Some versions of libcurl report their output when GIT_CURL_VERBOSE
is set differently than other versions do. At least one variant
(version unknown but likely pre-7.18.1) reports the POST payload to
stderr, and omits the blank line after each HTTP request/response.
We clip these lines out of the stderr output now before doing the
compare, so we aren't surprised by this trivial difference.
Reported-by: Tarmigan <tarmigan+git@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eons ago HPA taught git-daemon how to protect itself from /../
attacks, which Junio brought back into service in d79374c7b5
("daemon.c and path.enter_repo(): revamp path validation").
I did not carry this into git-http-backend as originally we relied
only upon PATH_TRANSLATED, and assumed the HTTP server had done
its access control checks to validate the resolved path was within
a directory permitting access from the remote client. This would
usually be sufficient to protect a server from requests for its
/etc/passwd file by http://host/smart/../etc/passwd sorts of URLs.
However in 917adc0360 Mark Lodato added GIT_PROJECT_ROOT as an
additional method of configuring the CGI. When this environment
variable is used the web server does not generate the final access
path and therefore may blindly pass through "/../etc/passwd"
in PATH_INFO under the assumption that "/../" might have special
meaning to the invoked CGI.
Instead of permitting these sorts of malformed path requests, we
now reject them back at the client, with an error message for the
server log. This matches git-daemon behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gitweb how to produce nicer snapshot names by only using the
short hash id. If clients make requests using a tree-ish that is not
a partial or full SHA-1 hash, then the short hash will also be appended
to whatever they asked for. If clients request snapshot of a tag
(which means that $hash ('h') parameter has 'refs/tags/' prefix),
use only tag name.
Update tests cases in t9502-gitweb-standalone-parse-output.
Gitweb uses the following format for snapshot filenames:
<sanitized project name>-<version info>.<snapshot suffix>
where <sanitized project name> is project name with '.git' or '/.git'
suffix stripped, unless '.git' is the whole project name. For
snapshot prefix it uses:
<sanitized project name>-<version info>/
as compared to <sanitized project name>/ before (without version info).
Current rules for <version info>:
* if 'h' / $hash parameter is SHA-1 or shortened SHA-1, use SHA-1
shortened to to 7 characters
* otherwise if 'h' / $hash parameter is tag name (it begins with
'refs/tags/' prefix, use tag name (with 'refs/tags/' stripped
* otherwise if 'h' / $hash parameter starts with 'refs/heads/' prefix,
strip this prefix, convert '/' into '.', and append shortened SHA-1
after '-', i.e. use <sanitized hash>-<shortened sha1>
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t9502-gitweb-standalone-parse-output test script, which runs
gitweb as a CGI script from the commandline and checks that it
produces the correct output.
Currently this test script contains only tests of snapshot naming
(proposed name of snapshot file) and snapshot prefix (prefix of files
in the archive / snapshot). It defines and uses 'tar' snapshot
format, without compression, for easy checking of snapshot prefix.
Testing is done using check_snapshot function.
Gitweb uses the following format for snapshot filenames:
<sanitized project name>-<hash parameter><snapshot suffix>
where <sanitized project name> is project name with '.git' or '/.git'
suffix stripped, unless '.git' is the whole project name. For
snapshot prefix it uses simply:
<sanitized project name>/
Disadvantages of current snapshot rules:
* There exists convention that <basename>.<suffix> archive unpacks to
<basename>/ directory (<basename>/ is prefix of archive). Gitweb
does not respect it
* Snapshot links generated by gitweb use full SHA-1 id as a value of
'h' / $hash parameter. With current rules it leads to long file
names like e.g. repo-1005c80cc11c531d327b12195027cbbb4ff9e3cb.tgz
* For handcrafted URLs, where 'h' / $hash parameter is a symbolic
'volatile' revision name such as "HEAD" or "next" snapshot name
doesn't tell us what exact version it was created from
* Proposed filename in Content-Disposition header should not contain
any directory path information, which means that it should not
contain '/' (see RFC2183)... which means that snapshot naming is
broken for $hash being e.g. hirearchical branch name such as
'xx/test'
This would be improved in next commit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, format-patch would use its default stat
plus patch format only when no diff format was given on the
command line. This meant that "format-patch -p" would
suppress the stat and show just the patch.
