Commit dddbad728c ("timestamp_t: a new data type for timestamps",
26-04-2017) introduced a new typedef 'timestamp_t', as a synonym for an
unsigned long, which was used at the time to represent timestamps in
git. A later commit 28f4aee3fb ("use uintmax_t for timestamps",
26-04-2017) changed the typedef to use an 'uintmax_t' for the timestamp
representation type.
When building on a 32-bit Linux system, sparse complains that a constant
(USTAR_MAX_MTIME) used to detect a 'far-future mtime' timestamp, is too
large; 'warning: constant 077777777777UL is so big it is unsigned long
long' on lines 335 and 338 of archive-tar.c. Note that both gcc and
clang only issue a warning if this constant is used in a context that
requires an 'unsigned long' (rather than an uintmax_t). (Since TIME_MAX
is no longer equal to 0xFFFFFFFF, even on a 32-bit system, the macro
USTAR_MAX_MTIME is set to 077777777777UL, which cannot be represented as
an 'unsigned long' constant).
In order to suppress the warning, change the definition of the macro
constant USTAR_MAX_MTIME to use an 'ULL' type suffix.
In a similar vein, on systems which use a 64-bit representation of the
'unsigned long' type, the USTAR_MAX_SIZE constant macro is defined with
the value 077777777777ULL. Although this does not cause any warning
messages to be issued, it would be more appropriate for this constant
to use an 'UL' type suffix rather than 'ULL'.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function write_extended_header() only ever returns 0. Simplify
it and its caller by dropping its return value, like we did with
write_global_extended_header() earlier.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we are not yet moving everything to size_t but still using ulong
internally when talking about the size of object, platforms with
32-bit long will not be able to produce tar archive with 4GB+ file,
and cannot grok 077777777777UL as a constant. Disable the extended
header feature and do not test it on them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never do any error checks, and so never return anything
but "0". Let's just drop this to simplify the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ustar format represents timestamps as seconds since the
epoch, but only has room to store 11 octal digits. To
express anything larger, we need to use an extended header.
This is exactly the same case we fixed for the size field in
the previous commit, and the solution here follows the same
pattern.
This is even mentioned as an issue in f2f0267 (archive-tar:
use xsnprintf for trivial formatting, 2015-09-24), but since
it only affected things far in the future, it wasn't deemed
worth dealing with. But note that my calculations claiming
thousands of years were off there; because our xsnprintf
produces a NUL byte, we only have until the year 2242 to fix
this.
Given that this is just around the corner (geologically
speaking, anyway), and because it's easy to fix, let's just
make it work. Unlike the previous fix for "size", where we
had to write an individual extended header for each file, we
can write one global header (since we have only one mtime
for the whole archive).
There's a slight bit of trickiness there. We may already be
writing a global header with a "comment" field for the
commit sha1. So we need to write our new field into the same
header. To do this, we push the decision of whether to write
such a header down into write_global_extended_header(),
which will now assemble the header as it sees fit, and will
return early if we have nothing to write (in practice, we'll
only have a large mtime if it comes from a commit, but this
makes it also work if you set your system clock ahead such
that time() returns a huge value).
Note that we don't (and never did) handle negative
timestamps (i.e., before 1970). This would probably not be
too hard to support in the same way, but since git does not
support negative timestamps at all, I didn't bother here.
After writing the extended header, we munge the timestamp in
the ustar headers to the maximum-allowable size. This is
wrong, but it's the least-wrong thing we can provide to a
tar implementation that doesn't understand pax headers (it's
also what GNU tar does).
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ustar format has a fixed-length field for the size of
each file entry which is supposed to contain up to 11 bytes
of octal-formatted data plus a NUL or space terminator.
These means that the largest size we can represent is
077777777777, or 1 byte short of 8GB. The correct solution
for a larger file, according to POSIX.1-2001, is to add an
extended pax header, similar to how we handle long
filenames. This patch does that, and writes zero for the
size field in the ustar header (the last bit is not
mentioned by POSIX, but it matches how GNU tar behaves with
--format=pax).
