* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
These tests pass with the current code, but let's make sure
we don't accidentally break the behavior in the future.
Note that our tests expect failure when we try to set the
upstream to or from a missing branch. Technically we are
just munging config here, so we do not need the refs to
exist. But seeing that they do exist is a good check that
the user has not made a typo.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that "git config --unset" does not remove an empty section
head after removing the last variable in a section, and adding a
new variable does not try to reuse a leftover empty section head.
* jk/config-with-empty-section:
t1300: document some aesthetic failures of the config editor
This is the logical equivalent for "git status" of 3ee4452 (bash: teach
__git_ps1 about REVERT_HEAD).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing filter-branch does is to create a temporary
directory, either ".git-rewrite" in the current directory
(which may be the working tree or the repository if bare),
or in a directory specified by "-d". We then chdir to
$tempdir/t as our temporary working directory in which to run
tree filters.
After finishing the filter, we then attempt to go back to
the original directory with "cd ../..". This works in the
.git-rewrite case, but if "-d" is used, we end up in a
random directory. The only thing we do after this chdir is
to run git-read-tree, but that means that:
1. The working directory is not updated to reflect the
filtered history.
2. We dump random files into "$tempdir/.." (e.g., if you
use "-d /tmp/foo", we dump junk into /tmp).
Fix it by recording the full path to the original directory
and returning there explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git rerere forget .' after a merge that involved binary files
runs into an infinite loop if the binary file contains a zero byte.
Replace a strchrnul by memchr because the former does not make progress
as soon as the NUL is encountered.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable overrides `remote.pushdefault` and
`branch.<name>.remote` for pushes. When you pull from one
place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable defines the default remote to push to,
and overrides `branch.<name>.remote` for all branches. It is useful
in the typical triangular-workflow setup, where the remote you're
fetching from is different from the remote you're pushing to.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the tests in t5516 look like:
mk_empty &&
git push testrepo ... &&
check_push_result $commit heads/master
It's reasonably easy to see what is being tested, with the
exception that "testrepo" is a magic global name (it is
implicitly used in the helpers, but we have to name it
explicitly when calling git directly). Let's make it
explicit when call the helpers, too. This is slightly more
typing, but makes the test snippets read more naturally.
It also makes it easy for future tests to use an alternate
or multiple repositories, without a proliferation of helper
functions.
[rr: fixed sloppy quoting]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file was originally created in bcdb34f (Test wildcard push/fetch,
2007-06-08), and only contained tests that exercised wildcard
functionality at the time. In subsequent commits, many other tests
unrelated to wildcards were added but the test description was never
updated. Fix this.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of "git submodule deinit sub" of a populated submodule prints
rm 'sub'
as the first line unless used with the -f option.
The "rm 'sub'" line is exactly the same output the user gets when using
"git rm sub" (because that command is used with the --dry-run option under
the hood to determine if the submodule is clean), which can easily lead to
the false impression that the submodule would be permanently removed. Also
users might be confused that the "rm 'submodule'" line won't show up when
the -f option is used, as the test is skipped in this case.
Silence the "rm 'submodule'" output by using the --quiet option for "git
rm" and always print
Cleared directory 'submodule'
instead as the first output line. This line is printed as long as the
directory exists, no matter if empty or not.
Also extend the tests in t7400 to make sure the "Cleared directory" line
is printed correctly.
Reported-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests were already well protected from previous ones by running
"git config --unset" on variables early they do not want to see, but
it is easier to make sure they start from a clean state by using
more modern test_config/test_unconfig helper functions.
It turns out that the last test depended on the merge.summary
configuration previous one leaves behind. Set it explicitly in it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
Update t5516 with style fixes.
* jn/push-tests:
push test: rely on &&-chaining instead of 'if bad; then echo Oops; fi'
push test: simplify check of push result
push test: use test_config when appropriate
Add a bit more information to "git status" during a rebase/bisect
session.
* nd/branch-show-rebase-bisect-state:
status, branch: fix the misleading "bisecting" message
branch: show more information when HEAD is detached
status: show more info than "currently not on any branch"
wt-status: move wt_status_get_state() out to wt_status_print()
wt-status: split wt_status_state parsing function out
wt-status: move strbuf into read_and_strip_branch()
The code to keep track of what directory names are known to Git on
platforms with case insensitive filesystems can get confused upon
a hash collision between these pathnames and looped forever.
* kb/name-hash:
name-hash.c: fix endless loop with core.ignorecase=true
Clean up pkt-line API, implementation and its callers to make them
more robust.
* jk/pkt-line-cleanup:
do not use GIT_TRACE_PACKET=3 in tests
remote-curl: always parse incoming refs
remote-curl: move ref-parsing code up in file
remote-curl: pass buffer straight to get_remote_heads
teach get_remote_heads to read from a memory buffer
pkt-line: share buffer/descriptor reading implementation
pkt-line: provide a LARGE_PACKET_MAX static buffer
pkt-line: move LARGE_PACKET_MAX definition from sideband
pkt-line: teach packet_read_line to chomp newlines
pkt-line: provide a generic reading function with options
pkt-line: drop safe_write function
pkt-line: move a misplaced comment
write_or_die: raise SIGPIPE when we get EPIPE
upload-archive: use argv_array to store client arguments
upload-archive: do not copy repo name
send-pack: prefer prefixcmp over memcmp in receive_status
fetch-pack: fix out-of-bounds buffer offset in get_ack
upload-pack: remove packet debugging harness
upload-pack: do not add duplicate objects to shallow list
upload-pack: use get_sha1_hex to parse "shallow" lines
Consolidate codepaths that inspect log-message-to-be and decide to
add a new Signed-off-by line in various commands.
* bc/append-signed-off-by:
git-commit: populate the edit buffer with 2 blank lines before s-o-b
Unify appending signoff in format-patch, commit and sequencer
format-patch: update append_signoff prototype
t4014: more tests about appending s-o-b lines
sequencer.c: teach append_signoff to avoid adding a duplicate newline
sequencer.c: teach append_signoff how to detect duplicate s-o-b
sequencer.c: always separate "(cherry picked from" from commit body
sequencer.c: require a conforming footer to be preceded by a blank line
sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer
t/t3511: add some tests of 'cherry-pick -s' functionality
t/test-lib-functions.sh: allow to specify the tag name to test_commit
commit, cherry-pick -s: remove broken support for multiline rfc2822 fields
sequencer.c: rework search for start of footer to improve clarity
We tell valgrind to return 126 if it notices that something is wrong,
but we did not actually handle this in test_must_fail, leading to
false negatives. Catch and report it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --valgrind=memcheck-fast, the tests run under memcheck but
without the autodetected --track-origins. If you just run valgrind to
see *if* there is any memory issue with your program, the extra
information is not needed, and it comes at a roughly 30% hit in
runtime.
While it is possible to achieve the same through GIT_VALGRIND_OPTIONS,
this should be more discoverable and hopefully encourage more users to
run their tests with valgrind.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests under helgrind and DRD recently proved useful in
tracking down thread interaction issues. This can unfortunately not
be done through GIT_VALGRIND_OPTIONS because any tool other than
memcheck would complain about unknown options.
Let --valgrind take an optional parameter that describes the valgrind
tool to invoke. The default mode is to run memcheck as before.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed in 3da9365 (Tests: let --valgrind imply --verbose and
--tee, 2009-02-04).
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified, abort the merge in case a good
GPG signature from an untrusted key is encountered.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified on the command-line of git-merge
or git-pull, check whether the commits being merged have good gpg
signatures and abort the merge in case they do not. This allows e.g.
auto-deployment from untrusted repo hosts.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we manage to clone a remote repository but run into an
error in the checkout, it is probably sane to leave the repo
directory in place. That lets the user examine the situation
without spending time to re-clone from the remote (which may
be a lengthy process).