Commit 68daa64 changed this to keep the stat format when we
had an "implicit" patch format, like "-U5". As a side
effect, this meant that an explicit patch format was now
ignored (because cmd_format_patch didn't know the reason
that the format was set way down in diff_opt_parse).
This patch unbreaks what 68daa64 did (while still preserving
what 68daa64 was trying to do), reinstating "-p" to suppress
the default behavior. We do this by parsing "-p" ourselves
in format-patch, and noting whether it was used explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"commit -s" used to add an empty line before adding S-o-b line only when
the last line of the existing log message is not another S-o-b line, but
c1e01b0 (commit: More generous accepting of RFC-2822 footer lines.,
2009-10-28) introduced logic to omit this empty line when the message ends
with a run of "footer" lines, to cover S-o-b's friends, e.g. Acked-by.
However, the logic was overzealous and missed one corner case. A message
that consists of a single line that begins with Token + colon, it can be
mistaken as a S-o-b's friend. We do want an empty line in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A tree-wide bikeshedding to replace "fast forward" into "fast-forward" is
in 'master'. Since we want to keep this "test modernization" series
mergeable also to the maintenance track, we would need to tweak the test
to accept both old spellings and new spellings.
Sigh... This kind of headache is the primary reason we try not to allow
such a tree-wide bike-shedding, but the damage has already been done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using bare "cmp", use "test_cmp". Output when the test is run
with a -v option becomes easier to diagnose when something goes wrong
because on saner platforms test_cmp uses "diff -u".
There is no need to put an extra backslash to a line that ends with a '|'
(i.e. the upstream of a pipe).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some differences between t1200 and the gitcore-tutorial. Add
missing tests for manually merging two branches, and use the same
commands in both files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many parts of the tests in t1200 are run outside the test harness,
circumventing the usefulness of -v and spewing messages to stdout when
-v isn't used. Fix these problems by modernizing the test a bit.
An extra test_done has existed since commit 6a74642 (git-commit --amend:
two fixes., 2006-04-20) leading to the last 6 tests never being run.
Remove it and teach the resolve merge test about fast-forward merges.
Also fix the last test's incorrect find command and prune before
checking for unpacked objects so we remove the unreachable conflict-marked
blob.
Finally, we remove the TODO notes, because fetch, push, and clone have
their own tests since t1200 was introduced and we're not going to add
them here 4 years later.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the major configuration settings which control access to
the repository:
http.getanyfile
http.uploadpack
http.receivepack
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top level directory "/smart/" of the test Apache server is mapped
through our git-http-backend CGI, but uses the same underlying
repository space as the server's document root. This is the most
simple installation possible.
Server logs are checked to verify the client has accessed only the
smart URLs during the test. During fetch testing the headers are
also logged from libcurl to ensure we are making a reasonably sane
HTTP request, and getting back reasonably sane response headers
from the CGI.
When validating the request headers used during smart fetch we munge
away the actual Content-Length and replace it with the placeholder
"xxx". This avoids unnecessary varability in the test caused by
an unrelated change in the requested capabilities in the first want
line of the request. However, we still want to look for and verify
that Content-Length was used, because smaller payloads should be
using Content-Length and not "Transfer-Encoding: chunked".
When validating the server response headers we must discard both
Content-Length and Transfer-Encoding, as Apache2 can use either
format to return our response.
During development of this test I observed Apache returning both
forms, depending on when the processes got CPU time. If our CGI
returned the pack data quickly, Apache just buffered the whole
thing and returned a Content-Length. If our CGI took just a bit
too long to complete, Apache flushed its buffer and instead used
"Transfer-Encoding: chunked".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To clarify what part of the HTTP transprot is being tested we change
the URLs used by existing tests to include /dumb/ at the start,
indicating they use the non-Git aware code paths.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If LIB_HTTPD_PORT is not set already, lib-httpd will set it to the
default 8111.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -c, -C, or --amend, we are trying one of two things: using the
source as a template or modifying a commit with corrections.