This should be a strict improvement over the current
behavior, which is to die in xsnprintf with a "BUG".
However, there's some interesting history here.
Prior to f2f0267 (archive-tar: use xsnprintf for trivial
formatting, 2015-09-24), we silently overflowed the "size"
field. The extra bytes ended up in the "mtime" field of the
header, which was then immediately written itself,
overwriting our extra bytes. What that means depends on how
many bytes we wrote.
If the size was 64GB or greater, then we actually overflowed
digits into the mtime field, meaning our value was
effectively right-shifted by those lost octal digits. And
this patch is again a strict improvement over that.
But if the size was between 8GB and 64GB, then our 12-byte
field held all of the actual digits, and only our NUL
terminator overflowed. According to POSIX, there should be a
NUL or space at the end of the field. However, GNU tar seems
to be lenient here, and will correctly parse a size up 64GB
(minus one) from the field. So sizes in this range might
have just worked, depending on the implementation reading
the tarfile.
This patch is mostly still an improvement there, as the 8GB
limit is specifically mentioned in POSIX as the correct
limit. But it's possible that it could be a regression
(versus the pre-f2f0267 state) if all of the following are
true:
1. You have a file between 8GB and 64GB.
2. Your tar implementation _doesn't_ know about pax
extended headers.
3. Your tar implementation _does_ parse 12-byte sizes from
the ustar header without a delimiter.
It's probably not worth worrying about such an obscure set
of conditions, but I'm documenting it here just in case.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f2f0267 (archive-tar: use xsnprintf for trivial
formatting, 2015-09-24) converted cases of "sprintf" to
"xsnprintf", but accidentally left one as just "snprintf".
This meant that we could silently truncate the resulting
buffer instead of flagging an error.
In practice, this is impossible to achieve, as we are
formatting a ustar checksum, which can be at most 7
characters. But the point of xsnprintf is to document and
check for "should be impossible" conditions; this site was
just accidentally mis-converted during f2f0267.
Noticed-by: Paul Green <Paul.Green@stratus.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate tar headers, we sprintf() values directly
into a struct with the fixed-size header values. For the
most part this is fine, as we are formatting small values
(e.g., the octal format of "mode & 0x7777" is of fixed
length). But it's still a good idea to use xsnprintf here.
It communicates to readers what our expectation is, and it
provides a run-time check that we are not overflowing the
buffers.
The one exception here is the mtime, which comes from the
epoch time of the commit we are archiving. For sane values,
this fits into the 12-byte value allocated in the header.
But since git can handle 64-bit times, if I claim to be a
visitor from the year 10,000 AD, I can overflow the buffer.
This turns out to be harmless, as we simply overflow into
the chksum field, which is then overwritten.
This case is also best as an xsnprintf. It should never come
up, short of extremely malformed dates, and in that case we
are probably better off dying than silently truncating the
date value (and we cannot expand the size of the buffer,
since it is dictated by the ustar format). Our friends in
the year 5138 (when we legitimately flip to a 12-digit
epoch) can deal with that problem then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This looks like a simple omission from 8539070 (archive-tar:
unindent write_tar_entry by one level, 2012-05-03).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 10f343ea81, whose
output is no longer bit-for-bit equivalent from the older versions
of Git, which the infrastructure to (pretend to) upload tarballs
kernel.org uses depends on.
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git archive's tar format uses extended pax headers to encode metadata
into the archive. Most tar implementations correctly treat these as
metadata, but some that do not understand the pax format extract these
as files instead. Apply the tar.umask setting to these entries to
prevent tampering by other users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is fewer lines of code, but more importantly, fixes a
bogus pointer offset. We are looking for "tar." in the
section, but later assume that the dot we found is at offset
9, not 3. This is a holdover from an earlier iteration of
767cf45 which called the section "tarfilter".
