Convert the declaration of struct sha1_stat. Adjust all usages of this
struct and replace hash{clr,cmp,cpy} with oid{clr,cmp,cpy} wherever
possible. Rename it to struct oid_stat.
Rename static function load_sha1_stat to load_oid_stat.
Remove macro EMPTY_BLOB_SHA1_BIN, as it's no longer used.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's start with how create a new directory cache after the last one
becomes invalid (e.g. because its dir mtime has changed...). In
open_cached_dir():
1. We start out with valid_cached_dir() returning false, which should
call invalidate_directory() to put a directory state back to
initial state, no untracked entries (untracked_nr zero), no sub
directory traversal (dirs[].recurse zero).
2. Since the cache cannot be used, we go the slow path opendir() and
go through items one by one via readdir(). All the directories on
disk will be added back to the cache (if not already exist in
dirs[]) and its flag "recurse" gets changed to one to note that
it's part of the cached dir travesal next time.
3. By the time we reach close_cached_dir() we should have a good
subdir list in dirs[]. Those with "recurse" flag set are the ones
present in the on-disk directory. The directory is now marked
"valid".
Next time read_directory() is called, since the directory is marked
valid, it will skip readdir(), go fast path and traverse through
dirs[] array instead.
Steps one and two need some tight cooperation. If a subdir is removed,
readdir() will not find it and of course we cannot examine/invalidate
it. To make sure removed directories on disk are gone from the cache,
step one must make sure recurse flag of all subdirs are zero.
But that's not true. If "valid" flag is already false, there is a
chance we go straight to the end of valid_cached_dir() without calling
invalidate_directory(). Or we fail to meet the "if (untracked-valid)"
condition and skip over the invalidate_directory().
After step 3, we mark the cache valid. Any stale subdir with incorrect
recurse flag becomes a real subdir next time we traverse the directory
using dirs[] array.
We could avoid this by making sure invalidate_directory() is always
called (therefore dirs[].recurse cleared) at the beginning of
open_cached_dir(). Which is what this patch does.
As to how we get into this situation, the key in the test is this
command
git checkout master
where "one/file" is replaced with "one" in the index. This index
update triggers untracked_cache_invalidate_path(), which clears valid
flag of the root directory while keeping "recurse" flag on the subdir
"one" on. On the next git-status, we go through steps 1-3 above and
save an incorrect cache on disk. The second git-status blindly follows
the bad cache data and shows the problem.
This is arguably because of a bad design where "recurse" flag plays
double roles: whether a directory should be saved on disk, and whether
it is part of a directory traversal.
We need to keep recurse flag set at "checkout master" because of the
first role: we need to keep subdir caches (dir "two" for example has
not been touched at all, no reason to throw its cache away).
As long as we make sure to ignore/reset "recurse" flag at the
beginning of a directory traversal, we're good. But maybe eventually
we should separate these two roles.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat() may follow a symlink and return stat data of the link's target
instead of the link itself. We are concerned about the link itself.
It's kind of hard to demonstrate the bug. I think when path->buf is a
symlink, we most likely find that its target's stat data does not
match our cached one, which means we ignore the cache and fall back to
slow path.
This is performance issue, not correctness (though we could still
catch it by verifying test-dump-untracked-cache. The less unlikely
case is, link target stat data matches the cached version and we
incorrectly go fast path, ignoring real data on disk. A test for this
may involve manipulating stat data, which may be not portable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
Refactor add_excludes() to separate the reading of the
exclude file into a buffer and the parsing of the buffer
into exclude_list items.
Add add_excludes_from_blob_to_list() to allow an exclude
file be specified with an OID without assuming a local
worktree or index exists.
Refactor read_skip_worktree_file_from_index() and add
do_read_blob() to eliminate duplication of preliminary
processing of blob contents.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
Teach status command to handle `--ignored=matching` with
`--untracked-files=normal`
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the status command more flexibility in how ignored files are
reported. Currently, the reporting of ignored files and untracked
files are linked. You cannot control how ignored files are reported
independently of how untracked files are reported (i.e. `all` vs
`normal`). This makes it impossible to show untracked files with the
`all` option, but show ignored files with the `normal` option.
This work 1) adds the ability to control the reporting of ignored
files independently of untracked files and 2) introduces the concept
of status reporting ignored paths that explicitly match an ignored
pattern. There are 2 benefits to these changes: 1) if a consumer needs
all untracked files but not all ignored files, there is a performance
benefit to not scanning all contents of an ignored directory and 2)
returning ignored files that explicitly match a path allow a consumer
to make more informed decisions about when a status result might be
stale.
This commit implements --ignored=matching with --untracked-files=all.
The following commit will implement --ignored=matching with
--untracked=files=normal.
As an example of where this flexibility could be useful is that our
application (Visual Studio) runs the status command and presents the
output. It shows all untracked files individually (e.g. using the
'--untracked-files==all' option), and would like to know about which
paths are ignored. It uses information about ignored paths to make
decisions about when the status result might have changed.
Additionally, many projects place build output into directories inside
a repository's working directory (e.g. in "bin/" and "obj/"
directories). Normal usage is to explicitly ignore these 2 directory
names in the .gitignore file (rather than or in addition to the *.obj
pattern).If an application could know that these directories are
explicitly ignored, it could infer that all contents are ignored as
well and make better informed decisions about files in these
directories. It could infer that any changes under these paths would
not affect the output of status. Additionally, there can be a
significant performance benefit by avoiding scanning through ignored
directories.
When status is set to report matching ignored files, it has the
following behavior. Ignored files and directories that explicitly
match an exclude pattern are reported. If an ignored directory matches
an exclude pattern, then the path of the directory is returned. If a
directory does not match an exclude pattern, but all of its contents
are ignored, then the contained files are reported instead of the
directory.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We meticulously pass the `exclude` flag to the `treat_directory()`
function so that we can indicate that files in it are excluded rather
than untracked when recursing.
But we did not yet treat submodules the same way.
Because of that, `git status --ignored --untracked` with a submodule
`submodule` in a gitignored `tracked/` would show the submodule in the
"Untracked files" section, e.g.
On branch master
Untracked files:
(use "git add <file>..." to include in what will be committed)
tracked/submodule/
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/initial.t
Instead, we would want it to show the submodule in the "Ignored files"
section:
On branch master
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the performance of the directory listing logic when it wants to list
non-empty ignored directories. In order to show non-empty ignored directories,
the existing logic will recursively iterate through all contents of an ignored
directory. This change introduces the optimization to stop iterating through
the contents once it finds the first file. This can have a significant
improvement in 'git status --ignored' performance in repositories with a large
number of files in ignored directories.
For an example of the performance difference on an example repository with
196,000 files in 400 ignored directories:
| Command | Time (s) |
| -------------------------- | --------- |
| git status | 1.2 |
| git status --ignored (old) | 3.9 |
| git status --ignored (new) | 1.4 |
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The untracked cache is stored on disk by concatenating its memory
structures without any padding. Consequently some of the structs are
not aligned at a particular boundary when the whole extension is read
back in one go. That's only OK on platforms without strict alignment
requirements, or for byte-aligned data like strings or hash values.
