no-status
Conflicts:
Documentation/git-commit.txt
builtin-commit.c
* tc/clone-v-progress:
clone: use --progress to force progress reporting
clone: set transport->verbose when -v/--verbose is used
git-clone.txt: reword description of progress behaviour
check stderr with isatty() instead of stdout when deciding to show progress
Conflicts:
transport.c
* tc/smart-http-restrict:
Test t5560: Fix test when run with dash
Smart-http tests: Test http-backend without curl or a webserver
Smart-http tests: Break test t5560-http-backend into pieces
Smart-http tests: Improve coverage in test t5560
Smart-http: check if repository is OK to export before serving it
* jk/run-command-use-shell:
t4030, t4031: work around bogus MSYS bash path conversion
diff: run external diff helper with shell
textconv: use shell to run helper
editor: use run_command's shell feature
run-command: optimize out useless shell calls
run-command: convert simple callsites to use_shell
t0021: use $SHELL_PATH for the filter script
run-command: add "use shell" option
* sr/gfi-options:
fast-import: add (non-)relative-marks feature
fast-import: allow for multiple --import-marks= arguments
fast-import: test the new option command
fast-import: add option command
fast-import: add feature command
fast-import: put marks reading in its own function
fast-import: put option parsing code in separate functions
When the configuration variable status.submodulesummary is not 0 or
false, "git status" shows the submodule summary of the staged submodule
commits. But it did not show the summary of those commits not yet
staged in the supermodule, making it hard to see what will not be
committed.
The output of "submodule summary --for-status" has been changed from
"# Modified submodules:" to "# Submodule changes to be committed:" for
the already staged changes. "# Submodules changed but not updated:" has
been added for changes that will not be committed. This is much clearer
and consistent with the output for regular files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A diff run in superproject only compares the name of the commit object
bound at the submodule paths. When we compare with a work tree and the
checked out submodule directory is dirty (e.g. has either staged or
unstaged changes, or has new files the user forgot to add to the index),
show the work tree side as "dirty".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now a submodule only then showed up as modified in the supermodule
when the last commit in the submodule differed from the one in the index
or the diffed against commit of the superproject. A dirty work tree
containing new untracked or modified files in a submodule was
undetectable when looking at it from the superproject.
Now git status and git diff (against the work tree) in the superproject
will also display submodules as modified when they contain untracked or
modified files, even if the compared ref matches the HEAD of the
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frequent complaint is lack of easy way to set up upstream (tracking)
references for git pull to work as part of push command. So add switch
--set-upstream (-u) to do just that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing what happens on unmerged entries, the HEAD is the
commit we are starting from before the merge that fails and create
the unmerged entries. It is not the commit before.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A command invocation preceded by variable assignments, i.e.
VAR1=VAL1 VAR2=VAL2 ... command args
are implemented by dash and ksh in such a way not to export these
variables, and keep the values after the command finishes, when the
command is a shell function. POSIX.1 "2.9.5 Function Definition Command"
specifies this behaviour.
Many shells however treat this construct the same way as they are calling
external commands. They export the variables during the duration of
command, and resets their values after command returns.
The test relied on the behaviour of the latter kind.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was not possible to pass quoted commands to '--extcmd'.
By using 'eval' we ensure that expressions with spaces and
quotes are supported.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds '-x' as a shorthand for the '--extcmd' option.
Arguments to '--extcmd' can be specified separately, which
was not originally possible.
This also fixes the brief help text so that it mentions
both '-x' and '--extcmd'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of running 'grep', 'echo', and 'wc' we simply compare
git-difftool's output against a known good value.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like some people wanted diff features that are not found in
other people's diff implementations outside of a git repository
and added --no-index mode to the command, this adds --no-index mode
to the "git grep" command.
Also, inside a git repository, --no-index mode allows you to grep
in untracked (but not ignored) files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few cases of user identity information that we consider
interesting:
(1) When the author and committer identities do not match.
(2) When the committer identity was picked automatically from the
username, hostname and GECOS information.
In these cases, we already show the information in the commit
message template. However, users do not always see that template
because they might use "-m" or "-F". With this patch, we show these
interesting cases after the commit, along with the subject and
change summary. The new output looks like:
$ git commit \
-m "federalist papers" \
--author='Publius <alexander@hamilton.com>'
[master 3d226a7] federalist papers
Author: Publius <alexander@hamilton.com>
1 files changed, 1 insertions(+), 0 deletions(-)
for case (1), and:
$ git config --global --unset user.name
$ git config --global --unset user.email
$ git commit -m foo
[master 7c2a927] foo
Committer: Jeff King <peff@c-71-185-130-222.hsd1.va.comcast.net>
Your name and email address were configured automatically based
on your username and hostname. Please check that they are accurate.
