When symlinks in the working tree are manipulated using the absolute
path, git dereferences them, and tries to manipulate the link target
instead.
This applies to most high-level commands but prefix_path is the common
denominator for all of them.
Add a known-breakage tests using the prefix_path function, which
currently uses real_path, causing the dereference.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When symlinks in the working tree are manipulated using the absolute
path, git dereferences them, and tries to manipulate the link target
instead.
This causes most high-level functions to misbehave when acting on
symlinks given via absolute paths. For example
$ git add /dir/repo/symlink
attempts to add the target of the symlink rather than the symlink
itself, which is usually not what the user intends to do.
This is a regression introduced by 18e051a:
setup: translate symlinks in filename when using absolute paths
(which did not take symlinks inside the work tree into consideration).
Add a known-breakage test using the ls-files function, checking both if
the symlink leads to a target in the same directory, and a target in the
above directory.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Tested-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise there is a race: if 'git log' finishes writing before the
pager terminates and closes the pipe, all is well, and if the pager
finishes quickly enough then 'git log' terminates with SIGPIPE.
died of signal 13 at /build/buildd/git-1.9~rc1/t/test-terminal.perl line 33.
not ok 6 - LESS and LV envvars are set for pagination
Noticed on Ubuntu PPA builders, where the race was lost about half the
time. Compare v1.7.0.2~6^2 (tests: Fix race condition in t7006-pager,
2010-02-22).
Reported-by: Anders Kaseorg <andersk@MIT.EDU>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix performance regression in v1.8.4.x and later.
* jk/mark-edges-uninteresting:
list-objects: only look at cmdline trees with edge_hint
t/perf: time rev-list with UNINTERESTING commits
Fix a handful of bugs around interpreting $branch@{upstream}
notation and its lookalike, when $branch part has interesting
characters, e.g. "@", and ":".
* jk/interpret-branch-name-fix:
interpret_branch_name: find all possible @-marks
interpret_branch_name: avoid @{upstream} past colon
interpret_branch_name: always respect "namelen" parameter
interpret_branch_name: rename "cp" variable to "at"
interpret_branch_name: factor out upstream handling
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
The current basedir compare aborts early in order to avoid futile
recursive searches. However, a match may still be found by another
pathspec. This can cause an error while checking out files from a branch
when using multiple pathspecs:
$ git checkout master -- 'a/*.txt' 'b/*.txt'
error: pathspec 'a/*.txt' did not match any file(s) known to git.
Signed-off-by: Andy Spencer <andy753421@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of touch (such as /usr/ucb/touch on Solaris)
do not know about the "-r" option. This would make sense as
a feature of test-chmtime, but fortunately this fix is even
easier.
The test does not care about the timestamp of the .keep file it
creates at all, only that it exists. For such a use case, with or
without portability issues around "-r", "touch" should not be used
in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7501.9 tries to check that "git commit" will fail when the
index is unchanged. It relies on previous tests not to have
modified the index. When it was originally written, this was
always the case. However, commit c65dc35 (t7501: test the
right kind of breakage, 2012-03-30) changed earlier tests (4
and 5) to leave a modification in the index.
We never noticed, however, because t7501.7, between the two,
clears the index state as a side effect. However, that test
depends on the PERL prerequisite, and so it does not always
run. Therefore if NO_PERL is set, we do not run the
intervening test, the index is left unclean, and t7501.9
fails.
We could fix this by moving t7501.9 up in the script.
However, this patch instead leaves it in place and adds a
"git reset" before the commit. This makes the test more
explicit about its preconditions, and will future-proof it
against any other changes in the test state.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do ignore trailing slash on a directory, so pathspec "abc/" matches
directory "abc". A submodule is also a directory. Apply the same logic
to it. This makes "git log submodule-path" and "git log submodule-path/"
produce the same output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The p4 server can enforce file locking, so that only one user
can edit a file at a time. Git p4 is unable to submit changes
to locked files. Currently it exits poorly. Ideally it would
notice the locked condition and clean up nicely.
Add a bunch of tests that describe the problem, hoping that
fixes appear in the future.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9d7d446 (git p4: submit files with wildcards, 2012-04-29)
fixed problems with handling files that had p4 wildcard
characters, like "@" and "*". But it missed one case, that of
RCS keyword scrubbing, which uses "p4 fstat" to extract type
information. Fix it by calling wildcard_encode() on the raw
filename.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating the submit template for p4 uses tempfile.mkstemp(),
which by default puts files in /tmp. For a test that fails,
possibly on purpose, this is not cleaned up. Run with TMPDIR
pointing into the trash directory so the temp files go away
with the test results.
To do this required some other minor changes. First, the editor
is launched using system(editor + " " + template_file), using
shell expansion to build the command string. This doesn't work
if editor has a space in it. And is generally unwise as it's
easy to fool the shell into doing extra work. Exec the args
directly, without shell expansion.
Second, without shell expansion, the trick of "P4EDITOR=:" used
in the tests doesn't work. Use a real command, true, as the
non-interactive editor for testing.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests use author@example.com as the canonical submitter,
but he does not have an entry in the p4 users database.
This causes the generated change description to complain
that the git and p4 users disagree. The complaint message
is still valid, but isn't useful in tests. It was introduced
in 848de9c (git-p4: warn if git authorship won't be retained,
2011-05-13).
Fix t9813 to use @example.com instead of @localhost due to
change in p4_add_user(). Move the function into the git p4
test library so author can be added at initialization time.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e9df0f9 (git p4: cygwin p4 client does not mark read-only,
2013-01-26) fixed a problem with "test -w" on cygwin, but mistakenly
marked the new test as failing. Fix this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no test where p4 deleted a file with a wildcard
character. Make sure git p4 applies the wildcard decoding
properly when importing a delete that includes a wildcard.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Damien Gérard highlights an interesting problem. Some p4
repositories end up with symlinks that have an empty target. It
is not possible to create this with current p4, but they do
indeed exist.
The effect in git p4 is that "p4 print" on the symlink returns an
empty string, confusing the curret symlink-handling code.
Such broken repositories cause problems in p4 as well, even with
no git involved. In p4, syncing to a change that includes a
bogus symlink causes errors:
//depot/empty-symlink - updating /home/me/p4/empty-symlink
rename: /home/me/p4/empty-symlink: No such file or directory
and leaves no symlink.
In git, replicate the p4 behavior by ignoring these bad symlinks.
If, in a later p4 revision, the symlink happens to point to
something non-null, the symlink will be replaced properly.
Add a big test for all this too.
This happens to be a regression introduced by 1292df1 (git-p4:
Fix occasional truncation of symlink contents., 2013-08-08) and
appeared first in 1.8.5. But it shows up only in p4 repositories
of dubious character, so can wait for a proper release.
Tested-by: Damien Gérard <damien@iwi.me>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While this happens to work, there was no test to make sure
that the basic importing of a symlink from p4 to git functioned.
Add a simple test to create a symlink in p4 and import it into git,
then verify that the symlink exists and has the correct target.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d57c4a (git p4: implement view spec wildcards with "p4
where", 2013-08-30), all the wildcard types should be supported.
Change must-fail tests to mark that they now pass.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We time a straight "rev-list --all" and its "--object"
counterpart, both going all the way to the root. However, we
do not time a partial history walk. This patch adds an
extreme case: a walk over a very small slice of history, but
with a very large set of UNINTERESTING tips. This is similar
to the connectivity check run by git on a small fetch, or
the walk done by any pre-receive hooks that want to check
incoming commits.
This test reveals a performance regression in git v1.8.4.2,
caused by fbd4a70 (list-objects: mark more commits as edges
in mark_edges_uninteresting, 2013-08-16):
Test fbd4a703^ fbd4a703
------------------------------------------------------------------------------------------
0001.1: rev-list --all 0.69(0.67+0.02) 0.69(0.68+0.01) +0.0%
0001.2: rev-list --all --objects 3.47(3.44+0.02) 3.48(3.44+0.03) +0.3%
0001.4: rev-list $commit --not --all 0.04(0.04+0.00) 0.04(0.04+0.00) +0.0%
0001.5: rev-list --objects $commit --not --all 0.04(0.03+0.00) 0.27(0.24+0.02) +575.0%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Add a `pull.ff` configuration option that is analogous
to the `merge.ff` option.
This allows us to control the fast-forward behavior for
pull-initiated merges only.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous fix 895c5ba3 (revision: do not peel tags used in
range notation, 2013-09-19), handle_revision_arg() that processes
command line arguments for the "git log" family of commands no
longer directly places the object pointed by the tag in the pending
object array when it sees a tag object. We used to place pointee
there after copying the flag bits like UNINTERESTING and
SYMMETRIC_LEFT.
This change meant that any flag that is relevant to later history
traversal must now be propagated to the pointed objects (most often
these are commits) while starting the traversal, which is partly
done by handle_commit() that is called from prepare_revision_walk().
