We allow send-email to use an implicitly-defined identity
for the sender (because there is still a confirmation step),
but we abort when we cannot generate such an identity. Let's
make sure that we test this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to try expanding malformed "$keyword$" that spans
across multiple lines.
* pw/maint-p4-rcs-expansion-newline:
git p4: RCS expansion should not span newlines
We do not currently have any explicit tests for "git var" at
all (though we do exercise it to some degree as a part of
other tests). Let's add a few basic sanity checks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A tree with meta-paths like '.' or '..' does not work well
with git; the index will refuse to load it or check it out
to the filesystem (and even if we did not have that safety,
it would look like we were overwriting an untracked
directory). For the same reason, it is difficult to create
such a tree with regular git.
Let's warn about these dubious entries during fsck, just in
case somebody has created a bogus tree (and this also lets
us prevent them from propagating when transfer.fsckObjects
is set).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strictly speaking bzr doesn't need any changes to interact with remote
repositories, but it's dead slow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The context of the example to push into refs/remotes/satellite/
hierarchy of the other repository needs to be spelled out explicitly
for the value of this example to be fully appreciated. Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configure script checks whether certain flags are required to use
pthreads. But it did not consider that *none* might be needed (as is the
case on Mac OS X). This lead to configure adding "-mt" to the list of
flags (which does nothing on OS X except producing a warning). This in
turn triggered a compiler warning on every single file.
To solve this, we now first check if pthreads work without extra flags.
This means the check is now order dependant, hence a comment is added
explaining this, and the reasons for it.
Note that it might be possible to write an order independent test, but
it does not seem worth the extra effort required for implementing and
testing such a solution, when this simple solution exists and works.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Amit Bakshi reported, older versions of python (< 2.7) don't have
subprocess.check_output, so let's use subprocess.Popen directly as
suggested.
Suggested-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/update-ref-d-through-symref:
Fix failure to delete a packed ref through a symref
t1400-update-ref: Add test verifying bug with symrefs in delete_ref()
Even though we show a separate *UNMERGED* entry in the patch and
diffstat output (or in the --raw format, for that matter) in
addition to and separately from the diff against the specified stage
(defaulting to #2) for unmerged paths, they should not be counted in
the total number of files affected---that would lead to counting the
same path twice.
The separation done by the previous step makes this fix simple and
straightforward. Among the filepairs in diff_queue, paths that
weren't modified, and the extra "unmerged" entries do not count as
total number of files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat generation logic, with --stat-count limit, is
implemented as three loops.
- The first counts the width necessary to show stats up to
specified number of entries, and notes up to how many entries in
the data we need to iterate to show the graph;
- The second iterates that many times to draw the graph, adjusts
the number of "total modified files", and counts the total
added/deleted lines for the part that was shown in the graph;
- The third iterates over the remainder and only does the part to
count "total added/deleted lines" and to adjust "total modified
files" without drawing anything.
Move the logic to count added/deleted lines and modified files from
the second loop to the third loop.
This incidentally fixes a bug. The third loop was not filtering
binary changes (counted in bytes) from the total added/deleted as it
should. The second loop implemented this correctly, so if a binary
change appeared earlier than the --stat-count cutoff, the code
counted number of added/deleted lines correctly, but if it appeared
beyond the cutoff, the number of lines would have mixed with the
byte count in the buggy third loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few problems in diff.c around --stat area, partially
caused by the recent 74faaa1 (Fix "git diff --stat" for interesting
- but empty - file changes, 2012-10-17), and largely caused by the
earlier change that introduced when --stat-count was added.
Add a few test pieces to t4049 to expose the issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users sometimes alias the 'git' command to another name. In
this case, the user expects to only have to issue a new 'complete'
command using the alias name.
However, the tcsh script currently uses the command typed by the
user to call the appropriate function in git-completion.bash, either
_git() or _gitk(). When using an alias, this technique no longer
works.
This change specifies the real name of the command (either 'git' or
'gitk') as a parameter to the script handling tcsh completion. This
allows the user to use any alias for the 'git' or 'gitk' commands,
while still getting completion to work.
A check for the presence of ${HOME}/.git-completion.bash is also
added to help the user make use of the script properly.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current version contains the sentence:
Further suppose that the other person already pushed changes leading to
A back to the original repository you two obtained the original commit
X.
which doesn't parse for me; I've changed it to
Further suppose that the other person already pushed changes leading to
A back to the original repository from which you two obtained the
original commit X.
Signed-off-by: Mark Szepieniec <mszepien@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases the user may want to send email with "Cc:" line with
email address we cannot extract. Now we allow user to extract
such email address for us.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to warn about invalid emails and just drop them. Such warnings
can be unnoticed by user or noticed after sending email when we are not
giving the "final sanity check [Y/n]?"
Now we quit by default.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some addresses are passed twice to unique_email_list() and invalid addresses
may be reported twice per send_message. Now we warn about them earlier
and we also remove invalid addresses.
This also removes using of undefined values for string comparison
for invalid addresses in cc list processing.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document contains no new policies or proposals; it attempts to
document established practices and interface requirements.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, read_message() didn't distinguish between an error and eof
when reading its input. This could have resulted in incorrect
behavior if there was an error: (1) reporting "nothing to send" if no
bytes were read or (2) sending an incomplete message if some bytes
were read before the error.