Rather than try to convert each die() from the checkout code
path into an error(), we simply set a flag that tells the
"remove_junk" atexit function to print a helpful message and
leave the repo in place.
Note that the test added in this patch actually passes
without the code change. The reason is that the cleanup code
is buggy; we chdir into the working tree for the checkout,
but still may use relative paths to remove the directories
(which means if you cloned into "foo", we would accidentally
remove "foo" from the working tree!). There's no point in
fixing it now, since this patch means we will never try to
remove anything after the chdir, anyway.
[jc: replaced the message with a more succinct version from
Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the difftool --dir-diff tests may or may not use symlinks
depending on the operating system on which they are run. In one case
this has caused a test failure to be noticed only on Windows when the
test also fails on Linux when difftool is invoked with --no-symlinks.
Rewrite these tests so that they do not depend on the environment but
run explicitly with both --symlinks and --no-symlinks, protecting the
--symlinks version with a SYMLINKS prerequisite.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git difftool --dir-diff' is using --no-symlinks (either explicitly
or implicitly because it's running on Windows), any working tree files
that have been copied to the temporary directory are copied back after
the difftool completes.
Because an earlier test uses "git add .", the "output" file used by
tests is tracked by Git and the following sequence occurs during some
tests:
1) the shell opens "output" to redirect the difftool output
2) difftool copies the empty "output" to the temporary directory
3) difftool runs "ls" which writes to "output"
4) difftool copies the empty "output" file back over the output of the
command
5) the output file doesn't contain the expected output, causing the
test to fail
Instead of adding all changes, explicitly add only the files that the
test is using, allowing later tests to write their result files into the
working tree.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the stdin_contains and stdin_doesnt_contain helper functions
which add nothing but hide the output of grep, hurting debugging.
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running the user's diff tool, git-difftool will copy any files
that differ between the working tree and the temporary tree. This is
useful when the user edits the file in their diff tool but is wrong if
they edit the working tree file while examining the diff.
Instead of copying unconditionally when the files differ, create and
index from the working tree files and only copy the temporary file back
if it was modified and the working tree file was not. If both files
have been modified, print a warning and exit with an error.
Note that we cannot use an existing index in git-difftool since those
contain the modified files that need to be checked out but here we are
looking at those files which are copied from the working tree and not
checked out. These are precisely the files which are not in the
existing indices.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config-editing code used by "git config var value" is
built around the regular config callback parser, whose only
triggerable item is an actual key. As a result, it does not
know anything about section headers, which can result in
unnecessarily ugly output:
1. When we delete the last key in a section, we should be
able to delete the section header.
2. When we add a key into a section, we should be able to
reuse the same section header, even if that section did
not have any keys in it already.
Unfortunately, fixing these is not trivial with the current
code. It would involve the config parser recording and
passing back information on each item it finds, including
headers, keys, and even comments (or even better, generating
an actual in-memory parse-tree).
Since these behaviors do not cause any functional problems
(i.e., the resulting config parses as expected, it is just
uglier than one would like), fixing them can wait until
somebody feels like substantially refactoring the parsing
code. In the meantime, let's document them as known issues
with some tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will group the tests more logically when we introduce a helper to
run most --dir-diff tests with both --symlinks and --no-symlinks.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to v1.8.1.1, with:
git init
echo content >foo &&
mkdir subdir &&
echo content >subdir/bar &&
echo "subdir export-ignore" >.gitattributes
git add . &&
git commit -m one &&
git archive HEAD | tar tf -
the resulting archive would contain only "foo" and ".gitattributes",
not subdir. This was broken with a recent change that intended to
allow "subdir/ export-ignore" to also exclude the directory, but
instead ended up _requiring_ the trailing slash by mistake.
A pattern "subdir" should match any path "subdir", whether it is a
directory or a non-directory. A pattern "subdir/" insists that a
path "subdir" must be a directory for it to match.
This patch adds test not just for this simple case, but also for
deeper cross-directory cases, as well as cases with wildcards.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bulk-update of the test suite.
* yd/use-test-config-unconfig:
t5520: use test_config to set/unset git config variables (leftover bits)
t7600: use test_config to set/unset git config variables
t7502: remove clear_config
t7502: use test_config to set/unset git config variables
t9500: use test_config to set/unset git config variables
t7508: use test_config to set/unset git config variables
t7500: use test_config to set/unset git config variables
t5541: use test_config to set/unset git config variables
t5520: use test_config to set/unset git config variables
t4202: use test_config/test_unconfig to set/unset git config variables
t4034: use test_config/test_unconfig to set/unset git config variables
t4304: use test_config to set/unset git config variables
t3400: use test_config to set/unset git config variables
Allow the revision "slop" code to look deeper while commits with
exactly the same timestamps come next to each other (which can
often happen after a large "am" and "rebase" session).
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
The --simplify-merges logic did not cull irrelevant parents from a
merge that is otherwise not interesting with respect to the paths
we are following.
This touches a fairly core part of the revision traversal
infrastructure; even though I think this change is correct, please
report immediately if you find any unintended side effect.
* jc/remove-treesame-parent-in-simplify-merges:
simplify-merges: drop merge from irrelevant side branch
Codepath to stream blob object contents directly from the object
store to filesystem did not use the correct path to find conversion
filters when writing to temporary files.
* jk/checkout-attribute-lookup:
t2003: work around path mangling issue on Windows
entry: fix filter lookup
t2003: modernize style
"git difftool --dir-diff" made symlinks to working tree files when
preparing a temporary directory structure, so that accidental edits
of these files in the difftool are reflected back to the working
tree, but the logic to decide when to do so was not quite right.
* jk/difftool-dir-diff-edit-fix:
difftool --dir-diff: symlink all files matching the working tree
difftool: avoid double slashes in symlink targets
git-difftool(1): fix formatting of --symlink description
1c2eafb89b (Add url.<base>.pushInsteadOf: URL rewriting for push
only, 2009-09-07) wants to make sure that a push destination read
from URL is not rewritten by pushInsteadOf because an explicit
pushURL exists; for that, a pushInsteadOf rewrite rule for the value
of remote.r.URL is set to a non-existent is set up.
We would also want to make sure that pushInsteadOf rewrite rule is
not applied to the location read from pushURL.
This way, we will make sure that
- "testrepo/" (pushURL) gets updated;
- the push does not try to update "trash2/" (the result of applying
pushInsteadOf to pushURL);
- the push does not try to update "trash3/" (the result of applying
pushInsteadOf to URL).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration from test_config does not last beyond the end of the
current test assertion, making each test easier to think about in
isolation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we do a revision walk to make
sure that what we received is connected to our existing
history. We do not do the same check for clone, which should
be able to check that we received an intact history graph.
The upside of this patch is that it will make clone more
resilient against propagating repository corruption. The
downside is that we will now traverse "rev-list --objects
--all" down to the roots, which may take some time (it is
especially noticeable for a "--local --bare" clone).
Note that we need to adjust t5710, which tries to make such
a bogus clone. Rather than checking after the fact that our
clone is bogus, we can simplify it to just make sure "git
clone" reports failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When clone is populating the working tree, it ignores the
return status from unpack_trees; this means we may report a
successful clone, even when the checkout fails.
When checkout fails, we may want to leave the $GIT_DIR in
place, as it might be possible to recover the data through
further use of "git checkout" (e.g., if the checkout failed
due to a transient error, disk full, etc). However, we
already die on a number of other checkout-related errors, so
this patch follows that pattern.