When these options are used, the authorship and timestamp recorded in the
newly created commit are always taken from the original commit. This is
inconvenient when we just want to borrow the commit log message or when
our change to the code is so significant that we should take over the
authorship (with the blame for bugs we introduce, of course).
The new --reset-author option is meant to solve this need by regenerating
the timestamp and setting the committer as the new author.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote helper interface now supports the push capability,
which can be used to ask the implementation to push one or more
specs to the remote repository. For remote-curl we implement this
by calling the existing WebDAV based git-http-push executable.
Internally the helper interface uses the push_refs transport hook
so that the complexity of the refspec parsing and matching can be
reused between remote implementations. When possible however the
helper protocol uses source ref name rather than the source SHA-1,
thereby allowing the helper to access this name if it is useful.
>From Clemens Buchacher <drizzd@aon.at>:
update http tests according to remote-curl capabilities
o Pushing packed refs is now fixed.
o The transport helper fails if refs are already up-to-date. Add
a test for that.
o The transport helper will notice if refs are already
up-to-date. We therefore need to update server info in the
unpacked-refs test.
o The transport helper will purge deleted branches automatically.
o Use a variable ($ORIG_HEAD) instead of full SHA-1 name.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
CC: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save HTTP headers into gitweb.headers, and the body of message into
gitweb.body in gitweb_run()
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience in scripts and aliases, add the option
--ff-only to only allow fast-forwards (and up-to-date,
despite the name).
Disallow combining --ff-only and --no-ff, since they
flatly contradict each other.
Allow all other options to be combined with --ff-only
(i.e. do not add any code to handle them specially),
including the following options:
* --strategy (one or more): As long as the chosen merge
strategy results in up-to-date or fast-forward, the
command will succeed.
* --squash: I cannot imagine why anyone would want to
squash commits only if fast-forward is possible, but I
also see no reason why it should not be allowed.
* --message: The message will always be ignored, but I see
no need to explicitly disallow providing a redundant message.
Acknowledgements: I did look at Yuval Kogman's earlier
patch (107768 in gmane), mainly as shortcut to find my
way in the code, but I did not copy anything directly.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because --root can put our trash directories elsewhere,
using ".." may not always work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
so that they can be run individually as
(cd t && ./t9150-svk-mergetickets.sh)
etc. just like all other test scripts.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b5227d8 changed the behavior of "ls-files" with
respect to includes, but accidentally broke the "-i" option
The original behavior was:
1. if no "-i" is given, cull all results according to --exclude*
2. if "-i" is given, show the inverse of (1)
The broken behavior was:
1. if no "-i" is given:
a. for "-o", cull results according to --exclude*
b. for index files, always show all
2. if "-i" is given:
a. for "-o", shows the inverse of (1a)
b. for index files, always show all
The fixed behavior keeps the new (1b) behavior introduced
by b5227d8, but fixes the (2b) behavior to show only ignored
files, not all files.
This patch also tweaks the documentation. The original text
was somewhat obscure in the first place, but it is also now
inaccurate (the relationship between (1b) and (2b) is not
quite a "reverse").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colored word diff without context lines firstly printed all the hunk
headers among each other and then printed the diff.
This was due to the code relying on getting at least one context line at
the end of each hunk, where the colored words would be flushed (it is
done that way to be able to ignore rewrapped lines).
Noticed by Markus Heidelberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git commit -s' will insert a blank line before the Signed-off-by
line at the end of the message, unless this last line is a
Signed-off-by line itself. Common use has other trailing lines
at the ends of commit text, in the style of RFC2822 headers.
Be more generous in considering lines to be part of this footer.
If the last paragraph of the commit message reasonably resembles
RFC-2822 formatted lines, don't insert that blank line.
The new Signed-off-by line is still only suppressed when the
author's existing Signed-off-by is the last line of the message.
Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we show deletion as a big hunk deleting all of the
file's text. However, for files with no content, the diff
shows just the 'deleted file mode ...' line. This patch
cause "add -p" (and related commands) to recognize that line
and explicitly ask about deleting the file.