Decode struct ondisk_untracked_cache carefully from the extension
blob by using explicit pointer arithmetic with offsets, avoiding
alignment issues. Use char pointers for passing stat_data objects to
stat_data_from_disk(), and use memcpy(3) in that function to get the
contents into a properly aligned struct, then perform the byte-order
adjustment in place there.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Code clean-up.
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
Our code often opens a path to an optional file, to work on its
contents when we can successfully open it. We can ignore a failure
to open if such an optional file does not exist, but we do want to
report a failure in opening for other reasons (e.g. we got an I/O
error, or the file is there, but we lack the permission to open).
The exact errors we need to ignore are ENOENT (obviously) and
ENOTDIR (less obvious). Instead of repeating comparison of errno
with these two constants, introduce a helper function to do so.
* jc/noent-notdir:
treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked
compat-util: is_missing_file_error()
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
Similar functions exist in apply.c and builtin/show-branch.c for
counting the number of slashes in a string. Also in the later
patches, we introduce a third caller for the same. Hence, we unify
it now by cleaning the existing functions and declaring a common
function count_slashes in dir.h and implementing it in dir.c to
remove this code duplication.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
Using the is_missing_file_error() helper introduced in the previous
step, update all hits from
$ git grep -e ENOENT --and -e ENOTDIR
There are codepaths that only check ENOENT, and it is possible that
some of them should be checking both. Updating them is kept out of
this step deliberately, as we do not want to change behaviour in this
step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places, Git warns about an inaccessible file after a fopen()
failed. To discern these cases from other cases where we want to warn
about inaccessible files, introduce a new helper specifically to test
whether fopen() failed because the current user lacks the permission to
open file in question.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use cmp_name() and check_contains() (which both compare
`struct dir_entry`s, the former in terms of the sort order, the latter
in terms of whether one lexically contains another) outside of dir.c,
so we have to (1) change their linkage and (2) rename them as
appropriate for the global namespace. The second is achieved by
renaming cmp_name() to cmp_dir_entry() and check_contains() to
check_dir_entry_contains().
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We consider directories containing only untracked and ignored files to
be themselves untracked, which in the usual case means we don't have to
search these directories. This is problematic when we want to collect
ignored files with DIR_SHOW_IGNORED_TOO, though, so we teach
read_directory_recursive() to recurse into untracked directories to find
the ignored files they contain when DIR_SHOW_IGNORED_TOO is set. This
has the side effect of also collecting all untracked files in untracked
directories as well.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make it clearer where the_index is being referenced, stop
using the index compatibility macros in dir.c. This is to make it
easier to identify the functions which need to be convert to taking in a
'struct index_state' as a parameter.
The end goal would be to eliminate the need to reference global index
state in dir.c.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
The pathspec mechanism learned to further limit the paths that
match the pattern to those that have specified attributes attached
via the gitattributes mechanism.
* bw/attr-pathspec:
pathspec: allow escaped query values
pathspec: allow querying for attributes
In a later patch we'll use connect_work_tree_and_git_dir when the
directory for the gitlink file doesn't exist yet. This patch makes
connect_work_tree_and_git_dir safe to use for both cases of
either the git dir or the working dir missing.
To do so, we need to call safe_create_leading_directories[_const]
on both directories. However this has to happen before we construct
the absolute paths as real_pathdup assumes the directories to
be there already.
So for both the config file in the git dir as well as the .git link
file we need to
a) construct the name
b) call SCLD
c) get the absolute path
d) once a-c is done for both we can consume the absolute path
to compute the relative path to each other and store those
relative paths.
The implementation provided here puts a) and b) for both cases first,
and then performs c and d after.
One of the two users of 'connect_work_tree_and_git_dir' already checked
for the directory being there, so we can loose that check as
connect_work_tree_and_git_dir handles this functionality now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the match member of the first pathspec item directly to
read_directory() instead of using common_prefix() to duplicate it first,
thus avoiding memory duplication, strlen(3) and free(3).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of "real_path()" was to go there with chdir(2)
and call getcwd(3), but this obviously wouldn't be usable in a
threaded environment. Rewrite it to manually resolve relative
paths including symbolic links in path components.
* bw/realpath-wo-chdir:
real_path: set errno when max number of symlinks is exceeded
real_path: prevent redefinition of MAXSYMLINKS
Code clean-up in the pathspec API.
* bw/pathspec-cleanup:
pathspec: rename prefix_pathspec to init_pathspec_item
pathspec: small readability changes
pathspec: create strip submodule slash helpers
pathspec: create parse_element_magic helper
pathspec: create parse_long_magic function
pathspec: create parse_short_magic function
pathspec: factor global magic into its own function
pathspec: simpler logic to prefix original pathspec elements
pathspec: always show mnemonic and name in unsupported_magic
pathspec: remove unused variable from unsupported_magic
pathspec: copy and free owned memory
pathspec: remove the deprecated get_pathspec function
ls-tree: convert show_recursive to use the pathspec struct interface
dir: convert fill_directory to use the pathspec struct interface
dir: remove struct path_simplify
mv: remove use of deprecated 'get_pathspec()'
Convert 'fill_directory()' to use the pathspec struct interface from
using the '_raw' entry in the pathspec struct.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach simplify_away() and exclude_matches_pathspec() to handle struct
pathspec directly, eliminating the need for the struct path_simplify.
Also renamed the len parameter to pathlen in exclude_matches_pathspec()
to match the parameter names used in simplify_away().
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule has its git dir inside the working dir, the submodule
support for checkout that we plan to add in a later patch will fail.
Add functionality to migrate the git directory to be absorbed
into the superprojects git directory.
The newly added code in this patch is structured such that other areas of
Git can also make use of it. The code in the submodule--helper is a mere
wrapper and option parser for the function
`absorb_git_dir_into_superproject`, that takes care of embedding the
submodules git directory into the superprojects git dir. That function
makes use of the more abstract function for this use case
`relocate_gitdir`, which can be used by e.g. the worktree code eventually
to move around a git directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That function was primarily used by submodule code, but the function
itself is not inherently about submodules. In the next patch we'll
introduce relocate_git_dir, which can be used by worktrees as well,
so find a neutral middle ground in dir.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level attribute and gitignore code will try to look
in $GIT_DIR/info for any repo-level configuration files,
even if we have not actually determined that we are in a
repository (e.g., running "git grep --no-index"). In such a
case they end up looking for ".git/info/attributes", etc.
This is generally harmless, as such a file is unlikely to
exist outside of a repository, but it's still conceptually
the wrong thing to do.
