Normally fsck makes a pass over all objects to check their
integrity, and then follows up with a reachability check to
make sure we have all of the referenced objects (and to know
which ones are dangling). The latter checks for the HAS_OBJ
flag in obj->flags to see if we found the object in the
first pass.
Commit 02976bf85 (fsck: introduce `git fsck --connectivity-only`,
2015-06-22) taught fsck to skip the initial pass, and to
fallback to has_sha1_file() instead of the HAS_OBJ check.
However, it converted only one HAS_OBJ check to use
has_sha1_file(). But there are many other places in
builtin/fsck.c that assume that the flag is set (or that
lookup_object() will return an object at all). This leads to
several bugs with --connectivity-only:
1. mark_object() will not queue objects for examination,
so recursively following links from commits to trees,
etc, did nothing. I.e., we were checking the
reachability of hardly anything at all.
2. When a set of heads is given on the command-line, we
use lookup_object() to see if they exist. But without
the initial pass, we assume nothing exists.
3. When loading reflog entries, we do a similar
lookup_object() check, and complain that the reflog is
broken if the object doesn't exist in our hash.
So in short, --connectivity-only is broken pretty badly, and
will claim that your repository is fine when it's not.
Presumably nobody noticed for a few reasons.
One is that the embedded test does not actually test the
recursive nature of the reachability check. All of the
missing objects are still in the index, and we directly
check items from the index. This patch modifies the test to
delete the index, which shows off breakage (1).
Another is that --connectivity-only just skips the initial
pass for loose objects. So on a real repository, the packed
objects were still checked correctly. But on the flipside,
it means that "git fsck --connectivity-only" still checks
the sha1 of all of the packed objects, nullifying its
original purpose of being a faster git-fsck.
And of course the final problem is that the bug only shows
up when there _is_ corruption, which is rare. So anybody
running "git fsck --connectivity-only" proactively would
assume it was being thorough, when it was not.
One possibility for fixing this is to find all of the spots
that rely on HAS_OBJ and tweak them for the connectivity-only
case. But besides the risk that we might miss a spot (and I
found three already, corresponding to the three bugs above),
there are other parts of fsck that _can't_ work without a
full list of objects. E.g., the list of dangling objects.
Instead, let's make the connectivity-only case look more
like the normal case. Rather than skip the initial pass
completely, we'll do an abbreviated one that sets up the
HAS_OBJ flag for each object, without actually loading the
object data.
That's simple and fast, and we don't have to care about the
connectivity_only flag in the rest of the code at all.
While we're at it, let's make sure we treat loose and packed
objects the same (i.e., setting up dummy objects for both
and skipping the actual sha1 check). That makes the
connectivity-only check actually fast on a real repo (40
seconds versus 180 seconds on my copy of linux.git).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell script version of the interactive rebase has a very specific
final message. Teach the sequencer to print the same.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the benefit of e.g. the shell prompt, the interactive rebase not
only displays the progress for the user to see, but also writes it into
the msgnum/end files in the state directory.
Teach the sequencer this new trick.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase keeps the user informed about its progress.
If the sequencer wants to do the grunt work of the interactive
rebase, it also needs to show that progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the same behavior as known from `git rebase -i`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the behavior of the shell script version of the interactive
rebase, by using the `output` function defined in `git-rebase.sh`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the behavior of the shell script version of the interactive
rebase, by using the `output` function defined in `git-rebase.sh`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the convenience function run_command_v_opt_cd_env(), we
now use the run_command() function. The former function is simply a
wrapper of the latter, trying to make it more convenient to use.
However, we already have to construct the argv and the env parameters,
and we will need even finer control e.g. over the output of the command,
so let's just stop using the convenience function.
Based on patches and suggestions by Johannes Sixt and Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than abusing a strbuf to come up with an environment block,
let's just use the argv_array structure which serves the same
purpose much better.
While at it, rename the function to reflect the fact that it does
not really care exactly what environment variables are defined in
said file.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a builtin difftool that still falls back to the legacy Perl
version, which has been renamed to `legacy-difftool`.
The idea is that the new, experimental, builtin difftool immediately hands
off to the legacy difftool for now, unless the config variable
difftool.useBuiltin is set to true.
This feature flag will be used in the upcoming Git for Windows v2.11.0
release, to allow early testers to opt-in to use the builtin difftool and
flesh out any bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checking connectivity, fsck looks through the list of
any objects we've seen mentioned, and reports unreachable
and un-"used" ones as dangling. However, it skips any object
which is not marked as "parsed", as that is an object that
we _don't_ have (but that somebody mentioned).
Since 6e454b9a3 (clear parsed flag when we free tree
buffers, 2013-06-05), that flag can't be relied on, and the
correct method is to check the HAS_OBJ flag. The cleanup in
that commit missed this callsite, though. As a result, we
would generally fail to report dangling trees.