You can suppress this message by setting them explicitly:
git config --global user.name Your Name
git config --global user.email you@example.com
If the identity used for this commit is wrong, you can fix it with:
git commit --amend --author='Your Name <you@example.com>'
1 files changed, 1 insertions(+), 0 deletions(-)
for case (2).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only way to safely quote arbitrary text in a pretty-print user
format is to replace instances of "%" with "%x25". This is slightly
unreadable, and many users would expect "%%" to produce a single
"%", as that is what printf format specifiers do.
This patch converts "%%" to "%" for all users of strbuf_expand():
(1) git-daemon interpolated paths
(2) pretty-print user formats
(3) merge driver command lines
Case (1) was already doing the conversion itself outside of
strbuf_expand(). Case (2) is the intended beneficiary of this patch.
Case (3) users probably won't notice, but as this is user-facing
behavior, consistently providing the quoting mechanism makes sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a squash/fixup fails due to a conflict, the user is required to
edit the commit message. Previously, if further squash/fixup commands
followed the conflicting squash/fixup, this user-edited message was
discarded and a new automatically-generated commit message was
suggested.
Change the handling of conflicts within squash/fixup command series:
Whenever the user is required to intervene, consider the resulting
commit to be a new basis for the following squash/fixups and use its
commit message in later suggested combined commit messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...and reuse these pre-created branches in tests rather than creating
duplicates.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "rebase -i" commands include a series of fixup commands without
any squash commands, then commit the combined commit using the commit
message of the corresponding "pick" without starting up the
commit-message editor.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the numeral "2" instead of the word "two" when two commits are
being interactively squashed. This makes the treatment consistent
with that for higher numbers of commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line of commit messages generated for "rebase -i"
squash/fixup commits includes a count of the number of commits that
are being combined. Add machinery to check that this count is
correct, and add such a check to some test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Make sure that the status information:
- is shown as before without configuration nor command line option;
- is shown if commit.status is set to true and no command line option
is given, or --status is explicitly given;
- is not shown if commit.status is set to false and no command line
option is given, or --no-status is explicitly given.
Also make sure that the way lines taken from the custom --template appear
in the log message editor is not changed at all.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
A new notation '<branch>@{upstream}' refers to the branch <branch> is set
to build on top of. Missing <branch> (i.e. '@{upstream}') defaults to the
current branch.
This allows you to run, for example,
for l in list of local branches
do
git log --oneline --left-right $l...$l@{upstream}
done
to inspect each of the local branches you are interested in for the
divergence from its upstream.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands refuse to run in the presence of conflicts (commit,
merge, pull, cherry-pick/revert). They all used to provide rough, and
inconsistant error messages.
A new variable advice.resolveconflict is introduced, and allows more
verbose messages, pointing the user to the appropriate solution.
For commit, the error message used to look like this:
$ git commit
foo.txt: needs merge
foo.txt: unmerged (c34a92682e0394bc0d6f4d4a67a8e2d32395c169)
foo.txt: unmerged (3afcd75de8de0bb5076942fcb17446be50451030)
foo.txt: unmerged (c9785d77b76dfe4fb038bf927ee518f6ae45ede4)
error: Error building trees
The "need merge" line is given by refresh_cache. We add the IN_PORCELAIN
option to make the output more consistant with the other porcelain
commands, and catch the error in return, to stop with a clean error
message. The next lines were displayed by a call to cache_tree_update(),
which is not reached anymore if we noticed the conflict.
The new output looks like:
U foo.txt
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree, and then use 'git add/rm <file>' as
appropriate to mark resolution and make a commit, or use 'git commit -a'.
Pull is slightly modified to abort immediately if $GIT_DIR/MERGE_HEAD
exists instead of waiting for merge to complain.
The behavior of merge and the test-case are slightly modified to reflect
the usual flow: start with conflicts, fix them, and afterwards get rid of
MERGE_HEAD, with different error messages at each stage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(For testing "rebase -i"): Support new action types in $FAKE_LINES to
allow comments and blank lines to be added to the "rebase -i" command
list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(For testing "rebase -i"): Output the "rebase -i" command script
before and after the edits, to make it clearer what the editor did.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the unlink_entry function to use rmdir to remove submodule
directories. Currently we try to use unlink, which will never succeed.
