In order to clarify which value is used when there are multiple values
defined for a key, re-order the list of file locations so that it runs
from least specific to most specific. Then add a paragraph which simply
says that the last value will be used.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 00b347d (git-config: do not complain about duplicate
entries, 2012-10-23), "git config --get" does not exit with an error if
there are multiple values for the specified key but instead returns the
last value. Update the documentation to reflect this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was missed in the option list while mentioned from the general
description. Add it for completeness.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit status code from "git config" was way overspecified while
being incorrect. Update the implementation to give the documented
status for a case that was documented, and introduce a new code for
"all other errors".
* jc/maint-config-exit-status:
config: "git config baa" should exit with status 1
One fictitious command "proxy-command" is enclosed inside a double
quote pair, while another fictitious command "default-proxy" is not
in the example, but the quoting does not change anything in the pair
of examples. Remove the quotes to avoid unnecessary confusion.
Noticed by Michael Haggerty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--add" option is required to add a new value to a multivalued
configuration entry.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We instead failed with an undocumented exit status 255.
Also define a "catch-all" status and document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to write to $XDG_CONFIG_HOME/git/config if
- it already exists,
- $HOME/.gitconfig file doesn't, and
- The --global option is used.
Otherwise, write to $HOME/.gitconfig when the --global option is
given, as before.
If the user doesn't create $XDG_CONFIG_HOME/git/config, there is
absolutely no change. Users can use this new file only if they want.
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used.
Advice for users who often come back to an old version of Git: you
shouldn't create this file.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.
In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).
We do not write to this new location (yet).
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.
If the new file does not exist, the behavior is unchanged.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the FILES section of the git-config(1) manual:
$GIT_DIR/config::
Repository specific configuration file. (The filename is
of course relative to the repository root, not the working
directory.)
That's confusing because $GIT_DIR really is relative to the working
directory.
$ GIT_DIR=.git GIT_EDITOR='pwd; echo editing'
$ export GIT_DIR GIT_EDITOR
$ git config --edit --local
/home/jrn/src/git/Documentation
editing .git/config
It turns out that the comment is a remnant from older days when the
heading said ".git/config" (which is indeed relative to the top of the
worktree).
It was only when the heading was changed to refer more precisely to
<git dir>/config (see v1.5.3.2~18, AsciiDoc tweak to avoid leading
dot, 2007-09-14) that the parenthesis stopped making sense. Remove
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variable names must start with an alphabetic character, regexp config key
matching has its limits, sentence grammar.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return codes of git_config_set() and friends are magic numbers right
in the source. #define them in cache.h where the functions are declared,
and use the constants in the source.
Also, mention the resulting exit codes of "git config" in its man page
(and complete the list).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
395de250 (Expand ~ and ~user in core.excludesfile, commit.template)
introduced a C function git_config_pathname, doing ~/ and ~user/
expansion. This patch makes the feature available to scripts with 'git
config --get --path'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
Option --replace-all only allows at least two arguments, so
documentation was needing to be updated accordingly. A test showing
that the command fails with only one parameter is also provided.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea was originated by discussion about usability of manually
editing the config file in 'special needs' systems such as Windows. Now
the user can forget a bit about where the config files actually are.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff.external examples pass a flag to gnu-diff, but GNU diff
does not follow the GIT_EXTERNAL_DIFF interface.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For everything other than using "git config" to read or write a
git-style config file that isn't the current repo's config file,
GIT_CONFIG was actively detrimental. Rather than argue over which
programs are important enough to have work anyway, just fix all of
them at the root.
Also removes GIT_LOCAL_CONFIG, which would only be useful for programs
that do want to use global git-specific config, but not the repo's own
git-specific config, and want to use some other, presumably
git-specific config. Despite being documented, I can't find any sign that
it was ever used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to help scripts find out color settings from
the configuration file.
git config --get-colorbool color.diff
inspects color.diff variable, and exits with status 0 (i.e. success) if
color is to be used. It exits with status 1 otherwise.
If a script wants "true"/"false" answer to the standard output of the
command, it can pass an additional boolean parameter to its command
line, telling if its standard output is a terminal, like this:
git config --get-colorbool color.diff true
When called like this, the command outputs "true" to its standard output
if color is to be used (i.e. "color.diff" says "always", "auto", or
"true"), and "false" otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows scripts to grab color setting from the user
configuration, translated to ANSI color escape sequence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
