When flipping commits around on topic branches, I often end up doing
this sequence:
* Run "log --oneline next..jc/frotz" to find out the first commit
on 'jc/frotz' branch not yet merged to 'next';
* Run "checkout $that_commit^" to detach HEAD to the parent of it;
* Rebuild the series on top of that commit; and
* "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify.
Introduce a new syntax to "git checkout" to name the commit to switch to,
to make the first two steps easier. When the branch to switch to is
specified as A...B (you can omit either A or B but not both, and HEAD
is used instead of the omitted side), the merge base between these two
commits are computed, and if there is one unique one, we detach the HEAD
at that commit.
With this, I can say "checkout next...jc/frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
"git grep" would segfault if its -f option was used because it would
try to use an uninitialized strbuf, so initialize the strbuf.
Thanks to Johannes Sixt <j.sixt@viscovery.net> for the help with the
test cases.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerating empty path components in ref names means each ref does
not have a unique name. This creates difficulty for porcelains
that want to see if two branches are equal. Add a helper associating
to each ref a canonical name.
If a user asks a porcelain to create a ref "refs/heads//master",
the porcelain can run "git check-ref-format --print refs/heads//master"
and only deal with "refs/heads/master" from then on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git check-ref-format" command is a basic command various
porcelains rely on. Test its functionality to make sure it does
not unintentionally change.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In all parts of git, .gitignore and other exclude files
impact only how we treat untracked files; they should have
no effect on files listed in the index.
This behavior was originally implemented very early on in
9ff768e, but only for --exclude-from. Later, commit 63d285c
accidentally caused us to trigger the behavior for
--exclude-per-directory.
This patch totally ignores excludes for files found in the
index. This means we are reversing the original intent of
9ff768e, while at the same time fixing the accidental
behavior of 63d285c. This is a good thing, though, as the
way that 9ff768e behaved does not really make sense with the
way exclusions are used in modern git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MTAs reject Cc: lines longer than 78 chars.
Avoid this by using the same join as "To:" ",\n\t"
so each subsequent Cc entry is on a new line.
RCPT TO: should have a single entry per line.
see: http://www.ietf.org/rfc/rfc2821.txt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --prefix=string that does not end with a slash, the top-level entries
are written out with the specified prefix as expected, but no paths in the
directories are added.
Fix this by adding the prefix in write_archive_entry() instead of letting
get_pathspec() and read_tree_recursive() pair; they are designed to only
handle prefixes that are path components.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git show-branch" without any parameter in a repository that
has showbranch.default defined, we used to rely on the fact that our
handcrafted option parsing loop never looked at av[0].
The array of default strings had the first real command line argument in
default_arg[0], but the option parser wanted to look at the array starting
at av[1], so we assigned the address of -1th element to av to force the
loop start working from default_arg[0].
This no longer worked since 5734365 (show-branch: migrate to parse-options
API, 2009-05-21), as parse_options_start() saved the incoming &av[0] in
its ctx->out and later in parse_options_end() it did memmove to ctx->out
(with ctx->cpidx == 0), overwriting the memory before default_arg[] array.
I am not sure if this is a bug in parse_options(), or a bug in the caller,
and tonight I do not have enough concentration to figure out which. In
any case, this patch works the issue around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes '--relative-date' so that it does not give '0
year, 12 months', for the interval 360 <= diff < 365.
Signed-off-by: Johan Sageryd <j416@1616.se>
Signed-off-by: Jeff King <peff@peff.net>
Makes things nicer in cases when you hand craft the snapshot URL but
make a typo in defining the hash variable (e.g. netx instead of next);
you will now get an error message instead of a broken tarball.
Tests for t9501 are included to demonstrate added functionality.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
parse_long_opt always matches both --opt and --no-opt for any option
"opt", and only get_value checks whether --no-opt is actually valid.
Since the options for git branch contains both "no-merged" and "merged"
there are two matches for --no-merge, but no exact match. With this
patch the negation of a NONEG option is rejected earlier, but it changes
the error message from "option `no-opt' isn't available" to "unknown
option `no-opt'".
[jk: added test]
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
The earlier logic tried to colour any and all blank lines that were added
beyond the last blank line in the original, but this was very wrong. If
you added 96 blank lines, a non-blank line, and then 3 blank lines at the
end, only the last 3 lines should trigger the error, not the earlier 96
blank lines.
We need to also make sure that the lines are after the last non-blank line
in the postimage as well before deciding to paint them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the effect of an earlier change by f7835a2 (preserve mtime of local
clone, 2009-09-12) to keep stale loose object files stale in the new
repository when a local clone is made by copying files in .git/
directory.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the call to authors-prog was not properly escaped, so any
special characters in the Subversion username, such as spaces and
semi-colons, would be interpreted by the shell rather than being passed
in as the first argument. Now all unsafe characters are escaped using
"git rev-parse --sq-quote"
[ew: switched from "\Q..\E" to "rev-parse --sq-quote"]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.3-grep-relative-up:
grep: accept relative paths outside current working directory
grep: fix exit status if external_grep() punts
Conflicts:
t/t7002-grep.sh
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
"git grep" would barf at relative paths pointing outside the current
working directory (or subdirectories thereof). Use quote_path_relative(),
which can handle such cases just fine.
[jc: added tests.]
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the coloring logic processed the patch output one line at a time, we
couldn't easily color code the new blank lines at the end of file.
Reuse the adds_blank_at_eof() function to find where the runs of such
blank lines start, keep track of the line number in the preimage while
processing the patch output one line at a time, and paint the new blank
lines that appear after that line to implement this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" logic used to share the same issue as the one fixed for
"git apply" earlier in this series, in that a patch that adds new blank
lines at end could appear as
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. Instead of looking at
each line in the patch in the callback, simply count the blank lines from
the end in two versions, and notice the presence of new ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" code used to conflate trailing-space whitespace error
class with this, but now we have a proper separate error class, we should
check it under blank-at-eof, not trailing-space.
The whitespace error is not about _having_ blank lines at end, but about
adding _new_ blank lines. To keep the message consistent with what is
given by "git apply", call whitespace_error_string() to generate it,
instead of using a hardcoded custom message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace error of adding blank lines at the end of file should
trigger if you added a non-empty line at the end, if the contents of the
line is full of whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command tries to strip blank lines at the end of the file added by a
patch. It is done by first detecting if a hunk in patch has additional
blank lines at the end of itself, and if so checking if such a hunk
applies at the end of file. This patch addresses a bug in the logic to
implement the former (the previous one addressed a bug in the latter).
If the original ends with blank lines, often the patch hunk ends like
this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. This example patch adds
three trailing blank lines, but the code fails to notice it, because it
only pays attention to added blank lines at the very end of the hunk. In
this example, the three added blank lines do not appear textually at the
end in the patch, even though you can see that they are indeed added at
the end, if you rearrange the diff like this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
_$
_$
+$
+$
+$
The fix is not to reset the number of (candidate) added blank lines at the
end when the loop sees a context line that is empty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b94f2ed (builtin-apply.c: make it more line oriented, 2008-01-26) broke
the logic used to detect if a hunk adds blank lines at the end of the
file. With the new code after that commit:
- img holds the contents of the file that the hunk is being applied to;
- preimage has the lines the hunk expects to be in img; and
- postimage has the lines the hunk wants to update the part in img that
corresponds to preimage with.
and we need to compare if the last line of preimage (not postimage)
matches the last line of img to see if the hunk applies at the end of the
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/approxidate:
fix approxidate parsing of relative months and years
tests: add date printing and parsing tests
refactor test-date interface
Add date formatting and parsing functions relative to a given time
Further 'approxidate' improvements
Improve on 'approxidate'
Conflicts:
date.c
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
These were broken by b5373e9. The problem is that the code
marks the month and year with "-1" for "we don't know it
yet", but the month and year code paths were not adjusted to
fill in the current time before doing their calculations
(whereas other units follow a different code path and are
fine).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, there was no coverage of relative date printing
or approxidate parsing routines (mainly because we had no
way of faking the "now" time for relative date calculations,
which made consistent testing impossible).
This new script tries to exercise the basic features of
show_date and approxidate. Most of the tests are just "this
obvious thing works" to prevent future regressions, with a
few exceptions:
- We confirm the fix in 607a9e8 that relative year/month
dates in the latter half of a year round correctly.
- We confirm that the improvements in b5373e9 and 1bddb25
work.
- A few tests are marked to expect failure, which are
regressions recently introduced by the two commits
above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is no longer used since 54bc13c (t8005: Nobody writes Russian in
shift_jis, 2009-06-18).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
Some platforms (IRIX 6.5, Solaris 7) do not provide the 'yes' utility.
Currently, some tests, including t7610 and t9001, try to call this program.
Due to the way the tests are structured, the tests still pass even though
this program is missing. Rather than succeeding by chance, let's provide
an implementation of the simple 'yes' utility in shell for all platforms to
use.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new test file, t9501, that checks HTTP status codes and messages
from gitweb.
Currently, the only tests are for the snapshot feature.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To accommodate additions to the test cases for gitweb, the preamble
from t9500 is now in its own library so that new sets of tests for
gitweb can use the same setup without copying the code.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
This teaches mailinfo the scissors -- >8 -- mark; the command ignores
everything before it in the message body.