As a result, we could erroneously reject some filters with
dots in their name, as well as read uninitialized memory.
Reported by (and test by) René Scharfe.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve compatibility with implementations of "tar" that do not
like empty name field in header (with the additional prefix field
holding everything).
* rs/leave-base-name-in-name-field-of-tar:
archive-tar: split long paths more carefully
The name field of a tar header has a size of 100 characters. This limit
was extended long ago in a backward compatible way by providing the
additional prefix field, which can hold 155 additional characters. The
actual path is constructed at extraction time by concatenating the prefix
field, a slash and the name field.
get_path_prefix() is used to determine which slash in the path is used as
the cutting point and thus which part of it is placed into the field
prefix and which into the field name. It tries to cram as much into the
prefix field as possible. (And only if we can't fit a path into the
provided 255 characters we use a pax extended header to store it.)
If a path is longer than 100 but shorter than 156 characters and ends
with a slash (i.e. is for a directory) then get_path_prefix() puts the
whole path in the prefix field and leaves the name field empty. GNU tar
reconstructs the path without complaint, but the tar included with
NetBSD 6 does not: It reports the header to be invalid.
For compatibility with this version of tar, make sure to never leave the
name field empty. In order to do that, trim the trailing slash from the
part considered as possible prefix, if it exists -- that way the last
path component (or more, but not less) will end up in the name field.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX.1 (pax) is pretty clear on this:
The chksum field shall be the ISO/IEC 646:1991 standard IRV
representation of the octal value of the simple sum of all octets
in the header logical record. Each octet in the header shall be
treated as an unsigned value. These values shall be added to an
unsigned integer, initialized to zero, the precision of which is
not less than 17 bits. When calculating the checksum, the chksum
field is treated as if it were all <space> characters.
so is GNU:
http://www.gnu.org/software/tar/manual/html_node/Checksumming.html
Found by 7zip folks and reported by Rafał Mużyło.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For correctness, don't needlessly drop the const qualifier when casting.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5000 verifies output while t1050 makes sure the command always
respects core.bigfilethreshold
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive-tar.c and archive-zip.c now perform conversion check, with
help of sha1_file_to_archive() from archive.c
This gives backends more freedom in dealing with (streaming) large
blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's used to be
if (!sha1) {
...
} else if (!path) {
...
} else {
...
}
Now that the first two blocks are no-op. We can remove the if/else
skeleton and put the else block back by one indent level.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch write_tar_entry() can:
- write global header
by write_global_extended_header() calling write_tar_entry with
with both sha1 and path == NULL
- write extended header for symlinks, by write_tar_entry() calling
itself with sha1 != NULL and path == NULL
- write a normal blob. In this case both sha1 and path are valid.
After this patch, the first two call sites are modified to write the
header without calling write_tar_entry(). The function is now for
writing blobs only. This simplifies handling when write_tar_entry()
learns about large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tar filters may be very expensive to run, so sites do
not want to expose them via upload-archive. This patch lets
users configure tar.<filter>.remote to turn them off.
By default, gzip filters are left on, as they are about as
expensive as creating zip archives.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works exactly as if the user had configured it via:
[tar "tgz"]
command = gzip -cn
[tar "tar.gz"]
command = gzip -cn
but since it is so common, it's convenient to have it
builtin without the user needing to do anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's common to pipe the tar output produce by "git archive"
through gzip or some other compressor. Locally, this can
easily be done by using a shell pipe. When requesting a
remote archive, though, it cannot be done through the
upload-archive interface.
This patch allows configurable tar filters, so that one
could define a "tar.gz" format that automatically pipes tar
output through gzip.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current archivers are very static; when you are in the
write_tar_archive function, you know you are writing a tar.
However, to facilitate runtime-configurable archivers
that will share a common write function we need to tell the
function which archiver was used.
As a convenience, we also provide an opaque data pointer in
the archiver struct so that individual archivers can put
something useful there when they register themselves.