We only add the "stage this deletion" hunk for empty files,
since other files will already ask about the big content
deletion hunk. We could also change those files to simply
display "stage this deletion", but showing the actual
deleted content is probably what an interactive user wants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --dirty option, git describe works on HEAD but append s"-dirty"
iff the contents of the work tree differs from HEAD. E.g.
$ git describe --dirty
v1.6.5-15-gc274db7
$ echo >> Makefile
$ git describe --dirty
v1.6.5-15-gc274db7-dirty
The --dirty option can also be used to specify what is appended, instead
of the default string "-dirty".
$ git describe --dirty=.mod
v1.6.5-15-gc274db7.mod
Many build scripts use `git describe` to produce a version number based on
the description of HEAD (on which the work tree is based) + saying that if
the build contains uncommitted changes. This patch helps the writing of
such scripts since `git describe --dirty` does directly the intended thing.
Three possiblities were considered while discussing this new feature:
1. Describe the work tree by default and describe HEAD only if "HEAD" is
explicitly specified
Pro: does the right thing by default (both for users and for scripts)
Pro: other git commands that works on the work tree by default
Con: breaks existing scripts used by the Linux kernel and other projects
2. Use --worktree instead of --dirty
Pro: does what it says: "git describe --worktree" describes the work tree
Con: other commands do not require a --worktree option when working
on the work tree (it often is the default mode for them)
Con: unusable with an optional value: "git describe --worktree=.mod"
is quite unintuitive.
3. Use --dirty as in this patch
Pro: makes sense to specify an optional value (what the dirty mark is)
Pro: does not have any of the big cons of previous alternatives
* does not break scripts
* is not inconsistent with other git commands
This patch takes the third approach.
Signed-off-by: Jean Privat <jean@pryen.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feature is long overdue; convert SVN's merge representation to git's
as revisions are imported. This works by converting the list of revisions
in each line of the svn:mergeinfo into git revision ranges, and then
checking the latest of each of these revision ranges for A) being new and
B) now being completely merged.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Dump generated with SVN 1.5.1 (on lenny amd64). This test
should hopefully cover all but a few intermediate versions of
the svnmerge.py script.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVK is a simple case to start with, as its idea of merge parents
matches git's one. When a svk:merge ticket is encountered, check each
of the listed merged revisions to see if they are in the history of
this commit; if not, then we have encountered a merge - record it.
[ew: minor formatting cleanups]
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Possibly the 'perl' in the PATH is not the one to be used for the tests;
let PERL set in the environment select it.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Dump generated with SVK 2.0.2 and SVN 1.5.1 (on lenny amd64).
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copied from the submodule summary test and changed to reflect the
differences in the output of git diff --submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also verify that multiple references to the _same_ note blob are _not_
concatenated.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating repos with 10/100/1000/10000 commits and notes takes a lot of time.
However, using git-fast-import to do the job is a lot more efficient than
using plumbing commands to do the same.
This patch decreases the overall run-time of this test on my machine from
~3 to ~1 minutes.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a 'notemodify' subcommand of the 'commit' command. This subcommand
is similar to 'filemodify', except that no mode is supplied (all notes have
mode 0644), and the path is set to the hex SHA1 of the given "comittish".
This enables fast import of note objects along with their associated commits,
since the notes can now be named using the mark references of their
corresponding commits.
The patch also includes a test case of the added functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" and "-F" options are already the established method
(in both git-commit and git-tag) to specify a commit/tag message
without invoking the editor. This patch teaches "git notes edit"
to respect the same options for specifying a notes message without
invoking the editor.
Multiple "-m" and/or "-F" options are concatenated as separate
paragraphs.
The patch also updates the "git notes" documentation and adds
selftests for the new functionality. Unfortunately, the added
selftests include a couple of lines with trailing whitespace
(without these the test will fail). This may cause git to warn
about "whitespace errors".
This patch has been improved by the following contributions:
- Thomas Rast: fix trailing whitespace in t3301
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-notes have the potential of being pretty expensive, so test with
a lot of commits. A lot. So to make things cheaper, you have to
opt-in explicitely, by setting the environment variable
GIT_NOTES_TIMING_TESTS.