We did propagate UNINTERESTING, but did not do so for others, most
notably SYMMETRIC_LEFT. This caused "git log --left-right v1.0..."
(where "v1.0" is a tag) to start losing the "leftness" from the
commit the tag points at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects ^A^{tree} B^{tree}" ought to mean "I want a
list of objects inside B's tree, but please exclude the objects that
appear inside A's tree".
we see the top-level tree marked as uninteresting (i.e. ^A^{tree} in
the above example) and call mark_tree_uninteresting() on it; this
unfortunately prevents us from recursing into the tree and marking
the objects in the tree as uninteresting.
The reason why "git log ^A A" yields an empty set of commits,
i.e. we do not have a similar issue for commits, is because we call
mark_parents_uninteresting() after seeing an uninteresting commit.
The uninteresting-ness of the commit itself does not prevent its
parents from being marked as uninteresting.
Introduce mark_tree_contents_uninteresting() and structure the code
in handle_commit() in such a way that it makes it the responsibility
of the callchain leading to this function to mark commits, trees and
blobs as uninteresting, and also make it the responsibility of the
helpers called from this function to mark objects that are reachable
from them.
Note that this is a very old bug that probably dates back to the day
when "rev-list --objects" was introduced. The line to clear
tree->object.parsed at the end of mark_tree_contents_uninteresting()
can be removed when this fix is merged to the codebase after
6e454b9a (clear parsed flag when we free tree buffers, 2013-06-05).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a string like "foo@{upstream}", we look for
the first "@"-sign, and check to see if it is an upstream
mark. However, since branch names can contain an @, we may
also see "@foo@{upstream}". In this case, we check only the
first @, and ignore the second. As a result, we do not find
the upstream.
We can solve this by iterating through all @-marks in the
string, and seeing if any is a legitimate upstream or
empty-at mark.
Another strategy would be to parse from the right-hand side
of the string. However, that does not work for the
"empty_at" case, which allows "@@{upstream}". We need to
find the left-most one in this case (and we then recurse as
"HEAD@{upstream}").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_sha1() cannot currently parse a valid object name like
"HEAD:@{upstream}" (assuming that such an oddly named file
exists in the HEAD commit). It takes two passes to parse the
string:
1. It first considers the whole thing as a ref, which
results in looking for the upstream of "HEAD:".
2. It finds the colon, parses "HEAD" as a tree-ish, and then
finds the path "@{upstream}" in the tree.
For a path that looks like a normal reflog (e.g.,
"HEAD:@{yesterday}"), the first pass is a no-op. We try to
dwim_ref("HEAD:"), that returns zero refs, and we proceed
with colon-parsing.
For "HEAD:@{upstream}", though, the first pass ends up in
interpret_upstream_mark, which tries to find the branch
"HEAD:". When it sees that the branch does not exist, it
actually dies rather than returning an error to the caller.
As a result, we never make it to the second pass.
One obvious way of fixing this would be to teach
interpret_upstream_mark to simply report "no, this isn't an
upstream" in such a case. However, that would make the
error-reporting for legitimate upstream cases significantly
worse. Something like "bogus@{upstream}" would simply report
"unknown revision: bogus@{upstream}", while the current code
diagnoses a wide variety of possible misconfigurations (no
such branch, branch exists but does not have upstream, etc).
However, we can take advantage of the fact that a branch
name cannot contain a colon. Therefore even if we find an
upstream mark, any prefix with a colon must mean that
the upstream mark we found is actually a pathname, and
should be disregarded completely. This patch implements that
logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
interpret_branch_name gets passed a "name" buffer to parse,
along with a "namelen" parameter representing its length. If
"namelen" is zero, we fallback to the NUL-terminated
string-length of "name".
However, it does not necessarily follow that if we have
gotten a non-zero "namelen", it is the NUL-terminated
string-length of "name". E.g., when get_sha1() is parsing
"foo:bar", we will be asked to operate only on the first
three characters.
Yet in interpret_branch_name and its helpers, we use string
functions like strchr() to operate on "name", looking past
the length we were given. This can result in us mis-parsing
object names. We should instead be limiting our search to
"namelen" bytes.
There are three distinct types of object names this patch
addresses:
- The intrepret_empty_at helper uses strchr to find the
next @-expression after our potential empty-at. In an
expression like "@:foo@bar", it erroneously thinks that
the second "@" is relevant, even if we were asked only
to look at the first character. This case is easy to
trigger (and we test it in this patch).
- When finding the initial @-mark for @{upstream}, we use
strchr. This means we might treat "foo:@{upstream}" as
the upstream for "foo:", even though we were asked only
to look at "foo". We cannot test this one in practice,
because it is masked by another bug (which is fixed in
the next patch).
- The interpret_nth_prior_checkout helper did not receive
the name length at all. This turns out not to be a
problem in practice, though, because its parsing is so
limited: it always starts from the far-left of the
string, and will not tolerate a colon (which is
currently the only way to get a smaller-than-strlen
"namelen"). However, it's still worth fixing to make the
code more obviously correct, and to future-proof us
against callers with more exotic buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently fetching a one-level ref like "refs/foo" does not
work consistently. The outer "git fetch" program filters the
list of refs, checking each against check_refname_format.
Then it feeds the result to do_fetch_pack to actually
negotiate the haves/wants and get the pack. The fetch-pack
code does its own filter, and it behaves differently.
The fetch-pack filter looks for refs in "refs/", and then
feeds everything _after_ the slash (i.e., just "foo") into
check_refname_format. But check_refname_format is not
designed to look at a partial refname. It complains that the
ref has only one component, thinking it is at the root
(i.e., alongside "HEAD"), when in reality we just fed it a
partial refname.
As a result, we omit a ref like "refs/foo" from the pack
request, even though "git fetch" then tries to store the
resulting ref. If we happen to get the object anyway (e.g.,
because the ref is contained in another ref we are
fetching), then the fetch succeeds. But if it is a unique
object, we fail when trying to update "refs/foo".
We can fix this by just passing the whole refname into
check_refname_format; we know the part we were omitting is
"refs/", which is acceptable in a refname. This at least
makes the checks consistent with each other.
This problem happens most commonly with "refs/stash", which
is the only one-level ref in wide use. However, our test
does not use "refs/stash", as we may later want to restrict
it specifically (not because it is one-level, but because
of the semantics of stashes).
We may also want to do away with the multiple levels of
filtering (which can cause problems when they are out of
sync), or even forbid one-level refs entirely. However,
those decisions can come later; this fixes the most
immediate problem, which is the mismatch between the two.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to avoid casting unnecessary detail in stone.
* sb/diff-orderfile-config:
diff test: reading a directory as a file need not error out
With a submodule that was initialized in an old fashioned way
without gitlinks, switching branches in the superproject between
the one with and without the submodule may leave the submodule
working tree with its embedded repository behind, as there may be
unexpendable state there. Document and warn users about this.
* jl/submodule-mv-checkout-caveat:
rm: better document side effects when removing a submodule
mv: better document side effects when moving a submodule
The implementation of 'git stash $cmd "stash@{...}"' did not quote
the stash argument properly and left it split at IFS whitespace.
* ow/stash-with-ifs:
stash: handle specifying stashes with $IFS
Just like we give a reasonable default for "less" via the LESS
environment variable, specify a reasonable default for "lv" via the
"LV" environment variable when spawning the pager.
* jn/pager-lv-default-env:
pager: set LV=-c alongside LESS=FRSX
"git mv A B/", when B does not exist as a directory, should error
out, but it didn't.
* mm/mv-file-to-no-such-dir-with-slash:
mv: let 'git mv file no-such-dir/' error out on Windows, too
mv: let 'git mv file no-such-dir/' error out
"git rev-parse <revs> -- <paths>" did not implement the usual
disambiguation rules the commands in the "git log" family used in
the same way.
* jk/rev-parse-double-dashes:
rev-parse: be more careful with munging arguments
rev-parse: correctly diagnose revision errors before "--"
"git cat-file --batch=", an admittedly useless command, did not
behave very well.
* jk/cat-file-regression-fix:
cat-file: handle --batch format with missing type/size
cat-file: pass expand_data to print_object_or_die
Commit 43eb920 switched one of the sub-repository in this
test to matching to prepare for a world where the default
becomes "simple". However, the main repository needs a
similar change.
We did not notice any test failure when merged with b2ed944
(push: switch default from "matching" to "simple", 2013-01-04)
because t5531.6 is trying to provoke a failure of "git push"
due to a submodule check. When combined with b2ed944 the
push still fails, but for the wrong reason (because our
upstream setup does not exist, not because of the submodule).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no guarantee that strbuf_read_file must error out for
directories. On some operating systems (e.g., Debian GNU/kFreeBSD
wheezy), reading a directory gives its raw content:
$ head -c5 < / | cat -A
^AM-|^_^@^L$
As a result, 'git diff -O/' succeeds instead of erroring out on
these systems, causing t4056.5 "orderfile is a directory" to fail.