Of course rmdir will only succeed for empty (i.e. not checked out)
submodule directories. Behaviour if a submodule is checked out stays
essentially the same: print a warning message and keep the submodule
directory.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After you find out an earlier resolution you told rerere to use was a
mismerge, there is no easy way to clear it. A new subcommand "forget" can
be used to tell git to forget a recorded resolution, so that you can redo
the merge from scratch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, failures during execvp could be detected only by
finish_command. However, in some situations it is beneficial for the
parent process to know earlier that the child process will not run.
The idea to use a pipe to signal failures to the parent process and
the test case were lifted from patches by Ilari Liusvaara.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
Commit 842abf0 (Teach resolve_gitlink_ref() about the .git file, 2008-02-20)
taught resolve_gitlink_ref() to call read_gitfile_gently() to resolve .git
files. In this commit teach read_gitfile_gently() to interpret a relative
path in a .git file with respect to the file location.
This change allows update-index to recognize a submodule that uses a relative
path in its .git file. It previously failed because the relative path was
wrongly interpreted with respect to the superproject directory.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that update-index recognizes a submodule that uses a .git file.
Currently it works when the .git file specifies an absolute path, but
not when it specifies a relative path.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some previous patches added some tables to the "git reset"
documentation. These tables describe the behavior of "git reset"
depending on the option it is passed and the state of the files
in the working tree, the index, HEAD and the target commit.
This patch adds some tests to make sure that the tables describe
the behavior of "git reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the status of a ref is REF_STATUS_NONE, the remote helper will not
be told to push the ref (via a 'push' command).
However, the remote helper may still act on these refs.
If the helper does act on the ref, and prints a status for it, ignore
the report (ie. don't overwrite the status of the ref with it, nor the
message in the remote_status member) if the reported status is 'no
match'.
This allows the user to be alerted to more "interesting" ref statuses,
like REF_STATUS_NONFASTFORWARD.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use push_had_errors() to check the refs for errors and modify the
return value.
Mark the non-fast-forward push tests to succeed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic that detects up-to-date and non-fast-forward refs to a
new function in remote.[ch], set_ref_status_for_push().
Make transport_push() invoke set_ref_status_for_push() before invoking
the push_refs() implementation. (As a side-effect, the push_refs()
implementation in transport-helper.c now knows of non-fast-forward
pushes.)
Removed logic for detecting up-to-date refs from the push_refs()
implementation in transport-helper.c, as transport_push() has already
done so for it.
Make cmd_send_pack() invoke set_ref_status_for_push() before invoking
send_pack(), as transport_push() can't do it for send_pack() here.
Mark the test on the return status of non-fast-forward push to fail.
Git now exits with success, as transport.c::transport_push() does not
check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it
indicate rejected pushes with its return value.
Mark the test for ref status to succeed. As mentioned earlier, refs
might be marked as non-fast-forwards, triggering the push status
printing mechanism in transport.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some refs can only be matched to a remote ref with an explicit refspec.
When such a ref is a non-fast-forward of its remote ref, test that
pushing them (with the explicit refspec specified) fails with a non-
fast-foward-type error (viz. printing of ref status and help message).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool requires difftool.<tool>.cmd configuration even when
tools use the standard "$diffcmd $from $to" form. This teaches
git-difftool to run these tools in lieu of configuration by
allowing the command to be specified on the command line.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133377
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An undocumented mis-feature in git-difftool is that it allows you
to specify a default difftool by setting GIT_MERGE_TOOL.
This behavior was never documented and was included as an
oversight back when git-difftool was maintained outside of git.
git-mergetool never honored GIT_MERGE_TOOL so neither should
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given pathspecs that share a common prefix, ls-files optimized its call
into recursive directory reader by starting at the common prefix
directory.
If you have a directory "t" with an untracked file "t/junk" in it, but the
top-level .gitignore file told us to ignore "t/", this resulted in:
$ git ls-files -o --exclude-standard
$ git ls-files -o --exclude-standard t/
t/junk
$ git ls-files -o --exclude-standard t/junk
t/junk
$ cd t && git ls-files -o --exclude-standard
junk
We could argue that you are overriding the ignore file by giving a
patchspec that matches or being in that directory, but it is somewhat
unexpected. Worse yet, these behave differently:
$ git ls-files -o --exclude-standard t/ .