Let's detect this situation explicitly and skip reading the
file (i.e., the same behavior we'd get if we were in a
repository and the file did not exist).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files" learned "--recurse-submodules" option that can be
used to get a listing of tracked files across submodules (i.e. this
only works with "--cached" option, not for listing untracked or
ignored files). This would be a useful tool to sit on the upstream
side of a pipe that is read with xargs to work on all working tree
files from the top-level superproject.
* bw/ls-files-recurse-submodules:
ls-files: add pathspec matching for submodules
ls-files: pass through safe options for --recurse-submodules
ls-files: optionally recurse into submodules
git: make super-prefix option
Pathspecs can be a bit tricky when trying to apply them to submodules.
The main challenge is that the pathspecs will be with respect to the
superproject and not with respect to paths in the submodule. The
approach this patch takes is to pass in the identical pathspec from the
superproject to the submodule in addition to the submodule-prefix, which
is the path from the root of the superproject to the submodule, and then
we can compare an entry in the submodule prepended with the
submodule-prefix to the pathspec in order to determine if there is a
match.
This patch also permits the pathspec logic to perform a prefix match against
submodules since a pathspec could refer to a file inside of a submodule.
Due to limitations in the wildmatch logic, a prefix match is only done
literally. If any wildcard character is encountered we'll simply punt
and produce a false positive match. More accurate matching will be done
once inside the submodule. This is due to the superproject not knowing
what files could exist in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* rs/use-strbuf-addbuf:
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
use strbuf_addbuf() for appending a strbuf to another
Use strbuf_addbuf() where possible; it's shorter and more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
These functions compare two paths that are taken from file system.
Depending on the running file system, paths may need to be compared
case-sensitively or not, and maybe even something else in future. The
current names do not convey that well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was largely replaced by fnmatch_icase_mem() and its last use was in
84b8b5d (remove match_pathspec() in favor of match_pathspec_depth() -
2013-07-14).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values defined by the macro EXC_FLAG_* (1, 4, 8, 16) are stored
in fields of the structs "pattern" and "exclude", some functions
arguments and a local variable. None of these uses its most
significant bit in any special way and there is no good reason to
use a signed integer for them.
And while we're at it, document "flags" of "exclude" to explicitly
state the values it's supposed to take on.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
We perform unchecked additions when computing the size of a
"struct ondisk_untracked_cache". This is unlikely to have an
integer overflow in practice, but we'd like to avoid this
dangerous pattern to make further audits easier.
Note that there's one subtlety here, though. We protect
ourselves against a NULL exclude_per_dir entry in our
source, and avoid calling strlen() on it, keeping "len" at
0. But later, we unconditionally memcpy "len + 1" bytes to
get the trailing NUL byte. If we did have a NULL
exclude_per_dir, we would read from bogus memory.
As it turns out, though, we always create this field
pointing to a string literal, so there's no bug. We can just
get rid of the pointless extra conditional.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using FLEX_ARRAY macros reduces the amount of manual
computation size we have to do. It also ensures we don't
overflow size_t, and it makes sure we write the same number
of bytes that we allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given path "a" and the pattern "a", it's matched. But if we throw path
"a/b" to pattern "a", the code fails to realize that if "a" matches
"a" then "a/b" should also be matched.
When the pattern is matched the first time, we can mark it "sticky", so
that all files and dirs inside the matched path also matches. This is a
simpler solution than modify all match scenarios to fix that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given the pattern "1/2/3/4" and the path "1/2/3/4/f", the pattern
prefix is "1/2/3/4". We will compare and remove the prefix from both
pattern and path and come to this code
/*
* If the whole pattern did not have a wildcard,
* then our prefix match is all we need; we
* do not need to call fnmatch at all.
*/
if (!patternlen && !namelen)
return 1;
where patternlen is zero (full pattern consumed) and the remaining
path in "name" is "/f". We fail to realize it's matched in this case
and fall back to fnmatch(), which also fails to catch it. Fix it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The "exclude_list" structure has the usual "alloc, nr" pair of
fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot
to reset 'alloc' to 0 when it cleared 'nr' to discard the managed
array.
* nd/dir-exclude-cleanup:
dir.c: clean the entire struct in clear_exclude_list()
It is not a good idea to compare kernel versions and disable
the untracked cache if it changes, as people may upgrade and
still want the untracked cache to work. So let's just
compare work tree locations and kernel name to decide if we
should disable it.
Also storing many locations in the ident field and comparing
to any of them can be dangerous if GIT_WORK_TREE is used with
different values. So let's just store one location, the
location of the current work tree.
The downside is that untracked cache can only be used by one
type of OS for now. Exporting a git repo to different clients
via a network to e.g. Linux and Windows means that only one
can use the untracked cache.
If the location changed in the ident field and we still want
an untracked cache, let's delete the cache and recreate it.
Note that if an untracked cache has been created by a
previous Git version, then the kernel version is stored in
the ident field. As we now compare with just the kernel
name the comparison will fail and the untracked cache will
be disabled until it's recreated.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out code into remove_untracked_cache(), which will be used
in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out code into new_untracked_cache() and
add_untracked_cache(), which will be used
in later commits.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The "exclude_list" structure has the usual "alloc, nr" pair of
fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot
to reset 'alloc' to 0 when it cleared 'nr'to discard the managed
array.
* nd/dir-exclude-cleanup:
dir.c: clean the entire struct in clear_exclude_list()
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure "el" can be reuseable again. The problem was el->alloc is
not cleared and may cause segfaults next time because add_exclude()
thinks el->excludes (being NULL) has enough space. Just clear the
entire struct to be safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name-hash subsystem that is used to cope with case insensitive
filesystems keeps track of directories and their on-filesystem
cases for all the paths in the index by holding a pointer to a
randomly chosen cache entry that is inside the directory (for its
ce->ce_name component). This pointer was not updated even when the
cache entry was removed from the index, leading to use after free.
This was fixed by recording the path for each directory instead of
borrowing cache entries and restructuring the API somewhat.
* dt/name-hash-dir-entry-fix:
name-hash: don't reuse cache_entry in dir_entry
The name-hash subsystem that is used to cope with case insensitive
filesystems keeps track of directories and their on-filesystem
cases for all the paths in the index by holding a pointer to a
randomly chosen cache entry that is inside the directory (for its
ce->ce_name component). This pointer was not updated even when the
cache entry was removed from the index, leading to use after free.
This was fixed by recording the path for each directory instead of
borrowing cache entries and restructuring the API somewhat.
* dt/name-hash-dir-entry-fix:
name-hash: don't reuse cache_entry in dir_entry
Stop reusing cache_entry in dir_entry; doing so causes a
use-after-free bug.
During merges, we free entries that we no longer need in the
destination index. But those entries might have also been stored in
the dir_entry cache, and when a later call to add_to_index found them,
they would be used after being freed.
To prevent this, change dir_entry to store a copy of the name instead
of a pointer to a cache_entry. This entails some refactoring of code
that expects the cache_entry.
Keith McGuigan <kmcguigan@twitter.com> diagnosed this bug and wrote
the initial patch, but this version does not use any of Keith's code.