In addition to marking a now-passing test, we need to adjust
t5710, which blindly assumed it could make bogus clones of
very deep alternates hierarchies. By using "--bare", we can
avoid it actually touching any objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try not to let corruption pass unnoticed over fetches and
clones. For the most part, this works, but there are some
broken corner cases, including:
1. We do not detect missing objects over git-aware
transports. This is a little hard to test, because the
sending side will actually complain about the missing
object.
To fool it, we corrupt a repository such that we have a
"misnamed" object: it claims to be sha1 X, but is
really Y. This lets the sender blindly transmit it, but
it is the receiver's responsibility to verify that what
it got is sane (and it does not).
2. We do not detect missing or misnamed blobs during the
checkout phase of clone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are streaming an index blob to disk, we store the
error from stream_blob_to_fd in the "result" variable, and
then immediately overwrite that with the return value of
"close". That means we catch errors on close (e.g., problems
committing the file to disk), but miss anything which
happened before then.
We can fix this by using bitwise-OR to accumulate errors in
our result variable.
While we're here, we can also simplify the error handling
with an early return, which makes it easier to see under
which circumstances we need to clean up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not have many tests for handling corrupt objects. This
new test at least checks that we detect a byte error in a
corrupt blob object while streaming it out with cat-file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "diff --cc" output to honor options to ignore various forms
of whitespace changes.
* ap/combine-diff-ignore-whitespace:
Allow combined diff to ignore white-spaces
In checkout_paths() we do this
- for all updated items, call match_pathspec
- for all items, call match_pathspec (inside unmerge_cache)
- for all items, call match_pathspec (for showing "path .. is unmerged)
- for updated items, call match_pathspec and update paths
That's a lot of duplicate match_pathspec(s) and the function is not
exactly cheap to be called so many times, especially on large indexes.
This patch makes it call match_pathspec once per updated index entry,
save the result in ce_flags and reuse the results in the following
loops.
The changes in 0a1283b (checkout $tree $path: do not clobber local
changes in $path not in $tree - 2011-09-30) limit the affected paths
to ones we read from $tree. We do not do anything to other modified
entries in this case, so the "for all items" above could be modified
to "for all updated items". But..
The command's behavior now is modified slightly: unmerged entries that
match $path, but not updated by $tree, are now NOT touched. Although
this should be considered a bug fix, not a regression. A new test is
added for this change.
And while at there, free ps_matched after use.
The following command is tested on webkit, 215k entries. The pattern
is chosen mainly to make match_pathspec sweat:
git checkout -- "*[a-zA-Z]*[a-zA-Z]*[a-zA-Z]*"
before after
real 0m3.493s 0m2.737s
user 0m2.239s 0m1.586s
sys 0m1.252s 0m1.151s
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
When export-subst is used, "zip" output recorded incorrect
size of the file.
* rs/zip-compresssed-size-with-export-subst:
archive-zip: fix compressed size for stored export-subst files
"git branch" had more cases where it did not bother to check
nonsense command line parameters.
* nd/branch-error-cases:
branch: segfault fixes and validation
This replaces the greedy implementation to coalesce lost lines by using
dynamic programming to find the Longest Common Subsequence.
The O(n²) time complexity is obviously bigger than previous
implementation but it can produce shorter diff results (and most likely
easier to read).
List of lost lines is now doubly-linked because we reverse-read it when
reading the direction matrix.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not that we do not actively encourage having annotated tags outside
refs/tags/ hierarchy, but they were not advertised correctly to the
ls-remote and fetch with recent version of Git.
* jk/fully-peeled-packed-ref:
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
Recent optimization broke shallow clones.
* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
"git tag -f <tag>" always said "Updated tag '<tag>'" even when
creating a new tag (i.e. not overwriting nor updating).
* ph/tag-force-no-warn-on-creation:
tag: --force does not have to warn when creating tags
"git p4" did not behave well when the path to the root of the P4
client was not its real path.
* pw/p4-symlinked-root:
git p4: avoid expanding client paths in chdir
git p4 test: should honor symlink in p4 client root
git p4 test: make sure P4CONFIG relative path works
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
The logic used by "git diff -M --stat" to shorten the names of
files before and after a rename did not work correctly when the
common prefix and suffix between the two filenames overlapped.
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
Teach "git pull --rebase" to pass "-v/-q" command line options to
underlying "git rebase".
* pe/pull-rebase-v-q:
pull: Apply -q and -v options to rebase mode as well
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume default configuration at entry,
and to reset the modified configuration variables at the end.
Test 'merge log message' was relying on the presence of option `--no-ff`
in the configuration. With the option, git show -s --pretty=format:%b HEAD
produces an empty line and without the option, it produces an empty file.
The test is modified to check with and without `--no-ff` option.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using test_config ensure the configuration variable are removed
at the end of the test, there's no need to remove variable
at the beginning of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message is "bisecting %s" (or "bisecting branch %s").
"%s" is the current branch when we started bisecting. Clarify that to
avoid confusion with good and bad refs passed to "bisect" command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally update-pre-post-images could assume that any whitespace
fixing will make the result only shorter by unexpanding runs of
leading SPs into HTs and removing trailing whitespaces at the end of
lines. Updating the post-image we read from the patch to match the
actual result can be performed in-place under this assumption.
These days, however, we have tab-in-indent (aka Python) rule whose
result can be longer than the original, and we do need to allocate
a larger buffer than the input and replace the result.
Fortunately the support for lengthening rewrite was already added
when we began supporting "match while ignoring whitespace
differences" mode in 86c91f9179 (git apply: option to ignore
whitespace differences, 2009-08-04). We only need to correctly
count the number of bytes necessary to hold the updated result and
tell the function to allocate a new buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
When export-subst is used, "zip" output recorded incorrect
size of the file.
* rs/zip-compresssed-size-with-export-subst:
archive-zip: fix compressed size for stored export-subst files
Fix tests that contaminated their environments and affected new
tests introduced later in the sequence by containing their effects
in their own subshells.
* rt/commit-cleanup-config:
t7502: perform commits using alternate editor in a subshell
"git branch" had more cases where it did not bother to check
nonsense command line parameters.
* nd/branch-error-cases:
branch: segfault fixes and validation
Minor maintenance updates to difftool, and updates to its tests.
* da/difftool-fixes:
t7800: "defaults" is no longer a builtin tool name
t7800: modernize tests
t7800: update copyright notice
difftool: silence uninitialized variable warning
'git commit -m "$str"' when $str was already terminated with a LF
now avoids adding an extra LF to the message.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
"git count-objects -v" did not count leftover temporary packfiles
and other kinds of garbage.
* nd/count-garbage:
count-objects: report how much disk space taken by garbage files
count-objects: report garbage files in pack directory too
sha1_file: reorder code in prepare_packed_git_one()
git-count-objects.txt: describe each line in -v output
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Some test scripts use the GIT_TRACE mechanism to dump
debugging information to descriptor 3 (and point it to a
file using the shell). On Windows, however, bash is unable
to set up descriptor 3. We do not write our trace to the
file, and worse, we may interfere with other operations
happening on descriptor 3, causing tests to fail or even
behave inconsistently.
Prior to commit 97a83fa (upload-pack: remove packet debugging
harness), these tests used GIT_DEBUG_SEND_PACK, which only
supported output to a descriptor. The tests in t5503 were
always broken on Windows, and were marked to be skipped via
the NOT_MINGW prerequisite. In t5700, the tests used to pass
prior to 97a83fa, but only because they were not careful
enough; because we only grepped the trace file, an empty
file looked successful to us. But post-97a83fa, the writing
to descriptor 3 causes "git fetch" to hang (presumably
because we are throwing random bytes into the middle of the
protocol).
