Change various cmd_* functions that claim to return an "int" to use
"return" instead of exit() to indicate an exit code. These were not
marked with NORETURN, and by directly exit()-ing we'll skip the
cleanup git.c would otherwise do (e.g. closing fd's, erroring if we
can't). See run_builtin() in git.c.
In the case of shell.c and sh-i18n--envsubst.c this was the result of
an incomplete migration to using a cmd_main() in 3f2e2297b9 (add an
extra level of indirection to main(), 2016-07-01).
This was spotted by SunCC 12.5 on Solaris 10 (gcc210 on the gccfarm).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Way back in f9b8908b (commit.c: use generation numbers for
in_merge_bases(), 2018-05-01), a heuristic was used to short-circuit
the in_merge_bases() walk. This works just fine as long as the
caller is checking only two commits, but when there are multiple,
there is a possibility that this heuristic is _very wrong_.
Some code moves since then has changed this method to
repo_in_merge_bases_many() inside commit-reach.c. The heuristic
computes the minimum generation number of the "reference" list, then
compares this number to the generation number of the "commit".
In a recent topic, a test was added that used in_merge_bases_many()
to test if a commit was reachable from a number of commits pulled
from a reflog. However, this highlighted the problem: if any of the
reference commits have a smaller generation number than the given
commit, then the walk is skipped _even if there exist some with
higher generation number_.
This heuristic is wrong! It must check the MAXIMUM generation number
of the reference commits, not the MINIMUM.
This highlights a testing gap. t6600-test-reach.sh covers many
methods in commit-reach.c, including in_merge_bases() and
get_merge_bases_many(), but since these methods either restrict to
two input commits or actually look for the full list of merge bases,
they don't check this heuristic!
Add a possible input to "test-tool reach" that tests
in_merge_bases_many() and add tests to t6600-test-reach.sh that
cover this heuristic. This includes cases for the reference commits
having generation above and below the generation of the input commit,
but also having maximum generation below the generation of the input
commit.
The fix itself is to swap min_generation with a max_generation in
repo_in_merge_bases_many().
Reported-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d91d6fbf26 (commit-reach: create repo_is_descendant_of(), 2020-06-17)
adds a repository aware version of is_descendant_of() and a backward
compatibility shim that is barely used.
Update all callers to directly use the new repo_is_descendant_of()
function instead; making the codebase simpler and pushing more
the_repository references higher up the stack.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_reachable_subset() method returns the list of commits in
the 'to' array that are reachable from at least one commit in the
'from' array. Add tests that check this method works in a few
cases:
1. All commits in the 'to' list are reachable. This exercises the
early-termination condition.
2. Some commits in the 'to' list are reachable. This exercises the
loop-termination condition.
3. No commits in the 'to' list are reachable. This exercises the
NULL return condition.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flag() algorithm was refactored in 4fbcca4e
"commit-reach: make can_all_from_reach... linear" but incorrectly
assumed that all objects provided were commits. During a fetch
negotiation, ok_to_give_up() in upload-pack.c may provide unpeeled tags
to the 'from' array. The current code creates a segfault.
Add a direct call to can_all_from_reach_with_flag() in 'test-tool reach'
and add a test in t6600-test-reach.sh that demonstrates this segfault.
Correct the issue by peeling tags when investigating the initial list
of objects in the 'from' array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit_contains method has two modes which depend on the given
ref_filter struct. We have the "normal" algorithm (which is also the
typically-slow operation) and the "tag" algorithm. This difference is
essentially what changes performance for 'git branch --contains' versus
'git tag --contains'. There are thoughts that the data shapes used by
these two applications justify the different implementations.
Create tests using 'test-tool reach commit_contains [--tag]' to cover
both methods.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flags method is used by ok_to_give_up in
upload-pack.c to see if we have done enough negotiation during a fetch.
This method is intentionally created to preserve state between calls to
assist with stateful negotiation, such as over SSH.
To make this method testable, add a new can_all_from_reach method that
does the initial setup and final tear-down. We will later use this
method in production code. Call the method from 'test-tool reach' for
now.
Since this is a many-to-many reachability query, add a new type of input
to the 'test-tool reach' input format. Lines "Y:<committish>" create a
list of commits to be the reachability targets from the commits in the
'X' list. In the context of fetch negotiation, the 'X' commits are the
'want' commits and the 'Y' commits are the 'have' commits.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_merge_bases_many method returns a list of merge bases for a
single commit (A) against a list of commits (X). Some care is needed in
constructing the expected behavior because the result is not the
expected merge-base for an octopus merge with those parents but instead
the set of maximal commits that are reachable from A and at least one of
the commits in X.
Add get_merge_bases_many to 'test-tool reach' and create a test that
demonstrates that this output returns multiple results. Specifically, we
select a list of three commits such that we output two commits that are
reachable from one of the first two, respectively, and none are
reachable from the third.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_descendant_of method takes a single commit as its first parameter
and a list of commits as its second parameter. Extend the input of the
'test-tool reach' command to take multiple lines of the form
"X:<committish>" to construct a list of commits. Pass these to
is_descendant_of and create tests that check each result.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we prepare to change the behavior of the algorithms in
commit-reach.c, create a new test-tool subcommand 'reach' to test these
methods on interesting commit-graph shapes.
To use the new test-tool, use 'test-tool reach <method>' and provide
input to stdin that describes the inputs to the method. Currently, we
only implement the ref_newer method, which requires two commits. Use
lines "A:<committish>" and "B:<committish>" for the two inputs. We will
expand this input later to accommodate methods that take lists of
commits.
The test t6600-test-reach.sh creates a repo whose commits form a
two-dimensional grid. This grid makes it easy for us to determine
reachability because commit-A-B can reach commit-X-Y if and only if A is
at least X and B is at least Y. This helps create interesting test cases
for each result of the methods in commit-reach.c.
We test all methods in three different states of the commit-graph file:
Non-existent (no generation numbers), fully computed, and mixed (some
commits have generation numbers and others do not).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