$ git ls-files -o --exclude-standard t/
t/junk
This patch changes the optimization so that it notices when the common
prefix directory that it starts reading from is an ignored one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have "t" directory that is marked as ignored in the top-level
.gitignore file (or $GIT_DIR/info/exclude), running
$ git ls-files -o --exclude-standard
from the top-level correctly excludes files in "t" directory, but
any of the following:
$ git ls-files -o --exclude-standard t/
$ cd t && git ls-files -o --exclude-standard
would show untracked files in that directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/maint-octopus:
octopus: remove dead code
octopus: reenable fast-forward merges
octopus: make merge process simpler to follow
Conflicts:
git-merge-octopus.sh
* mo/bin-wrappers:
INSTALL: document a simpler way to run uninstalled builds
run test suite without dashed git-commands in PATH
build dashless "bin-wrappers" directory similar to installed bindir
This makes the traversal of index be in sync with the tree traversal.
When unpack_callback() is fed a set of tree entries from trees, it
inspects the name of the entry and checks if the an index entry with
the same name could be hiding behind the current index entry, and
(1) if the name appears in the index as a leaf node, it is also
fed to the n_way_merge() callback function;
(2) if the name is a directory in the index, i.e. there are entries in
that are underneath it, then nothing is fed to the n_way_merge()
callback function;
(3) otherwise, if the name comes before the first eligible entry in the
index, the index entry is first unpacked alone.
When traverse_trees_recursive() descends into a subdirectory, the
cache_bottom pointer is moved to walk index entries within that directory.
All of these are omitted for diff-index, which does not even want to be
fed an index entry and a tree entry with D/F conflicts.
This fixes 3-way read-tree and exposes a bug in other parts of the system
in t6035, test #5. The test prepares these three trees:
O = HEAD^
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob e69de29bb2 a/x
A = HEAD
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x
B = master
120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/x
With a clean index that matches HEAD, running
git read-tree -m -u --aggressive $O $A $B
now yields
120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b
100644 e69de29bb2 0 a/b-2/c/d
100644 e69de29bb2 1 a/b/c/d
100644 e69de29bb2 2 a/b/c/d
100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x
which is correct. "master" created "a/b" symlink that did not exist,
and removed "a/b/c/d" while HEAD did not do touch either path.
Before this series, read-tree did not notice the situation and resolved
addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had
another path "a/b/c/e" added, this merge should conflict but instead it
silently resolved "a/b" and then immediately overwrote it to add
"a/b/c/e", which was quite bogus.
Tests in t1012 start to work with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rewriting commits on a topic branch, sometimes it is easier to
compare the version of commits before and after the rewrite if they are
based on the same commit that forked from the upstream. An earlier commit
by Junio (fixed up by the previous commit) gives "--onto A...B" syntax to
rebase command, and rebases on top of the merge base between A and B;
teach the same to the interactive version, too.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch didn't parse "rebase --onto A...B" correctly when A
isn't an empty string. It also tried to be careful to notice a case in
which there are more than one merge bases, but forgot to give --all option
to merge-base, making the test pointless.
Fix these problems and add a test script to verify. Improvements to the
script to parse A...B syntax was taken from review comments by Johannes
Schindelin.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add another test to set prerequisite EXTGREP if the current build supports
external grep. This can be used to skip external grep only tests on builds
that do not support this optimization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should tell ll_merge() that the 3-way merge between stages #2 and #3 is
an outermost merge, not a virtual-ancestor creation.
Back when this code was originally written, users couldn't write custom
merge drivers easily, so the bug didn't matter, but these days it does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reuses many of the tests from the old t5560 but runs those tests
without curl or a webserver. This will hopefully increase the testing
coverage for http-backend because it does not require users to set
GIT_TEST_HTTPD.
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should introduce no functional change in the tests or the amount
of test coverage.
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 34b6cb8bb ("http-backend: Protect GIT_PROJECT_ROOT from /../
requests") added the path_info helper function to test t5560 but did
not use it. We should use it as it provides another level of error
checking.
The /etc/.../passwd case is one that is not special (and the test
fails for reasons other than being aliased), so we remove that test
case.
Also rename the function from 'path_info' to 'expect_aliased'.
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to how git-daemon checks whether a repository is OK to be
exported, smart-http should also check. This check can be satisfied
in two different ways: the environmental variable GIT_HTTP_EXPORT_ALL
may be set to export all repositories, or the individual repository
may have the file git-daemon-export-ok.