This patch has been improved by the following contributions:
- Junio C Hamano: tests: fix "export var=val"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
This patch has been improved by the following contributions:
- Tor Arne Vestbø: fix printing of multi-line notes
- Michael J Gruber: test and handle empty notes gracefully
- Thomas Rast:
- only clean up message file when editing
- use GIT_EDITOR and core.editor over VISUAL/EDITOR
- t3301: fix confusing quoting in test for valid notes ref
- t3301: use test_must_fail instead of !
- refuse to edit notes outside refs/notes/
- Junio C Hamano: tests: fix "export var=val"
- Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt"
- Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
"git grep" would segfault if its -f option was used because it would
try to use an uninitialized strbuf, so initialize the strbuf.
Thanks to Johannes Sixt <j.sixt@viscovery.net> for the help with the
test cases.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerating empty path components in ref names means each ref does
not have a unique name. This creates difficulty for porcelains
that want to see if two branches are equal. Add a helper associating
to each ref a canonical name.
If a user asks a porcelain to create a ref "refs/heads//master",
the porcelain can run "git check-ref-format --print refs/heads//master"
and only deal with "refs/heads/master" from then on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git check-ref-format" command is a basic command various
porcelains rely on. Test its functionality to make sure it does
not unintentionally change.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In all parts of git, .gitignore and other exclude files
impact only how we treat untracked files; they should have
no effect on files listed in the index.
This behavior was originally implemented very early on in
9ff768e, but only for --exclude-from. Later, commit 63d285c
accidentally caused us to trigger the behavior for
--exclude-per-directory.
This patch totally ignores excludes for files found in the
index. This means we are reversing the original intent of
9ff768e, while at the same time fixing the accidental
behavior of 63d285c. This is a good thing, though, as the
way that 9ff768e behaved does not really make sense with the
way exclusions are used in modern git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MTAs reject Cc: lines longer than 78 chars.
Avoid this by using the same join as "To:" ",\n\t"
so each subsequent Cc entry is on a new line.
RCPT TO: should have a single entry per line.
see: http://www.ietf.org/rfc/rfc2821.txt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --prefix=string that does not end with a slash, the top-level entries
are written out with the specified prefix as expected, but no paths in the
directories are added.
Fix this by adding the prefix in write_archive_entry() instead of letting
get_pathspec() and read_tree_recursive() pair; they are designed to only
handle prefixes that are path components.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git show-branch" without any parameter in a repository that
has showbranch.default defined, we used to rely on the fact that our
handcrafted option parsing loop never looked at av[0].
The array of default strings had the first real command line argument in
default_arg[0], but the option parser wanted to look at the array starting
at av[1], so we assigned the address of -1th element to av to force the
loop start working from default_arg[0].
This no longer worked since 5734365 (show-branch: migrate to parse-options
API, 2009-05-21), as parse_options_start() saved the incoming &av[0] in
its ctx->out and later in parse_options_end() it did memmove to ctx->out
(with ctx->cpidx == 0), overwriting the memory before default_arg[] array.
I am not sure if this is a bug in parse_options(), or a bug in the caller,
and tonight I do not have enough concentration to figure out which. In
any case, this patch works the issue around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes '--relative-date' so that it does not give '0
year, 12 months', for the interval 360 <= diff < 365.
Signed-off-by: Johan Sageryd <j416@1616.se>
Signed-off-by: Jeff King <peff@peff.net>
Makes things nicer in cases when you hand craft the snapshot URL but
make a typo in defining the hash variable (e.g. netx instead of next);
you will now get an error message instead of a broken tarball.
Tests for t9501 are included to demonstrate added functionality.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
parse_long_opt always matches both --opt and --no-opt for any option
"opt", and only get_value checks whether --no-opt is actually valid.
Since the options for git branch contains both "no-merged" and "merged"
there are two matches for --no-merge, but no exact match. With this
patch the negation of a NONEG option is rejected earlier, but it changes
the error message from "option `no-opt' isn't available" to "unknown
option `no-opt'".