For lefties among us, we also support -- 8< -- ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
When checkout sees that HEAD points to a non-existent ref,
it currently acts as if "-f" was given; this behavior dates
back to 5a03e7f, which enabled checkout from unborn branches
in the shell version of "git-checkout". The reasoning given
is to avoid the code path which tries to merge the tree
contents. When checkout was converted to C, this code
remained intact.
The unfortunate side effect of this strategy is that the
"force" code path will overwrite working tree and index
state that may be precious to the user. Instead of enabling
"force", this patch uses the normal "merge" codepath for an
unborn branch, but substitutes the empty tree for the "old"
commit.
This means that in the absence of an index, any files in the
working tree will be treated as untracked files, and a
checkout which would overwrite them is aborted. Similarly,
any paths in the index will be merged with an empty entry
as the base, meaning that unless the new branch's content is
identical to what's in the index, there will be a conflict
and the checkout will be aborted.
The user is then free to correct the situation or proceed
with "-f" as appropriate.
This patch also removes the "warning: you are on a branch
yet to be born" message. Its function was to warn the user
that we were enabling the "-f" option. Since we are no
longer doing that, there is no reason for the user to care
whether we are switching away from an unborn branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all refs sent by the remote repo during a fetch are reachable
locally, then no further conversation is performed with the remote. This
check is skipped when the --depth argument is provided to allow the
deepening of a shallow clone which corresponding remote repo has no
changed.
However, some additional filtering was added in commit c29727d5 to
remove those refs which are equal on both sides. If the remote repo has
not changed, then the list of refs to give the remote process becomes
empty and simply attempting to deepen a shallow repo always fails.
Let's stop being smart in that case and simply send the whole list over
when that condition is met. The remote will do the right thing anyways.
Test cases for this issue are also provided.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests help make sure graph_is_interesting() is doing the right
thing.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way sparse checkout works, users may empty their worktree
completely, because of non-matching sparse-checkout spec, or empty
spec. I believe this is not desired. This patch makes Git refuse to
produce such worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds index as a prerequisite for directory listing (with
exclude). At the moment directory listing is used by "git clean",
"git add", "git ls-files" and "git status"/"git commit" and
unpack_trees()-related commands. These commands have been
checked/modified to populate index before doing directory listing.
add_excludes_from_file() does not enable this feature, because it
is used to read .git/info/exclude and some explicit files specified
by "git ls-files".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This part is mainly to remove CE_VALID shortcuts (and as a
consequence, ce_uptodate() shortcuts as it may be turned on by
CE_VALID) in writing code path if skip-worktree is used. Various tests
are added to avoid future breakages.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: turn on --cached for files that is marked skip-worktree
ls-files: do not check for deleted file that is marked skip-worktree
update-index: ignore update request if it's skip-worktree, while still allows removing
diff*: skip worktree version
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detail about this bit is in Documentation/git-update-index.txt.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes tentative "git stat" and make it take over "git status".
There are some tests that expect "git status" to exit with non-zero status
when there is something staged. Some tests expect "git status path..." to
show the status for a partial commit.
For these, replace "git status" with "git commit --dry-run". For the
ones that do not attempt a dry-run of a partial commit that check the
output from the command, check the output from "git status" as well, as
they should be identical.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reset without argument displays a summary of the local modification,
like this:
$ git reset
Makefile: locally modified
Some people have problems with this; they look like an error message.
This patch makes its output mimic how "git checkout $another_branch"
reports the paths with local modifications. "git add --refresh --verbose"
is changed in the same way.
It also adds a header to make it clear that the output is informative,
and not an error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* bc/mailsplit-cr-at-eol:
Allow mailsplit (and hence git-am) to handle mails with CRLF line-endings
builtin-mailsplit.c: remove read_line_with_nul() since it is no longer used
builtin-mailinfo,builtin-mailsplit: use strbufs
strbuf: add new function strbuf_getwholeline()
Previously, graph_is_interesting() did not behave quite the same way as
the code in get_revision(). As a result, it would sometimes think
commits were uninteresting, even though get_revision() would return
them. This resulted in incorrect lines in the graph output.
This change creates a get_commit_action() function, which
graph_is_interesting() and simplify_commit() both now use to determine
if a commit will be shown. It is identical to the old simplify_commit()
behavior, except that it never calls rewrite_parents().
This problem was reported by Santi Béjar. The following command
would exhibit the problem before, but now works correctly:
git log --graph --simplify-by-decoration --oneline v1.6.3.3
Previously git graph did not display the output for this command
correctly between f29ac4f and 66996ec, among other places.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We skip t7407 because a patch series is cooking that uses is.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The substring expansion notation is a bashism that we have not so far
adopted. Use 'git rev-parse --short' instead, as this also handles
the case where the unique abbreviation is longer than 7 characters.
Also fix the typo; the object name for submodule #2 was copied from
submodule #1's by mistake.
Suggested-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add verification of the behaviour of '$name' to the git submodule
foreach selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The selftest verifies that:
- only checked out submodules are visited by 'git submodule foreach'
- the $path, and $sha1 variables are set correctly for each submodule
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And then unescape them when writing to $GIT_CONFIG.
SVN has different rules for repository URLs (usually the root)
and for paths within that repository (below the HTTP layer).
Thus, for the request URI path at the HTTP level, the URI needs
to be encoded. However, in the body of the HTTP request (the
with underlying SVN XML protocol), those paths should not be
URI-encoded[1]. For non-HTTP(S) requests, SVN appears to be
more flexible and will except weird characters in the URL as
well as URI-encoded ones.
Since users are used to using URLs being entirely URI-encoded,
git svn will now attempt to unescape the path portion of URLs
while leaving the actual repository URL untouched.
This change will be reflected in newly-created $GIT_CONFIG files
only. This allows users to switch between svn(+ssh)://, file://
and http(s):// urls without changing the fetch/branches/tags
config keys. This won't affect existing imports at all (since
things didn't work before this commit anyways), and will allow
users to force escaping into repository paths that look like
they're escaped (but are not).
Thanks to Mike Smullin for the original bug report and Björn
Steinbrink for summarizing it into testable cases for me.
[1] Except when committing copies/renames, see
commit 29633bb91c
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are all backed by git-add--interactive.perl under the hood.
Signed-off-by: Jeff King <peff@peff.net>
Acked-By: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly
removes old installed documents when the target directory has a leading
path that is a symlink. It turns out that "checkout-index --prefix" was
broken by recent b6986d8 (git-checkout: be careful about untracked
symlinks, 2009-07-29).
I suspect has_symlink_leading_path() could learn the third parameter
(prefix that is allowed to be symlinked directories) to allow us to retire
a similar function has_dirs_only_path().
Another avenue of fixing this I considered was to get rid of base_dir and
base_dir_len from "struct checkout", and instead make "git checkout-index"
when run with --prefix mkdir the leading path and chdir in there. It
might be the best longer term solution to this issue, as the base_dir
feature is used only by that rather obscure codepath as far as I know.
But at least this patch should fix this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading the index into an empty file has been broken by
5a56da5806, since it causes the existing
index to always be loaded first, and dies if it's an empty file:
$ GIT_INDEX_FILE=`mktemp` git read-tree master
fatal: index file smaller than expected
It breaks for instance committing from git.el. This patch reverts to the
previous behavior of only loading the index when merging it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for {reset,commit,stash} -p will frequently have to set both
worktree and index states to known values, and verify that the outcome
(again both worktree and index) are what was expected.
Add a small helper library that lets us do these tasks more easily.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-objects is run under the --strict option, objects that have
pointers to other objects are verified for the reachability at the end, by
calling check_object() on each of them, and letting check_object to walk
the reachable objects from them using fsck_walk() recursively.
The function however misunderstands the semantics of fsck_walk() function
when it makes a call to it, setting itself as the callback. fsck_walk()
expects the callback function to return a non-zero value to signal an
error (negative value causes an immediate abort, positive value is still
an error but allows further checks on sibling objects) and return zero to
signal a success. The function however returned 1 on some non error
cases, and to cover up this mistake, complained only when fsck_walk() did
not detect any error.
To fix this double-bug, make the function return zero on all success
cases, and also check for non-zero return from fsck_walk() for an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion ignores all blank lines in svn:ignore properties. The old
git-svn code ignored blank lines everywhere except for the first line
of the svn:ignore property. This patch makes the "git svn
show-ignore" and "git svn create-ignore" commands ignore leading blank
lines, too.
Also include leading blank lines in the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
It was probably intended for the test to fail unless all of the
commands succeed.
[ew: fixed tests to actually work]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Previously when merging directly from a local tracking
branch like:
git merge origin/master
The merge message said:
Merge commit 'origin/master'
* commit 'origin/master':
...
Instead, let's be more explicit about what we are merging:
Merge remote branch 'origin/master'
* origin/master:
...
We accomplish this by recognizing remote tracking branches
in git-merge when we build the simulated FETCH_HEAD output
that we feed to fmt-merge-msg.