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On CentOS 5, httpd is located at /usr/sbin/httpd, and the modules are
located at /usr/lib64/httpd/modules. To enable easy testing of httpd,
we would like those locations to be detected automatically.
uname might not be the best way to determine the default location for
httpd since different Linux distributions apparently put httpd in
different places, so we test a couple different locations for httpd,
and use the first one that we come across. We do the same for the
modules directory.
cc: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recall that MSYS bash converts POSIX style absolute paths to Windows style
absolute paths. Unfortunately, it converts a program argument that begins
with a double-quote and otherwise looks like an absolute POSIX path, but
in doing so, it strips everything past the second double-quote[*]. This
case is triggered in the two test scripts. The work-around is to place the
Windows style path returned by $(pwd) between the quotes to avoid the path
conversion.
[*] It is already bogus that a conversion is even considered when a program
argument begins with a double-quote because it cannot be an absolute POSIX
path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently textconv helpers are run directly. Running through
the shell is useful because the user can provide a program
with command line arguments, like "antiword -f".
It also makes textconv more consistent with other parts of
git, most of which run their helpers using the shell.
The downside is that textconv helpers with shell
metacharacters (like space) in the filename will be broken.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we need the shbang line to correctly invoke shell scripts via
a POSIX shell, except when the script is invoked via 'sh -c' because sh (a
bash) does "the right thing". But the clean and smudge filters will not
always be invoked via 'sh -c'; to futureproof, we should mark the the one
in t0021-conversion with #!$SHELL_PATH.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ancestor used to have a blob "P", your tree removed it, and the
tree you are merging with also removed it, the agressive three-way cleanly
merges to remove that blob. If the other tree added a new blob "P/Q"
while removing "P", it should also merge cleanly to remove "P" and create
"P/Q" (since neither the ancestor nor your tree could have had it, so it
is a typical "created in one").
The "aggressive" rule is not new anymore. Reword the stale comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
traverse_trees() is supposed to call its callback with all the matching
entries from the given trees. The current algorithm keeps a pointer to
each of the tree being traversed, and feeds the entry with the earliest
name to the callback.
This breaks down if the trees being traversed looks like this:
A B
t-1 t
t-2 u
t/a v
When we are currently looking at an entry "t-1" in tree A, and tree B has
returned "t", feeding "t" from the B and not feeding anything from A, only
because "t-1" sorts later than "t", will miss an entry for a subtree "t"
behind the current entry in tree A.
This introduces extended_entry_extract() helper function that gives what
name is expected from the tree, and implements a mechanism to look-ahead
in the tree object using it, to make sure such a case is handled sanely.
Traversal in tree A in the above example will first return "t" to match
that of B, and then the next request for an entry to A then returns "t-1".
This roughly corresponds to what Linus's "prepare for one-entry lookahead"
wanted to do, but because this does implement look ahead, t6035 and one more
test in t1012 reveal that the approach would not work without adjusting the
side that walks the index in unpack_trees() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes "reset_index_file()" call "unpack_trees()" directly
instead of forking and execing "git read-tree". So the code is more
efficient.
And it's also easier to see which unpack_tree() options will be used,
as we don't need to follow "git read-tree"'s command line parsing
which is quite complex.
As Daniel Barkalow found, there is a difference between this new
version and the old one. The old version gives an error for
"git reset --merge" with unmerged entries, and the new version does
not when we reset the entries to some states that differ from HEAD.
Instead, it resets the index entry and succeeds, while leaving the
conflict markers in the corresponding file in the work tree (which
will be corrected by the next patch).
The code comes from the sequencer GSoC project:
git://repo.or.cz/git/sbeyer.git
(at commit 5a78908b70ceb5a4ea9fd4b82f07ceba1f019079)
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users might prefer to have git-difftool use a different
tool when run from a Git GUI.
This teaches git-difftool to honor 'diff.guitool' when
the '--gui' option is specified. This allows users to
configure their preferred command-line diff tool in
'diff.tool' and a GUI diff tool in 'diff.guitool'.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133386
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a difftool test has an error then running the git test suite
may end up invoking a GUI diff tool. We now guard against this
by setting a difftool.bogus-tool.cmd variable.
The tests already used --tool=bogus-tool in various places so
this is simply ensuring that nothing ever falls back and
finds a real diff tool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
branch: die explicitly why when calling "git branch [-a|-r] branchname".
fast-import: Document author/committer/tagger name is optional
SubmittingPatches: hints to know the status of a submitted patch.
The -a and -r options used to be silently ignored in such a command.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from commit 8db35596, "git remote update" (with no
group name given) will fail with the following message if
remotes.default has been set in the config file:
fatal: 'default' does not appear to be a git repository
fatal: The remote end hung up unexpectedly
The problem is that the --multiple option is not passed to
"git fetch" if no remote or group name is given on the command
line. Fix the problem by always passing the --multiple
option to "git fetch" (which actually simplifies the code).