[jk: added test]
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
The earlier logic tried to colour any and all blank lines that were added
beyond the last blank line in the original, but this was very wrong. If
you added 96 blank lines, a non-blank line, and then 3 blank lines at the
end, only the last 3 lines should trigger the error, not the earlier 96
blank lines.
We need to also make sure that the lines are after the last non-blank line
in the postimage as well before deciding to paint them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the effect of an earlier change by f7835a2 (preserve mtime of local
clone, 2009-09-12) to keep stale loose object files stale in the new
repository when a local clone is made by copying files in .git/
directory.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the call to authors-prog was not properly escaped, so any
special characters in the Subversion username, such as spaces and
semi-colons, would be interpreted by the shell rather than being passed
in as the first argument. Now all unsafe characters are escaped using
"git rev-parse --sq-quote"
[ew: switched from "\Q..\E" to "rev-parse --sq-quote"]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.3-grep-relative-up:
grep: accept relative paths outside current working directory
grep: fix exit status if external_grep() punts
Conflicts:
t/t7002-grep.sh
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
"git grep" would barf at relative paths pointing outside the current
working directory (or subdirectories thereof). Use quote_path_relative(),
which can handle such cases just fine.
[jc: added tests.]
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the coloring logic processed the patch output one line at a time, we
couldn't easily color code the new blank lines at the end of file.
Reuse the adds_blank_at_eof() function to find where the runs of such
blank lines start, keep track of the line number in the preimage while
processing the patch output one line at a time, and paint the new blank
lines that appear after that line to implement this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" logic used to share the same issue as the one fixed for
"git apply" earlier in this series, in that a patch that adds new blank
lines at end could appear as
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. Instead of looking at
each line in the patch in the callback, simply count the blank lines from
the end in two versions, and notice the presence of new ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" code used to conflate trailing-space whitespace error
class with this, but now we have a proper separate error class, we should
check it under blank-at-eof, not trailing-space.
The whitespace error is not about _having_ blank lines at end, but about
adding _new_ blank lines. To keep the message consistent with what is
given by "git apply", call whitespace_error_string() to generate it,
instead of using a hardcoded custom message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace error of adding blank lines at the end of file should
trigger if you added a non-empty line at the end, if the contents of the
line is full of whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command tries to strip blank lines at the end of the file added by a
patch. It is done by first detecting if a hunk in patch has additional
blank lines at the end of itself, and if so checking if such a hunk
applies at the end of file. This patch addresses a bug in the logic to
implement the former (the previous one addressed a bug in the latter).
If the original ends with blank lines, often the patch hunk ends like
this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. This example patch adds
three trailing blank lines, but the code fails to notice it, because it
only pays attention to added blank lines at the very end of the hunk. In
this example, the three added blank lines do not appear textually at the
end in the patch, even though you can see that they are indeed added at
the end, if you rearrange the diff like this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
_$
_$
+$
+$
+$
The fix is not to reset the number of (candidate) added blank lines at the
end when the loop sees a context line that is empty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b94f2ed (builtin-apply.c: make it more line oriented, 2008-01-26) broke
the logic used to detect if a hunk adds blank lines at the end of the
file. With the new code after that commit:
- img holds the contents of the file that the hunk is being applied to;
- preimage has the lines the hunk expects to be in img; and
- postimage has the lines the hunk wants to update the part in img that
corresponds to preimage with.
and we need to compare if the last line of preimage (not postimage)
matches the last line of img to see if the hunk applies at the end of the
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/approxidate:
fix approxidate parsing of relative months and years
tests: add date printing and parsing tests
refactor test-date interface
Add date formatting and parsing functions relative to a given time
Further 'approxidate' improvements
Improve on 'approxidate'
Conflicts:
date.c
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
These were broken by b5373e9. The problem is that the code
marks the month and year with "-1" for "we don't know it
yet", but the month and year code paths were not adjusted to
fill in the current time before doing their calculations
(whereas other units follow a different code path and are
fine).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, there was no coverage of relative date printing
or approxidate parsing routines (mainly because we had no
way of faking the "now" time for relative date calculations,
which made consistent testing impossible).