In addition to a new test in t7608, we have to tweak the
expected output of t3409, which does such a merge.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have both a tag and a branch named "foo", then calling
"git merge foo" will warn about the ambiguous ref, but merge
the tag.
When generating the commit message, though, we simply
checked whether "refs/heads/foo" existed, and if it did,
assumed it was a branch. This led to the statement "Merge
branch 'foo'" in the commit message, which is quite wrong.
Instead, we should use dwim_ref to find the actual ref used,
and describe it appropriately.
In addition to the test in t7608, we must also tweak the
expected output of t4202, which was accidentally triggering
this bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git merge $X", we automatically generate a
commit message containing something like "Merge branch
'$X'". This test script checks that those messages say what
they should, and exposes a failure when merging a refname
that is ambiguous between a tag and a branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests generate a large amount of I/O activity creating
and destroying repositories and files. We can improve the
time it takes to run the test suite by creating trash
directories on filesystems with better performance
characteristic, even though we may not want the rest of the
git repository on those filesystems (e.g., because they are
not network connected, or because they are temporary
ramdisks).
For example, on a dual processor system:
$ cd t && time make -j32
real 1m51.562s
user 0m59.260s
sys 1m20.933s
# /dev/shm is tmpfs
$ cd t && time make -j32 GIT_TEST_OPTS="--root=/dev/shm"
real 1m1.484s
user 0m53.555s
sys 1m5.264s
We almost halve the wall clock time, and we utilize the
dual processors much better.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most scripts don't care about the absolute path to the trash
directory. The one exception was t4014 script, which pieced
together $TEST_DIRECTORY and $test itself to get an absolute
directory.
Instead, let's provide a $TRASH_DIRECTORY which specifies
the same thing. This keeps the $test variable internal to
test-lib.sh and paves the way for trash directories in other
locations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for correct permissions after init created a deep directory
must be guarded by POSIXPERM. But testing that the deep dirctory exists
is good even on platforms that do not provide the POSIXPERM prerequiste.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, grep fails because it does not find the file
instead of because it does not find the text in the file.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path is unmerged in the index, we used to always say "unmerged" in
the "Changed but not updated" section, even when the path was deleted in
the work tree.
Remove unmerged entries from the "Updated" section, and create a new
section "Unmerged paths". Describe how the different stages conflict
in more detail in this new section.
Note that with the current 3-way merge policy (with or without recursive),
certain combinations of index stages should never happen. For example,
having only stage #2 means that a path that did not exist in the common
ancestor was added by us while the other branch did not do anything to it,
which would have autoresolved to take our addition. The code nevertheless
prepares for the possibility that future merge policies may leave a path
in such a state.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not that uncommon to have mails with DOS line-ending, notably
Thunderbird and web mailers like Gmail (when saving what they call
"original" message). So modify mailsplit to convert CRLF line-endings to
just LF.
Since git-rebase is built on top of git-am, add an option to mailsplit to
be used by git-am when it is acting on behalf of git-rebase, to refrain
from doing this conversion.
And add a test to make sure that rebase still works.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...so that it is easier to reuse it for other tests.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since an earlier change to diff-index by d1f2d7e (Make run_diff_index()
use unpack_trees(), not read_tree(), 2008-01-19), we stopped reporting an
unmerged path that does not exist in the tree, but we should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a branch moves A to B while the other branch created B (or moved C to
B), the code tried to rename one of them to B~something to preserve both
versions, and failed to register temporary resolution for the original
path B at stage#0 during virtual ancestor computation. This left the
index in unmerged state and caused a segfault.
A better solution is to merge these two versions of B's in place and use
the (potentially conflicting) result as the intermediate merge result in
the virtual ancestor.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the case where an untracked symlink that points at a directory
with tracked paths confuses the checkout logic, demostrated in t6035.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
longest_path_match() in symlinks.c does exactly what it's name says,
but in some cases that match can be too long, since the
has_*_leading_path() functions assumes that the match will newer be as
long as the name string given to the function.
fix this by adding an extra if test which checks if the match length
is equal to the 'len' parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test creates two directories, a/b and a/b-2, then replaces a/b with
a symlink to a/b-2, then merges that change into the 'baseline' commit,
which contains an unrelated change.
There are two bugs:
1. 'git checkout' incorrectly deletes work tree file a/b-2/d.
2. 'git merge' incorrectly deletes work tree file a/b-2/d.
The test goes on to create another branch in which a/b-2 is replaced
with a symlink to a/b (i.e., the reverse of what was done the first
time), and merge it into the 'baseline' commit.
There is a different bug:
3. The merge should be clean, but git reports a conflict.
Signed-off-by: James Pickens <james.e.pickens@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/cvsps-tests:
t/t9600: remove exit after test_done
cvsimport: extend testcase about patchset order to contain branches
cvsimport: add test illustrating a bug in cvsps
Add a test of "git cvsimport"'s handling of tags and branches
Add some tests of git-cvsimport's handling of vendor branches
Test contents of entire cvsimported "master" tree contents
Use CVS's -f option if available (ignore user's ~/.cvsrc file)
Start a library for cvsimport-related tests
The problem is that if a file was replaced with a directory containing
another file with the same content and mode, an attempt to merge it
with a branch descended from a commit before this F->D transition will
cause merge-recursive to break. It breaks even if there were no
conflicting changes on that other branch.
Originally reported by Anders Melchiorsen.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the --ignore-whitespace* options have merely meant to tell
the diff output routine that some class of differences are not worth
showing in the textual diff output, so that the end user has easier time
to review the remaining (presumably more meaningful) changes. These
options never affected the outcome of the command, given as the exit
status when the --exit-code option was in effect (either directly or
indirectly).
When you have only whitespace changes, however, you might expect
git diff -b --exit-code
to report that there is _no_ change with zero exit status.
Change the semantics of --ignore-whitespace* options to mean more than
"omit showing the difference in text".
The exit status, when --exit-code is in effect, is computed by checking if
we found any differences at the path level, while diff frontends feed
filepairs to the diffcore engine. When "ignore whitespace" options are in
effect, we defer this determination until the very end of diffcore
transformation. We simply do not know until the textual diff is
generated, which comes very late in the pipeline.
When --quiet is in effect, various diff frontends optimize by breaking out
early from the loop that enumerates the filepairs, when we find the first
path level difference; when --ignore-whitespace* is used the above change
automatically disables this optimization.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git-push refuse pushing into a non-bare repository to update
the current branch by default. To help people who are used to be able to
do this (and later "reset --hard" it in some other way), an error message
is issued when this refusal is triggered, instructing how to resurrect the
old behaviour.
Hosting sites that do not give the users direct access to customize their
repositories (e.g. repo.or.cz, gitorious, github etc.) may further want to
explicitly set the configuration variable to "refuse" for their customers'
repositories.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn gc" will not compress unhandled.log files if
Compress::Zlib is missing. However, leftover index files should
always be removed, so add a test for this behavior as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
This was introduced in 0b2af457a4
("Fix branch detection when repository root is inaccessible")
but reintroduced in the previous commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When starting a new repository, I see my students often say
% git init newrepo
and curse git. They could say
% mkdir newrepo; cd newrepo; git init
but allowing it as an obvious short-cut may be nicer.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second and third tests of this script expected that Russian strings
are converted between ISO-8859-5 and Shift_JIS in the "blame --porcelain"
format output correctly.
Sure, many platforms may convert between such a combination, but that is
only because one of the base character set of Shift_JIS, JIS X 0208,
defines codepoints for Russian characters (among others); I do not think
anybody uses Shift_JIS when seriously writing Russian, and it is perfectly
understandable if iconv() libraries on some platforms fail converting
between this combination, as it does not matter in reality.
This patch changes the test to verify Japanese strings are converted
correctly between EUC-JP and Shift_JIS in the same procedure. The point
of the test is not about verifying the platform's iconv() library, but to
see if "git blame" makes correct iconv() library calls when it should.
We could instead use ISO-8859-5 and KOI8-R as the combination, because
they are both meant to represent Russian, in order to make this test
meaningful on more platforms, but we already use Shift_JIS vs EUC-JP
combinations to test other programs in our test suite, so this combination
is safer from the point of view of the portability. Besides, I do not
read nor write Russian; sorry ;-)
This change allows tests to pass on my (friend's) Solaris 5.11 box.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
735c674 (Trailing whitespace and no newline fix, 2009-07-22) completely
broke --whitespace=fix, causing it to lose all the empty lines in a patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
* av/maint-config-reader:
After renaming a section, print any trailing variable definitions
Make section_name_match start on '[', and return the length on success
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Ka-Hing Cheung for the initial bug report and patch:
> git-svn uses $ra->get_latest_revnum to find out the latest
> revision, but that can be problematic, because get_latest_revnum
> returns the latest revnum in the entire repository, not
> restricted by whatever URL you used to construct $ra. So if you
> do git svn clone -r HEAD svn://blah/blah/trunk, it won't work if
> the latest checkin is in one of the branches (it will try to
> fetch a rev that doesn't exist in trunk, making the clone
> useless).