Reported-by: YONETANI Tomokazu
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
395de250 (Expand ~ and ~user in core.excludesfile, commit.template)
introduced a C function git_config_pathname, doing ~/ and ~user/
expansion. This patch makes the feature available to scripts with 'git
config --get --path'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs without a source side have been reported as confusing by many.
As an alternative, this adds support for commands like:
git push origin --delete somebranch
git push origin --delete tag sometag
Specifically, --delete will prepend a colon to all colon-less refspecs
given on the command line, and will refuse to accept refspecs with
colons to prevent undue confusion.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Documentation: always respect core.worktree if set
When a branch is marked to merge with another ref (e.g. local 'next' that
merges from and pushes back to origin's 'next', with 'branch.next.merge'
set to 'refs/heads/next'), it makes little sense to base the "branch -d"
safety, whose purpose is not to lose commits that are not merged to other
branches, on the current branch. It is much more sensible to check if it
is merged with the other branch it merges with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
diff.c
Commit 9e8eceab ("Add 'merge' mode to 'git reset'", 2008-12-01),
added the --merge option to git reset, but there were no test cases
for it.
This was not a big problem because "git reset" was just forking and
execing "git read-tree", but this will change in a following patch.
So let's add a few test cases to make sure that there will be no
regression.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 952dfc6 tried to tighten the safety valves for doing
a "reset --hard" in a bare repository or outside the work
tree, but accidentally broke the case for GIT_WORK_TREE.
This patch unbreaks it.
Most git commands which need a work tree simply use
NEED_WORK_TREE in git.c to die before they get to their
cmd_* function. Reset, however, only needs a work tree in
some cases, and so must handle the work tree itself. The
error that 952dfc6 made was to simply forbid certain
operations if the work tree was not set up; instead, we need
to do the same thing that NEED_WORK_TREE does, which is to
call setup_work_tree(). We no longer have to worry about dying
in the non-worktree case, as setup_work_tree handles that
for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the argument convention of git-pack-objects, such that a
separate option (--preogress) is used to force progress reporting
instead of -v/--verbose.
-v/--verbose now does not force progress reporting. Make git-clone.txt
say so.
This should cover all the bases in 21188b1 (Implement git clone -v),
which implemented the option to force progress reporting.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
* maint:
Makefile: FreeBSD (both 7 and 8) needs OLD_ICONV
Start 1.6.6.X maintenance track
Add git-http-backend to command-list.
t4019 "grep" portability fix
t1200: work around a bug in some implementations of "find"
Conflicts:
RelNotes
* jc/1.7.0-diff-whitespace-only-status:
diff.c: fix typoes in comments
Make test case number unique
diff: Rename QUIET internal option to QUICK
diff: change semantics of "ignore whitespace" options
Conflicts:
diff.h
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Input to "grep" is supposed to be "text", but we deliberately feed output
from "git diff --color" to sift it into two sets of lines (ones with
errors, the other without). Some implementations of "grep" only report
matches with the exit status, without showing the matched lines in their
output (e.g. OpenBSD 4.6, which says "Binary file .. matches").
Fortunately, "grep -a" is often a way to force the command to treat its
input as text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"find path ..." command should exit with zero status only when all path
operands were traversed successfully. When a non-existent path is given,
however, some implementations of "find" (e.g. OpenBSD 4.6) exit with zero
status and break the last test in t1200.
Rewrite the test to check that there is no regular files in the objects
fan-out directories to work around this bug; it is closer to what we are
testing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update-index plumbing command had a hacky --unresolve implementation
that was written back in the days when merge was the only way for users to
end up with higher stages in the index, and assumed that stage #2 must
have come from HEAD, stage #3 from MERGE_HEAD and didn't bother to compute
the stage #1 information.
There were several issues with this approach:
- These days, merge is not the only command, and conflicts coming from
commands like cherry-pick, "am -3", etc. cannot be recreated by looking
at MERGE_HEAD;
- For a conflict that came from a merge that had renames, picking up the
same path from MERGE_HEAD and HEAD wouldn't help recreating it, either;
- It may have been Ok not to recreate stage #1 back when it was written,
because "diff --ours/--theirs" were the only availble ways to review
conflicts and they don't need stage #1 information. "diff --cc" that
was invented much later is a lot more useful way but it needs stage #1.
We can use resolve-undo information recorded in the index extension to
solve all of these issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once you resolved conflicts by "git add path", you cannot recreate the
conflicted state with "git checkout -m path", because you lost information
from higher stages in the index when you resolved them.