This new script tries to exercise the basic features of
show_date and approxidate. Most of the tests are just "this
obvious thing works" to prevent future regressions, with a
few exceptions:
- We confirm the fix in 607a9e8 that relative year/month
dates in the latter half of a year round correctly.
- We confirm that the improvements in b5373e9 and 1bddb25
work.
- A few tests are marked to expect failure, which are
regressions recently introduced by the two commits
above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is no longer used since 54bc13c (t8005: Nobody writes Russian in
shift_jis, 2009-06-18).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
Some platforms (IRIX 6.5, Solaris 7) do not provide the 'yes' utility.
Currently, some tests, including t7610 and t9001, try to call this program.
Due to the way the tests are structured, the tests still pass even though
this program is missing. Rather than succeeding by chance, let's provide
an implementation of the simple 'yes' utility in shell for all platforms to
use.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new test file, t9501, that checks HTTP status codes and messages
from gitweb.
Currently, the only tests are for the snapshot feature.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To accommodate additions to the test cases for gitweb, the preamble
from t9500 is now in its own library so that new sets of tests for
gitweb can use the same setup without copying the code.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
This teaches mailinfo the scissors -- >8 -- mark; the command ignores
everything before it in the message body.
For lefties among us, we also support -- 8< -- ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
When checkout sees that HEAD points to a non-existent ref,
it currently acts as if "-f" was given; this behavior dates
back to 5a03e7f, which enabled checkout from unborn branches
in the shell version of "git-checkout". The reasoning given
is to avoid the code path which tries to merge the tree
contents. When checkout was converted to C, this code
remained intact.
The unfortunate side effect of this strategy is that the
"force" code path will overwrite working tree and index
state that may be precious to the user. Instead of enabling
"force", this patch uses the normal "merge" codepath for an
unborn branch, but substitutes the empty tree for the "old"
commit.
This means that in the absence of an index, any files in the
working tree will be treated as untracked files, and a
checkout which would overwrite them is aborted. Similarly,
any paths in the index will be merged with an empty entry
as the base, meaning that unless the new branch's content is
identical to what's in the index, there will be a conflict
and the checkout will be aborted.
The user is then free to correct the situation or proceed
with "-f" as appropriate.
This patch also removes the "warning: you are on a branch
yet to be born" message. Its function was to warn the user
that we were enabling the "-f" option. Since we are no
longer doing that, there is no reason for the user to care
whether we are switching away from an unborn branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all refs sent by the remote repo during a fetch are reachable
locally, then no further conversation is performed with the remote. This
check is skipped when the --depth argument is provided to allow the
deepening of a shallow clone which corresponding remote repo has no
changed.
However, some additional filtering was added in commit c29727d5 to
remove those refs which are equal on both sides. If the remote repo has
not changed, then the list of refs to give the remote process becomes
empty and simply attempting to deepen a shallow repo always fails.
Let's stop being smart in that case and simply send the whole list over
when that condition is met. The remote will do the right thing anyways.
Test cases for this issue are also provided.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests help make sure graph_is_interesting() is doing the right
thing.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reset without argument displays a summary of the local modification,
like this:
$ git reset
Makefile: locally modified
Some people have problems with this; they look like an error message.
This patch makes its output mimic how "git checkout $another_branch"
reports the paths with local modifications. "git add --refresh --verbose"
is changed in the same way.
It also adds a header to make it clear that the output is informative,
and not an error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* bc/mailsplit-cr-at-eol:
Allow mailsplit (and hence git-am) to handle mails with CRLF line-endings
builtin-mailsplit.c: remove read_line_with_nul() since it is no longer used
builtin-mailinfo,builtin-mailsplit: use strbufs
strbuf: add new function strbuf_getwholeline()
Previously, graph_is_interesting() did not behave quite the same way as
the code in get_revision(). As a result, it would sometimes think
commits were uninteresting, even though get_revision() would return
them. This resulted in incorrect lines in the graph output.
This change creates a get_commit_action() function, which
graph_is_interesting() and simplify_commit() both now use to determine
if a commit will be shown. It is identical to the old simplify_commit()
behavior, except that it never calls rewrite_parents().