Relying on SVN::Core::INVALID_REVNUM (-1) as the "start"
argument to SVN::Ra::get_log() proved unreliable with http(s)
URLs so the result of SVN::Ra::get_latest_revnum() is used as
the "start" argument instead.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
Trailing whitespace and no newline fix
diff --cc: a lost line at the beginning of the file is shown incorrectly
combine-diff.c: fix performance problem when folding common deleted lines
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch adds a new line to the end of a file and this line ends with
one trailing whitespace character and has no newline, then
'--whitespace=fix' currently does not remove that trailing whitespace.
This patch fixes this by removing the check for trailing whitespace at
the end of the line at a hardcoded offset which does not take the
eventual absence of newline into account.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combine-diff inspected the diff from one parent to the merge result,
it misinterpreted a header in the form @@ -l,k +0,0 @@.
This hunk header means that K lines were removed from the beginning of the
file, so the lost lines must be queued to the sline that represents the
first line of the merge result, but we incremented our pointer incorrectly
and ended up queuing it to the second line, which in turn made the lossage
appear _after_ the first line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a rebase with --onto, the correct test for whether we can skip
rewriting a commit is if it is already on top of $ONTO, not $UPSTREAM.
Without --onto, this distinction does not exist and the behavior does
not change.
In a situation with two merged branches on a common base X:
X---o---o---o---M
\ /
x---x---x---x
Y
if we try to move the branches from their base on X to be based on Y,
so as to get
X
Y---o'--o'--o'--M'
\ /
x'--x'--x'--x'
then we fail. The command `git rebase -p --onto Y X M` moves only the
first-parent chain, like so:
X
\
x---x---x---x
\
Y---o'--o'--o'--M'
because it mistakenly drops the other branch(es) x---x---x---x from
the TODO file. This tests and fixes this behavior.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some unrelated tests were developed simultaneously and resulted
in test numbers conflicting. To avoid difficulty when referring
to tests via the "tXXXX" convention, rename the newer tests.
Suggested by Marc Branchaud.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
You cannot do a "git pull --rebase" with a rebased upstream, if you have
already run "git fetch". Try to behave as if the "git fetch" was not run.
In other words, find the fork point of the current branch, where
the tip of upstream branch used to be, and use it as the upstream
parameter of "git rebase".
This patch computes the fork point by walking the reflog to find the first
commit which is an ancestor of the current branch. Maybe there are
smarter ways to compute it, but this is a straight forward implementation.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your upstream has rebased you can do:
git pull --rebase
but only if you haven't fetch before.
Mark this case as test_expect_failure, in a later patch it will be
changed to test_expect_success.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --no-walk' sorts commits by commit time whereas 'git show' does
not (it leaves them as given on the command line). Document this by two
tests so that we never forget why ba1d450 (Tentative built-in "git
show", 2006-04-15) introduced it and 8e64006 (Teach revision machinery
about --no-walk, 2007-07-24) exposed it as an option argument.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder tests introduced in fef3a7cc and 54d5cc0e so an intermittent but
unimportant failure on the CVS side related to the former does not interfere
with what is actually being tested.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Tommy Nordgren <tommy.nordgren@comhem.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 650d30d8a1.
Some mailing lists are configured add prefix "[listname] " to all their
messages, and also people hand-edit subject lines, be it an output from
format-patch or a patch generated by some other means.
We cannot stop people from mucking with the subject line, and with the
change, there always will be need for hand editing the subject when that
happens. People have depended on the leading [bracketed string] removal.
For the case of multiple projects sharing a single SVN repository, it is
common practice to create the standard SVN directory layout within a
subdirectory for each project. In such setups, access control is often
used to limit what projects a given user may access. git-svn failed to
detect branches (e.g. when passing --stdlayout to clone) because it
relied on having access to the root directory in the repository. This
patch solves this problem by making git-svn use paths relative to the
given repository URL instead of the repository root.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Unified context patch generated by GNU diff has UNIX epoch timestamp
on the side that does not exist when the patch is about a creation or
a deletion event. Notice this convention when reading a non-git diff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
quickfetch() calls rev-list to check whether the objects we are about to
fetch are already present in the repo (if so, we can skip the object fetch).
However, when there are many (~1000) refs to be fetched, the rev-list
command line grows larger than the maximum command line size on some systems
(32K in Windows). This causes rev-list to fail, making quickfetch() return
non-zero, which unnecessarily triggers the transport machinery. This somehow
causes fetch to fail with an exit code.
By using the --stdin option to rev-list (and feeding the object list to its
standard input), we prevent the overflow of the rev-list command line,
which causes quickfetch(), and subsequently the overall fetch, to succeed.
However, using rev-list --stdin is not entirely straightforward: rev-list
terminates immediately when encountering an unknown object, which can
trigger SIGPIPE if we are still writing object's to its standard input.
We therefore temporarily ignore SIGPIPE so that the fetch process is not
terminated.
The patch also contains a testcase to verify the fix (note that before
the patch, the testcase would only fail on msysGit).
Signed-off-by: Johan Herland <johan@herland.net>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Improved-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
git-format-patch prepends patches with a [PATCH x/n] prefix, but
mailinfo used to remove any number of square-bracket pairs and
the content between them. This prevents one from using a commit
subject like this:
[ and ] must be allowed as input
Removing the square bracket pair from this rather clumsily
constructed subject line loses important information, so we must
take care not to.
This patch causes the subject stripping to stop after it has
encountered one pair of square brackets.
One possible downside of this patch is that the patch-handling
programs will now fail at removing author-added square-brackets
to be removed, such as
[RFC][PATCH x/n]
However, since format-patch only adds one set of square brackets,
this behaviour is quite easily undesrstood and defended while the
previous behaviour is not.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for this change is that system call failures are serious
errors that should be reported to the user, but only few callers took the
burden to decode the error codes that the functions returned into error
messages.
If at all, then only an unspecific error message was given. A prominent
example is this:
$ git upload-pack . | :
fatal: unable to run 'git-upload-pack'
In this example, git-upload-pack, the external command invoked through the
git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to
report the real cause. In fact, this very error message is copied to the
syslog if git-daemon's client aborts the connection early.
With this change, system call failures are reported immediately after the
failure and only a generic failure code is returned to the caller. In the
above example the error is now to the point:
$ git upload-pack . | :
error: git-upload-pack died of signal
Note that there is no error report if the invoked program terminated with
a non-zero exit code, because it is reasonable to expect that the invoked
program has already reported an error. (But many run_command call sites
nevertheless write a generic error message.)
There was one special return code that was used to identify the case where
run_command failed because the requested program could not be exec'd. This
special case is now treated like a system call failure with errno set to
ENOENT. No error is reported in this case, because the call site in git.c
expects this as a normal result. Therefore, the callers that carefully
decoded the return value still check for this condition.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put filenames into the conflict markers only when they are different.
Otherwise they are redundant information clutter.
Print the filename explicitely when warning about a binary conflict.
Signed-off-by: Martin Renold <martinxyz@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The testcases test the new --tag-of-filtered-object option, the output
when limiting what to export by path, and test behavior when no
exact-ref revision is included (e.g. master~8 present on command line
but not master).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c0582c53bc introduced logic to just
omit tags that point to tree objects. However, these objects were still
being output and were pointing at "mark :0", which caused fast-import to
crash. This patch makes sure such tags (including deeper nestings such
as tags of tags of trees), are omitted.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the shell is not specified using the '#!' notation, then the OS will
use '/bin/sh' to execute the script which may not produce the desired
results. In particular, /bin/sh on Solaris interprets '^' specially which
has an effect on the sed command that this patch touches.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4b7cc26 (git-am: use printf instead of echo on user-supplied
strings, 2007-05-25) fixed a bug where subjects with newlines would
cause git-am to echo multiple lines when it says "Applying: <subject>".
This test ensures that fix stays valid.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to include only the modified and typechanged directories
in the ouptut, but for consistency's sake, we should also include
added and removed ones as well.
This makes the output more consistent, but it may break existing scripts
that expect to see the current output which has long been the established
behaviour.
Signed-off-by: Nick Edelen <sirnot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
* rc/http-push: (22 commits)
http*: add helper methods for fetching objects (loose)
http*: add helper methods for fetching packs
http: use new http API in fetch_index()
http*: add http_get_info_packs
http-push.c::fetch_symref(): use the new http API
http-push.c::remote_exists(): use the new http API
http.c::http_fetch_ref(): use the new http API
transport.c::get_refs_via_curl(): use the new http API
http.c: new functions for the http API
http: create function end_url_with_slash
http*: move common variables and macros to http.[ch]
transport.c::get_refs_via_curl(): do not leak refs_url
Don't expect verify_pack() callers to set pack_size
http-push: do not SEGV after fetching a bad pack idx file
http*: copy string returned by sha1_to_hex
http-walker: verify remote packs
http-push, http-walker: style fixes
t5550-http-fetch: test fetching of packed objects
http-push: fix missing "#ifdef USE_CURL_MULTI" around "is_running_queue"
http-push: send out fetch requests on queue
...
* 'cc/bisect' (early part):
t6030: test skipping away from an already skipped commit
bisect: when skipping, choose a commit away from a skipped commit
bisect: add parameters to "filter_skipped"
bisect: display first bad commit without forking a new process
bisect: drop unparse_commit() and use clear_commit_marks()
Using a PRNG (pseudo random number generator) with a bias should be better
than alternating between 3 fixed ratios.