On some weird OS it might even make sense to pass a directory to the
-O option and this is not a common user mistake that needs catching.
Remove the test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to have a hardcoded upper limit of the number of
parents for an octopus merge, created via the graft mechanism.
* js/lift-parent-count-limit:
Remove the line length limit for graft files
The basic test used to leave unnecessary trash directories in the
t/ directory.
* jk/test-framework-updates:
t0000: drop "known breakage" test
t0000: simplify HARNESS_ACTIVE hack
t0000: set TEST_OUTPUT_DIRECTORY for sub-tests
"git merge-base --octopus" used to leave cleaning up suboptimal
result to the caller, but now it does the clean-up itself.
* bm/merge-base-octopus-dedup:
merge-base --octopus: reduce the result from get_octopus_merge_bases()
merge-base: separate "--independent" codepath into its own helper
Using the same username and password during the tests would not
catch a potential breakage of sending one when we should be sending
the other.
* jk/http-auth-tests-robustify:
use distinct username/password for http auth tests
Teach "cat-file --batch" to show delta-base object name for a
packed object that is represented as a delta.
* jk/oi-delta-base:
cat-file: provide %(deltabase) batch format
sha1_object_info_extended: provide delta base sha1s
"git add -A" (no other arguments) in a totally empty working tree
used to emit an error.
* nd/add-empty-fix:
add: don't complain when adding empty project root
Fetching 'frotz' branch with "git fetch", while having
'frotz/nitfol' remote-tracking branch from an earlier fetch, would
error out, primarily because the command has not been told to
remove anything on our side. In such a case, "git fetch --prune"
can be used to remove 'frotz/nitfol' to make room to fetch and
store 'frotz' remote-tracking branch.
* tm/fetch-prune:
fetch --prune: Run prune before fetching
fetch --prune: always print header url
Allow "git diff -O<file>" to be configured with a new configuration
variable.
* sb/diff-orderfile-config:
diff: add diff.orderfile configuration variable
diff: let "git diff -O" read orderfile from any file and fail properly
t4056: add new tests for "git diff -O"
read_sha1_file() that is the workhorse to read the contents given
an object name honoured object replacements, but there is no
corresponding mechanism to sha1_object_info() that is used to
obtain the metainfo (e.g. type & size) about the object, leading
callers to weird inconsistencies.
* cc/replace-object-info:
replace info: rename 'full' to 'long' and clarify in-code symbols
Documentation/git-replace: describe --format option
builtin/replace: unset read_replace_refs
t6050: add tests for listing with --format
builtin/replace: teach listing using short, medium or full formats
sha1_file: perform object replacement in sha1_object_info_extended()
t6050: show that git cat-file --batch fails with replace objects
sha1_object_info_extended(): add an "unsigned flags" parameter
sha1_file.c: add lookup_replace_object_extended() to pass flags
replace_object: don't check read_replace_refs twice
rename READ_SHA1_FILE_REPLACE flag to LOOKUP_REPLACE_OBJECT
Introduce "negative pathspec" magic, to allow "git log -- . ':!dir'" to
tell us "I am interested in everything but 'dir' directory".
* nd/negative-pathspec:
pathspec.c: support adding prefix magic to a pathspec with mnemonic magic
Support pathspec magic :(exclude) and its short form :!
glossary-content.txt: rephrase magic signature part
When no arguments are specified, $switch_to is empty so we end up
passing the empty string to "git merge-base --fork-point", which causes
an error. git-rebase carries on at this point, but in fact we have
failed to apply the fork-point operation.
It turns out that the test in t3400 that was meant to test this didn't
actually need the fork-point behaviour, so enhance it to make sure that
the fork-point is applied correctly. The modified test fails without
the change to git-rebase.sh in this patch.
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 48d25ca adds a new commit "7" to the repo that the next test case
in commit 1609488 clones from. But the next test case does not expect
this commit. For these tests, it's the bottom that's important, not
the top. Fix the expected commit list.
While at it, fix the default http port number to 5537. Otherwise when
t5536 learns to test httpd, running test in parallel may fail.
References:
48d25ca fetch: add --update-shallow to accept... - 2013-12-05
1609488 smart-http: support shallow fetch/clone - 2013-12-05
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Submodules" section of the "git rm" documentation mentions what will
happen when a submodule with a gitfile gets removed with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the removal, which does not remove the submodule from the
work tree like using the rm command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Submodules" section of the "git mv" documentation mentions what will
happen when a submodule with a gitfile gets moved with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the move, which does not update the work tree like using
the mv command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Reported-by: George Papanikolaou <g3orge.app@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to pop/apply a stash specified with an argument
containing IFS whitespace, git-stash will throw an error:
$ git stash pop 'stash@{two hours ago}'
Too many revisions specified: stash@{two hours ago}
This happens because word splitting is used to count non-option
arguments. Make use of rev-parse's --sq option to quote the arguments
for us to ensure a correct count. Add quotes where necessary.
Also add a test that verifies correct behaviour.
Helped-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
$ git diff
^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m
^[[1mindex aa4f0b2..17e113e 100644^[[m
^[[1m--- a/.mailfilter^[[m
^[[1m+++ b/.mailfilter^[[m
^[[36m@@ -1,11 +1,58 @@^[[m
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a remote-tracking branch named "frotz/nitfol" from a
previous fetch, and the upstream now has a branch named "frotz",
fetch would fail to remove "frotz/nitfol" with a "git fetch --prune"
from the upstream. git would inform the user to use "git remote
prune" to fix the problem.
Change the way "fetch --prune" works by moving the pruning operation
before the fetching operation. This way, instead of warning the user
of a conflict, it autmatically fixes it.
Signed-off-by: Tom Miller <jackerran@gmail.com>
Tested-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "fetch --prune" is run with no new refs to fetch, but it has refs
to prune. Then, the header url is not printed as it would if there were
new refs to fetch.
Output before this patch:
$ git fetch --prune remote-with-no-new-refs
x [deleted] (none) -> origin/world
Output after this patch:
$ git fetch --prune remote-with-no-new-refs
From https://github.com/git/git
x [deleted] (none) -> origin/test
Signed-off-by: Tom Miller <jackerran@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a simulated "known breakage" test means that the test
suite will always tell us there is a bug to be fixed, even
though it is only simulated.
The right way to test this is in a sub-test, that can also
check that we provide the correct exit status and output.
Fortunately, we already have such a test (added much later
by 5ebf89e).
We could arguably get rid of the simulated success test
immediately above, as well, as it is also redundant with the
tests added in 5ebf89e. However, it does not have the
annoying behavior of the "known breakage" test. It may also
be easier to debug if the test suite is truly broken, since
it is not a test-within-a-test, as the later tests are.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 517cd55 set HARNESS_ACTIVE unconditionally in
sub-tests, because that value affects the output of
"--verbose". t0000 needs stable output from its sub-tests,
and we may or may not be running under a TAP harness.
That commit made the decision to always set the variable,
since it has another useful side effect, which is
suppressing writes to t/test-results by the sub-tests (which
would just pollute the real results).
Since the last commit, though, the sub-tests have their own
test-results directories, so this is no longer an issue. We
can now update a few comments that are no longer accurate
nor necessary.
We can also revisit the choice of HARNESS_ACTIVE. Since we
must choose one value for stability, it's probably saner to
have it off. This means that future patches could test
things like the test-results writing, or the "--quiet"
option, which is currently ignored when run under a harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running t0000 produces more trash directories than expected and does
not clean up after itself:
$ ./t0000-basic.sh
[...]
$ ls -d trash\ directory.*
trash directory.failing-cleanup
trash directory.mixed-results1
trash directory.mixed-results2
trash directory.partial-pass
trash directory.test-verbose
trash directory.test-verbose-only-2
These scratch areas for sub-tests should be under the t0000 trash
directory, but because TEST_OUTPUT_DIRECTORY defaults to
TEST_DIRECTORY, which is exported to help sub-tests find
test-lib.sh, the sub-test trash directories are created under the
toplevel t/ directory instead. Because some of the sub-tests
simulate failures, their trash directories are kept around.
Fix it by explicitly setting TEST_OUTPUT_DIRECTORY appropriately for
sub-tests.
An alternative fix would be to pass the --root parameter that only
specifies where to put the trash directories, which would also work.
However, using TEST_OUTPUT_DIRECTORY is more futureproof in case
tests want to write more output in addition to the test-results/
(which are already suppressed in sub-tests using the HARNESS_ACTIVE
setting) and trash directories.
This fixes a regression introduced by 38b074d (t/test-lib.sh: fix
TRASH_DIRECTORY handling, 2013-04-14). Before that commit, the
TEST_OUTPUT_DIRECTORY setting was not respected consistently so most
tests did their work in a "trash" subdirectory of the current
directory instead of the output dir.