Helped-by: Keith McGuigan <kmcguigan@twitter.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
On a case insensitive filesystems, setting GIT_WORK_TREE variable
using a random cases that does not agree with what the filesystem
thinks confused Git that it wasn't inside the working tree.
* js/icase-wt-detection:
setup: fix "inside work tree" detection on case-insensitive filesystems
On a case insensitive filesystems, setting GIT_WORK_TREE variable
using a random cases that does not agree with what the filesystem
thinks confused Git that it wasn't inside the working tree.
* js/icase-wt-detection:
setup: fix "inside work tree" detection on case-insensitive filesystems
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
When working with paths in strbufs, we frequently want to
ensure that a directory contains a trailing slash before
appending to it. We can shorten this code (and make the
intent more obvious) by calling strbuf_complete.
Most of these cases are trivially identical conversions, but
there are two things to note:
- in a few cases we did not check that the strbuf is
non-empty (which would lead to an out-of-bounds memory
access). These were generally not triggerable in
practice, either from earlier assertions, or typically
because we would have just fed the strbuf to opendir(),
which would choke on an empty path.
- in a few cases we indexed the buffer with "original_len"
or similar, rather than the current sb->len, and it is
not immediately obvious from the diff that they are the
same. In all of these cases, I manually verified that
the strbuf does not change between the assignment and
the strbuf_complete call.
This does not convert cases which look like:
if (sb->len && !is_dir_sep(sb->buf[sb->len - 1]))
strbuf_addch(sb, '/');
as those are obviously semantically different. Some of these
cases arguably should be doing that, but that is out of
scope for this change, which aims purely for cleanup with no
behavior change (and at least it will make such sites easier
to find and examine in the future, as we can grep for
strbuf_complete).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has a config variable to indicate that it is operating on a file
system that is case-insensitive: core.ignoreCase. But the
`dir_inside_of()` function did not respect that. As a result, if Git's
idea of the current working directory disagreed in its upper/lower case
with the `GIT_WORK_TREE` variable (e.g. `C:\test` vs `c:\test`) the
user would be greeted by the error message
fatal: git-am cannot be used without a working tree.
when trying to run a rebase.
This fixes https://github.com/git-for-windows/git/issues/402 (reported by
Daniel Harding).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".
In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.
Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch adds some post processing to the result value before it's
returned to the caller. Keep all branches reach the end of the function,
so we can do it all in one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental untracked-cache feature were buggy when paths with
a few levels of subdirectories are involved.
* dt/untracked-subdir:
untracked cache: fix entry invalidation
untracked-cache: fix subdirectory handling
t7063: use --force-untracked-cache to speed up a bit
untracked-cache: support sparse checkout
The experimental untracked-cache feature were buggy when paths with
a few levels of subdirectories are involved.
* dt/untracked-subdir:
untracked cache: fix entry invalidation
untracked-cache: fix subdirectory handling
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
An experimental "untracked cache" feature used uname(2) in a
slightly unportable way.
* cb/uname-in-untracked:
untracked: fix detection of uname(2) failure
First, the current code in untracked_cache_invalidate_path() is wrong
because it can only handle paths "a" or "a/b", not "a/b/c" because
lookup_untracked() only looks for entries directly under the given
directory. In the last case, it will look for the entry "b/c" in
directory "a" instead. This means if you delete or add an entry in a
subdirectory, untracked cache may become out of date because it does not
invalidate properly. This is noticed by David Turner.
The second problem is about invalidation inside a fully untracked/excluded
directory. In this case we may have to invalidate back to root. See the
comment block for detail.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, some calls lookup_untracked would pass a full path. But
lookup_untracked assumes that the portion of the path up to and
including to the untracked_cache_dir has been removed. So
lookup_untracked would be looking in the untracked_cache for 'foo' for
'foo/bar' (instead of just looking for 'bar'). This would cause
untracked cache corruption.
Instead, treat_directory learns to track the base length of the parent
directory, so that only the last path component is passed to
lookup_untracked.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow untracked cache (experimental) to be used when sparse
checkout (experimental) is also in use.
* dt/untracked-sparse:
untracked-cache: support sparse checkout
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An experimental "untracked cache" feature used uname(2) in a
slightly unportable way.
* cb/uname-in-untracked:
untracked: fix detection of uname(2) failure
Remove a check that would disable the untracked cache for sparse
checkouts. Add tests that ensure that the untracked cache works with
sparse checkouts -- specifically considering the case that a file
foo/bar is checked out, but foo/.gitignore is not.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to POSIX specification uname(2) must return -1 on failure
and a non-negative value on success. Although many implementations
do return 0 on success it is valid to return any positive value for
success. In particular, Solaris returns 1.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
Since only the xdg excludes file path is required, simplify the code by
replacing use of home_config_paths() with xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
$GIT_DIR/info/exclude and core.excludesfile (which falls back to
$XDG_HOME/git/ignore) are both ways to override the ignore pattern
lists given by the project in .gitignore files. The former, which
is per-repository personal preference, should take precedence over
the latter, which is a personal preference default across different
repositories that are accessed from that machine. The existing
documentation also agrees.
However, the precedence order was screwed up between these two from
the very beginning when 896bdfa2 (add: Support specifying an
excludes file with a configuration variable, 2007-02-27) introduced
core.excludesfile variable.
Noticed-by: Yohei Endo <yoheie@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent change to ignore the UTF8 BOM at the beginning of
.gitignore files, we now have two codepaths that do such a skipping
(the other one is for reading the configuration files).
Introduce utf8_bom[] constant string and skip_utf8_bom() helper
and teach .gitignore code how to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the previous step shifts where the "entry" begins, we
still iterate over the original buf[], which may begin with the
UTF-8 BOM we are supposed to be skipping. At the end of the first
line, the code grabs the contents of it starting at "entry", so
there is nothing wrong per-se, but the logic looks really confused.
Instead, move the buf pointer and shrink its size, to truly
pretend that UTF-8 BOM did not exist in the input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some text editors like Notepad or LibreOffice write an UTF-8 BOM in
order to indicate that the file is Unicode text rather than whatever the
current locale would indicate.
If someone uses such an editor to edit a gitignore file, we are left
with those three bytes at the beginning of the file. If we do not skip
them, we will attempt to match a filename with the BOM as prefix, which
won't match the files the user is expecting.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user enables untracked cache, then
- move worktree to an unsupported filesystem
- or simply upgrade OS
- or move the whole (portable) disk from one machine to another
- or access a shared fs from another machine
there's no guarantee that untracked cache can still function properly.
Record the worktree location and OS footprint in the cache. If it
changes, err on the safe side and disable the cache. The user can
'update-index --untracked-cache' again to make sure all conditions are
met.
This adds a new requirement that setup_git_directory* must be called
before read_cache() because we need worktree location by then, or the
cache is dropped.