In repositories with many untestable commits it should prevent alternating
between areas where many commits are untestable. The bias should favor
commits that can give more information, so that the bisection process
should not loose much efficiency.
HPA suggested to use a PRNG and found that the best bias is to raise a
ratio between 0 and 1 given by the PRNG to the power 1.5.
An integer square root function is implemented to avoid including
<math.h> and linking with -lm.
A PRNG function is implemented to get the same number sequence on
different machines as suggested by "man 3 rand".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach builtin remote to show push urls also when asked to
"show" a specific remote.
This improves upon the standard display mode: multiple specified "url"s
mean that the first one is for fetching, all are used for pushing. We
make this clearer now by displaying the first one prefixed with "Fetch
URL", and all "url"s (or, if present, all "pushurl"s) prefixed with
"Push URL".
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl (URL part only):
* remote one
Fetch URL: hostone.com:/somepath/repoone.git
Push URL: hostone.com:/somepath/repoone.git
* remote two
Fetch URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwobackup.com:/somewheresafe/repotwo.git
* remote three
Fetch URL: http://hostthree.com/otherpath/repothree.git
Push URL: hostthree.com:/pathforpushes/repothree.git
Also, adjust t5505 accordingly and make it test for the new output.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
An earlier commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) broke logic to set up threading
information for the next message by rewriting "!" to "not" without
understanding the precedence rules of the language.
Namely,
! defined $reply_to || length($reply_to) == 0
was changed to
not defined $reply_to || length($reply_to) == 0
which is
not (defined $reply_to || length($reply_to) == 0)
and different from what was intended, which is
(not defined $reply_to) || (length($reply_to) == 0)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 3e0c4ff (send-email: respect in-reply-to regardless of
threading, 2009-03-01) the variable $thread was only used for prompting
for an "In-Reply-To", but not for controlling whether the "In-Reply-To"
and "References" fields should be written into the email.
Thus these fields were always used beginning with the second mail and it
was not possible to produce non-threaded mails anymore.
However, a later commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) introduced a regression with the
side effect to make non-threaded mails possible again, but only when
--no-chain-reply-to was used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand get_remote_merge_branch to compute the tracking branch to merge
when called without arguments (or only the remote name). This allows
"git pull --rebase" without arguments (default upstream branch) to
work with a rebased upstream. With explicit arguments it already worked.
Also add a test to check for this case.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Offload object enumeration in upload-pack to pack-objects, but fall
back on internal revision walker for shallow interaction. Aside from
architecturally making more sense, this also leaves the door open for
pack-objects to employ a revision cache mechanism. Test t5530 updated
in order to explicitly check both enumeration methods.
Signed-off-by: Nick Edelen <sirnot@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check whether the new remote.${remotename}.pushurl setting is obeyed
and whether it overrides remote.${remotename}.url.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, requests for remote files were simply added to the queue
(pointed to by request_queue_head) and no transfer actually takes
place (the fill function add_fill_function() is not added until line
2441), even though code that followed may rely on these remote files to
be present (eg. the setup_revisions invocation).
The code that sends out the requests on the request queue is refactored
into the method run_request_queue.
After the get_dav_remote_heads invocation (ie. after fetch requests are
added to the queue), the requests on the queue are sent out through an
invocation to run_request_queue.
This invocation to run_request_queue entails adding a fill function
before pushing checks take place, which may lead to accidental,
unwanted pushes previously.
The flag is_running_queue is introduced to prevent this from occurring.
fill_active_slot is made to check the flag is_running_queue before
the sending of the requests proceeds.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).
If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question. Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).
Noticed by Ben Willard.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
Previously, die() would report the exit code of stop_httpd. Instead,
save and reset the exit code before dying.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following is an easy mistake to make for users coming from version
control systems with an "update and commit"-style workflow.
1. git pull
2. resolve conflicts
3. git pull
Step 3 overrides MERGE_HEAD, starting a new merge with dirty index.
IOW, probably not what the user intended. Instead, refuse to merge
again if a merge is in progress.
Reported-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using something like:
$ git push $there 04a8c^2:master
we need to parse 04a8c to find its second parent and then start
discussing what object to send with the other end. "04a8c^2" is a direct
user input and should mean the same commit as git show "04a8c^2" would
give the user, so it obviously needs to obey the replace rules (making
04a8c parsed), but the object transfer should not look at replace at all.
This patch adds some tests to check that the above is working well.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the syntax: "git replace <object> <replacement>", so that
"git replace" can now create replace refs. These replace refs
will be used by read_sha1_file to substitute <object> with
<replacement> for most of the commands.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new "read_replace_refs" global variable is set to 1 by
default, so that replace refs are used by default. But
reachability traversal and packing commands ("cmd_fsck",
"cmd_prune", "cmd_pack_objects", "upload_pack",
"cmd_unpack_objects") set it to 0, as they must work with the
original DAG.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get a "sha1 mismatch" error for replaced objects.
Note that I am not sure at all that this is a good change.
It may be that we should just refuse to tag a replaced object. But
in this case we should probably give a meaningfull error message
instead of "sha1 mismatch".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this patch the setup code is very big, but this will be used in
test cases that will be added later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* ew/svn-test-and-old-i18n:
t8005: fix typo, it's ISO-8859-5, not KOI8-R
t8005: convert CP1251 character set to ISO8859-5
t8005: use more portable character encoding names
t5100: use ancient encoding syntax for backwards compatibility
t9301: use ISO8859-1 rather than ISO-8859-1
t3901: Use ISO8859-1 instead of ISO-8859-1 for backward compatibility
t3901: avoid negation on right hand side of '|'
builtin-mailinfo.c: use "ISO8859-1" instead of "latin1" as fallback encoding
builtin-mailinfo.c: compare character encodings case insensitively
Use 'UTF-8' rather than 'utf-8' everywhere for backward compatibility
t3900: use ancient iconv names for backward compatibility
* 'cc/bisect' (early part):
bisect: check ancestors without forking a "git rev-list" process
commit: add function to unparse a commit and its parents
bisect: rework some rev related functions to make them more reusable
When a path F that matches ignore pattern has a conflict, "git add F"
insisted the -f option be given, which did not make sense. It would have
required -f when the path was originally added, but when resolving a
conflict, it already is tracked.
So this should work (and does):
$ echo file >.gitignore
$ echo content >file
$ git add -f file ;# need -f because we are adding new path
$ echo more content >>file
$ git add file ;# don't need -f; it is not actually an "other" file
This is handled under the hood by the COLLECT_IGNORED option to
read_directory. When that code finds an ignored file, it checks the
index to make sure it is not actually a tracked file. However, the test
it uses does not take into account unmerged entries, and considers them
to still be ignored. "git ls-files" uses a more elaborate test and gets
the right answer and the same test should be used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This resolves a semantic conflicts early to work with 5ae93df (t3900: use
ancient iconv names for backward compatibility, 2009-05-18).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
The test still passes when SVN_HTTPD_PORT is not set. Futhermore, t9115
and t9118 don't check if SVN_HTTPD_PORT is set even though they both use
start_httpd() from lib-git-svn.sh. Admittedly, the test is not very
meaningful without SVN_HTTPD_PORT, as commit f5530b (support for funky
branch and project names over HTTP(S) 2007-11-11) states that the URI
escaping is only done over HTTP(S).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file X is removed from CVS, it goes into the Attic directory, and CVS
reports it as 'no file X' but with status 'Up-to-date'. cvsexportcommit
misinterprets this as an existing file and tries to commit a file with the
same name. Correctly identify these files, so that new files with the
same name can be committed.
Add a test to t9200-git-cvsexportcommit.sh, which tests that we can
re-commit a removed filename which remains in CVS's attic. This adds a
file 'attic_gremlin' in CVS, then "removes" it, then tries to commit a
file with the same name from git.
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...without i18n.commitencoding set in the config.
SVN tries to store all commit messages in UTF-8, however it is
up to the job of the clients to enforce this rule. SVN servers
themselves do not always enforce this; allowing clients to
commit malformed UTF-8 messages and break repositories.
So git-svn will enforce this and tell the user to set
i18n.commitencoding when a git commit is is not in UTF-8.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
In case of an empty list, the search for its tail caused a
NULL-pointer dereference.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Reported-by: Erik Faye-Lund <kusmabite@googlemail.com>
Acked-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code outside of the test harness was emitting "Initializing..." from
git-init. Fixup this test to be more modern:
- test_expect_object_count() and count_objects() are unused
- use grep directly instead of test "..." = $(grep ...)
- end the test_expect_success line with a single-quote and put the
test on a new line
- put as much code inside the test harness as possible
- no_strict_count_check is unused and duplicates the test
"new object count"
- use && whenever possible to catch errors early
- use test_tick instead of GIT_AUTHOR_DATE=$sec
- remove debugging aid log.txt
- use subshells instead of cd-ing around
Also merge the pull test into one large test.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When find-copies-harder is in effect, the diff frontends are expected to
feed all paths, not just changed paths, to the diffcore, so that copy
sources can be picked up. In such a case, not descending into subtrees
using the cache-tree information is simply wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the oldest scripts; update it to match more modern style.
