Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally update-pre-post-images could assume that any whitespace
fixing will make the result only shorter by unexpanding runs of
leading SPs into HTs and removing trailing whitespaces at the end of
lines. Updating the post-image we read from the patch to match the
actual result can be performed in-place under this assumption.
These days, however, we have tab-in-indent (aka Python) rule whose
result can be longer than the original, and we do need to allocate
a larger buffer than the input and replace the result.
Fortunately the support for lengthening rewrite was already added
when we began supporting "match while ignoring whitespace
differences" mode in 86c91f9179 (git apply: option to ignore
whitespace differences, 2009-08-04). We only need to correctly
count the number of bytes necessary to hold the updated result and
tell the function to allocate a new buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new whitespace "rule" is added that sets the tab width to use for
whitespace checks and fix-ups and replaces the hard-coded constant 8.
Since the setting is part of the rules, it can be set per file using
.gitattributes.
The new configuration is backwards compatible because older git versions
simply ignore unknown whitespace rules.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the whitespace rule tab-in-indent is enabled, apply --whitespace=fix
replaces tabs by the appropriate amount of blanks. The code used
"dst->len % 8" as the criterion to stop adding blanks. But it forgot that
dst holds more than just the current line. Consequently, the modulus was
computed correctly only for the first added line, but not for the second
and subsequent lines. Fix it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_might_fail instead of ignoring the exit status from git
config --unset, and let the exit status propagate past rm -f (which
does not fail on ENOENT). Otherwise bugs that lead git config to
crash would not be detected when this test runs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 51667147be, "git apply --whitespace=fix" was extended to
allow a blank context line to match beyond the end of the file,
but only if the context line was in the leading part of the
hunk (i.e. the hunk inserted additional contents at the end
of the file).
Drop the restriction that the context line must be in the
leading part of the hunk, thus allowing a file to be changed
from:
a
(blank line)
to:
b
a
(blank line)
Note that the blank line will be kept, because "--whitespace=fix"
only removes trailing blank lines that a hunk would add, never
trailing blank lines in the context.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
The whitespace error of adding blank lines at the end of file should
trigger if you added a non-empty line at the end, if the contents of the
line is full of whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command tries to strip blank lines at the end of the file added by a
patch. It is done by first detecting if a hunk in patch has additional
blank lines at the end of itself, and if so checking if such a hunk
applies at the end of file. This patch addresses a bug in the logic to
implement the former (the previous one addressed a bug in the latter).
If the original ends with blank lines, often the patch hunk ends like
this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. This example patch adds
three trailing blank lines, but the code fails to notice it, because it
only pays attention to added blank lines at the very end of the hunk. In
this example, the three added blank lines do not appear textually at the
end in the patch, even though you can see that they are indeed added at
the end, if you rearrange the diff like this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
_$
_$
+$
+$
+$
The fix is not to reset the number of (candidate) added blank lines at the
end when the loop sees a context line that is empty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b94f2ed (builtin-apply.c: make it more line oriented, 2008-01-26) broke
the logic used to detect if a hunk adds blank lines at the end of the
file. With the new code after that commit:
- img holds the contents of the file that the hunk is being applied to;
- preimage has the lines the hunk expects to be in img; and
- postimage has the lines the hunk wants to update the part in img that
corresponds to preimage with.
and we need to compare if the last line of preimage (not postimage)
matches the last line of img to see if the hunk applies at the end of the
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
735c674 (Trailing whitespace and no newline fix, 2009-07-22) completely
broke --whitespace=fix, causing it to lose all the empty lines in a patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch adds a new line to the end of a file and this line ends with
one trailing whitespace character and has no newline, then
'--whitespace=fix' currently does not remove that trailing whitespace.
This patch fixes this by removing the check for trailing whitespace at
the end of the line at a hardcoded offset which does not take the
eventual absence of newline into account.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier introduced core.whitespace to allow users to tweak the
definition of what the "whitespace errors" are, for the purpose of diff
output highlighting. This teaches the same to git-apply, so that the
command can both detect (when --whitespace=warn option is given) and fix
(when --whitespace=fix option is given) as configured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