Change read_message() to return -1 on ferror()s and 0 on success, so
that the caller can recognize that an error occurred. (The return
value used to be the length of the input read, which was redundant
because that is already available as the strbuf length.
Change the caller to report errors correctly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
all_msgs is only used as a glorified string, therefore there is no
reason to declare it as a struct msg_data.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Through the rest of the file, the data member of struct msg_data is
kept NUL-terminated, and that fact is relied upon in a couple of
places. Change lf_to_crlf() to preserve this invariant.
In fact, there are no execution paths in which lf_to_crlf() is called
and then its data member is required to be NUL-terminated, but it is
better to be consistent to prevent future confusion.
Document the invariant in the struct msg_data definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Substantially the same code is present in http-push.c and imap-send.c,
so make a library function out of it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parenthesis are not matching in `builtin_remote_sethead_usage`
as a square bracket is closing something never opened.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we keep getting questions even when the user has properly
configured his full name and password:
Who should the emails appear to be from?
[Felipe Contreras <felipe.contreras@gmail.com>]
And once a question pops up, other questions are turned on. This is
annoying.
The reason it's safe to avoid this question is because currently the
script fails completely when the author (or committer) is not correct,
so we won't even be reaching this point in the code.
The scenarios, and the current situation:
1) No information at all, no fully qualified domain name
fatal: empty ident name (for <felipec@nysa.(none)>) not allowed
2) Only full name
fatal: unable to auto-detect email address (got 'felipec@nysa.(none)')
3) Full name + fqdm
Who should the emails appear to be from?
[Felipe Contreras <felipec@nysa.felipec.org>]
4) Full name + EMAIL
Who should the emails appear to be from?
[Felipe Contreras <felipe.contreras@gmail.com>]
5) User configured
6) GIT_COMMITTER
7) GIT_AUTHOR
All these are the same as 4)
After this patch:
1) 2) won't change: git send-email would still die
4) 5) 6) 7) will change: git send-email won't ask the user
This is good, that's what we would expect, because the identity is
explicit.
3) will change: git send-email won't ask the user
This is bad, because we will try with an address such as
'felipec@nysa.felipec.org', which is most likely not what the user
wants, but the user will get warned by default (confirm=auto), and if
not, most likely the sending won't work, which the user would readily
note and fix.
The worst possible scenario is that such mail address does work, and the
user sends an email from that address unintentionally, when in fact the
user expected to correct that address in the prompt. This is a very,
very, very unlikely scenario, with many dependencies:
1) No configured user.name/user.email
2) No specified $EMAIL
3) No configured sendemail.from
4) No specified --from argument
5) A fully qualified domain name
6) A full name in the geckos field
7) A sendmail configuration that allows sending from this domain name
8) confirm=never, or
8.1) confirm configuration not hitting, or
8.2) Getting the error, not being aware of it
9) The user expecting to correct this address in the prompt
In a more likely scenario where 7) is not the case (can't send from
nysa.felipec.org), the user will simply see the mail was not sent
properly, and fix the problem.
The much more likely scenario though, is where 5) is not the case
(nysa.(none)), and git send-email will fail right away like it does now.
So the likelihood of this affecting anybody seriously is very very slim,
and the chances of this affecting somebody slightly are still very
small. The vast majority, if not all, of git users won't be affected
negatively, and a lot will benefit from this.
Tests-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we treat "*.c" and "path/to/*.c" the same way. Which means
we check all possible paths in repo against "path/to/*.c". One could
see that "path/elsewhere/foo.c" obviously cannot match "path/to/*.c"
and we only need to check all paths _inside_ "path/to/" against that
pattern.
This patch checks the leading fixed part of a pathspec against base
directory and exit early if possible. We could even optimize further
in "path/to/something*.c" case (i.e. check the fixed part against
name_entry as well) but that's more complicated and probably does not
gain us much.
-O2 build on linux-2.6, without and with this patch respectively:
$ time git rev-list --quiet HEAD -- 'drivers/*.c'
real 1m9.484s
user 1m9.128s
sys 0m0.181s
$ time ~/w/git/git rev-list --quiet HEAD -- 'drivers/*.c'
real 0m15.710s
user 0m15.564s
sys 0m0.107s
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a pattern contains only a single asterisk as wildcard,
e.g. "foo*bar", after literally comparing the leading part "foo" with
the string, we can compare the tail of the string and make sure it
matches "bar", instead of running fnmatch() on "*bar" against the
remainder of the string.
-O2 build on linux-2.6, without the patch:
$ time git rev-list --quiet HEAD -- '*.c'
real 0m40.770s
user 0m40.290s
sys 0m0.256s
With the patch
$ time ~/w/git/git rev-list --quiet HEAD -- '*.c'
real 0m34.288s
user 0m33.997s
sys 0m0.205s
The above command is not supposed to be widely popular. It's chosen
because it exercises pathspec matching a lot. The point is it cuts
down matching time for popular patterns like *.c, which could be used
as pathspec in other places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