Notably, we should:
- Put the test title on the same line as the "test_expect_success", and
end the line with a single-quote to begin the body of the test which is
one multi-line string; and
- Run as many commands inside test_expect_success, not outside, to catch
unexpected breakages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two tests that are skipped if file modes are not obeyed by the
file system. In this case, the subsequent test failed because the
repository was in an unexpected state. This corrects it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a minimal fix.
OPT_FILENAME is intended to be a more robust fix for the same issue.
OPT_FILENAME and its associated enum OPTION_FILENAME are used to
represent filename options within the parse options API.
This option is similar to OPTION_STRING. If --no is prefixed to the
option the filename is unset. If no argument is given and the default
value is set, the filename is set to the default value. The difference
is that the filename is prefixed with the prefix passed to
parse_options() (or parse_options_start()).
Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use
OPT_FILENAME with their filename options. Also, rename
parse_options_fix_filename() to fix_filename() as it is no longer
extern.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* master: (654 commits)
http-push.c::remove_locks(): fix use after free
t/t3400-rebase.sh: add more tests to help migrating git-rebase.sh to C
post-receive-email: hooks.showrev: show how to include both web link and patch
MinGW: Fix compiler warning in merge-recursive
MinGW: Add a simple getpass()
MinGW: use POSIX signature of waitpid()
MinGW: the path separator to split GITPERLLIB is ';' on Win32
MinGW: Scan for \r in addition to \n when reading shbang lines
gitweb: Sanitize title attribute in format_subject_html
Terminate argv with NULL before calling setup_revisions()
doc/git-rebase.txt: remove mention of multiple strategies
git-send-email: Handle quotes when parsing .mailrc files
git-svn: add --authors-prog option
git-svn: Set svn.authorsfile if it is passed to git svn clone
git-svn: Correctly report max revision when following deleted paths
git-svn: Fix for svn paths removed > log-window-size revisions ago
git-svn testsuite: use standard configuration for Subversion tools
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
...
xdl_merge used to have a check to ensure that there was at least
some change in one or other side being merged but this suppressed
output for the degenerate case when base, local and remote
contents were all identical.
Removing this check enables correct output in the degenerate case
and xdl_free_script handles freeing NULL scripts so there is no
need to have the check for these calls.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that merge-file is passed three files with identical
contents it wipes the contents of the output file instead of
leaving it unchanged.
Althought merge-file is porcelain and this will never happen in
normal usage, it is still wrong.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new tests make sure I don't miss any check being performed before
rebase is proceeded (which is well tested by other tests)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After bol is forwarded, it doesn't represent the beginning of the line
any more. This means that the beginning-of-line marker (^) mustn't match,
i.e. the regex flag REG_NOTBOL needs to be set.
This bug was introduced by fb62eb7fab
("grep -w: forward to next possible position after rejected match").
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) only fixed git-commit and git-tag. But, git-apply and
git-fmt-merge-msg didn't get the update and exhibit the same behavior.
Fix them and add tests for "apply --build-fake-ancestor" and
"fmt-merge-msg -F".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a quick fix for
filename arguments used in the parse options API.
git-commit was still broken. This means
git commit -F log -t temp
in a subdirectory would make git think the log message should be taken
from temp instead of log.
This is because parse_options_fix_filename() calls prefix_filename()
which uses a single static char buffer to do its work. Making two calls
with two char pointers causes the pointers to alias. To prevent
aliasing, we duplicate the string returned by
parse_options_fix_filename().
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On IRIX 6.5 CP1251 is unknown, but WIN1251 (which seems to be a
non-standard name) is known. On Solaris 10, the opposite is true. Solaris
also knows CP1251 as WINDOWS-1251, but this too is not recognized on IRIX.
I could not find a name that both platforms recognized for this character
set.
An alternative character set which covers the same alphabet seems to be the
ISO8859-5 character set. Both platforms support this character set, so use
it instead.
This allows t8005.4 to pass on Solaris 7, and part of the test to pass on
IRIX. (My IRIX can't convert SJIS to UTF-8 :(
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not have an extensive list of alternate names for
character encodings.
Solaris 7 does not know about shift-jis, but does know SJIS. It also does
not know that utf-8 and UTF-8 refer to the same encoding.
With the above in mind, the following conversions were performed:
utf-8 --> UTF-8
shift-jis --> SJIS
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --authors-prog, to git-svn that allows a more flexible
alternative (or supplement) to --authors-file. This allows more
advanced username operations than the authors file will allow. For
example, one may look up Subversion users via LDAP, or may generate the
name and email address from the Subversion username.
Notes:
* If both --authors-name and --authors-prog are given, the former is
tried first, falling back to the later.
* The program is called once per unique SVN username, and the result is
cached.
* The command-line argument must be the path to a program, not a generic
shell command line. The absolute path to this program is taken at
startup since the git-svn script changes directory during operation.
* The option is not enabled for `git svn log'.
[ew: fixed case where neither --authors-(name|prog) were defined]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
I have tweaked configuration in my ~/.subversion directory, namely I am
running auto-properties and automatically adding '$Id$' expansion to
every file. This choke the last test named 'proplist' from
t9101-git-svn-props.sh, because one more property, svn:keywords is
automatically added.
I had just wrapped svn invocation with the svn_cmd that specifies empty
directory via --config-dir argument. Since the latter is the global
option, it should be recognized by all svn subcommands, so no
regressions will be introduced.
Now svn_cmd is used everywhere, not just in the failed test module: this
should guard us from the future clashes with user-defined configuration
tweaks.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
names.
The following conversions were performed:
ISO-8859-1 --> ISO8859-1
ISO-8859-2 --> ISO8859-2
ISO-8859-8 --> ISO8859-8
iso-2022-jp --> ISO-2022-JP
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells do not properly handle constructs of the form:
spew_something | ! process_input
So rewrite this to be:
spew_something | process_input; test $? != 0
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some old iconv implementations do not have many alternate names and/or
do not match character encoding names case insensitively. These
implementations can not tell that utf-8 and UTF-8 are the same encoding
and fail when trying to do the conversion. So use the old names, which
modern implementations still support.
The following conversions were performed:
utf-8 --> UTF-8
ISO-8859-1 --> ISO8859-1
EUCJP --> eucJP
Also update t9129 and t9500 which make use of the test files in t/t3900.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We must save the pending commits that will be used during revision
walking and unparse them after, because we want to leave a clean
state for the next revision walking that will try to find the best
bisection point.
As we don't fork a process anymore to call "git rev-list", we need
to remove the use of GIT_TRACE to check how "git rev-list" is
called from the t6030 test that uses it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
test: checkout shouldn't say that HEAD has moved if it didn't
completion: enhance "current branch" display
completion: simplify "current branch" in __git_ps1()
completion: fix PS1 display during a merge on detached HEAD
builtin-checkout: Don't tell user that HEAD has moved before it has
pre-commit.sample: don't print incidental SHA1
tests: Add tests for missing format-patch long options
api-parse-options.txt: use 'func' instead of 'funct'
Turn on USE_ST_TIMESPEC for OpenBSD
ls-tree manpage: output of ls-tree is compatible with update-index
ls-tree manpage: use "unless" instead of "when ... is not"
An old iconv (GNU libiconv 1.11) does not know about utf8, it does know
UTF-8 though, which is also understood by all newer iconv implementations.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0beee4c6de but with a
bit of twist, as we have added "edit hunk manually" hack and we cannot
rely on the original line numbers of the hunks that were manually edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Splitting a hunk into two in add -p doesn't work for a diff that adds a
new line at the top of the file with other add in the same hunk.
Signed-off-by: Matthew Graham <mdg149@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercise format-patch's --signoff, --in-reply-to and --start-number long
options.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() assumes that upstream references (as specified by
--track or set up automatically) are commits. By calling lookup_commit()
on them, create_objects() creates objects for them with type commit no
matter what their real type is; this disturbs lookup_tag() later on in the
call sequence, leading to git status, git branch -v and git checkout
erroring out.
Fix this by using lookup_commit_reference() instead so that (annotated)
tags can be used as upstream references.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"tag: v1.6.2.5" looks much better than "tag: refs/tags/v1.6.2.5".
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-checkout and git-branch allow setting up an arbitrary committish as
the upstream reference for --track. In particular, tags are allowed. But
they and git-status barf on non-commit upstreams as soon as they are
asked for trackings stats.
Expose this shortcoming by adding two tests: annotated tags are affected
but lightweight tags are OK.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in 83ae209 (checkout branch: prime cache-tree fully,
2009-04-20) is bogus; checkout can switch branches with a dirty
index and in such a case the tree won't match HEAD.
Add t2014-switch to catch this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting from other encodings (e.g. EUC-JP or UTF-8), there are
subtly different variants of ISO-2022-JP, all of which are valid. At the
end of line or when a run of string switches to 1-byte sequence, ESC ( B
can be used to switch to ASCII or ESC ( J can be used to switch to ISO
646:JP (JIS X 0201) but they essentially are the same character set and
are used interchangeably. Similarly the set ESC $ @ switches to (JIS X
0208-1978) and ESC $ B switches to (JIS X 0208-1983) are in practice used
interchangeably.