We never noticed because there were no tests in this area
(for trees or otherwise). Let's add some.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test creates a multi-level set of trees, but its
cleanup routine only removes the top-level tree. After the
test finishes, the inner tree and the blob it points to
remain, making the inner tree dangling.
A later test ("cleaned up") verifies that we've removed any
cruft and "git fsck" output is clean. This passes only
because of a bug in git-fsck which fails to notice dangling
trees.
In preparation for fixing the bug, let's teach this earlier
test to clean up after itself correctly. We have to remove
the inner tree (and therefore the blob, too, which becomes
dangling after removing that tree).
Since the setup code happens inside a subshell, we can't
just set a variable for each object. However, we can stuff
all of the sha1s into the $T output variable, which is not
used for anything except cleanup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that a relative pathname for diff.orderFile is interpreted as
relative to the top-level work directory.
Signed-off-by: Richard Hansen <hansenr@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull uses OPTIONS_SPEC, so no need for (meanwhile incomplete)
USAGE and LONG_USAGE anymore.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a loose tree or commit is read by fsck (or any git
program), unpack_sha1_rest() checks whether there is extra
cruft at the end of the object file, after the zlib data.
Blobs that are streamed, however, do not have this check.
For normal git operations, it's not a big deal. We know the
sha1 and size checked out, so we have the object bytes we
wanted. The trailing garbage doesn't affect what we're
trying to do.
But since the point of fsck is to find corruption or other
problems, it should be more thorough. This patch teaches its
loose-sha1 reader to detect extra bytes after the zlib
stream and complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we iterate over the list of loose objects to check, we
get the actual path of each object. But we then throw it
away and pass just the sha1 to fsck_sha1(), which will do a
fresh lookup. Usually it would find the same object, but it
may not if an object exists both as a loose and a packed
object. We may end up checking the packed object twice, and
never look at the loose one.
In practice this isn't too terrible, because if fsck doesn't
complain, it means you have at least one good copy. But
since the point of fsck is to look for corruption, we should
be thorough.
The new read_loose_object() interface can help us get the
data from disk, and then we replace parse_object() with
parse_object_buffer(). As a bonus, our error messages now
mention the path to a corrupted object, which should make it
easier to track down errors when they do happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's surprisingly hard to ask the sha1_file code to open a
_specific_ incarnation of a loose object. Most of the
functions take a sha1, and loop over the various object
types (packed versus loose) and locations (local versus
alternates) at a low level.
However, some tools like fsck need to look at a specific
file. This patch gives them a function they can use to open
the loose object at a given path.
The implementation unfortunately ends up repeating bits of
related functions, but there's not a good way around it
without some major refactoring of the whole sha1_file stack.
We need to mmap the specific file, then partially read the
zlib stream to know whether we're streaming or not, and then
finally either stream it or copy the data to a buffer.
We can do that by assembling some of the more arcane
internal sha1_file functions, but we end up having to
essentially reimplement unpack_sha1_file(), along with the
streaming bits of check_sha1_signature().
Still, most of the ugliness is contained in the new
function, and the interface is clean enough that it may be
reusable (though it seems unlikely anything but git-fsck
would care about opening a specific file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths in fsck for packed and loose objects are
quite different, and it is not immediately obvious that the
packed case behaves well. In particular:
1. The fsck_loose() function always returns "0" to tell the
iterator to keep checking more objects. Whereas
fsck_obj_buffer() (which handles packed objects)
returns -1. This is OK, because the callback machinery
for verify_pack() does not stop when it sees a non-zero
return.
2. The fsck_loose() function sets the ERROR_OBJECT bit
when fsck_obj() fails, whereas fsck_obj_buffer() sets it
only when it sees a corrupt object. This turns out not
to matter. We don't actually do anything with this bit
except exit the program with a non-zero code, and that
is handled already by the non-zero return from the
function.
So there are no bugs here, but it was certainly confusing to
me. And we do not test either of the properties in t1450
(neither that a non-corruption error will caused a non-zero
exit for a packed object, nor that we keep going after
seeing the first error). Let's test both of those
conditions, so that we'll notice if any of those assumptions
becomes invalid.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to open a corrupt loose object, we report an
error and mention the filename via sha1_file_name().
However, that function will always give us a path in the
local repository, whereas the corrupt object may have come
from an alternate. The result is a very misleading error
message.
Teach the open_sha1_file() and stat_sha1_file() helpers to
pass back the path they found, so that we can report it
correctly.
Note that the pointers we return go to static storage (e.g.,
from sha1_file_name()), which is slightly dangerous.
However, these helpers are static local helpers, and the
names are used for immediately generating error messages.