Signed-off-by: Jeff King <peff@peff.net>
Clarified-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The httpd server we set up to test git's http client code
knows about a single account, in which both the username and
password are "user@host" (the unusual use of the "@" here is
to verify that we handle the character correctly when URL
escaped).
This means that we may miss a certain class of errors in
which the username and password are mixed up internally by
git. We can make our tests more robust by having distinct
values for the username and password.
In addition to tweaking the server passwd file and the
client URL, we must teach the "askpass" harness to accept
multiple values. As a bonus, this makes the setup of some
tests more obvious; when we are expecting git to ask
only about the password, we can seed the username askpass
response with a bogus value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enum names SHORT/MEDIUM/FULL were too broad to be descriptive. And
they clashed with built-in symbols on platforms like Windows.
Clarify by giving them REPLACE_FORMAT_ prefix.
Rename 'full' format in "git replace --format=<name>" to 'long', to
match others (i.e. 'short' and 'medium').
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a few basic perf tests for the pack bitmap code to
show off its improvements. The tests are:
1. How long does it take to do a repack (it gets slower
with bitmaps, since we have to do extra work)?
2. How long does it take to do a clone (it gets faster
with bitmaps)?
3. How does a small fetch perform when we've just
repacked?
4. How does a clone perform when we haven't repacked since
a week of pushes?
Here are results against linux.git:
Test origin/master this tree
-----------------------------------------------------------------------
5310.2: repack to disk 33.64(32.64+2.04) 67.67(66.75+1.84) +101.2%
5310.3: simulated clone 30.49(29.47+2.05) 1.20(1.10+0.10) -96.1%
5310.4: simulated fetch 3.49(6.79+0.06) 5.57(22.35+0.07) +59.6%
5310.6: partial bitmap 36.70(43.87+1.81) 8.18(21.92+0.73) -77.7%
You can see that we do take longer to repack, but we do way
better for further clones. A small fetch performs a bit
worse, as we spend way more time on delta compression (note
the heavy user CPU time, as we have 8 threads) due to the
lack of name hashes for the bitmapped objects.
The final test shows how the bitmaps degrade over time
between packs. There's still a significant speedup over the
non-bitmap case, but we don't do quite as well (we have to
spend time accessing the "new" objects the old fashioned
way, including delta compression).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can read and write bitmaps, we can exercise them
with some basic functionality tests. These tests aren't
particularly useful for seeing the benefit, as the test
repo is too small for it to make a difference. However, we
can at least check that using bitmaps does not break anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts that use "merge-base --octopus" could do the reducing
themselves, but most of them are expected to want to get the reduced
results without having to do any work themselves.
Tests are taken from a message by Василий Макаров
<einmalfel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
We might want to vet the existing callers of the underlying
get_octopus_merge_bases() and find out if _all_ of them are doing
anything extra (like deduping) because the machinery can return
duplicate results. And if that is the case, then we may want to
move the dedupling down the callchain instead of having it here.
Support for grafts predates Git's strbuf, and hence it is understandable
that there was a hard-coded line length limit of 1023 characters (which
was chosen a bit awkwardly, given that it is *exactly* one byte short of
aligning with the 41 bytes occupied by a commit name and the following
space or new-line character).
While regular commit histories hardly win comprehensibility in general
if they merge more than twenty-two branches in one go, it is not Git's
business to limit grafts in such a way.
In this particular developer's case, the use case that requires
substantially longer graft lines to be supported is the visualization of
the commits' order implied by their changes: commits are considered to
have an implicit relationship iff exchanging them in an interactive
rebase would result in merge conflicts.
Thusly implied branches tend to be very shallow in general, and the
resulting thicket of implied branches is usually very wide; It is
actually quite common that *most* of the commits in a topic branch have
not even one implied parent, so that a final merge commit has about as
many implied parents as there are commits in said branch.
[jc: squashed in tests by Jonathan]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two packfiles that contain the same set of objects have
traditionally been named identically, but that made repacking a
repository that is already fully packed without any cruft with a
different packing parameter cumbersome. Update the convention to
name the packfile after the bytestream representation of the data,
not after the set of objects in it.
* jk/name-pack-after-byte-representation:
pack-objects doc: treat output filename as opaque
pack-objects: name pack files after trailer hash
sha1write: make buffer const-correct
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
"git cat-file --batch=", an admittedly useless command, did not
behave very well.
* jk/cat-file-regression-fix:
cat-file: handle --batch format with missing type/size
cat-file: pass expand_data to print_object_or_die
"git rev-parse <revs> -- <paths>" did not implement the usual
disambiguation rules the commands in the "git log" family used in
the same way.
* jk/rev-parse-double-dashes:
rev-parse: be more careful with munging arguments
rev-parse: correctly diagnose revision errors before "--"
Make "git push origin master" update the same ref that would be
updated by our 'master' when "git push origin" (no refspecs) is run
while the 'master' branch is checked out, which makes "git push"
more symmetric to "git fetch" and more usable for the triangular
workflow.
* jc/push-refmap:
push: also use "upstream" mapping when pushing a single ref
push: use remote.$name.push as a refmap
builtin/push.c: use strbuf instead of manual allocation
It can be useful for debugging or analysis to see which
objects are stored as delta bases on top of others. This
information is available by running `git verify-pack`, but
that is extremely expensive (and is harder than necessary to
parse).
Instead, let's make it available as a cat-file query format,
which makes it fast and simple to get the bases for a subset
of the objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This behavior was added in 07d7bed (add: don't complain when adding
empty project root - 2009-04-28) then broken by 84b8b5d (remove
match_pathspec() in favor of match_pathspec_depth() -
2013-07-14). Reinstate it.
Noticed-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log did not correctly handle decorations when a tag object referenced
another tag object that was no longer a ref, such as when the second tag was
deleted. The commit would not be decorated correctly because parse_object had
not been called on the second tag and therefore its tagged field had not been
filled in, resulting in none of the tags being associated with the relevant
commit.
Call parse_object to fill in this field if it is absent so that the chain of
tags can be dereferenced and the commit can be properly decorated. Include
tests as well to prevent future regressions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.orderfile acts as a default for the -O command line option.
[sb: split up aw's original patch; rework tests and docs, treat option
as pathname]
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Samuel Bronson <naesten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -O flag really shouldn't silently fail to do anything when given
a path that it can't read from.
However, it should be able to read from un-mmappable files, such as:
* pipes/fifos
* /dev/null: It's a character device (at least on Linux)
* ANY empty file:
Quoting Linux mmap(2), "SUSv3 specifies that mmap() should fail if
length is 0. However, in kernels before 2.6.12, mmap() succeeded in
this case: no mapping was created and the call returned addr. Since
kernel 2.6.12, mmap() fails with the error EINVAL for this case."
We especially want "-O/dev/null" to work, since we will be documenting
it as the way to cancel "diff.orderfile" when we add that.
(Note: "-O/dev/null" did have the right effect, since the existing error
handling essentially worked out to "silently ignore the orderfile". But
this was probably more coincidence than anything else.)
So, lets toss all of that logic to get the file mmapped and just use
strbuf_read_file() instead, which gives us decent error handling
practically for free.
Signed-off-by: Samuel Bronson <naesten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adapted from $gmane/236427 by Anders Waldenborg, "diff: Add
diff.orderfile configuration variable".
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Samuel Bronson <naesten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be more careful when parsing remote repository URL given in the
scp-style host:path notation.
* tb/clone-ssh-with-colon-for-port:
git_connect(): use common return point
connect.c: refactor url parsing
git_connect(): refactor the port handling for ssh
git fetch: support host:/~repo
t5500: add test cases for diag-url
git fetch-pack: add --diag-url
git_connect: factor out discovery of the protocol and its parts
git_connect: remove artificial limit of a remote command
t5601: add tests for ssh
t5601: remove clear_ssh, refactor setup_ssh_wrapper
"git commit -v" appends the patch to the log message before
editing, and then removes the patch when the editor returned
control. However, the patch was not stripped correctly when the
first modified path was a submodule.
* jl/commit-v-strip-marker:
commit -v: strip diffs and submodule shortlogs from the commit message
"git am --abort" sometimes complained about not being able to write
a tree with an 0{40} object in it.
* jk/two-way-merge-corner-case-fix:
t1005: add test for "read-tree --reset -u A B"
t1005: reindent
unpack-trees: fix "read-tree -u --reset A B" with conflicted index
"git cat-file --batch-check=ok" did not check the existence of the
named object.
* sb/sha1-loose-object-info-check-existence:
sha1_loose_object_info(): do not return success on missing object
"git diff -- ':(icase)makefile'" was unnecessarily rejected at the
command line parser.