This change does not cover all bases, you can fool it if you try
hard. The point is to stop accidents.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to double check if results with untracked cache are
correctly, compared to vanilla version. Untracked cache remains in
index, but not used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be used to verify correct behavior in tests
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory is updated within the same second that its timestamp
is last saved, we cannot realize the directory has been updated by
checking timestamps. Assume the worst (something is update). See
29e4d36 (Racy GIT - 2005-12-20) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we should implement untracked_cache_remove_from_index() and
untracked_cache_add_to_index() so that they update untracked cache
right away instead of invalidating it and wait for read_directory()
next time to deal with it. But that may need some more work in
unpack-trees.c. So stay simple as the first step.
The new call in add_index_entry_with_check() may look strange because
new calls usually stay close to cache_tree_invalidate_path(). We do it
a bit later than c_t_i_p() in this function because if it's about
replacing the entry with the same name, we don't care (but cache-tree
does).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This cuts down a signficant number of open(.gitignore) because most
directories usually don't have .gitignore files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we redo this thing in a functional style, we would have one struct
untracked_dir as input tree and another as output. The input is used
for verification. The output is a brand new tree, reflecting current
worktree.
But that means recreate a lot of dir nodes even if a lot could be
shared between input and output trees in good cases. So we go with the
messy but efficient way, combining both input and output trees into
one. We need a way to know which node in this combined tree belongs to
the output. This is the purpose of this "recurse" flag.
"valid" bit can't be used for this because it's about data of the node
except the subdirs. When we invalidate a directory, we want to keep
cached data of the subdirs intact even though we don't really know
what subdir still exists (yet). Then we check worktree to see what
actual subdir remains on disk. Those will have 'recurse' bit set
again. If cached data for those are still valid, we may be able to
avoid computing exclude files for them. Those subdirs that are deleted
will have 'recurse' remained clear and their 'valid' bits do not
matter.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main readdir loop in read_directory_recursive() is replaced with a
new one that checks if cached results of a directory is still valid.
If a file is added or removed from the index, the containing directory
is invalidated (but not its subdirs). If directory's mtime is changed,
the same happens. If a .gitignore is updated, the containing directory
and all subdirs are invalidated recursively. If dir_struct#flags or
other conditions change, the cache is ignored.
If a directory is invalidated, we opendir/readdir/closedir and run the
exclude machinery on that directory listing as usual. If untracked
cache is also enabled, we'll update the cache along the way. If a
directory is validated, we simply pull the untracked listing out from
the cache. The cache also records the list of direct subdirs that we
have to recurse in. Fully excluded directories are seen as "untracked
files".
In the best case when no dirs are invalidated, read_directory()
becomes a series of
stat(dir), open(.gitignore), fstat(), read(), close() and optionally
hash_sha1_file()
For comparison, standard read_directory() is a sequence of
opendir(), readdir(), open(.gitignore), fstat(), read(), close(), the
expensive last_exclude_matching() and closedir().
We already try not to open(.gitignore) if we know it does not exist,
so open/fstat/read/close sequence does not apply to every
directory. The sequence could be reduced further, as noted in
prep_exclude() in another patch. So in theory, the entire best-case
read_directory sequence could be reduced to a series of stat() and
nothing else.
This is not a silver bullet approach. When you compile a C file, for
example, the old .o file is removed and a new one with the same name
created, effectively invalidating the containing directory's cache
(but not its subdirectories). If your build process touches every
directory, this cache adds extra overhead for nothing, so it's a good
idea to separate generated files from tracked files.. Editors may use
the same strategy for saving files. And of course you're out of luck
running your repo on an unsupported filesystem and/or operating system.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to feed different info to read_directory_recursive()
based on untracked cache in the next patch.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to see that if an existing .gitignore changes, its SHA-1
would be different and invalidate_gitignore() is called.
If .gitignore is removed, add_excludes() will treat it like an empty
.gitignore, which again should invalidate the cached directory data.
if .gitignore is added, lookup_untracked() already fills initial
.gitignore SHA-1 as "empty file", so again invalidate_gitignore() is
called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the starting conditions and all global exclude files are
good to go. If not, either disable untracked cache completely, or wipe
out the cache and start fresh.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea is if we can capture all input and (non-rescursive) output of
read_directory_recursive(), and can verify later that all the input is
the same, then the second r_d_r() should produce the same output as in
the first run.
The requirement for this to work is stat info of a directory MUST
change if an entry is added to or removed from that directory (and
should not change often otherwise). If your OS and filesystem do not
meet this requirement, untracked cache is not for you. Most file
systems on *nix should be fine. On Windows, NTFS is fine while FAT may
not be [1] even though FAT on Linux seems to be fine.
The list of input of r_d_r() is in the big comment block in dir.h. In
short, the output of a directory (not counting subdirs) mainly depends
on stat info of the directory in question, all .gitignore leading to
it and the check_only flag when r_d_r() is called recursively. This
patch records all this info (and the output) as r_d_r() runs.
Two hash_sha1_file() are required for $GIT_DIR/info/exclude and
core.excludesfile unless their stat data matches. hash_sha1_file() is
only needed when .gitignore files in the worktree are modified,
otherwise their SHA-1 in index is used (see the previous patch).
We could store stat data for .gitignore files so we don't have to
rehash them if their content is different from index, but I think
.gitignore files are rarely modified, so not worth extra cache data
(and hashing penalty read-cache.c:verify_hdr(), as we will be storing
this as an index extension).
The implication is, if you change .gitignore, you better add it to the
index soon or you lose all the benefit of untracked cache because a
modified .gitignore invalidates all subdirs recursively. This is
especially bad for .gitignore at root.
This cached output is about untracked files only, not ignored files
because the number of tracked files is usually small, so small cache
overhead, while the number of ignored files could go really high
(e.g. *.o files mixing with source code).
[1] "Description of NTFS date and time stamps for files and folders"
http://support.microsoft.com/kb/299648
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not used anywhere yet. But the goal is to compare quickly if a
.gitignore file has changed when we have the SHA-1 of both old (cached
somewhere) and new (from index or a tree) versions.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "stk" shadows the first declaration at the top. There's currently
no bad effect. But let's avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segfault in git-status with long paths on Windows,
where PATH_MAX is only 260.
This also fixes the problem of silently ignoring .gitignore if the
full path exceeds PATH_MAX. Now add_excludes_from_file() will report
if it gets ENAMETOOLONG.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it calls a static inline function, it cannot be an inline
definition with external linkage. Remove inline and make it an
external definition.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we do support matching pathspec "foo/" against directory
"foo". That is because match_pathspec() has no way to tell "foo" is a
directory and matching "foo/" against _file_ "foo" is wrong.
The callers can now tell match_pathspec if "foo" is a directory, we
could make an exception for this case. Code is not executed though
because no callers pass the flag yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
If a file or directory that we are trying to remove disappears (e.g.,
because another process has pruned it), do not consider it an error.