Now that we are using the GIT_TRACE mechanism, we can
improve both scripts by asking git to write directly to a
file rather than a descriptor. That fixes the hang in t5700,
and should allow t5503 to successfully run on Windows.
In both cases we now also use "test -s" to double-check that
our trace file actually contains output, which should reduce
the possibility of an erroneously passing test.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style is inconsistent throughout the file. Make the following
changes:
1. Indent everything with tabs.
2. Put the opening quote (') for the test in the same line as
test_expect_success, and the closing quote on a line by itself.
3. Do not add extra space between redirection operator and filename,
i.e. "cmd >dst", not "cmd > dst".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSYS bash considers the part "/g" in the sed expression "s/./=/g" as an
absolute path after an assignment, and mangles it to a C:/something
string. Do not attract bash's attention by avoiding the equals sign.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
When it is unclear which command from a test has failed, usual
practice these days is to debug by running the test again with "sh -x"
instead of relying on debugging 'echo' statements.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test checks each ref with code like the following:
r=$(git show-ref -s --verify refs/$ref) &&
test "z$r" = "z$the_first_commit"
Afterward it counts refs:
test 1 = $(git for-each-ref refs/remotes/origin | wc -l)
Simpler to test the number and values of relevant refs in for-each-ref
output at the same time using test_cmp. This makes the test more
readable and provides more helpful "./t5516-push-push.sh -v" output
when the test fails.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration from test_config does not last beyond the end of the
current test assertion, making each test easier to think about in
isolation.
This changes the meaning of some of the tests. For example, currently
"push with insteadOf" passes even if the line setting
"url.$TRASH.pushInsteadOf" is dropped because an url.$TRASH.insteadOf
setting leaks in from a previous test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_config() is already a well-defined function in
test-lib-functions.sh. Don't duplicate it unnecessarily.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of pack-refs did not write peel lines for
refs outside of refs/tags. This meant that on reading the
pack-refs file, we might set the REF_KNOWS_PEELED flag for
such a ref, even though we do not know anything about its
peeled value.
The previous commit updated the writer to always peel, no
matter what the ref is. That means that packed-refs files
written by newer versions of git are fine to be read by both
old and new versions of git. However, we still have the
problem of reading packed-refs files written by older
versions of git, or by other implementations which have not
yet learned the same trick.
The simplest fix would be to always unset the
REF_KNOWS_PEELED flag for refs outside of refs/tags that do
not have a peel line (if it has a peel line, we know it is
valid, but we cannot assume a missing peel line means
anything). But that loses an important optimization, as
upload-pack should not need to load the object pointed to by
refs/heads/foo to determine that it is not a tag.
Instead, we add a "fully-peeled" trait to the packed-refs
file. If it is set, we know that we can trust a missing peel
line to mean that a ref cannot be peeled. Otherwise, we fall
back to assuming nothing.
[commit message and tests by Jeff King <peff@peff.net>]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syntax branchname@{upstream} should interpret its argument as a name of
a branch. Add the test to check that it doesn't try to interpret it as a
refname if the branch in question does not exist.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack an annotated tag ref, we write not only the
sha1 of the tag object along with the ref, but also the sha1
obtained by peeling the tag. This lets readers of the
pack-refs file know the peeled value without having to
actually load the object, speeding up upload-pack's ref
advertisement.
The writer marks a packed-refs file with peeled refs using
the "peeled" trait at the top of the file. When the reader
sees this trait, it knows that each ref is either followed
by its peeled value, or it is not an annotated tag.
However, there is a mismatch between the assumptions of the
reader and writer. The writer will only peel refs under
refs/tags, but the reader does not know this; it will assume
a ref without a peeled value must not be a tag object. Thus
an annotated tag object placed outside of the refs/tags
hierarchy will not have its peeled value printed by
upload-pack.
The simplest way to fix this is to start writing peel values
for all refs. This matches what the reader expects for both
new and old versions of git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git pull passed -q and -v only to git merge, but they can be useful for
git rebase as well, so pass them there, too.
In particular, using -q shuts up the "Already up-to-date." message.
Especially, a new test script runs the same "pull --rebase" twice to
make sure both cases are quiet, when it has something to fetch and
when it is already up to date.
Signed-off-by: Peter Eisentraut <peter@eisentraut.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack receives a "want" line from the client, it
adds it to an object array. We call lookup_object to find
the actual object, which will only check for objects already
in memory. This works because we are expecting to find
objects that we already loaded during the ref advertisement.
We use the resulting object structs for a variety of
purposes. Some of them care only about the object flags, but
others care about the type of the object (e.g.,
ok_to_give_up), or even feed them to the revision parser
(when --depth is used), which assumes that objects it
receives are fully parsed.
Once upon a time, this was OK; any object we loaded into
memory would also have been parsed. But since 435c833
(upload-pack: use peel_ref for ref advertisements,
2012-10-04), we try to avoid parsing objects during the ref
advertisement. This means that lookup_object may return an
object with a type of OBJ_NONE. The resulting mess depends
on the exact set of objects, but can include the revision
parser barfing, or the shallow code sending the wrong set of
objects.
This patch teaches upload-pack to parse each "want" object
as we receive it. We do not replace the lookup_object call
with parse_object, as the current code is careful not to let
just any object appear on a "want" line, but rather only one
we have previously advertised (whereas parse_object would
actually load any arbitrary object from disk).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prints more helpful info when HEAD is detached: is it detached
because of bisect or rebase? What is the original branch name in those
cases? Is it detached because the user checks out a remote ref or a
tag (and which one)?
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote ref or a tag is checked out, HEAD is automatically
detached. There is no user-friendly way to find out what ref is
checked out in this case. This patch digs in reflog for this
information and shows "HEAD detached from origin/master" or "HEAD
detached at v1.8.0" instead of "currently not on any branch".
When it cannot figure out the original ref, it shows an abbreviated
SHA-1. "Currently not on any branch" would never display (unless
reflog is pruned to near empty that the last checkout entry is lost).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking up the stream filter, write_entry() should be passing the
path of the file in the repository, not the path to which the content is
going to be written. This allows the file to be correctly looked up
against the .gitattributes files in the working tree.
This change makes the streaming case match the non-streaming case which
passes ce->name to convert_to_working_tree later in the same function.
The two tests added here test the different paths through write_entry
since the CRLF filter is a streaming filter but the user-defined smudge
filter is not streamed.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Description goes on the test_expect_* line
- Open SQ of test goes on the test_expect_* line
- Closing SQ of test goes on its own line
- Use TAB for indent
Also remove three comments that appear to relate to the development of
the patch before it was committed.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combined diff --cc output does not honor options to ignore
whitespace changes (-b, -w, and --ignore-space-at-eol).
Correct this by passing diff flags to diff engine, so that combined
diff behaves as normal diff does with spaces, and by coalescing
lines that are removed from both (or more) parents, honoring the
same rule to ignore whitespace changes.
With this change, a conflict-less merge done using a ignore-*
strategy option will not show any conflict if shown in combined-diff
using the same option.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users like to edit files in their diff tool when using "git
difftool --dir-diff --symlink" to compare against the working tree but
difftool currently only created symlinks when a file contains unstaged
changes.
Change this behaviour so that symlinks are created whenever the
right-hand side of the comparison has the same SHA1 as the file in the
working tree.