* nd/magic-pathspec:
diff: restrict pathspec limitations to diff b/f case only
470faf9 diff: move no-index detection to builtin/diff.c breaks the error
message for "git diff --no-index", when the command is executed outside
of a git repository and the wrong number of arguments are given. 6df5762
diff: don't read index when --no-index is given fixes the problem.
Add a test to guard against similar breakages in the future.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/scripts-updates:
remove #!interpreter line from shell libraries
test: replace shebangs with descriptions in shell libraries
test: make FILEMODE a lazy prereq
contrib: remove git-p4import
mark contributed hooks executable
mark perl test scripts executable
mark Windows build scripts executable
The "--tags" option to "git fetch" used to be literally a synonym to
a "refs/tags/*:refs/tags/*" refspec, which meant that (1) as an
explicit refspec given from the command line, it silenced the lazy
"git fetch" default that is configured, and (2) also as an explicit
refspec given from the command line, it interacted with "--prune"
to remove any tag that the remote we are fetching from does not
have.
This demotes it to an option; with it, we fetch all tags in
addition to what would be fetched without the option, and it does
not interact with the decision "--prune" makes to see what
remote-tracking refs the local has are missing the remote
counterpart.
* mh/fetch-tags-in-addition-to-normal-refs: (23 commits)
fetch: improve the error messages emitted for conflicting refspecs
handle_duplicate(): mark error message for translation
ref_remote_duplicates(): extract a function handle_duplicate()
ref_remove_duplicates(): simplify loop logic
t5536: new test of refspec conflicts when fetching
ref_remove_duplicates(): avoid redundant bisection
git-fetch.txt: improve description of tag auto-following
fetch-options.txt: simplify ifdef/ifndef/endif usage
fetch, remote: properly convey --no-prune options to subprocesses
builtin/remote.c:update(): use struct argv_array
builtin/remote.c: reorder function definitions
query_refspecs(): move some constants out of the loop
fetch --prune: prune only based on explicit refspecs
fetch --tags: fetch tags *in addition to* other stuff
fetch: only opportunistically update references based on command line
get_expanded_map(): avoid memory leak
get_expanded_map(): add docstring
builtin/fetch.c: reorder function definitions
get_ref_map(): rename local variables
api-remote.txt: correct section "struct refspec"
...
git diff --no-index ... currently reads the index, during setup, when
calling gitmodules_config(). This results in worse performance when the
index is not actually needed. This patch avoids calling
gitmodules_config() when the --no-index option is given. The times for
executing "git diff --no-index" in the WebKit repository are improved as
follows:
Test HEAD~3 HEAD
------------------------------------------------------------------
4001.1: diff --no-index 0.24(0.15+0.09) 0.01(0.00+0.00) -95.8%
An additional improvement of this patch is that "git diff --no-index" no
longer breaks when the index file is corrupt, which makes it possible to
use it for investigating the broken repository.
To improve the possible usage as investigation tool for broken
repositories, setup_git_directory_gently() is also not called when the
--no-index option is given.
Also add a test to guard against future breakages, and a performance
test to show the improvements.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking to see if some objects are of the same type
and when displaying the type of objects, git replace uses
the sha1_object_info() function.
Unfortunately this function by default respects replace
refs, so instead of the type of a replaced object, it
gives the type of the replacement object which might
be different.
To fix this bug, and because git replace should work at a
level before replacement takes place, let's unset the
read_replace_refs global variable at the beginning of
cmd_replace().
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds tests for "git replace -l --format=<fmt>".
'short', 'medium' and 'full' are the only allowed values
for <fmt>.
'short' is the same as with no --format option.
Tests for 'medium' and 'full' are the most needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_object_info_extended() should perform object replacement
if it is needed.
The simplest way to do that is to make it call
lookup_replace_object_extended().
And now its "unsigned flags" parameter is used as it is passed
to lookup_replace_object_extended().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --batch is passed to git cat-file, the sha1_object_info_extended()
function is used to get information about the objects passed to
git cat-file.
Unfortunately sha1_object_info_extended() doesn't take care of
object replacement properly, so it will often fail with a
message like this:
$ echo a3fb2e1845a1aaf129b7975048973414dc172173 | git cat-file --batch
a3fb2e1845a1aaf129b7975048973414dc172173 commit 231
fatal: object a3fb2e1845a1aaf129b7975048973414dc172173 change size!?
The goal of this patch is to show this breakage.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 98e2092 taught cat-file to stream blobs with --batch,
which requires that we look up the object type before
loading it into memory. As a result, we now print the
object header from information in sha1_object_info, and the
actual contents from the read_sha1_file. We double-check
that the information we printed in the header matches the
content we are about to show.
Later, commit 93d2a60 allowed custom header lines for
--batch, and commit 5b08640 made type lookups optional. As a
result, specifying a header line without the type or size
means that we will not look up those items at all.
This causes our double-checking to erroneously die with an
error; we think the type or size has changed, when in fact
it was simply left at "0".
For the size, we can fix this by only doing the consistency
double-check when we have retrieved the size via
sha1_object_info. In the case that we have not retrieved the
value, that means we also did not print it, so there is
nothing for us to check that we are consistent with.
We could do the same for the type. However, besides our
consistency check, we also care about the type in deciding
whether to stream or not. So instead of handling the case
where we do not know the type, this patch instead makes sure
that we always trigger a type lookup when we are printing,
so that even a format without the type will stream as we
would in the normal case.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches "prune" to remove shallow roots that are no longer
reachable from any refs (e.g. when the relevant refs are removed).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone_local() does not handle $SRC/shallow. It could be made so, but
it's simpler to use fetch-pack/upload-pack instead.
This used to be caught by the check in upload-pack, which is triggered
by transport_get_remote_refs(), even in local clone case. The check is
now gone and check_everything_connected() should catch the result
incomplete repo. But check_everything_connected() will soon be skipped
in local clone case, opening a door to corrupt repo. This patch should
close that door.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic 8 steps to update .git/shallow does not fully apply here
because the user may choose to accept just a few refs (while fetch
always accepts all refs). The steps are modified a bit.
1-6. same as before. After calling assign_shallow_commits_to_refs at
step 6, each shallow commit has a bitmap that marks all refs that
require it.
7. mark all "ours" shallow commits that are reachable from any
refs. We will need to do the original step 7 on them later.
8. go over all shallow commit bitmaps, mark refs that require new
shallow commits.
9. setup a strict temporary shallow file to plug all the holes, even
if it may cut some of our history short. This file is used by all
hooks. The hooks could use --shallow-file=$GIT_DIR/shallow to
overcome this and reach everything in current repo.
10. go over the new refs one by one. For each ref, do the reachability
test if it needs a shallow commit on the list from step 7. Remove
it if it's reachable from our refs. Gather all required shallow
commits, run check_everything_connected() with the new ref, then
install them to .git/shallow.
This mode is disabled by default and can be turned on with
receive.shallowupdate
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same steps are done as in when --update-shallow is not given. The
only difference is we now add all shallow commits in "ours" and
"theirs" to .git/shallow (aka "step 8").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "fetch --depth=N" where N exceeds the longest chain of history in
the source repo, usually we just send an "unshallow" line to the
client so full history is obtained.
When the source repo is shallow we need to make sure to "unshallow"
the current shallow point _and_ "shallow" again when the commit
reaches its shallow bottom in the source repo.
This should fix both cases: large <N> and --unshallow.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch just put together pieces from the 8 steps patch. We stop at
step 7 and reject refs that require new shallow commits.
Note that, by rejecting refs that require new shallow commits, we
leave dangling objects in the repo, which become "object islands" by
the next "git fetch" of the same source.
If the first fetch our "ours" set is zero and we do practically
nothing at step 7, "ours" is full at the next fetch and we may need to
walk through commits for reachability test. Room for improvement.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 15a147e (rebase: use @{upstream} if no upstream specified,
2011-02-09) says:
Make it default to 'git rebase @{upstream}'. That is also what
'git pull [--rebase]' defaults to, so it only makes sense that
'git rebase' defaults to the same thing.
but that isn't actually the case. Since commit d44e712 (pull: support
rebased upstream + fetch + pull --rebase, 2009-07-19), pull has actually
chosen the most recent reflog entry which is an ancestor of the current
branch if it can find one.
Add a '--fork-point' argument to git-rebase that can be used to trigger
this behaviour. This option is turned on by default if no non-option
arguments are specified on the command line, otherwise we treat an
upstream specified on the command-line literally.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the function is_local() in transport.c public, rename it into
url_is_local_not_ssh() and use it in both transport.c and connect.c
Use a protocol "local" for URLs for the local file system.
One note about using file:// under Windows:
The (absolute) path on Unix like system typically starts with "/".
When the host is empty, it can be omitted, so that a shell scriptlet
url=file://$pwd
will give a URL like "file:///home/user/repo".