Since we record the necessary information in the resolve-undo index
extension these days, we can reproduce the unmerged state in the index and
check it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the Porcelain level, operations such as merge that populate an
initially cleanly merged index with conflicted entries clear the
resolve-undo information upfront. Give scripted Porcelains a way
to do the same, by implementing "update-index --clear-resolve-info".
With this, a scripted Porcelain may "update-index --clear-resolve-info"
first and repeatedly run "update-index --cacheinfo" to stuff unmerged
entries to the index, to be resolved by the user with "git add" and
stuff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that resolving a failed merge with git add records
the conflicted state, committing the result keeps that state,
and checking out another commit clears the state.
"git ls-files" learns a new option --resolve-undo to show the
recorded information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn gc will compress the unhandled.log files that git svn mkdirs reads,
causing git svn mkdirs to skip directory creation.
[ew: trivial whitespace cleanups]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Robert Zeh <robert.a.zeh@gmail.com>
The human-readable author and committer name can be missing from
commits imported from foreign SCM interfaces. Make sure we parse
the "author" and "committer" line a bit more leniently and avoid
segfaulting by assuming the name always exists.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
As shown, git-svn has some problems; not all svn merges are correctly
detected, and cherry picks may incorrectly be detected as real merges.
These test cases will be marked as _success once the relevant fixes are in.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b4d1690 (Teach Git to respect skip-worktree bit (reading part))
fails to make "git commit -- a b c" respect skip-worktree
(i.e. not committing paths that are skip-worktree). This is because
when the index is reset back to HEAD, all skip-worktree information is
gone.
This patch saves skip-worktree information in the string list of
committed paths, then reuse it later on to skip skip-worktree paths.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-forward logic is never being triggered because $common and
$MRC are never equivalent. $common is initialized to a commit id by
merge-base and MRC is initialized to HEAD. Fix this by initializing
$MRC to the commit id for HEAD so that its possible for $MRC and
$common to be equal.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its not very easy to understand what heads are being merged given
the current output of an octopus merge. Fix this by replacing the
sha1 with the (usually) better description in GITHEAD_<SHA1>.
Suggested-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggesting "'reset HEAD <path>' to unstage" is dead wrong if we are about
to record a merge commit. For either an unmerged path (i.e. with
unresolved conflicts), or an updated path, it would result in discarding
what the other branch did.
Note that we do not do anything special in a case where we are amending a
merge. The user is making an evil merge starting from an already
committed merge, and running "reset HEAD <path>" is the right way to get
rid of the local edit that has been added to the index.
Once "reset --unresolve <path>" becomes available, we might want to
suggest it for a merged path that has unresolve information, but until
then, just remove the incorrect advice.
We might also want to suggest "checkout --conflict <path>" to revert the
file in the work tree to the state of failed automerge for an unmerged
path, but we never did that, and this commit does not change that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the desired resolution is to remove the path, "git rm <path>" is the
command the user needs to use. Just like in "Changed but not updated"
section, suggest to use "git add/rm" as appropriate.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a useful script function to decode colored output to
text form from t4034 and use it in this test as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This patch adds testcases verifying correct behaviour in several scenarios
regarding fast-import of notes:
- using a mixture of 'N' and 'M' commands
- updating existing notes
- concatenation of notes
- 'deleteall' also removes notes
- fanout schemes is added/removed when needed
- git-fast-import's branch unload/reload preserves notes
- non-notes are not clobbered in the presence of notes
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches 'git fast-import' to automatically organize note objects
in a fast-import stream into an appropriate fanout structure. The notes API
in notes.h is NOT used to accomplish this, because trying to keep the
fast-import and notes data structures in sync would yield a significantly
larger patch with higher complexity.
Note objects are added with the 'N' command, and accounted for with a
per-branch counter, which is used to trigger fanout restructuring when
needed. Note that when restructuring the branch tree, _any_ entry whose
path consists of 40 hex chars (not including directory separators) will
be recognized as a note object. It is therefore not advisable to
manipulate note entries with M/D/R/C commands.
Since note objects are stored in the same tree structure as other objects,
the unloading and reloading of a fast-import branches handle note objects
transparently.
This patch has been improved by the following contributions:
- Shawn O. Pearce: Several style- and logic-related improvements
Cc: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, test-lib checks that the git_remote_helpers
directory has been built. However, if we are building
without python, we will not have done anything at all in
that directory, and test-lib's sanity check will fail.