Note that textconv filters are handled in the same way as by git-diff
and if a clean filter is not the inverse of its smudge filter we already
get a null SHA1 from "diff --raw" and will symlink the file without
going through the new hash-object based check.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This behavior is due to change in the future, but let's test
it anyway. That helps make sure we do not accidentally
switch the behavior too soon while we are working in the
area, and it means that we can easily verify the change when
we do make it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag --force" mentions what old tag object is being replaced
when it is used to update an existing tag, but it shows the same
message when creating a new one. Stop doing that, as it does not
add any information.
Add a test for this and also to ensure --force can replace tags at
all.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generic chdir() helper sets the PWD environment
variable, as that is what is used by p4 to know its
current working directory. Normally the shell would
do this, but in git-p4, we must do it by hand.
However, when the path contains a symbolic link,
os.getcwd() will return the physical location. If the
p4 client specification includes symlinks, setting PWD
to the physical location causes p4 to think it is not
inside the client workspace. It complains, e.g.
Path /vol/bar/projects/foo/... is not under client root /p/foo
One workaround is to use AltRoots in the p4 client specification,
but it is cleaner to handle it directly in git-p4.
Other uses of chdir still require setting PWD to an
absolute path so p4 features like P4CONFIG work. See
bf1d68f (git-p4: use absolute directory for PWD env
var, 2011-12-09).
[ pw: tweak patch and commit message ]
Thanks-to: John Keeping <john@keeping.me.uk>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails when the p4 client root includes
a symlink. It complains:
Path /vol/bar/projects/foo/... is not under client root /p/foo
and dumps a traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archive relies on get_pathspec to convert its argv into
a list of pathspecs. When get_pathspec is given an empty
argv list, it returns a single pathspec, the empty string,
to indicate that everything matches. When we feed this to
our path_exists function, we typically see that the pathspec
turns up at least one item in the tree, and we are happy.
But when our tree is empty, we erroneously think it is
because the pathspec is too limited, when in fact it is
simply that there is nothing to be found in the tree. This
is a weird corner case, but the correct behavior is almost
certainly to produce an empty archive, not to exit with an
error.
This patch teaches git-archive to create empty archives when
there is no pathspec given (we continue to complain if a
pathspec is given, since it obviously is not matched). It
also confirms that the tar and zip writers produce sane
output in this instance.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set up the $GIT_UNZIP variable and lazy prereq in
multiple places (and the next patch is about to add another
one). Let's factor it out to avoid repeating ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the documentation of GIT_PERF_REPEAT_COUNT says the default is
five while "perf-lib.sh" uses a value of three as a default.
Update the documentation so that it is consistent with the code.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though an earlier attempt (bafc478..41dd00bad) cleaned
up RFC 2047 encoding, pretty.c::add_rfc2047() still decides
where to split the output line by going through the input
one byte at a time, and potentially splits a character in
the middle. A subject line may end up showing like this:
".... fö?? bar". (instead of ".... föö bar".)
if split incorrectly.
RFC 2047, section 5 (3) explicitly forbids such beaviour
Each 'encoded-word' MUST represent an integral number of
characters. A multi-octet character may not be split across
adjacent 'encoded- word's.
that means that e.g. for
Subject: .... föö bar
encoding
Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?=
=?UTF-8?q?=20bar?=
is correct, and
Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here
=?UTF-8?q?=B6=20bar?=
is not, because "ö" character UTF-8 encoding C3 B6 is split here across
adjacent encoded words.
To fix the problem, make the loop grab one _character_ at a time and
determine its output length to see where to break the output line. Note
that this version only knows about UTF-8, but the logic to grab one
character is abstracted out in mbs_chrlen() function to make it possible
to extend it to other encodings with the help of iconv in the future.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git add subdir/" is run without "-u" or "-A" option, e.g.
$ edit subdir/x
$ create subdir/y
$ rm subdir/z
$ git add subdir/
the command does not notice removal of paths (e.g. subdir/z) from
the working tree. This sometimes confuses new people, as arguably
"git add" is told to record the current state of "subdir/" as a
whole, not the current state of the paths that exist in the working
tree that matches that pathspec (the latter by definition excludes
the state of "subdir/z" because it does not exist in the working
tree).
Plan to eventually make "git add" pretend as if "-A" is given when
there is a pathspec on the command line. When resolving a conflict
to remove a path, the current code tells you to "git rm $path", but
with such a change, you will be able to say "git add $path" (of
course you can do "git add -A $path" today). That means that we can
simplify the advice messages given by "git status". That all will
be in Git 2.0 or later, if we are going to do so.
For that transition to work, people need to learn either to say "git
add --no-all subdir/" when they want to ignore the removed paths
like "subdir/z", or to say "git add -A subdir/" when they want to
take the state of the directory as a whole.
"git add" without any argument will continue to be a no-op.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an explicit GIT_DIR is given without a working tree, we
implicitly assume that the current working directory should
be used as the working tree. E.g.,:
GIT_DIR=/some/repo.git git status
would compare against the cwd.
Unfortunately, we fool this rule for sub-invocations of git
by setting GIT_DIR internally ourselves. For example:
git init foo
cd foo/.git
git status ;# fails, as we expect
git config alias.st status
git status ;# does not fail, but should
What happens is that we run setup_git_directory when doing
alias lookup (since we need to see the config), set GIT_DIR
as a result, and then leave GIT_WORK_TREE blank (because we
do not have one). Then when we actually run the status
command, we do setup_git_directory again, which sees our
explicit GIT_DIR and uses the cwd as an implicit worktree.
It's tempting to argue that we should be suppressing that
second invocation of setup_git_directory, as it could use
the values we already found in memory. However, the problem
still exists for sub-processes (e.g., if "git status" were
an external command).
You can see another example with the "--bare" option, which
sets GIT_DIR explicitly. For example:
git init foo
cd foo/.git
git status ;# fails
git --bare status ;# does NOT fail
We need some way of telling sub-processes "even though
GIT_DIR is set, do not use cwd as an implicit working tree".
We could do it by putting a special token into
GIT_WORK_TREE, but the obvious choice (an empty string) has
some portability problems.
Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE,
which suppresses the use of cwd as a working tree when
GIT_DIR is set. We trigger the new variable when we know we
are in a bare setting.
The variable is left intentionally undocumented, as this is
an internal detail (for now, anyway). If somebody comes up
with a good alternate use for it, and once we are confident
we have shaken any bugs out of it, we can consider promoting
it further.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a test for the fix in bf1d68f (git-p4: use absolute
directory for PWD env var, 2011-12-09). It is necessary to
set PWD to an absolute path so that p4 can find files referenced
by non-absolute paths, like the value of the P4CONFIG environment
variable.
P4 does not open files directly; it builds a path by prepending
the contents of the PWD environment variable.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic use cases and corner cases tests for
"git diff -M --summary/stat".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option "--follow-tags" tells "git push" to push annotated
tags that are missing from the other side and that can be reached by
the history that is otherwise pushed out.
For example, if you are using the "simple", "current", or "upstream"
push, you would ordinarily push the history leading to the commit at
your current HEAD and nothing else. With this option, you would
also push all annotated tags that can be reached from that commit to
the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when using update with recursion, only the path for the
inner-most module was printed. Now the path is printed relative to
the directory the command was started from. This now matches the
behavior of submodule foreach.
Signed-off-by: William Entriken <github.com@phor.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 82dce99 (attr: more matching optimizations from .gitignore,
2012-10-15), .gitattributes did not have any special treatment of a
leading '!'. The docs, however, always said
The rules how the pattern matches paths are the same as in
`.gitignore` files; see linkgit:gitignore[5].
By those rules, leading '!' means pattern negation. So 82dce99
correctly determined that this kind of line makes no sense and should
be disallowed.