Windows does not have the same concept of a root directory located in "/".
When parsing the URL allow "file://C:/user/repo"
(even if RFC1738 indicates that "file:///C:/user/repo" should be used).
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use get_host_and_port() even for ssh.
Remove the variable port git_connect(), and simplify parse_connect_url()
Use only one return point in git_connect(), doing the free() and return conn.
t5601 had 2 corner test cases which now pass.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation (in urls.txt) says that
"ssh://host:/~repo",
"host:/~repo" or
"host:~repo"
specify the repository "repo" in the home directory at "host".
This has not been working for "host:/~repo".
Before commit 356bec "Support [address] in URLs", the comparison
"url != hostname" could be used to determine if the URL had a scheme
or not: "ssh://host/host" != "host".
However, after 356bec "[::1]" was converted into "::1", yielding
url != hostname as well. To fix this regression, don't use
"if (url != hostname)", but look at the separator instead.
Rename the variable "c" into "separator" to make it easier to read.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases using git fetch-pack --diag-url:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rev-parse understands that a "--" may separate revisions and
filenames, and that anything after the "--" is taken as-is.
However, it does not understand that anything before the
token must be a revision (which is the usual rule
implemented by the setup_revisions parser).
Since rev-parse prefers revisions to files when parsing
before the "--", we end up with the correct result (if such
an argument is a revision, we parse it as one, and if it is
not, it is an error either way). However, we misdiagnose
the errors:
$ git rev-parse foobar -- >/dev/null
fatal: ambiguous argument 'foobar': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
$ >foobar
$ git rev-parse foobar -- >/dev/null
fatal: bad flag '--' used after filename
In both cases, we should know that the real error is that
"foobar" is meant to be a revision, but could not be
resolved.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --prompt option is set, git-difftool displays a prompt for each
modified file to be viewed in an external diff program. At that
point, it could be useful to display a counter and the total number
of files in the diff queue.
Below is the current difftool prompt for the first of 5 modified files:
Viewing: 'diff.c'
Launch 'vimdiff' [Y/n]:
Consider the modified prompt:
Viewing (1/5): 'diff.c'
Launch 'vimdiff' [Y/n]:
The current GIT_EXTERNAL_DIFF mechanism does not tell the number of
paths in the diff queue nor the current counter. To make this
"counter/total" info available for GIT_EXTERNAL_DIFF programs
without breaking existing ones by doing the following:
- Keep track of the number of paths shown so far in diff_options;
- Export two new environment variables from run_external_diff() to
show the total number of paths (from diff_queue_struct) and the
current value of the counter (from diff_options); and
- Update git-difftool--helper to use these two environment variables.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-config used a static match array to hold the matches we want to
unset/replace when using --unset or --replace-all. Use a
variable-sized array instead.
This in particular fixes the symptoms git-svn had when storing large
numbers of svn-remote.*.added-placeholder entries in the config file.
While the tests are rather more paranoid than just --unset and
--replace-all, the other operations already worked. Indeed git-svn's
usage only breaks the first time *after* creating so many entries,
when it wants to unset and re-add them all.
Reported-by: Jess Hottenstein <jess.hottenstein@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -- ':(icase)makefile'" were rejected unnecessarily.
This needs to be merged to 'maint' later.
* nd/magic-pathspec:
diff: restrict pathspec limitations to diff b/f case only
Add a few formatting directives to "git for-each-ref --format=...",
to paint them in color, etc.
* rr/for-each-ref-decoration:
for-each-ref: avoid color leakage
for-each-ref: introduce %(color:...) for color
for-each-ref: introduce %(upstream:track[short])
for-each-ref: introduce %(HEAD) asterisk marker
t6300 (for-each-ref): don't hardcode SHA-1 hexes
t6300 (for-each-ref): clearly demarcate setup
Updates to remote-bzr and remote-hg in contrib.
* rh/remote-hg-bzr-updates:
remote-bzr, remote-hg: fix email address regular expression
test-hg.sh: help user correlate verbose output with email test
test-hg.sh: fix duplicate content strings in author tests
test-hg.sh: avoid obsolete 'test' syntax
test-hg.sh: eliminate 'local' bashism
test-bzr.sh, test-hg.sh: prepare for change to push.default=simple
test-bzr.sh, test-hg.sh: allow running from any dir
test-lib.sh: convert $TEST_DIRECTORY to an absolute path
Our current scheme for naming packfiles is to calculate the
sha1 hash of the sorted list of objects contained in the
packfile. This gives us a unique name, so we are reasonably
sure that two packs with the same name will contain the same
objects.
It does not, however, tell us that two such packs have the
exact same bytes. This makes things awkward if we repack the
same set of objects. Due to run-to-run variations, the bytes
may not be identical (e.g., changed zlib or git versions,
different source object reuse due to new packs in the
repository, or even different deltas due to races during a
multi-threaded delta search).
In theory, this could be helpful to a program that cares
that the packfile contains a certain set of objects, but
does not care about the particular representation. In
practice, no part of git makes use of that, and in many
cases it is potentially harmful. For example, if a dumb http
client fetches the .idx file, it must be sure to get the
exact .pack that matches it. Similarly, a partial transfer
of a .pack file cannot be safely resumed, as the actual
bytes may have changed. This could also affect a local
client which opened the .idx and .pack files, closes the
.pack file (due to memory or file descriptor limits), and
then re-opens a changed packfile.
In all of these cases, git can detect the problem, as we
have the sha1 of the bytes themselves in the pack trailer
(which we verify on transfer), and the .idx file references
the trailer from the matching packfile. But it would be
simpler and more efficient to actually get the correct
bytes, rather than noticing the problem and having to
restart the operation.
This patch simply uses the pack trailer sha1 as the pack
name. It should be similarly unique, but covers the exact
representation of the objects. Other parts of git should not
care, as the pack name is returned by pack-objects and is
essentially opaque.
One test needs to be updated, because it actually corrupts a
pack and expects that re-packing the corrupted bytes will
use the same name. It won't anymore, but we can easily just
use the name that pack-objects hands back.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-v' option of "git commit" the diff added to the commit
message temporarily for editing is stripped off after the user exited the
editor by searching for "\ndiff --git " and truncating the commmit message
there if it is found.
But this approach has two problems:
- when the commit message itself contains a line starting with
"diff --git" it will be truncated there prematurely; and
- when the "diff.submodule" setting is set to "log", the diff may
start with "Submodule <hash1>..<hash2>", which will be left in
the commit message while it shouldn't.
Fix that by introducing a special scissor separator line starting with the
comment character ('#' or the core.commentChar config if set) followed by
two lines describing what it is for. The scissor line - which will not be
translated - is used to reliably detect the start of the diff so it can be
chopped off from the commit message, no matter what the user enters there.
Turn a known test failure fixed by this change into a successful test;
also add one for a diff starting with a submodule log and another one for
proper handling of the comment char.
Reported-by: Ari Pollak <ari@debian.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch-check=ok" did not check the existence of the
named object.
* sb/sha1-loose-object-info-check-existence:
sha1_loose_object_info(): do not return success on missing object
Fix a rather longstanding corner-case bug in twoway "reset to
there" merge, which is most often seen in "git am --abort".
* jk/two-way-merge-corner-case-fix:
t1005: add test for "read-tree --reset -u A B"
t1005: reindent
unpack-trees: fix "read-tree -u --reset A B" with conflicted index
People often wished a way to tell "git log --branches" (and "git
log --remotes --not --branches") to exclude some local branches
from the expansion of "--branches" (similarly for "--tags", "--all"
and "--glob=<pattern>"). Now they have one.
* jc/ref-excludes:
rev-parse: introduce --exclude=<glob> to tame wildcards
rev-list --exclude: export add/clear-ref-exclusion and ref-excluded API
rev-list --exclude: tests
document --exclude option
revision: introduce --exclude=<glob> to tame wildcards
Enhance "rev-parse --parseopt" mode to help parsing options with
an optional parameter.
* nv/parseopt-opt-arg:
rev-parse --parseopt: add the --stuck-long mode
Use the word 'stuck' instead of 'sticked'
Code the logic in "pull --rebase" that figures out a fork point
from reflog entries in C.
* jc/merge-base-reflog:
merge-base: teach "--fork-point" mode
merge-base: use OPT_CMDMODE and clarify the command line parsing
A behavior change, but a worthwhile one: "git submodule foreach"
was treating its arguments as part of a single command to be
concatenated and passed to a shell, making writing buggy
scripts too easy.
This patch preserves the old "just pass it to the shell" behavior
when a single argument is passed to 'git submodule foreach' and
moves to a new "skip the shell and use the arguments passed
unmolested" behavior when more than one argument is passed.
The old behavior (always concatenating and passing to the shell)
was similar to the 'ssh' command, while the new behavior (switching
on the number of arguments) is what 'xterm -e' does.