The simplicity is an acceptable tradeoff for the danger.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 90cf590f5 (fsck: optionally show more helpful info
for broken links, 2016-07-17) added a remove_loose_object()
helper, but we already had a remove_object() helper that did
the same thing. Let's combine these into one.
The implementations had a few subtle differences, so I've
tried to take the best of both:
- the original used "sed", but the newer version avoids
spawning an extra process
- the original processed "$*", which was nonsense, as it
assumed only a single sha1. Use "$1" to make that more
clear.
- the newer version ran an extra rev-parse, but it was not
necessary; it's sole caller already converted the
argument into a raw sha1
- the original used "rm -f", whereas the new one uses
"rm". The latter is better because it may notice a bug
or other unexpected failure in the test. (The original
does check that the object exists before we remove it,
which is good, but that's a subset of the possible
unexpected conditions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
37cd4f7 ("Document git-gui, git-citool as mainporcelain manual pages",
2007-06-21) documented the default, but was shortly followed by c52c945
("git-gui: Allow blame/browser subcommands on bare repositories",
2007-07-17) which, it would appear, as a side effect, removed that default.
Finally document that change.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the 'git gui' information regarding the graphical browser
and its upstream location.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/gitview has been removed. Remove the reference.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We write
(cd <dir> && git <cmd>)
to avoid
cd <dir> && git <cmd> && cd ..
that allows a breakage in one part of the test script to leave the
entire test process in an unexpected place. Modern version of Git
allows us to do this more concisely with "git -C <dir> <cmd>".
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the PATH_MAX limitation from the environment setting that
points to a filename by switching to dynamic allocation.
As a side effect of this change, we also reduce the snprintf()
calls, that may silently truncate results if the programmer is not
careful.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following part of the description:
git bisect (bad|new) [<rev>]
git bisect (good|old) [<rev>...]
may be a bit confusing, as a reader may wonder if instead it should be:
git bisect (bad|good) [<rev>]
git bisect (old|new) [<rev>...]
Of course the difference between "[<rev>]" and "[<rev>...]" should hint
that there is a good reason for the way it is.
But we can further clarify and complete the description by adding
"<term-new>" and "<term-old>" to the "bad|new" and "good|old"
alternatives.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `user-manual.txt` is designed as a `book` but the `Makefile` wants
to build it as an `article`. This seems to be a problem when building
the documentation with `asciidoctor`. Furthermore the parts *Git
Glossary* and *Appendix B* had no subsections which is not allowed when
building with `asciidoctor`. So lets add a *dummy* section.
Signed-off-by: 마누엘 <nalla@hamal.uberspace.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the submodule helper we did not correctly handled the display path
for initializing submodules when both the submodule is inside a
subdirectory as well as the command being invoked from a subdirectory
(as viewed from the superproject).
This was broken in 3604242f08, which was written at a time where
there was no super-prefix available, so we abused the --prefix option
for the same purpose and could get only one case right (the call from
within a subdirectory, not the submodule being in a subdirectory).
Test-provided-by: David Turner <novalis@novalis.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we need to lookup information of uninitialized submodules. Make
sure that works.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables may contain white spaces, so we need to quote them.
By not quoting the variables we'd end up passing multiple arguments to
git config, which doesn't fail for two arguments as value.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This part was missing in f6f85861 (submodule: add absorb-git-dir function,
2016-12-12).
Noticed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --inter-hunk-context= option was added in commit 6d0e674a57
("diff: add option to show context between close hunks"). This patch
allows configuring a default for this option.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'versionsort.prereleaseSuffix' configuration variable, as its name
suggests, is supposed to only deal with tagnames with prerelease
suffixes, and allows sorting those prerelease tags in a user-defined
order before the suffixless main release tag, instead of sorting them
simply lexicographically.
However, the previous changes in this series resulted in an
interesting and useful property of version sort:
- The empty string as a configured suffix matches all tagnames,
including tagnames without any suffix, but
- tagnames containing a "real" configured suffix are still ordered
according to that real suffix, because any longer suffix takes
precedence over the empty string.
Exploiting this property we can easily generalize suffix reordering
and specify the order of tags with given suffixes not only before but
even after a main release tag by using the empty suffix to denote the
position of the main release tag, without any algorithm changes:
$ git -c versionsort.prereleaseSuffix=-alpha \
-c versionsort.prereleaseSuffix=-beta \
-c versionsort.prereleaseSuffix="" \
-c versionsort.prereleaseSuffix=-gamma \
-c versionsort.prereleaseSuffix=-delta \
tag -l --sort=version:refname 'v3.0*'
v3.0-alpha1
v3.0-beta1
v3.0
v3.0-gamma1
v3.0-delta1
Since 'versionsort.prereleaseSuffix' is not a fitting name for a
configuration variable to control this more general suffix reordering,
introduce the new variable 'versionsort.suffix'. Still keep the old
configuration variable name as a deprecated alias, though, to avoid
suddenly breaking setups already using it. Ignore the old variable if
both old and new configuration variables are set, but emit a warning
so users will be aware of it and can fix their configuration. Extend
the documentation to describe and add a test to check this more
general behavior.