However, users who actually had a rule for files starting with a '!'
are in a bad position: before 82dce99 '!' matched that literal
character, so it is conceivable that users have .gitattributes with
such lines in them. After 82dce99 the unescaped version was
disallowed in such a way that git outright refuses to run(!) most
commands in the presence of such a .gitattributes. It therefore
becomes very hard to fix, let alone work with, such repositories.
Let's at least allow the users to fix their repos: change the fatal
error into a warning.
Reported-by: mathstuf@gmail.com
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With core.ignorecase=true, name-hash.c builds a case insensitive index of
all tracked directories. Currently, the existing cache entry structures are
added multiple times to the same hashtable (with different name lengths and
hash codes). However, there's only one dir_next pointer, which gets
completely messed up in case of hash collisions. In the worst case, this
causes an endless loop if ce == ce->dir_next (see t7062).
Use a separate hashtable and separate structures for the directory index
so that each directory entry has its own next pointer. Use reference
counting to track which directory entry contains files.
There are only slight changes to the name-hash.c API:
- new free_name_hash() used by read_cache.c::discard_index()
- remove_name_hash() takes an additional index_state parameter
- index_name_exists() for a directory (trailing '/') may return a cache
entry that has been removed (CE_UNHASHED). This is not a problem as the
return value is only used to check if the directory exists (dir.c) or to
normalize casing of directory names (read-cache.c).
Getting rid of cache_entry.dir_next reduces memory consumption, especially
with core.ignorecase=false (which doesn't use that member at all).
With core.ignorecase=true, building the directory index is slightly faster
as we add / check the parent directory first (instead of going through all
directory levels for each file in the index). E.g. with WebKit (~200k
files, ~7k dirs), time spent in lazy_init_name_hash is reduced from 176ms
to 130ms.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier workaround designed to help people who list logical
directories that will not match what getcwd(3) returns in the
GIT_CEILING_DIRECTORIES had an adverse effect when it is slow to
stat and readlink a directory component of an element listed on it.
* mh/maint-ceil-absolute:
Provide a mechanism to turn off symlink resolution in ceiling paths
Currently ZIP archive entries of files with export-subst attribute are
broken if they are stored uncompressed.
We get the size of a file from sha1_object_info(), but this number is
likely wrong for files whose contents are changed due to export-subst
placeholder expansion. We use sha1_file_to_archive() to get the
expanded file contents and size in that case. We proceed to use that
size for the uncompressed size field (good), but the compressed size
field is set based on the size from sha1_object_info() (bad).
This matters only for uncompressed files because for deflated files
we use the correct value after compression is done. And for files
without export-subst expansion the sizes from sha1_object_info() and
sha1_file_to_archive() are the same, so they are unaffected as well.
This patch fixes the issue by setting the compressed size based on the
uncompressed size only after we actually know the latter.
Also make use of the test file substfile1 to check for the breakage;
it was only stored verbatim so far. For that purpose, set the
attribute export-subst and replace its contents with the expected
expansion after committing.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-ignore ." segfaulted, as a function it calls deep in its
callchain took a string in the <ptr, length> form but did not stop
when given an empty string.
* as/check-ignore:
name-hash: allow hashing an empty string
t0008: document test_expect_success_multi
"Advice" is a mass noun, not a count noun; it's not ordinarily
pluralized.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust test commands and test suites so that their
usage strings are consistent with Git.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch_get() can return NULL (so far on detached HEAD only) but some
code paths in builtin/branch.c cannot deal with that and cause
segfaults.
While at there, make sure to bail out when the user gives 2 or more
branches with --set-upstream-to or --unset-upstream, where only the
first branch is processed and the rest silently dropped.
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'commit -s' populates the edit buffer with a blank line before the
Signed-off-by line, to allow the user to immediately start typing
the log message. But commit 33f2f9ab removed this space, forcing
the user to first push the Signed-off-by line down to open a place
to type the log message.
Fix this regression and let's ensure that the Signed-off-by line is
preceded by two blank lines, instead of just one, to hint that
something should be filled in, and that a blank line should separate
it from the body and the Signed-off-by line.
Add a test for this behavior.
Reported-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests call test_set_editor to set an alternate editor script, but
they appear to presume that the assignment is of a temporary nature and
will not have any effect outside of each individual test. That is not
the case. All of the test functions within a test script share a single
environment, so any variables modified in one, are visible in the ones
that follow.
So, let's protect the test functions that follow these, which set an
alternate editor, by performing the test_set_editor and 'git commit'
in a subshell.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1b77d83cab 'setup_git_directory_gently_1(): resolve symlinks
in ceiling paths' changed the setup code to resolve symlinks in the
entries in GIT_CEILING_DIRECTORIES. Because those entries are
compared textually to the symlink-resolved current directory, an
entry in GIT_CEILING_DIRECTORIES that contained a symlink would have
no effect. It was known that this could cause performance problems
if the symlink resolution *itself* touched slow filesystems, but it
was thought that such use cases would be unlikely. The intention of
the earlier change was to deal with a case when the user has this:
GIT_CEILING_DIRECTORIES=/home/gitster
but in reality, /home/gitster is a symbolic link to somewhere else,
e.g. /net/machine/home4/gitster. A textual comparison between the
specified value /home/gitster and the location getcwd(3) returns
would not help us, but readlink("/home/gitster") would still be
fast.
After this change was released, Anders Kaseorg <andersk@mit.edu>
reported:
> [...] my computer has been acting so slow when I’m not connected to
> the network. I put various network filesystem paths in
> $GIT_CEILING_DIRECTORIES, such as
> /afs/athena.mit.edu/user/a/n/andersk (to avoid hitting its parents
> /afs/athena.mit.edu, /afs/athena.mit.edu/user/a, and
> /afs/athena.mit.edu/user/a/n which all live in different AFS
> volumes). Now when I’m not connected to the network, every
> invocation of Git, including the __git_ps1 in my shell prompt, waits
> for AFS to timeout.
To allow users to work around this problem, give them a mechanism to
turn off symlink resolution in GIT_CEILING_DIRECTORIES entries. All
the entries that follow an empty entry will not be checked for symbolic
links and used literally in comparison. E.g. with these:
GIT_CEILING_DIRECTORIES=:/foo/bar:/xyzzy or
GIT_CEILING_DIRECTORIES=/foo/bar::/xyzzy
we will not readlink("/xyzzy") because it comes after an empty entry.
With the former (but not with the latter), "/foo/bar" comes after an
empty entry, and we will not readlink it, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
073678b8e6 reworked the
mergetools/ directory so that every file corresponds to a
difftool-supported tool. When this happened the "defaults"
file went away as it was no longer needed by mergetool--lib.
t7800 tests that configured commands can override builtins,
but this test was not adjusted when the "defaults" file was
removed because the test continued to pass.
Adjust the test to use the everlasting "vimdiff" tool name
instead of "defaults" so that it correctly tests against a tool
that is known by mergetool--lib.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate a lot of redundant work by using test_config().
Catch more return codes by more use of temporary files
and test_cmp.
The original tests relied upon restore_test_defaults()
from the previous test to provide the next test with a sane
environment. Make the tests do their own setup so that they
are not dependent on the success of the previous test.
The end result is shorter tests and better test isolation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you set the GIT_DEBUG_SEND_PACK environment variable,
upload-pack will dump lines it receives in the receive_needs
phase to a descriptor. This debugging harness is a strict
subset of what GIT_TRACE_PACKET can do. Let's just drop it
in favor of that.
A few tests used GIT_DEBUG_SEND_PACK to confirm which
objects get sent; we have to adapt them to the new output
format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we do not pass an empty string to the function hash_name()
because we almost always ask for hash values for a path that is a
candidate to be added to the index. However, check-ignore (and most
likely check-attr, but I didn't check) apparently has a callchain
to ask the hash value for an empty path when it was given a "." from
the top-level directory to ask "Is the path . excluded by default?"