May need more thought to make sure this change is advertised well
so that scripts that used multiple arguments but added their own
extra layer of quoting are not broken.
* ak/submodule-foreach-quoting:
submodule foreach: skip eval for more than one argument
In t5000, we test the built-in ".tar.gz" config for
git-archive. To make our tests portable, we check that we
have a way to both gzip and gunzip, and we respected
environment variables to point to alternate commands for
doing these operations.
However, the $GZIP variable did not actually do anything, as
changing it would not affect the baked-in value in
archive-tar.c. Moreover, setting the variable $GZIP
influences gzip itself. From the gzip man page:
The environment variable GZIP can hold a set of default
options for gzip. These options are interpreted first and
can be overwritten by explicit command line parameters.
We could rename this variable, and use it to set up custom
config (or even have a Makefile knob to affect the built
binary), but it is not worth the trouble; nobody has ever
reported a problem with the baked-in default, and they can
always change it via config if they need to. Let's just drop
the variable and use "gzip" in the test (keeping the
prerequisite, of course).
While we're at it, we can drop the GUNZIP variable and
prerequisite; it uses "gzip -d", so if we have GZIP, we
will have both.
We can also use test_lazy_prereq for the gzip prerequisite,
which is simpler and behaves more consistently with the rest
of git (e.g., by making output available when the test is
run with "-v").
Noticed-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more tests testing all the combinations:
-IPv4 or IPv6
-path starting with "/" or with "/~"
-with and without the ssh:// scheme
Some tests fail; they need updates in connect.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8d3d28f5 added test cases for URLs which should be ssh.
Remove the function clear_ssh, use test_when_finished to clean up.
Introduce the function setup_ssh_wrapper, which could be factored
out together with expect_ssh.
Tighten one test and use "foo:bar" instead of "./foo:bar",
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user is using the 'upstream' mode, these commands:
$ git push
$ git push origin
would find the 'upstream' branch for the current branch, and then
push the current branch to update it. However, pushing a single
branch explicitly, i.e.
$ git push origin $(git symbolic-ref --short HEAD)
would not go through the same ref mapping process, and ends up
updating the branch at 'origin' of the same name, which may not
necessarily be the upstream of the branch being pushed.
In the spirit similar to the previous one, map a colon-less refspec
using the upstream mapping logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since f2690487 (fetch: opportunistically update tracking refs,
2013-05-11), we stopped taking a non-storing refspec given on the
command line of "git fetch" literally, and instead started mapping
it via remote.$name.fetch refspecs. This allows
$ git fetch origin master
from the 'origin' repository, which is configured with
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
to update refs/remotes/origin/master with the result, as if the
command line were
$ git fetch origin +master:refs/remotes/origin/master
to reduce surprises and improve usability. Before that change, a
refspec on the command line without a colon was only to fetch the
history and leave the result in FETCH_HEAD, without updating the
remote-tracking branches.
When you are simulating a fetch from you by your mothership with a
push by you into your mothership, instead of having:
[remote "satellite"]
fetch = +refs/heads/*:refs/remotes/satellite/*
on the mothership repository and running:
mothership$ git fetch satellite
you would have:
[remote "mothership"]
push = +refs/heads/*:refs/remotes/satellite/*
on your satellite machine, and run:
satellite$ git push mothership
Because we so far did not make the corresponding change to the push
side, this command:
satellite$ git push mothership master
does _not_ allow you on the satellite to only push 'master' out but
still to the usual destination (i.e. refs/remotes/satellite/master).
Implement the logic to map an unqualified refspec given on the
command line via the remote.$name.push refspec. This will bring a
bit more symmetry between "fetch" and "push".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git used to trim the trailing slash, and make the command equivalent
to 'git mv file no-such-dir', which created the file no-such-dir
(while the trailing slash explicitly stated that it could only be a
directory).
This patch skips the trailing slash removal for the destination
path. The path with its trailing slash is passed to rename(2),
which errors out with the appropriate message:
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
Original-patch-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submodule.$name.update is given as hint from the upstream in
the .gitmodules file, we used to blindly copy it to .git/config,
unless there already is a value defined for the submodule.
However, there is no reason to expect that the update mode hinted by
the upstream is available in the version of Git the user is using,
and a really custom "!cmd" prepared by an upstream person running on
Linux may not even be available to a user on Windows. It is simply
irresponsible to copy the setting blindly and to attempt to use it
during a later "submodule update" without validating it first.
Just show the suggested value to the diagnostic output, and set the
value to 'none' in the configuration, if it is not one of the ones
that are known to be supported by this version of Git.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a shell snippet meant to be sourced by other shell scripts, an
opening #! line does more harm than good.
The harm:
- When the shell library is sourced, the interpreter and options from
the #! line are not used. Specifying a particular shell can
confuse the reader into thinking it is safe for the shell library
to rely on idiosyncrasies of that shell.
- Using #! instead of a plain comment drops a helpful visual clue
that this is a shell library and not a self-contained script.
- Tools such as lintian can use a #! line to tell when an
installation script has failed by forgetting to set a script
executable. This check does not work if shell libraries also start
with a #! line.
The good:
- Text editors notice the #! line and use it for syntax highlighting
if you try to edit the installed scripts (without ".sh" suffix) in
place.
The use of the #! for file type detection is not needed because Git's
shell libraries are meant to be edited in source form (with ".sh"
suffix). Replace the opening #! lines with comments.
This involves tweaking the test harness's valgrind support to find
shell libraries by looking for "# " in the first line instead of "#!"
(see v1.7.6-rc3~7, 2011-06-17).
Suggested by Russ Allbery through lintian. Thanks to Jeff King and
Clemens Buchacher for further analysis.
Tested by searching for non-executable scripts with #! line:
find . -name .git -prune -o -type f -not -executable |
while read file
do
read line <"$file"
case $line in
'#!'*)
echo "$file"
;;
esac
done
The only remaining scripts found are templates for shell scripts
(unimplemented.sh, wrap-for-bin.sh) and sample input used in tests
(t/t4034/perl/{pre,post}).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, test authors don't need to remember to source
lib-prereq-FILEMODE.sh before using the FILEMODE prereq to guard tests
that rely on the executable bit being honored when checking out files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scripts are not run directly as part of a normal build, so no
one noticed that they did not have the +x bit. Mark them executable
to make it more obvious that they can be run directly (when debugging,
for example).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git v1.4.3, we introduced a new loose object format that
encoded some object information outside of the zlib stream.
Ultimately the format was dropped in v1.5.3, but we kept the
reading side around to help people migrate objects. Each
time we open a loose object, we use a heuristic to check
whether it is in the normal loose format, or the
experimental one.
This heuristic is robust in the face of valid data, but it
tends to treat corrupted or garbage data as an experimental
object. With the regular format, we would notice quickly
that zlib's crc does not check out and complain. With the
experimental object, we are likely to extract a nonsensical
object size and try to allocate a huge buffer, resulting in
xmalloc calling "die".
This latter behavior is much worse, for two reasons. One,
git reports an allocation error when the real error is
corruption. And two, the program dies unconditionally, so
you cannot even run fsck (which would otherwise ignore the
broken object and keep going).
We could try to improve the heuristic to err on the side of
normal objects in the face of corruption, but there is
really little point. The experimental format is long-dead,
and was never enabled by default to begin with. We can
instead simply remove it. The only affected repository would
be one that explicitly set core.legacyheaders in 2007, and
then never repacked in the intervening 6 years.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin_diff_b_f() needs a path, not pathspec. Other modes in diff
can deal with pathspec just fine. But because of the current
GUARD_PATHSPEC() location, other modes also reject :(glob) and
:(icase).
Move GUARD_PATHSPEC(), and the "path" assignment statement, which is
the reason of this GUARD_PATHSPEC(), inside builtin_diff_b_f().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make sure that an invocation like the following doesn't leak color,
$ git for-each-ref --format='%(subject)%(color:green)'
auto-reset at the end of the format string when the last color token
seen in the format string isn't a color-reset.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance 'git for-each-ref' with color formatting options. You can now
use the following format in for-each-ref:
%(color:green)%(refname:short)%(color:reset)
where color names are described in color.branch.*.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce %(upstream:track) to display "[ahead M, behind N]" and
%(upstream:trackshort) to display "=", ">", "<", or "<>"
appropriately (inspired by contrib/completion/git-prompt.sh).
Now you can use the following format in for-each-ref:
%(refname:short)%(upstream:trackshort)
to display refs with terse tracking information.
Note that :track and :trackshort only work with "upstream", and error
out when used with anything else.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git branch' shows which branch you are currently on with an '*', but
'git for-each-ref' misses this feature. So, extend its format with
%(HEAD) for the same effect.