However, if REMOVE_DIR_KEEP_TOPLEVEL is set, and the toplevel
directory is missing, then consider it an error (like before).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If opendir() fails on the top-level directory, it makes sense to try
to delete it anyway--but only if the failure was due to EACCES.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
directory_exists_in_index_icase() dangerously assumed that it could
access one character beyond the end of its directory argument, and that
that character would unconditionally be '/'. 2eac2a4c (ls-files -k: a
directory only can be killed if the index has a non-directory,
2013-08-15) added a caller which did not respect this undocumented
assumption, and 680be044 (dir.c::test_one_path(): work around
directory_exists_in_index_icase() breakage, 2013-08-23) added a
work-around which temporarily appends a '/' before invoking
directory_exists_in_index_icase().
Since the dangerous behavior of directory_exists_in_index_icase() has
been eliminated, the work-around is now redundant, so retire it (but not
the tests added by the same commit).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 5102c617 (Add case insensitivity support for directories when using
git status, 2010-10-03) added directories to the name-hash there was
only a single hash table in which both real cache entries and leading
directory prefixes were registered. To distinguish between the two types
of entries, directories were stored with a trailing '/'.
2092678c (name-hash.c: fix endless loop with core.ignorecase=true,
2013-02-28), however, moved directories to a separate hash table
(index_state.dir_hash) but retained the (now) redundant trailing '/',
thus callers continue to bear the burden of ensuring the slash's
presence before searching the index for a directory. Eliminate this
redundancy by storing paths in the dir-hash without the trailing '/'.
An important benefit of this change is that it eliminates undocumented
and dangerous behavior of dir.c:directory_exists_in_index_icase() in
which it assumes not only that it can validly access one character
beyond the end of its incoming directory argument, but also that that
character will unconditionally be a '/'. This perilous behavior was
"tolerated" because the string passed in by its lone caller always had a
'/' in that position, however, things broke [1] when 2eac2a4c (ls-files
-k: a directory only can be killed if the index has a non-directory,
2013-08-15) added a new caller which failed to respect the undocumented
assumption.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/232727
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each caller of index_name_exists() knows whether it is looking for a
directory or a file, and can avoid the unnecessary indirection of
index_name_exists() by instead calling index_dir_exists() or
index_file_exists() directly.
Invoking the appropriate search function explicitly will allow a
subsequent patch to relieve callers of the artificial burden of having
to add a trailing '/' to the pathname given to index_dir_exists().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
directory_exists_in_index() takes pathname and its length, but its
helper function directory_exists_in_index_icase() reads one byte
beyond the end of the pathname and expects there to be a '/'.
This needs to be fixed, as that one-byte-beyond-the-end location may
not even be readable, possibly by not registering directories to
name hashes with trailing slashes. In the meantime, update the new
caller added recently to treat_one_path() to make sure that the path
buffer it gives the function is one byte longer than the path it is
asking the function about by appending a slash to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These codepaths always start from the_index and use index_*
functions, but there is no reason to do so. Use the compatibility
cache_* macro to access the current in-core index like everybody
else.
While at it, fix typo in the comment for a function to check if a
path within a directory appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is essentially no-op. It helps catching new use of this
field though. This field is introduced as an intermediate step for the
pathspec conversion and will be removed eventually. At this stage no
more access sites should be introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code now takes advantage of nowildcard_len field.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GUARD_PATHSPEC() marks pathspec-sensitive code, basically all those
that touch anything in 'struct pathspec' except fields "nr" and
"original". GUARD_PATHSPEC() is not supposed to fail. It's mainly to
help the designers catch unsupported codepaths.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth() and tree_entry_interesting() check max_depth
field in order to support "git grep --max-depth". The feature
activation is tied to "recursive" field, which led to some unwanted
activation, e.g. 5c8eeb8 (diff-index: enable recursive pathspec
matching in unpack_trees - 2012-01-15).
This patch decouples the activation from "recursive" field, puts it in
"magic" field instead. This makes sure that only "git grep" can
activate this feature. And because parse_pathspec knows when the
feature is not used, it does not need to sort pathspec (required for
max_depth to work correctly). A small win for non-grep cases.
Even though a new magic flag is introduced, no magic syntax is. The
magic can be only enabled by parse_pathspec() caller. We might someday
want to support ":(maxdepth:10)src." It all depends on actual use
cases.
max_depth feature cannot be enabled via init_pathspec() anymore. But
that's ok because init_pathspec() is on its way to /dev/null.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually use pathspec_item's match field for pathspec error
reporting. However "match" (or "raw") does not show the magic part,
which will play more important role later on. Preserve exact user
input for reporting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently to fill a struct pathspec, we do:
const char **paths;
paths = get_pathspec(prefix, argv);
...
init_pathspec(&pathspec, paths);
"paths" can only carry bare strings, which loses information from
command line arguments such as pathspec magic or the prefix part's
length for each argument.
parse_pathspec() is introduced to combine the two calls into one. The
plan is gradually replace all get_pathspec() and init_pathspec() with
parse_pathspec(). get_pathspec() now becomes a thin wrapper of
parse_pathspec().
parse_pathspec() allows the caller to reject the pathspec magics that
it does not support. When a new pathspec magic is introduced, we can
enable it per command after making sure that all underlying code has no
problem with the new magic.
"flags" parameter is currently unused. But it would allow callers to
pass certain instructions to parse_pathspec, for example forcing
literal pathspec when no magic is used.
With the introduction of parse_pathspec, there are now two functions
that can initialize struct pathspec: init_pathspec and
parse_pathspec. Any semantic changes in struct pathspec must be
reflected in both functions. init_pathspec() will be phased out in
favor of parse_pathspec().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the working tree walker encounters a directory, it asks the
function treat_directory() if it should descend into it, show it as
an untracked directory, or do something else. When the directory is
the top of the submodule working tree, we used to say "That is an
untracked directory", which was bogus.
It is an entity that is tracked in the index of the repository we
are looking at, and that is not to be descended into it. Return
path_none, not path_untracked, to report that.
The existing case that path_untracked is returned for a newly
discovered submodule that is not tracked in the index (this only
happens when DIR_NO_GITLINKS option is not used) is unchanged, but
that is exactly because the submodule is not tracked in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of 95c6f271 "dir.c: unify is_excluded and is_path_excluded APIs", the
is_excluded API no longer recurses into directories that match an ignore
pattern, and returns the directory's ignored state for all contained paths.
This is OK for normal ignore patterns, i.e. ignoring a directory affects
the entire contents recursively.
Unfortunately, this also "works" for negated ignore patterns ('!dir'), i.e.
the entire contents is "not-ignored" recursively, regardless of ignore
patterns that match the contents directly.
In prep_exclude, skip recursing into a directory only if it is really
ignored (i.e. the ignore pattern is not negated).
Signed-off-by: Karsten Blees <blees@dcon.de>
Tested-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $HOME is misconfigured to point at an unreadable directory, we
used to complain and die. This loosens the check.