Technically they could just use the "name" field to look in
an internal map of names to data, but this is much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the tar and zip code was nicely split out into two
abstracted files which knew only about their specific
formats. The entry point to this code was a single "write
archive" function.
However, as these basic formats grow more complex (e.g., by
handling multiple file extensions and format names), a
static list of the entry point functions won't be enough.
Instead, let's provide a way for the tar and zip code to
tell the main archive code what they support by registering
archiver names and functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We load our own tar-specific config, and then chain to
git_default_config. This is pointless, as our caller should
already have loaded the default config. It also introduces a
needless inconsistency with the zip archiver, which does not
look at the config files at all (and therefore relies on the
caller to have loaded config).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, giving a value of type time_t to printf "%lo" that
expects an unsigned long would give a type mismatch warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add the exported function write_archive_entries() to archive.c, which uses
the new ability of read_tree_recursive() to pass a context pointer to its
callback in order to centralize previously duplicated code.
The new callback function write_archive_entry() does the work that every
archiver backend needs to do: loading file contents, entering subdirectories,
handling file attributes, constructing the full path of the entry. All that
done, it calls the backend specific write_archive_entry_fn_t function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calculate the length of base and save it in a new member of struct
archiver_args. This way we don't have to compute it in each of the
format backends.
Note: parse_archive_args() guarantees that ->base won't ever be NULL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a pointer parameter to read_tree_recursive(), which is passed to the
callback function. This allows callers of read_tree_recursive() to
share data with the callback without resorting to global variables. All
current callers pass NULL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute
export-subst when the option --prefix is given, too.
When it checked if a file has the attribute turned on, git-archive would try
to look up the full path -- including the prefix -- in .gitattributes. That's
wrong, as the prefix doesn't need to have any relation to any existing
directories, tracked or not.
This patch makes git-archive ignore the prefix when looking up if value of the
attribute export-subst for a file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add strbuf_rtrim to remove trailing spaces.
* Add strbuf_insert to insert data at a given position.
* Off-by one fix in strbuf_addf: strbuf_avail() does not counts the final
\0 so the overflow test for snprintf is the strict comparison. This is
not critical as the growth mechanism chosen will always allocate _more_
memory than asked, so the second test will not fail. It's some kind of
miracle though.
* Add size extension hints for strbuf_init and strbuf_read. If 0, default
applies, else:
+ initial buffer has the given size for strbuf_init.
+ first growth checks it has at least this size rather than the
default 8192.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master:
archive - leakfix for format_subst()
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
git-svn: understand grafts when doing dcommit
git-diff: don't squelch the new SHA1 in submodule diffs
Define NO_MEMMEM on Darwin as it lacks the function
git-svn: fix "Malformed network data" with svn:// servers
(cvs|svn)import: Ask git-tag to overwrite old tags.
git-rebase: fix -C option
git-rebase: support --whitespace=<option>
Documentation / grammer nit
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
This is just cleaner way to deal with strbufs, using its API rather than
reinventing it in the module (e.g. strbuf_append_string is just the plain
strbuf_addstr function, and it was used to perform what strbuf_addch does
anyways).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gory details are explained in strbuf.h. The change of semantics this
patch enforces is that the embeded buffer has always a '\0' character after
its last byte, to always make it a C-string. The offs-by-one changes are all
related to that very change.
A strbuf can be used to store byte arrays, or as an extended string
library. The `buf' member can be passed to any C legacy string function,
because strbuf operations always ensure there is a terminating \0 at the end
of the buffer, not accounted in the `len' field of the structure.
A strbuf can be used to generate a string/buffer whose final size is not
really known, and then "strbuf_detach" can be used to get the built buffer,
and keep the wrapping "strbuf" structure usable for further work again.
Other interesting feature: strbuf_grow(sb, size) ensure that there is
enough allocated space in `sb' to put `size' new octets of data in the
buffer. It helps avoiding reallocating data for nothing when the problem the
strbuf helps to solve has a known typical size.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
