The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
--get does not fail if a key is multi-valued, it returns the last value
as described in its documentation. Clarify the description of --get-all
to avoid implying that --get does fail in this case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a numbered list is confusing because the exit codes are not listed
in order so the numbers at the start of each line do not match the exit
codes described by the following text. Switch to a bulleted list so
that the only number appearing on each line is the exit code described.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --get, --get-all and --get-regexp options to git-config exit with
status 1 if the key is not found but --get-urlmatch succeeds in this
case.
Change --get-urlmatch to behave in the same way as the other --get*
options so that all four are consistent. --get-color is a special case
because it accepts a default value to return and so should not return an
error if the key is not found.
Also clarify this behaviour in the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
If config values are queried using 'git config' (e.g. via --get,
--get-all, --get-regexp, or --list flag) then it is sometimes hard to
find the configuration file where the values were defined.
Teach 'git config' the '--show-origin' option to print the source
configuration file for every printed value.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As described in the commit message of 9b25a0b (config: add
include directive, 2012-02-06), the `--include` option is
only on by default in some cases. But our documentation
described it as just "defaults to on", which doesn't tell
the whole story.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
Using the same urlmatch_config_entry() infrastructure, add a new
mode "--get-urlmatch" to the "git config" command, to learn values
for the "virtual" two-level variables customized for the specific
URL.
git config [--<type>] --get-urlmatch <section>[.<key>] <url>
With <section>.<key> fully specified, the configuration data for
<section>.<urlpattern>.<key> for <urlpattern> that best matches the
given <url> is sought (and if not found, <section>.<key> is used)
and reported. For example, with this configuration:
[http]
sslVerify
[http "https://weak.example.com"]
cookieFile = /tmp/cookie.txt
sslVerify = false
You would get
$ git config --bool --get-urlmatch http.sslVerify https://good.example.com
true
$ git config --bool --get-urlmatch http.sslVerify https://weak.example.com
false
With only <section> specified, you can get a list of all variables
in the section with their values that apply to the given URL. E.g
$ git config --get-urlmatch http https://weak.example.com
http.cookiefile /tmp/cookie.txt
http.sslverify false
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to clarify which value is used when there are multiple values
defined for a key, re-order the list of file locations so that it runs
from least specific to most specific. Then add a paragraph which simply
says that the last value will be used.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 00b347d (git-config: do not complain about duplicate
entries, 2012-10-23), "git config --get" does not exit with an error if
there are multiple values for the specified key but instead returns the
last value. Update the documentation to reflect this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was missed in the option list while mentioned from the general
description. Add it for completeness.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit status code from "git config" was way overspecified while
being incorrect. Update the implementation to give the documented
status for a case that was documented, and introduce a new code for
"all other errors".
* jc/maint-config-exit-status:
config: "git config baa" should exit with status 1
One fictitious command "proxy-command" is enclosed inside a double
quote pair, while another fictitious command "default-proxy" is not
in the example, but the quoting does not change anything in the pair
of examples. Remove the quotes to avoid unnecessary confusion.
Noticed by Michael Haggerty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--add" option is required to add a new value to a multivalued
configuration entry.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We instead failed with an undocumented exit status 255.
Also define a "catch-all" status and document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to write to $XDG_CONFIG_HOME/git/config if
- it already exists,
- $HOME/.gitconfig file doesn't, and
- The --global option is used.
Otherwise, write to $HOME/.gitconfig when the --global option is
given, as before.
If the user doesn't create $XDG_CONFIG_HOME/git/config, there is
absolutely no change. Users can use this new file only if they want.
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used.
Advice for users who often come back to an old version of Git: you
shouldn't create this file.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.
In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).
We do not write to this new location (yet).
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.
If the new file does not exist, the behavior is unchanged.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the FILES section of the git-config(1) manual:
$GIT_DIR/config::
Repository specific configuration file. (The filename is
of course relative to the repository root, not the working
directory.)
That's confusing because $GIT_DIR really is relative to the working
directory.
$ GIT_DIR=.git GIT_EDITOR='pwd; echo editing'
$ export GIT_DIR GIT_EDITOR
$ git config --edit --local
/home/jrn/src/git/Documentation
editing .git/config
It turns out that the comment is a remnant from older days when the
heading said ".git/config" (which is indeed relative to the top of the
worktree).
It was only when the heading was changed to refer more precisely to
<git dir>/config (see v1.5.3.2~18, AsciiDoc tweak to avoid leading
dot, 2007-09-14) that the parenthesis stopped making sense. Remove
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variable names must start with an alphabetic character, regexp config key
matching has its limits, sentence grammar.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return codes of git_config_set() and friends are magic numbers right
in the source. #define them in cache.h where the functions are declared,
and use the constants in the source.
Also, mention the resulting exit codes of "git config" in its man page
(and complete the list).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
395de250 (Expand ~ and ~user in core.excludesfile, commit.template)
introduced a C function git_config_pathname, doing ~/ and ~user/
expansion. This patch makes the feature available to scripts with 'git
config --get --path'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