* jn/config-ignore-inaccessible:
config: allow inaccessible configuration under $HOME
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' recursively scans directories up to three times:
1. To collect untracked files.
2. To collect ignored files.
3. When collecting ignored files, to check that an untracked directory
that potentially contains ignored files doesn't also contain untracked
files (i.e. isn't already listed as untracked).
Let's get rid of case 3 first.
Currently, read_directory_recursive returns a boolean whether a directory
contains the requested files or not (actually, it returns the number of
files, but no caller actually needs that), and DIR_SHOW_IGNORED specifies
what we're looking for.
To be able to test for both untracked and ignored files in a single scan,
we need to return a bit more info, and the result must be independent of
the DIR_SHOW_IGNORED flag.
Reuse the path_treatment enum as return value of read_directory_recursive.
Split path_handled in two separate values path_excluded and path_untracked
that don't change their meaning with the DIR_SHOW_IGNORED flag. We don't
need an extra value path_untracked_and_excluded, as directories with both
untracked and ignored files should be listed as untracked.
Rename path_ignored to path_none for clarity (i.e. "don't treat that path"
in contrast to "the path is ignored and should be treated according to
DIR_SHOW_IGNORED").
Replace enum directory_treatment with path_treatment. That's just another
enum with the same meaning, no need to translate back and forth.
In treat_directory, get rid of the extra read_directory_recursive call and
all the DIR_SHOW_IGNORED-specific code.
In read_directory_recursive, decide whether to dir_add_name path_excluded
or path_untracked paths based on the DIR_SHOW_IGNORED flag.
The return value of read_directory_recursive is the maximum path_treatment
of all files and sub-directories. In the check_only case, abort when we've
reached the most significant value (path_untracked).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking if a file is in the index is much faster (hashtable lookup) than
checking if the file is excluded (linear search over exclude patterns).
Skip is_excluded checks for files: move the cache_name_exists check from
treat_file to treat_one_path and return early if the file is tracked.
This can safely be done as all other code paths also return path_ignored
for tracked files, and dir_add_ignored skips tracked files as well.
There's just one line left in treat_file, so move this to treat_one_path
as well.
Here's some performance data for git-status from the linux and WebKit
repos (best of 10 runs on a Debian Linux on SSD, core.preloadIndex=true):
| status | status --ignored
| linux | WebKit | linux | WebKit
-------+-------+--------+-------+---------
before | 0.218 | 1.583 | 0.321 | 2.579
after | 0.156 | 0.988 | 0.202 | 1.279
gain | 1.397 | 1.602 | 1.589 | 2.016
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_excluded and is_path_excluded APIs are very similar, except for a
few noteworthy differences:
is_excluded doesn't handle ignored directories, results for paths within
ignored directories are incorrect. This is probably based on the premise
that recursive directory scans should stop at ignored directories, which
is no longer true (in certain cases, read_directory_recursive currently
calls is_excluded *and* is_path_excluded to get correct ignored state).
is_excluded caches parsed .gitignore files of the last directory in struct
dir_struct. If the directory changes, it finds a common parent directory
and is very careful to drop only as much state as necessary. On the other
hand, is_excluded will also read and parse .gitignore files in already
ignored directories, which are completely irrelevant.
is_path_excluded correctly handles ignored directories by checking if any
component in the path is excluded. As it uses is_excluded internally, this
unfortunately forces is_excluded to drop and re-read all .gitignore files,
as there is no common parent directory for the root dir.
is_path_excluded tracks state in a separate struct path_exclude_check,
which is essentially a wrapper of dir_struct with two more fields. However,
as is_path_excluded also modifies dir_struct, it is not possible to e.g.
use multiple path_exclude_check structures with the same dir_struct in
parallel. The additional structure just unnecessarily complicates the API.
Teach is_excluded / prep_exclude about ignored directories: whenever
entering a new directory, first check if the entire directory is excluded.
Remember the excluded state in dir_struct. Don't traverse into already
ignored directories (i.e. don't read irrelevant .gitignore files).
Directories could also be excluded by exclude patterns specified on the
command line or .git/info/exclude, so we cannot simply skip prep_exclude
entirely if there's no .gitignore file name (dir_struct.exclude_per_dir).
Move this check to just before actually reading the file.
is_path_excluded is now equivalent to is_excluded, so we can simply
redirect to it (the public API is cleaned up in the next patch).
The performance impact of the additional ignored check per directory is
hardly noticeable when reading directories recursively (e.g. 'git status').
However, performance of git commands using the is_path_excluded API (e.g.
'git ls-files --cached --ignored --exclude-standard') is greatly improved
as this no longer re-reads .gitignore files on each call.
Here's some performance data from the linux and WebKit repos (best of 10
runs on a Debian Linux on SSD, core.preloadIndex=true):
| ls-files -ci | status | status --ignored
| linux | WebKit | linux | WebKit | linux | WebKit
-------+-------+--------+-------+--------+-------+---------
before | 0.506 | 6.539 | 0.212 | 1.555 | 0.323 | 2.541
after | 0.080 | 1.191 | 0.218 | 1.583 | 0.321 | 2.579
gain | 6.325 | 5.490 | 0.972 | 0.982 | 1.006 | 0.985
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notion of "ignored tracked" directories introduced in 721ac4ed "dir.c:
Make git-status --ignored more consistent" has a few unwanted side effects:
- git-clean -d -X: deletes ignored tracked directories. git-clean should
never delete tracked content.
- git-ls-files --ignored --other --directory: lists ignored tracked
directories instead of "other" directories.
- git-status --ignored: lists ignored tracked directories while contained
files may be listed as modified. Paths listed by git-status should be
disjoint (except in long format where a path may be listed in both the
staged and unstaged section).
Additionally, the current behaviour violates documentation in gitignore(5)
("Specifies intentionally *untracked* files to ignore") and Documentation/
technical/api-directory-listing.txt ("DIR_SHOW_OTHER_DIRECTORIES: Include
a directory that is *not tracked*.").
In dir.c::treat_directory, remove the special handling of ignored tracked
directories, so that the DIR_SHOW_OTHER_DIRECTORIES flag only affects
"other" (i.e. untracked) directories. In dir.c::dir_add_name, check that
added paths are untracked even if DIR_SHOW_IGNORED is set.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored path/' doesn't list ignored files and directories
within 'path' if some component of 'path' is classified as untracked.
Disable the DIR_SHOW_OTHER_DIRECTORIES flag while traversing leading
directories. This prevents treat_leading_path() with DIR_SHOW_IGNORED flag
from aborting at the top level untracked directory.
As a side effect, this also eliminates a recursive directory scan per
leading directory level, as treat_directory() can no longer call
read_directory_recursive() when called from treat_leading_path().
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists empty untracked directories as ignored, even
though they don't have any ignored files.
When checking if a directory is already listed as untracked (i.e. shouldn't
be listed as ignored as well), don't assume that the directory has only
ignored files if it doesn't have untracked files, as the directory may be
empty.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-ls-files --ignored --directories' hides empty directories even though
--no-empty-directory was not specified.