We bump the inclusion of GIT-BUILD-OPTIONS further up in
test-lib; it contains configuration, and as such should be
read before we do any checks (and in this particular case,
we need its value to do our check properly).
Signed-off-by: Jeff King <peff@peff.net>
Looks-fine-to-me-by: Brandon Casey <brandon.casey.ctr@nrlssc.navy.mil>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also adjust "expected" text to reflect the file contents generated by
test_commit, which are slightly different than those generated by the
old code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master: (334 commits)
bash: update 'git commit' completion
Git 1.6.5.5
Fix diff -B/--dirstat miscounting of newly added contents
reset: improve worktree safety valves
Documentation: Avoid use of xmlto --stringparam
archive: clarify description of path parameter
rerere: don't segfault on failure to open rr-cache
Prepare for 1.6.5.5
gitweb: Describe (possible) gitweb.js minification in gitweb/README
Documentation: xmlto 0.0.18 does not know --stringparam
Fix crasher on encountering SHA1-like non-note in notes tree
t9001: use older Getopt::Long boolean prefix '--no' rather than '--no-'
t4201: use ISO8859-1 rather than ISO-8859-1
Git 1.6.5.4
Unconditionally set man.base.url.for.relative.links
Documentation/Makefile: allow man.base.url.for.relative.link to be set from Make
Git 1.6.6-rc1
git-pull.sh: Fix call to git-merge for new command format
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
...
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After specifying 'feature relative-marks' the paths specified with
'feature import-marks' and 'feature export-marks' are relative to an
internal directory in the current repository.
In git-fast-import this means that the paths are relative to the
'.git/info/fast-import' directory. However, other importers may use a
different location.
Add 'feature non-relative-marks' to disable this behavior, this way
it is possible to, for example, specify the import-marks location as
relative, and the export-marks location as non-relative.
Also add tests to verify this behavior.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --import-marks= option may be specified multiple times on the
commandline and should result in all marks being read in. Only one
import-marks feature may be specified in the stream, which is
overriden by any --import-marks= commandline options.
If one wishes to specify import-marks files in addition to the one
specified in the stream, it is easy to repeat the stream option as a
--import-marks= commandline option.
Also verify this behavior with tests.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the quiet option and verify that the commandline options
override it.
Also make sure that an unknown option command is rejected and that
non-git options are ignored.
Lastly, show that unknown options are rejected when parsed on the
commandline.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the fronted to require a specific feature to be supported
by the backend, or abort.
Also add support for four initial feature, date-format=, force=,
import-marks=, export-marks=.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a command line option to override rerere.autoupdate configuration
variable to make it more useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is like --author: allow a user to specify a given date without
using the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only put bin-wrappers in the PATH (not GIT_EXEC_PATH), to emulate the
default installed user environment, and ensure all the programs run
correctly in such an environment. This is now the default, although
it can be overridden with a --with-dashes test option when running
tests.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When loading a notes tree, the code primarily looks for SHA1-like paths
whose total length (discounting directory separators) are 40 chars
(interpreted as valid note entries) or less (interpreted as subtree
entries that may in turn contain note entries when unpacked).
However, there is an additional condition that must hold for valid
subtree entries: They must be _tree_ objects (duh).
This patch adds an appropriate test for this condition, thereby fixing
the crash that occured when passing a non-tree object to the tree-walk
API.
The patch also adds another selftest verifying correct behaviour of
non-notes in note trees.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
Do not misidentify "git merge foo HEAD" as an old-style invocation
Conflicts:
RelNotes
Even if the user explicitly gave her own message to "git merge", the
command still added its standard merge message. It resulted in a
useless repetition like this:
% git merge -m "Merge early part of side branch" `git rev-parse side~2`
% git show -s
commit 37217141e7519629353738d5e4e677a15096206f
Merge: e68e646 a1d2374
Author: しらいし ななこ <nanako3@lavabit.com>
Date: Wed Dec 2 14:33:20 2009 +0900
Merge early part of side branch
Merge commit 'a1d2374f8f52f4e8a53171601a920b538a6cec23'
The gave her own message because she didn't want git to add the
standard message (if she wanted to, she wouldn't have given one,
or she would have prepared it using git-fmt-merge-msg command).
Noticed by Nanako Shiraishi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added without documentation in 2009-03-16 (6720721).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow the test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new short status has been completely untested so far. Introduce
tests by duplicating all tests which are present for the long format.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should avoid duplicate test numbers, since things like
GIT_SKIP_TESTS consider something like t1009.5 to be
unambiguous.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't take the author name information without re-encoding from the raw
commit object buffer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