This problem was reported by Santi Béjar. The following command
would exhibit the problem before, but now works correctly:
git log --graph --simplify-by-decoration --oneline v1.6.3.3
Previously git graph did not display the output for this command
correctly between f29ac4f and 66996ec, among other places.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We skip t7407 because a patch series is cooking that uses is.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The substring expansion notation is a bashism that we have not so far
adopted. Use 'git rev-parse --short' instead, as this also handles
the case where the unique abbreviation is longer than 7 characters.
Also fix the typo; the object name for submodule #2 was copied from
submodule #1's by mistake.
Suggested-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add verification of the behaviour of '$name' to the git submodule
foreach selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The selftest verifies that:
- only checked out submodules are visited by 'git submodule foreach'
- the $path, and $sha1 variables are set correctly for each submodule
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And then unescape them when writing to $GIT_CONFIG.
SVN has different rules for repository URLs (usually the root)
and for paths within that repository (below the HTTP layer).
Thus, for the request URI path at the HTTP level, the URI needs
to be encoded. However, in the body of the HTTP request (the
with underlying SVN XML protocol), those paths should not be
URI-encoded[1]. For non-HTTP(S) requests, SVN appears to be
more flexible and will except weird characters in the URL as
well as URI-encoded ones.
Since users are used to using URLs being entirely URI-encoded,
git svn will now attempt to unescape the path portion of URLs
while leaving the actual repository URL untouched.
This change will be reflected in newly-created $GIT_CONFIG files
only. This allows users to switch between svn(+ssh)://, file://
and http(s):// urls without changing the fetch/branches/tags
config keys. This won't affect existing imports at all (since
things didn't work before this commit anyways), and will allow
users to force escaping into repository paths that look like
they're escaped (but are not).
Thanks to Mike Smullin for the original bug report and Björn
Steinbrink for summarizing it into testable cases for me.
[1] Except when committing copies/renames, see
commit 29633bb91c
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are all backed by git-add--interactive.perl under the hood.
Signed-off-by: Jeff King <peff@peff.net>
Acked-By: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly
removes old installed documents when the target directory has a leading
path that is a symlink. It turns out that "checkout-index --prefix" was
broken by recent b6986d8 (git-checkout: be careful about untracked
symlinks, 2009-07-29).
I suspect has_symlink_leading_path() could learn the third parameter
(prefix that is allowed to be symlinked directories) to allow us to retire
a similar function has_dirs_only_path().
Another avenue of fixing this I considered was to get rid of base_dir and
base_dir_len from "struct checkout", and instead make "git checkout-index"
when run with --prefix mkdir the leading path and chdir in there. It
might be the best longer term solution to this issue, as the base_dir
feature is used only by that rather obscure codepath as far as I know.
But at least this patch should fix this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading the index into an empty file has been broken by
5a56da5806, since it causes the existing
index to always be loaded first, and dies if it's an empty file:
$ GIT_INDEX_FILE=`mktemp` git read-tree master
fatal: index file smaller than expected
It breaks for instance committing from git.el. This patch reverts to the
previous behavior of only loading the index when merging it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for {reset,commit,stash} -p will frequently have to set both
worktree and index states to known values, and verify that the outcome
(again both worktree and index) are what was expected.
Add a small helper library that lets us do these tasks more easily.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-objects is run under the --strict option, objects that have
pointers to other objects are verified for the reachability at the end, by
calling check_object() on each of them, and letting check_object to walk
the reachable objects from them using fsck_walk() recursively.
The function however misunderstands the semantics of fsck_walk() function
when it makes a call to it, setting itself as the callback. fsck_walk()
expects the callback function to return a non-zero value to signal an
error (negative value causes an immediate abort, positive value is still
an error but allows further checks on sibling objects) and return zero to
signal a success. The function however returned 1 on some non error
cases, and to cover up this mistake, complained only when fsck_walk() did
not detect any error.
To fix this double-bug, make the function return zero on all success
cases, and also check for non-zero return from fsck_walk() for an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