Treat the DIR_HIDE_EMPTY_DIRECTORIES flag independently from
DIR_SHOW_IGNORED to make all git-ls-files options work as expected.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists ignored tracked directories without any
ignored files if a tracked file happens to match an exclude pattern.
Always exclude tracked files.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists both the ignored directory and the ignored
files if the files are in a tracked sub directory.
When recursing into sub directories in read_directory_recursive, pass on
the check_only parameter so that we don't accidentally add the files.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' drops ignored directories if they contain untracked
files in an untracked sub directory.
Fix it by getting exact (recursive) excluded status in treat_directory.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of test cases and a corner case bugfix for "git rm".
* jk/rm-removed-paths:
t3600: document failure of rm across symbolic links
t3600: test behavior of reverse-d/f conflict
rm: do not complain about d/f conflicts during deletion
A pattern "dir" (without trailing slash) in the attributes file
stopped matching a directory "dir" by mistake with an earlier change
that wanted to allow pattern "dir/" to also match.
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
If we used to have an index entry "d/f", but "d" has been
replaced by a non-directory entry, the user may still want
to run "git rm" to delete the stale index entry. They could
use "git rm --cached" to just touch the index, but "git rm"
should also work: we explicitly try to handle the case that
the file has already been removed from the working tree.
However, because unlinking "d/f" in this case will not yield
ENOENT, but rather ENOTDIR, we do not notice that the file
is already gone. Instead, we report it as an error.
The simple solution is to treat ENOTDIR in this case exactly
like ENOENT; all we want to know is whether the file is
already gone, and if a leading path is no longer a
directory, then by definition the sub-path is gone.
Reported-by: jpinheiro <7jpinheiro@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix 1.8.1.x regression that stopped matching "dir" (without
trailing slash) to a directory "dir".
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
This function takes two counted strings: a <pattern, patternlen> pair
and a <pathname, pathlen> pair. But we end up feeding the result to
fnmatch, which expects NUL-terminated strings.
We can fix this by calling the fnmatch_icase_mem function, which
handles re-allocating into a NUL-terminated string if necessary.
While we're at it, we can avoid even calling fnmatch in some cases. In
addition to patternlen, we get "prefix", the size of the pattern that
contains no wildcard characters. We do a straight match of the prefix
part first, and then use fnmatch to cover the rest. But if there are
no wildcards in the pattern at all, we do not even need to call
fnmatch; we would simply be comparing two empty strings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we receive a pattern that starts with "/", we shift it
forward to avoid looking at the "/" part. Since the prefix
and patternlen parameters are counts of what is in the
pattern, we must decrement them as we increment the pointer.
We remembered to handle prefix, but not patternlen. This
didn't cause any bugs, though, because the patternlen
parameter is not actually used. Since it will be used in
future patches, let's correct this oversight.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes two counted strings (<basename, basenamelen> and
<pattern, patternlen>) as parameters, together with prefix (the
length of the prefix in pattern that is to be matched literally
without globbing against the basename) and EXC_* flags that tells it
how to match the pattern against the basename.
However, it did not pay attention to the length of these counted
strings. Update them to do the following:
* When the entire pattern is to be matched literally, the pattern
matches the basename only when the lengths of them are the same,
and they match up to that length.
* When the pattern is "*" followed by a string to be matched
literally, make sure that the basenamelen is equal or longer than
the "literal" part of the pattern, and the tail of the basename
string matches that literal part.
* Otherwise, use the new fnmatch_icase_mem helper to make
sure we only lookmake sure we use only look at the
counted part of the strings. Because these counted strings are
full strings most of the time, we check for termination
to avoid unnecessary allocation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git status --ignored" did not work well when used with
"--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Output from "git status --ignored" showed an unexpected interaction
with "--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
When enumerating paths that are ignored, paths the index knows
about are not included in the result. The "index knows about"
check is done by consulting the name hash, not the actual
contents of the index:
- When core.ignorecase is false, directory names are not in the
name hash, and ignored ones are shown as ignored (directories
can never be tracked anyway).
- When core.ignorecase is true, however, the name hash keeps
track of the names of directories, in order to detect
additions of the paths under different cases. This causes
ignored directories to be mistakenly excluded when
enumerating ignored paths.
Stop excluding directories that are in the name hash when
looking for ignored files in dir_add_name(); the names that are
actually in the index are excluded much earlier in the callchain
in treat_file(), so this fix will not make them mistakenly
identified as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a grammatical issue in the description of these functions, and
make it more obvious how and why seen[] can be reused across multiple
invocations.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).
For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1. So for example the 2nd pattern provided via
--exclude would be numbered -2. This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
The current behavior of git-status is inconsistent and misleading.
Especially when used with --untracked-files=all option:
- files ignored in untracked directories will be missing from
status output.
- untracked files in committed yet ignored directories are also
missing.
- with --untracked-files=normal, untracked directories that
contains only ignored files are dropped too.
Make the behavior more consistent across all possible use cases:
- "--ignored --untracked-files=normal" doesn't show each specific
files but top directory. It instead shows untracked directories
that only contains ignored files, and ignored tracked directories
with untracked files.
- "--ignored --untracked-files=all" shows all ignored files, either
because it's in an ignored directory (tracked or untracked), or
because the file is explicitly ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, wildmatch() has always honoured directory boundary and there
was no way to turn it off. Make it behave more like fnmatch() by
requiring all callers that want the FNM_PATHNAME behaviour to pass
that in the equivalent flag WM_PATHNAME. Callers that do not specify
WM_PATHNAME will get wildcards like ? and * in their patterns matched
against '/', just like not passing FNM_PATHNAME to fnmatch().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- All exported constants now have a prefix WM_
- Do not rely on FNM_* constants, use the WM_ counterparts
- Remove TRUE and FALSE to follow Git's coding style
- While at it, turn flags type from int to unsigned int
- Add an (unused yet) argument to carry extra information
so that we don't have to change the prototype again later
when we need to pass other stuff to wildmatch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.
http://article.gmane.org/gmane.comp.version-control.git/206128
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching_path() which return the last
exclude_list element which matched, or NULL if no match was found.
is_path_excluded() becomes a wrapper around this, and just returns 0
or 1 depending on whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching() which returns the last exclude_list
element which matched, or NULL if no match was found. is_excluded()
becomes a wrapper around this, and just returns 0 or 1 depending on
whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excluded function uses a new helper function called
last_exclude_matching_from_list() to perform the inner loop over all of
the exclude patterns. The helper just tells us whether the path is
included, excluded, or undecided.
However, it may be useful to know _which_ pattern was triggered. So
let's pass out the entire exclude match, which contains the status
information we were already passing out.
Further patches can make use of this.
This is a modified forward port of a patch from 2009 by Jeff King:
http://article.gmane.org/gmane.comp.version-control.git/108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