Make sure that hash_name() does not overrun the end of the given
pathname even when it is empty.
Remove a sweep-the-issue-under-the-rug conditional in check-ignore
that avoided to pass an empty string to the callchain while at it.
It is a valid question to ask for check-ignore if the top-level is
set to be ignored by default, even though the answer is most likely
no, if only because there is currently no way to specify such an
entry in the .gitignore file. But it is an unusual thing to ask and
it is not worth optimizing for it by special casing at the top level
of the call chain.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_success_multi() helper function warrants some explanation,
since at first sight it may seem like generic test framework plumbing,
but is in fact specific to testing check-ignore, and allows more
thorough testing of the various output formats without significantly
increase the size of t0008.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git will append two newlines to every message supplied via
the -m switch. The purpose of this is to allow -m to be supplied
multiple times and have each supplied string become a paragraph in the
resulting commit message.
Normally, this does not cause a problem since any trailing newlines will
be removed by the cleanup operation. If cleanup=verbatim for example,
then the trailing newlines will not be removed and will survive into the
resulting commit message.
Instead, let's ensure that the string supplied to -m is newline terminated,
but only append a second newline when appending additional messages.
Fixes the test in t7502.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test attempts to verify that a commit message supplied to 'git
commit' via the -m switch was used in full as the commit message for a
commit when --cleanup=verbatim was used.
But, this test has been broken since it was introduced. Since the
commit message containing trailing newlines was supplied to 'git commit'
using a command substitution, the trailing newlines were removed by the
shell. This means that a string without any trailing newlines was
actually supplied to 'git commit'.
The test was able to complete successfully since internally, git appends
two newlines to each string supplied via the -m switch. So, the two
newlines removed by the shell were then re-added by git, and the
resulting commit matched what was expected.
So, let's move the initial creation of the commit message string out
from within a previous test so that it stands alone. Assign the desired
commit message to a variable using literal newlines. Then populate the
expect file from the contents of the commit message variable. This way
the shell variable becomes the authoritative source of the commit
message and can be supplied via the -m switch with the trailing newlines
intact.
Mark this test as failing, since it is not handled correctly by git.
As described above, git appends two extra newlines to every string
supplied via -m, even to the ones that already end with a newline.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test attempts to verify that a commit in "verbatim" mode, when
supplied a commit template, produces a commit in which the commit
message matches exactly the template that was supplied. But, since the
commit operation appends additional instructions for the user as
comments in the commit buffer, which would cause the comparison to fail,
this test decided to compare only the first three lines (the length of
the template) of the resulting commit message to the original template
file.
This has two problems.
1. It does not allow the template to be lengthened or shortened
without also modifying the number of lines that are considered
significant (i.e. the argument to 'head -n').
2. It will not catch a bug in git that causes git to append additional
lines to the commit message.
So, let's use the --no-status option to 'git commit' which will cause
git to refrain from appending the lines of instructional text to the
commit message. This will allow the entire resulting commit message to
be compared against the expected value.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
"git log --grep=<pattern>" used to look for the pattern in literal
bytes of the commit log message and ignored the log-output encoding.
* jk/read-commit-buffer-data-after-free:
log: re-encode commit messages before grepping
prepare_packed_git_one() is modified to allow count-objects to hook a
report function to so we don't need to duplicate the pack searching
logic in count-objects.c. When report_pack_garbage is NULL, the
overhead is insignificant.
The garbage is reported with warning() instead of error() in packed
garbage case because it's not an error to have garbage. Loose garbage
is still reported as errors and will be converted to warnings later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 3 extra tests for the bash.showDirtyState config option; the
tests now cover all combinations of the shell var being set/unset
and the config option being missing/enabled/disabled, given a dirty
file.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 4 tests for the bash.showUntrackedFiles config option, covering
all combinations of the shell var being set/unset and the config
option being enabled/disabled (the other 2 cases, missing config
with and without shell variable, are already covered by existing
tests).
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eff80a9 (Allow custom "comment char") introduced a custom comment
character for commit messages but did not teach git-rebase--interactive
to use it.
Change git-rebase--interactive to read core.commentchar and use its
value when generating commit messages and for the command list.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two implementations of append_signoff in log-tree.c and
sequencer.c, which do more or less the same thing. Unify on top of the
sequencer.c implementation.
Add a test in t4014 to demonstrate support for non-s-o-b elements in the
commit footer provided by sequence.c:append_sob. Mark tests fixed as
appropriate.
[Commit message mostly stolen from Nguyễn Thái Ngọc Duy's original
unification patch]
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[bc: Squash the tests from Duy's original unify-appending-sob series.
Fix test 90 "signoff: some random signoff-alike" and mark as failing.
Correct behavior should insert a blank line after message body and
signed-off-by.
Add two additional tests:
1. failure to detect non-conforming elements in the footer when last
line matches committer's s-o-b.
2. ensure various s-o-b -like elements in the footer are handled as
conforming. e.g. "Change-id: IXXXX or Bug: 1234"
]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach append_signoff how to detect a duplicate s-o-b in the commit footer.
This is in preparation to unify the append_signoff implementations in
log-tree.c and sequencer.c.
Fixes test in t3511.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start treating the "(cherry picked from" line added by cherry-pick -x
the same way that the s-o-b lines are treated. Namely, separate them
from the main commit message body with an empty line.
Introduce tests to test this functionality.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'cherry-pick -s' is used to append a signed-off-by line to a cherry
picked commit, it does not currently detect the "(cherry picked from..."
that may have been appended by a previous 'cherry-pick -x' as part of the
s-o-b footer and it will insert a blank line before appending a new s-o-b.
Let's detect "(cherry picked from...)" as part of the footer so that we
will produce this:
Signed-off-by: A U Thor <author@example.com>
(cherry picked from da39a3ee5e6b4b0d3255bfef95601890afd80709)
Signed-off-by: C O Mmitter <committer@example.com>
instead of this:
Signed-off-by: A U Thor <author@example.com>
(cherry picked from da39a3ee5e6b4b0d3255bfef95601890afd80709)
Signed-off-by: C O Mmitter <committer@example.com>
[with improvements from Jonathan Nieder]
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some tests to ensure that 'cherry-pick -s' operates in the following
manner:
* Inserts a blank line before appending a s-o-b to a commit message that
does not contain a s-o-b footer
* Does not mistake first line "subject: description" as a s-o-b footer
* Does not mistake single word message body as conforming to rfc2822
* Appends a s-o-b when last s-o-b in footer does not match committer
s-o-b, even when committer's s-o-b exists elsewhere in footer.
* Does not append a s-o-b when last s-o-b matches committer s-o-b
* Correctly detects a non-conforming footer containing a mix of s-o-b
like elements and s-o-b elements. (marked "expect failure")
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <message> part of test_commit() may not be appropriate for a tag name.
So let's allow test_commit to accept a fourth argument to specify the tag
name.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --grep=foo", we will run your regex on
the literal bytes of the commit message. This can provide
confusing results if the commit message is not in the same
encoding as your grep expression (or worse, you have commits
in multiple encodings, in which case your regex would need
to be written to match either encoding). On top of this, we
might also be grepping in the commit's notes, which are
already re-encoded, potentially leading to grepping in a
buffer with mixed encodings concatenated. This is insanity,
but most people never noticed, because their terminal and
their commit encodings all match.
Instead, let's massage the to-be-grepped commit into a
standardized encoding. There is not much point in adding a
flag for "this is the encoding I expect my grep pattern to
match"; the only sane choice is for it to use the log output
encoding. That is presumably what the user's terminal is
using, and it means that the patterns found by the grep will
match the output produced by git.