Depending on the iconv library and the locale definition on the system, a
program that converts from another encoding to ISO-2022-JP can produce
different byte sequence, and GIT_TEST_CMP (aka "diff -u") will report the
difference as a failure.
Fix this by converting the expected and the actual output to UTF-8 before
comparing when the end result is ISO-2022-JP. The test vector string in
t3900/ISO-2022-JP.txt is expressed with ASCII and JIS X 0208-1983, but it
can be expressed with any other possible variant, and when converted back
to UTF-8, these variants produce identical byte sequences.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to allow input lines that point at objects that we do not
have when dealing with submodule entries anyway. This adds an explicit
option to allow missing objects of other types, to be consistent with
the use of --info-only option to the update-index command and --missing-ok
option to the write-tree command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far mktree (which has always been a quick hack) had no test.
At least give it a bit of test coverage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are trying to come up with the final result (i.e. depth=0), you
want to record how the conflict arose by registering the state of the
common ancestor, your branch and the other branch in the index, hence you
want to do update_stages().
When you are merging with positive depth, that is because of a criss-cross
merge situation. In such a case, you would need to record the tentative
result, with conflict markers and all, as if the merge went cleanly, even
if there are conflicts, in order to write it out as a tree object later to
be used as a common ancestor tree.
update_file() calls update_file_flags() with update_cache=1 to signal that
the result needs to be written to the index at stage #0 (i.e. merged), and
the code should not clobber the index further by calling update_stages().
The codepath to deal with rename/delete conflict in a recursive merge
however left the index unmerged.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --reference option to git submodule add and
git submodule update commands, which is passed to git clone.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we only set it to absolute paths in some cases which lead
to problems like wc_chdir not working.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise git will use the current directory as work tree which will
lead to unexpected results if we operate in sub directory of the
work tree.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let a command-line --keep-subject (-k) override a config-specified
format.numbered (--numbered (-n)), rather than provoking the
"-n and -k are mutually exclusive" failure.
* t4021-format-patch-numbered.sh: Test for the above
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for options that don't start with a dash. Initially, they
don't accept arguments and can only be short options, i.e. consist of a
single character.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way to recognize numerical options. The number is passed to
a callback function as a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPTION_NEGBIT and OPT_NEGBIT, mirroring OPTION_BIT and OPT_BIT.
OPT_NEGBIT can be used together with OPT_BIT to define two options
that cancel each other out.
Note: this patch removes the reminder from the test script because
it adds a test for --no-or4 and there already was one for --or4.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX only requires sed to work on text files and MERGE_RR is not a text
file. Some versions of sed complain that this file is not newline
terminated, and exit non-zero. Use perl instead which does not have a
problem with it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines appear to be unnecessary. They set variables which are not
used afterwards. The primary motivation to remove them is that the sed
invocation exits non-zero for seds which require newline termination of
input files.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of sed exit non-zero if the file they are supplied is not
newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. So
rework this test to avoid doing so.
This affects tests t8001-annotate.sh and t8002-blame.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of sed exit non-zero if the file they are supplied is not
newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. In
this case the sed invocation can be avoided entirely since the resulting
file is equivalent to a previously created file. So, just copy that file
into place instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all versions of grep understand backslashed extended regular
expressions. Possibly only gnu grep does.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
improve error message in config.c
t4018-diff-funcname: add cpp xfuncname pattern to syntax test
Work around BSD whose typeof(tv.tv_sec) != time_t
git-am.txt: reword extra headers in message body
git-am.txt: Use date or value instead of time or timestamp
git-am.txt: add an 'a', say what 'it' is, simplify a sentence
dir.c: Fix two minor grammatical errors in comments
git-svn: fix a sloppy Getopt::Long usage
* mk/maint-apply-swap:
tests: make test-apply-criss-cross-rename more robust
builtin-apply: keep information about files to be deleted
tests: test applying criss-cross rename patch
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
We cannot represent the 3-way conflicted state in the work tree
for these entries, but it is normal not to have commit objects
for them in our repository. Just update the index and the life
will be good.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine diff logic knew only about blobs (and their checked-out form
in the work tree, either regular files or symlinks), and barfed when fed
submodules. This "externalizes" gitlinks in the same way as the normal
patch generation codepath does (i.e. "Subproject commit Xxx\n") to fix the
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.1:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.0:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
Trying to be lazy and comparing files with fake-editor.sh to avoid
having to provide another example text does not work well: the blob
name changes when SHELL_PATH changes, and so does the 'index' line
in the diff.
Therefore provide a second example text.
Noticed by Mike Ralphson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test might happen to be the last one in the script, but other people
later may want to add more tests after your test is done.
Do not surprise them by going in a subdirectory to run a part of your test
and never coming out of it. This fixes a162e78 in that respect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While I did a
make -j64 test > ~/t.out
to check my previous patch (in case some test actually tested 'trustctime'
or something), I noticed this one. Somebody has speeling trouble:
t4202-log.sh: line 345: test_expect_sucess: command not found
Fixed thus.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the recent rework of the object listing mechanism of
pack-objects/rev-list, git-repack now properly packs objects from alternate
repositories even when the local repository contains packs.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-thread' option is a Getopt::Long boolean option. The '--no-'
prefix (as in --no-thread) for boolean options is not supported in
Getopt::Long version 2.32 which was released with Perl 5.8.0. This version
only supports '--no' as in '--nothread'. More recent versions of
Getopt::Long, such as version 2.34, support either prefix. So use the older
form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Difftool is written in perl, so we don't build it if NO_PERL
is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --rebase' rebases your local branch on top of what
would have been checked out to a detached HEAD otherwise.
In some cases, detaching the HEAD when updating a submodule complicates
the workflow to commit to this submodule (checkout master, rebase, then
commit). For submodules that require frequent updates but infrequent
(if any) commits, a rebase can be executed directly by the git-submodule
command, ensuring that the submodules stay on their respective branches.
git-config key: submodule.$name.rebase (bool)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use horizontal lines instead of long diagonal lines during the
collapsing state of graph rendering. For example what used to be:
| | | | |
| | | |/
| | |/|
| |/| |
|/| | |
| | | |
is now
| | | | |
| |_|_|/
|/| | |
| | | |
This results in more compact and legible graphs.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An off by one error was causing octopus merges with 3 parents to not be
rendered correctly. This regression was introduced by 427fc5.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend this test to cover the rendering of graphs with octopus merges
and pre_commit lines.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, test_create_repo() expects that templates can be found below
`pwd`/.. This assumption fails when tests are run against a git
installed somewhere else or test_create_repo() is called from
subdirectiories (several tests do this).
Therefore, use $TEST_DIRECTORY as introduced in 2d84e9fb and expect
templates to be present in $TEST_DIRECTORY/.. which should be the root
dir of the git checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-apply-swap:
tests: make test-apply-criss-cross-rename more robust
builtin-apply: keep information about files to be deleted
tests: test applying criss-cross rename patch
Conflicts:
t/t4130-apply-criss-cross-rename.sh
Commit 55f0566 (get_local_heads(): do not return random pointer if
there is no head, 2009-04-17) fixed a segfault for git push, this
patch adds a test-case to avoid future regressions.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I realized that this test does check if git-apply succeeds, but doesn't
tell if it applies patches correctly. So I added test_cmp to check it.
I also added a test which checks swapping three files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally reported by Linus in $gmane/116198
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/maint-fast-export:
builtin-fast-export.c: handle nested tags
builtin-fast-export.c: fix crash on tagged trees
builtin-fast-export.c: turn error into warning
test-suite: adding a test for fast-export with tag variants
When tags that points to tags are passed to fast-export, an error is given,
saying "Tag [TAGNAME] points nowhere?". This fix calls parse_object() on the
object before referencing it's tag, to ensure the tag-info is fully initialized.
In addition, it inserts a comment to point out where nested tags are handled.