Note: since the empty suffix matches all tagnames, tagnames with
suffixes not included in the configuration are listed together with
the suffixless main release tag, ordered lexicographically right after
that, i.e. before tags with suffixes listed in the configuration
following the empty suffix.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the number of identical steps to be done for both tagnames grows,
extract them into a helper function, with the additional benefit that
the conditionals near the end of swap_prereleases() will use more
meaningful variable names.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our error() and die() calls may report messages with
arbitrary data (e.g., filenames or even data from a remote
server). Let's make it harder to cause confusion with
mischievous filenames. E.g., try:
git rev-parse "$(printf "\rfatal: this argument is too sneaky")" --
or
git rev-parse "$(printf "\x1b[5mblinky\x1b[0m")" --
Let's block all ASCII control characters, with the exception
of TAB and LF. We use both in our own messages (and we are
necessarily sanitizing the complete output of snprintf here,
as we do not have access to the individual varargs). And TAB
and LF are unlikely to cause confusion (you could put
"\nfatal: sneaky\n" in your filename, but it would at least
not _cover up_ the message leading to it, unlike "\r").
We'll replace the characters with a "?", which is similar to
how "ls" behaves. It might be nice to do something less
lossy, like converting them to "\x" hex codes. But replacing
with a single character makes it easy to do in-place and
without worrying about length limitations. This feature
should kick in rarely enough that the "?" marks are almost
never seen.
We'll leave high-bit characters as-is, as they are likely to
be UTF-8 (though there may be some Unicode mischief you
could cause, which may require further patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f4c3edc0b1.
The purpose of that commit was to let us write errors of
arbitrary length to stderr by skipping the intermediate
buffer and sending our varargs straight to fprintf. That
works, but it comes with a downside: we do not get access to
the varargs before they are sent to stderr.
On balance, it's not a good tradeoff. Error messages larger
than our 4K buffer are quite uncommon, and we've lost the
ability to make any modifications to the output (e.g., to
remove non-printable characters).
The only way to have both would be one of:
1. Write into a dynamic buffer. But this is a bad idea for
a low-level function that may be called when malloc()
has failed.
2. Do our own printf-format varargs parsing. This is too
complex to be worth the trouble.
Let's just revert that change and go back to a fixed buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve constness of the index_state parameter to the
'read_blob_data_from_index' function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few of the tests want to check that "git grep -P -E" will
override -P with -E, and vice versa. To do so, we use a
regex with "\x{..}", which is valid in PCRE but not defined
by POSIX (for basic or extended regular expressions).
However, POSIX declares quite a lot of syntax, including
"\x", as "undefined". That leaves implementations free to
extend the standard if they choose. At least one, musl libc,
implements "\x" in the same way as PCRE. Our tests check
that "-E" complains about "\x", which fails with musl.
We can fix this by finding some construct which behaves
reliably on both PCRE and POSIX, but differently in each
system.
One such construct is the use of backslash inside brackets.
In PCRE, "[\d]" interprets "\d" as it would outside the
brackets, matching a digit. Whereas in POSIX, the backslash
must be treated literally, and we match either it or a
literal "d". Moreover, implementations are not free to
change this according to POSIX, so we should be able to rely
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new submodule helper "git submodule embedgitdirs" to make it
easier to move embedded .git/ directory for submodules in a
superproject to .git/modules/ (and point the latter with the former
that is turned into a "gitdir:" file) has been added.
* sb/submodule-embed-gitdir:
worktree: initialize return value for submodule_uses_worktrees
submodule: add absorb-git-dir function
move connect_work_tree_and_git_dir to dir.h
worktree: check if a submodule uses worktrees
test-lib-functions.sh: teach test_commit -C <dir>
submodule helper: support super prefix
submodule: use absolute path for computing relative path connecting
"git diff" and its family had two experimental heuristics to shift
the contents of a hunk to make the patch easier to read. One of
them turns out to be better than the other, so leave only the
"--indent-heuristic" option and remove the other one.
* jc/retire-compaction-heuristics:
diff: retire "compaction" heuristics
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
The codeflow of setting NOATIME and CLOEXEC on file descriptors Git
opens has been simplified.
We may want to drop the tip one, but we'll see.
* jc/git-open-cloexec:
sha1_file: stop opening files with O_NOATIME
git_open_cloexec(): use fcntl(2) w/ FD_CLOEXEC fallback
git_open(): untangle possible NOATIME and CLOEXEC interactions
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