As a bonus, this fixes a potential segfault in commit_match
when commit->buffer is NULL, as we now build on logmsg_reencode,
which handles reading the commit buffer from disk if
necessary. The segfault can be triggered with:
git commit -m 'text1' --allow-empty
git commit -m 'text2' --allow-empty
git log --graph --no-walk --grep 'text2'
which arguably does not make any sense (--graph inherently
wants a connected history, and by --no-walk the command line
is telling us to show discrete points in history without
connectivity), and we probably should forbid the
combination, but that is a separate issue.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smart HTTP clients forgot to verify the content-type that comes
back from the server side to make sure that the request is being
handled properly.
* sp/smart-http-content-type-check:
http_request: reset "type" strbuf before adding
t5551: fix expected error output
Verify Content-Type from smart HTTP servers
We used to have an arbitrary 32 limit for combined diff input,
resulting in incorrect number of leading colons shown when showing
the "--raw --cc" output.
* jc/combine-diff-many-parents:
t4038: add tests for "diff --cc --raw <trees>"
combine-diff: lift 32-way limit of combined diff
"git cherry-pick" did not replay a root commit to an unborn branch.
* mz/pick-unborn:
learn to pick/revert into unborn branch
tests: move test_cmp_rev to test-lib-functions
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Rebasing the history of superproject with change in the submodule
has been broken since v1.7.12.
* jc/fake-ancestor-with-non-blobs:
apply: diagnose incomplete submodule object name better
apply: simplify build_fake_ancestor()
git-am: record full index line in the patch used while rebasing
Fix various error messages and conditions in "git branch", e.g. we
advertised "branch -d/-D" to remove one or more branches but actually
implemented removal of zero or more branches---request to remove no
branches was not rejected.
* nd/branch-error-cases:
branch: let branch filters imply --list
docs: clarify git-branch --list behavior
branch: mark more strings for translation
branch: give a more helpful message on redundant arguments
branch: reject -D/-d without branch name
Teach "git fetch" to accept an exact SHA-1 object name the user may
obtain out of band on the LHS of a pathspec, and send it on a "want"
message when the server side advertises the allow-tip-sha1-in-want
capability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository may have refs that are only used for its internal
bookkeeping purposes that should not be exposed to the others that
come over the network.
Teach upload-pack to omit some refs from its initial advertisement
by paying attention to the uploadpack.hiderefs multi-valued
configuration variable. Do the same to receive-pack via the
receive.hiderefs variable. As a convenient short-hand, allow using
transfer.hiderefs to set the value to both of these variables.
Any ref that is under the hierarchies listed on the value of these
variable is excluded from responses to requests made by "ls-remote",
"fetch", etc. (for upload-pack) and "push" (for receive-pack).
Because these hidden refs do not count as OUR_REF, an attempt to
fetch objects at the tip of them will be rejected, and because these
refs do not get advertised, "git push :" will not see local branches
that have the same name as them as "matching" ones to be sent.
An attempt to update/delete these hidden refs with an explicit
refspec, e.g. "git push origin :refs/hidden/22", is rejected. This
is not a new restriction. To the pusher, it would appear that there
is no such ref, so its push request will conclude with "Now that I
sent you all the data, it is time for you to update the refs. I saw
that the ref did not exist when I started pushing, and I want the
result to point at this commit". The receiving end will apply the
compare-and-swap rule to this request and rejects the push with
"Well, your update request conflicts with somebody else; I see there
is such a ref.", which is the right thing to do. Otherwise a push to
a hidden ref will always be "the last one wins", which is not a good
default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing the history of superproject with change in the submodule
was broken since v1.7.12.
* jc/fake-ancestor-with-non-blobs:
apply: diagnose incomplete submodule object name better
apply: simplify build_fake_ancestor()
git-am: record full index line in the patch used while rebasing
The typical use-case is starting a rebase, do something else, come
back the day after, run "git status" or make a new commit and wonder
what in the world's going on. Which branch is being rebased is
probably the most useful tidbit to help, but the target may help
too.
Ideally, I would have loved to see "rebasing master on
origin/master", but the target ref name is not stored during rebase,
so this patch writes "rebasing master on a78c8c98b" as a
half-measure to remind future users of that potential improvement.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve "git p4" on Cygwin.
* pw/git-p4-on-cygwin: (21 commits)
git p4: introduce gitConfigBool
git p4: avoid shell when calling git config
git p4: avoid shell when invoking git config --get-all
git p4: avoid shell when invoking git rev-list
git p4: avoid shell when mapping users
git p4: disable read-only attribute before deleting
git p4 test: use test_chmod for cygwin
git p4: cygwin p4 client does not mark read-only
git p4 test: avoid wildcard * in windows
git p4 test: use LineEnd unix in windows tests too
git p4 test: newline handling
git p4: scrub crlf for utf16 files on windows
git p4: remove unreachable windows \r\n conversion code
git p4 test: translate windows paths for cygwin
git p4 test: start p4d inside its db dir
git p4 test: use client_view in t9806
git p4 test: avoid loop in client_view
git p4 test: use client_view to build the initial client
git p4: generate better error message for bad depot path
git p4: remove unused imports
...
Clarify the ownership rule for commit->buffer field, which some
callers incorrectly accessed without making sure it is populated.
* jk/read-commit-buffer-data-after-free:
logmsg_reencode: lazily load missing commit buffers
logmsg_reencode: never return NULL
commit: drop useless xstrdup of commit message
Configuration parsing for tar.* configuration variables were
broken. Introduce a new config-keyname parser API to make the
callers much less error prone.
* jk/config-parsing-cleanup:
reflog: use parse_config_key in config callback
help: use parse_config_key for man config
submodule: simplify memory handling in config parsing
submodule: use parse_config_key when parsing config
userdiff: drop parse_driver function
convert some config callbacks to parse_config_key
archive-tar: use parse_config_key when parsing config
config: add helper function for parsing key names
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
Before parsing a suspected smart-HTTP response verify the returned
Content-Type matches the standard. This protects a client from
attempting to process a payload that smells like a smart-HTTP
server response.
JGit has been doing this check on all responses since the dawn of
time. I mistakenly failed to include it in git-core when smart HTTP
was introduced. At the time I didn't know how to get the Content-Type
from libcurl. I punted, meant to circle back and fix this, and just
plain forgot about it.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/merge-blobs:
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
With small updates to remove dependency on newer features of
Python, keep git-p4 usable with older Python.
* bc/git-p4-for-python-2.4:
INSTALL: git-p4 does not support Python 3
git-p4.py: support Python 2.4
git-p4.py: support Python 2.5
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
"git fetch --depth" was broken in at least three ways. The
resulting history was deeper than specified by one commit, it was
unclear how to wipe the shallowness of the repository with the
command, and documentation was misleading.
* nd/fetch-depth-is-broken:
fetch: elaborate --depth action
upload-pack: fix off-by-one depth calculation in shallow clone
fetch: add --unshallow for turning shallow repo into complete one
Earlier, a230949 (am --rebasing: get patch body from commit, not
from mailbox, 2012-06-26) learned to regenerate patch body from the
commit object while rebasing, instead of reading from the rebase-am
front-end. While doing so, it used "git diff-tree" but without
giving it the "--full-index" option.
This does not matter for in-repository objects; during rebasing, any
abbreviated object name should uniquely identify them.
But we may be rebasing a commit that contains a change to a gitlink,
in which case we usually should not have the object (it names a
commit in the submodule). A full object name is necessary to later
reconstruct a fake ancestor index for them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