This is consistent with the comment for signed tags.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag object points to a tree (or another unhandled type), the commit-
pointer is left uninitialized and later dereferenced. This patch adds a
default case to the switch that issues a warning and skips the object.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ash (used as /bin/sh on many distros) has a shell expansion bug
for the form ${var:+word word}. The result is a single argument
"word word". Work around by using ${var:+word} ${var:+word} or
equivalent.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/archive-attribute:
archive test: attributes
archive: do not read .gitattributes in working directory
unpack-trees: do not muck with attributes when we are not checking out
attr: add GIT_ATTR_INDEX "direction"
archive tests: do not use .gitattributes in working directory
* maint:
Describe fixes since 1.6.2.3
doc/git-daemon: add missing arguments to max-connections option
doc/git-daemon: add missing arguments to options
init: Do not segfault on big GIT_TEMPLATE_DIR environment variable
imap-send: use correct configuration variable in documentation
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
* cb/maint-merge-recursive-submodule-fix:
simplify output of conflicting merge
update cache for conflicting submodule entries
add tests for merging with submodules
* da/difftool:
mergetool--lib: simplify API usage by removing more global variables
Fix misspelled mergetool.keepBackup
difftool/mergetool: refactor commands to use git-mergetool--lib
mergetool: use $( ... ) instead of `backticks`
bash completion: add git-difftool
difftool: add support for a difftool.prompt config variable
difftool: add various git-difftool tests
difftool: move 'git-difftool' out of contrib
difftool/mergetool: add diffuse as merge and diff tool
difftool: add a -y shortcut for --no-prompt
difftool: use perl built-ins when testing for msys
difftool: remove the backup file feature
difftool: remove merge options for opendiff, tkdiff, kdiff3 and xxdiff
git-mergetool: add new merge tool TortoiseMerge
git-mergetool/difftool: make (g)vimdiff workable under Windows
doc/merge-config: list ecmerge as a built-in merge tool
Add a test script for all archive attributes and their handling in
normal and bare repositories. export-ignore and export-subst are
tested, as well as the effect of the option --worktree-attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are interested in using archive mostly from a bare repository, so it
should not add .gitattributes to the work tree.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interpreting a config value, the config parser reads in 1+ space
character(s) and puts -one- space character in the buffer as soon as
the first non-space character is encountered (if not inside quotes).
Unfortunately the buffer size check lacks the extra space character
which gets inserted at the next non-space character, resulting in
a crash with a specially crafted config entry.
The unit test now uses Java to compile a platform independent
.NET framework to output the test string in C# :o)
Read: Thanks to Johannes Sixt for the correct printf call
which replaces the perl invocation.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally reported by Linus in $gmane/116198
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.warnAmbiguousRefs is used to select strict mode for the
abbreviation for the ":short" format specifier of "refname" and "upstream".
In strict mode, the abbreviated ref will never trigger the
'warn_ambiguous_refs' warning. I.e. for these refs:
refs/heads/xyzzy
refs/tags/xyzzy
the abbreviated forms are:
heads/xyzzy
tags/xyzzy
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People sometimes wonder why they cannot apply a patch that only
creates new files to an unborn branch.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/show-upstream:
branch: show upstream branch when double verbose
make get_short_ref a public function
for-each-ref: add "upstream" format field
for-each-ref: refactor refname handling
for-each-ref: refactor get_short_ref function
* fg/remote-prune:
add tests for remote groups
git remote update: Fallback to remote if group does not exist
remote: New function remote_is_configured()
git remote update: Report error for non-existing groups
git remote update: New option --prune
builtin-remote.c: Split out prune_remote as a separate function.
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
This test was added recently (5a688fe, "core.sharedrepository = 0mode"
should set, not loosen; 2009-03-28). It checked the result of a sed
invocation for emptyness, but in some cases it forgot to print anything
at all, so that those checks would never be false.
Due to this mistake, it went unnoticed that the files in objects/info are
not necessarily 0440, but can also be 0660. Because the 0mode setting
tries to guarantee that the files are accessible only to the people they
are meant to be used by, we should only make sure that they are readable
by the user and the group when the configuration is set to 0660. It is a
separate matter from the core.shredrepository settings that w-bit from
immutable object files under objects/[0-9a-f][0-9a-f] directories should
be dropped.
COMMIT_EDITMSG is still world-readable, but it (and any transient files
that are meant for repositories with a work tree) does not matter. If you
are working on a shared machine and on a sekrit stuff, the root of the
work tree would be with mode 0700 (or 0750 to allow peeking by other
people in the group), and that would mean that .git/COMMIT_EDITMSG in such
a repository would not be readable by the strangers anyway.
Also, in the real-world use case, .git/COMMIT_EDITMSG will be given to an
arbitrary editor the user happens to use, and we have no guarantee what it
does (e.g. it may create a new file with umask and replace, it may rewrite
in place, it may leave an editor backup file but use umask to create it,
etc.), and the protection of the file lies majorly on the protection of
the root of the work tree.
This test cannot be run on Windows; it requires POSIXPERM when merged to
'master'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git add -e [<files>]", Git will fire up an editor with the current
diff relative to the index (i.e. what you would get with "git diff
[<files>]").
Now you can edit the patch as much as you like, including adding/removing
lines, editing the text, whatever. Make sure, though, that the first
character of the hunk lines is still a space, a plus or a minus.
After you closed the editor, Git will adjust the line counts of the hunks
if necessary, thanks to the --recount option of apply, and commit the
patch. Except if you deleted everything, in which case nothing happens
(for obvious reasons).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignored-paths argument is now stored as
"svn-remote.$REMOTE_NAME.ignore-paths" in the config file.
[ew: edited subject and message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The --ignore-paths option to fetch is very useful for working on a subset
of a SVN repository. For proper operation, every command that causes a
fetch (explicit or implied) must include a matching --ignore-paths option.
This patch adds a persistent svn-remote.$repo_id.ignore-paths config by
promoting Fetcher::is_path_ignored to a member function and initializing
$self->{ignore_regex} in Fetcher::new. Command line --ignore-paths is
still recognized and acts in addition to the config value.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This tries to systematically cover existing behavior, and
also mark some expect_failure cases for desired behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Conflicts:
t/t7700-repack.sh
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for determining the upstream ref of a branch is
somewhat complex to perform in a shell script. This patch
provides a plumbing mechanism for scripts to access the C
logic used internally by git-status, git-branch, etc.
For example:
$ git for-each-ref \
--format='%(refname:short) %(upstream:short)' \
refs/heads/
master origin/master
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Change double quotes to single quotes in message
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Conflicts:
Documentation/git-checkout.txt
Most of the time when we give branch name in the message, we quote it
inside a pair of single-quotes. git-checkout uses double-quotes; this
patch corrects the inconsistency.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
* cb/maint-merge-recursive-submodule-fix:
simplify output of conflicting merge
update cache for conflicting submodule entries
add tests for merging with submodules
difftool now supports difftool.prompt so that users do not have to
pass --no-prompt or hit enter each time a diff tool is launched.
The --prompt flag overrides the configuration variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7800-difftool.sh tests the various command-line flags,
git-config variables, and environment settings supported by
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
This patch adds some tests to check that "git bisect" works fine when
passing paths to "git bisect start" to reduce the number of
bisection steps.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging merge bases during a recursive merge we do not want to
leave any unmerged entries. Otherwise we cannot create a temporary
tree for the recursive merge to work with.
We failed to do so in case of a submodule conflict between merge
bases, causing a NULL pointer dereference in the next step of the
recursive merge.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 (send-email: refactor and ensure prompting doesn't loop
forever) introduced an ask function, which unfortunately had a nasty
bug. This caused it not to accept anything but the default reply to the
"Who should the emails appear to be from?" prompt, and nothing but
ctrl-d to the "Who should the emails be sent to?" and "Message-ID to be
used as In-Reply-To for the first email?" prompts.
This commit corrects the issues and adds a test to confirm the fix.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'git checkout <submodule>' should not update the submodule's
working directory, it should update the index. This is in line with
how submodules are handled in the rest of Git.
While at it, test 'git reset [<commit>] <submodule>', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sanitize_address assumes that quoted addresses (e.g., "first last"
<first.last@example.com) do not need rfc2047 encoding, but this is
not always the case.
For example, various places in send-email extract addresses using
parse_address_line. parse_address_line returns the addresses already
quoted (e.g., "first last" <first.last@example.com), but not rfc2047
encoded.
This patch makes sanitize_address stricter about what needs rfc2047
encoding and adds a test demonstrating where I noticed the problem.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c18f75a (send-email: add tests for refactored prompting, 2009-03-28)
added two tests which went interactive under the dash shell.
This patch corrects the issue, reported by Björn Steinbrink.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/fast-export:
builtin-fast-export.c: handle nested tags
builtin-fast-export.c: fix crash on tagged trees
builtin-fast-export.c: turn error into warning
test-suite: adding a test for fast-export with tag variants
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
Previously the code did a simple prefix match, which means that a path in
a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the code did a simple prefix match, which means that a
path in a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that local branches, when followed using --track, behave
the same as remote ones (e.g. differences being reported by git status
and git checkout). This fixes 1 known failure.
The fix is done within branch_get(): The first natural candidate,
namely remote_find_tracking(), does not have all the necessary info
because in general there is no remote struct for '.', and we don't want
one because it would show up in other places as well.
branch_get(), on the other hand, has access to merge_names[] (in
addition to merge[]) and therefore can set up the followed branch
easily.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 made the "Send this email?" prompt assume yes if confirm
= "inform" when it was unable to get a valid response. However, the
"yes" assumption only worked correctly for the first email. This commit
fixes the issue and confirms the fix by modifying the existing test for
the prompt to send multiple emails.
Reported by Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the aspects of the test checked explicitly for the
g+s bit to be set on created directories. However, this is
only the means to an end (the "end" being having the correct
group set). And in fact, on systems where
DIR_HAS_BSD_GROUP_SEMANTICS is set, we do not even need to
use this "means" at all, causing the test to fail.
This patch removes that part of the test. In an ideal world
it would be replaced by a test to check that the group was
properly assigned, but that is difficult to automate because
it requires the user running the test suite be a member of
multiple groups.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