Now you can use the following format in for-each-ref:
%(HEAD) %(refname:short)
to display an asterisk next to the current ref.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use rev-parse in its place, making it easier for future patches to
modify the test script.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Condense the two-step setup into one step, and give it an appropriate
name.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $TEST_DIRECTORY is specified in the environment, convert the value
to an absolute path to ensure that it remains valid even when 'cd' is
used.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f2e0873 (branch: report invalid tracking branch as gone) removed
an early return from fill_tracking_info() in the path taken when 'git
branch -v' lists a branch in sync with its upstream. This resulted in an
unconditionally added space in front of the subject line:
$ git branch -v
* master f5eb3da commit pushed to upstream
topic f935eb6 unpublished topic
Instead, only add the trailing space if a decoration have been added.
To catch this kind of whitespace breakage in the tests, be a bit less
smart when filtering the output through sed.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tar-tree" has been a thin wrapper around "git archive" since commit
fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to
git-archive, 2006-09-24), which also made it print a message indicating
that git-tar-tree is deprecated.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise they cannot know when to force the push or not (other than
hacks).
Tests-by: Richard Hansen <rhansen@bbn.com>
Documentation-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_update() in the submodule script tries to preserve the options given
on the command line in the "orig_flags" variable to pass them on into the
recursion when the '--recursive' option is given. But this isn't necessary
because all the variables set by the options will be seen in the recursion
too as that is achieved by executing "eval cmd_update".
The same has already been done for cmd_status() in e15bec0ec, so let's
clean up cmd_update() likewise. Also add a test to make sure that a
submodule name given on the command line is not passed into the recursion
(which was the goal of adding the orig_flags variable in 98dbe63db).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction between use of Perl in our test suite and NO_PERL
has been clarified a bit.
* jn/test-prereq-perl-doc:
t/README: tests can use perl even with NO_PERL
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
We did not handle cases where http transport gets redirected during
the authorization request (e.g. from http:// to https://).
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
The fall-back parsing of commit objects with broken author or
committer lines were less robust than ideal in picking up the
timestamps.
* jk/split-broken-ident:
split_ident: parse timestamp from end of line
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
Since 052fe5ea (sha1_loose_object_info: make type lookup optional,
2013-07-12), sha1_loose_object_info() returns happily without
checking if the object in question exists, which is not what the the
caller sha1_object_info_extended() expects; the caller does not even
bother checking the existence of the object itself.
Noticed-by: Sven Brauch <svenbrauch@googlemail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/solaris-sed-tr-test-portability:
t4015: simplify sed command that is not even seen by sed
Avoid difference in tr semantics between System V and BSD
Change sed i\ usage to something Solaris' sed can handle
Noticed by Andreas Schwab; \<LF> inside a double quotes pair is
eaten by the shell to become an empty string and is not doing
anything.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "rev-parse" the same "I'm going to glob, but omit the ones
that match these patterns" feature as "rev-list".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for the --exclude=<glob> feature.
A few tests are added for cases where use of globbing and
"--exclude" results in no positive revisions:
* "--exclude=<glob>" before "--all" etc. resulted in no results;
* "--stdin" is used but no input was given;
* "--all" etc. is used but no matching refs are found.
Currently, we fail such a request with the same error message we
would give to a command line that does not specify any positive
revision (e.g. "git rev-list<ENTER>").
We may want to treat these cases differently and not error out, but
the logic to detect that would be common to all of them, so I'd
leave it outside this topic for now, and stop at adding these tests
as food-for-thought.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/tests-windows-port-fix:
tests: undo special treatment of CRLF for Windows
Windows: a test_cmp that is agnostic to random LF <> CRLF conversions
t5300-pack-object: do not compare binary data using test_cmp
"git reset -p HEAD" has codepath to special case it from resetting
to contents of other commits, but recent change broke it.
* jk/reset-p-current-head-fix:
reset: pass real rev name to add--interactive
add-interactive: handle unborn branch in patch mode
Moving a regular file in a repository with a .gitmodules file was
producing a warning 'Could not find section in .gitmodules where
path=<filename>'.
* jl/submodule-mv:
mv: Fix spurious warning when moving a file in presence of submodules
Add the --stuck-long option to output the options in their long form
if available, and with their arguments stuck.
Contrary to the default form (non stuck arguments and short options),
this can be parsed unambiguously when using options with optional
arguments :
- in the non stuck form, when an option is taking an optional argument
you cannot know if the next argument is its optional argument, or the
next option.
- the long options form allows to differentiate between an empty argument
'--option=' and an unset argument '--option', which is not possible
with short options.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the code intended.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The printf utility provided by coreutils when interpreting '\%o' format
does not recognize %o as formatting directive. For example
printf '\%o 0 returns \%o and warning: ignoring excess arguments,
starting with ‘0’, which results in failed tests in
t5309-pack-delta-cycles.sh. In most shells the test ends with success as
the printf is a builtin utility.
Fix it by using '\\%o' which is interpreted consistently in all versions
of printf.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we find two refspecs that want to update the same local reference,
emit an error message that is more informative based on whether one of
the conflicting refspecs is an opportunistic update during a fetch
with explicit command-line refspecs. And especially, do not die if an
opportunistic reference update conflicts with an express wish of the
user; rather, just emit a warning and skip the opportunistic reference
update.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some tests that "git fetch" handles refspec conflicts (i.e., when
the same local reference should be updated from two different remote
references) correctly.
There is a small bug when updating references opportunistically,
namely that an explicit user wish like
git fetch origin \
refs/heads/branch1:refs/remotes/origin/branch2 \
refs/heads/branch2:refs/remotes/origin/branch1
should override a configured refspec like
+refs/heads/*:refs/remotes/origin/*
The current code incorrectly treats this as a fatal error.
In a few commits we will improve the error messages for refspec
conflicts in general and also turn this buggy fatal error into a
warning.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old behavior of "fetch --prune" was to prune whatever was being
fetched. In particular, "fetch --prune --tags" caused tags not only
to be fetched, but also to be pruned. This is inappropriate because
there is only one tags namespace that is shared among the local
repository and all remotes. Therefore, if the user defines a local
tag and then runs "git fetch --prune --tags", then the local tag is
deleted. Moreover, "--prune" and "--tags" can also be configured via
fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it
even less obvious that an invocation of "git fetch" could result in
tag lossage.
Since the command "git remote update" invokes "git fetch", it had the
same problem.
The command "git remote prune", on the other hand, disregarded the
setting of remote.<name>.tagopt, and so its behavior was inconsistent
with that of the other commands.
So the old behavior made it too easy to lose tags. To fix this
problem, change "fetch --prune" to prune references based only on
refspecs specified explicitly by the user, either on the command line
or via remote.<name>.fetch. Thus, tags are no longer made subject to
pruning by the --tags option or the remote.<name>.tagopt setting.
However, tags *are* still subject to pruning if they are fetched as
part of a refspec, and that is good. For example:
* On the command line,
git fetch --prune 'refs/tags/*:refs/tags/*'
causes tags, and only tags, to be fetched and pruned, and is
therefore a simple way for the user to get the equivalent of the old
behavior of "--prune --tag".
* For a remote that was configured with the "--mirror" option, the
configuration is set to include
[remote "name"]
fetch = +refs/*:refs/*
, which causes tags to be subject to pruning along with all other
references. This is the behavior that will typically be desired for
a mirror.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, fetch's "--tags" option was considered equivalent to
specifying the refspec "refs/tags/*:refs/tags/*" on the command line;
in particular, it caused the remote.<name>.refspec configuration to be
ignored.
But it is not very useful to fetch tags without also fetching other
references, whereas it *is* quite useful to be able to fetch tags *in
addition to* other references. So change the semantics of this option
to do the latter.
If a user wants to fetch *only* tags, then it is still possible to
specifying an explicit refspec:
git fetch <remote> 'refs/tags/*:refs/tags/*'
Please note that the documentation prior to 1.8.0.3 was ambiguous
about this aspect of "fetch --tags" behavior. Commit
f0cb2f137c 2012-12-14 fetch --tags: clarify documentation
made the documentation match the old behavior. This commit changes
the documentation to match the new behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have the build configuration option DEFAULT_MAN_FORMAT to choose a
format different from man pages to be used by 'git help' when no format
is requested explicitly. Since 65db0443 (Set the default help format to
html for msys builds, 2013-06-04) we use html on Windows by default.
There is one test in t3200-branch.sh that invokes a help page. The
intent of the redirections applied to the command invocation is to avoid
that the man page viewer interferes with the automated test. But when
the default format is not "man", this does not have the intended effect,
and the HTML manual page is opened during the test run. Request "man"
format explicitly to keep the test silent.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/valgrind-test-fix:
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Revert "test-lib: support running tests under valgrind in parallel"
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris' tr (both /usr/bin/ and /usr/xpg4/bin) uses the System V
semantics for tr whereby string1's length is truncated to the length
of string2 if string2 is shorter. The BSD semantics, as used by GNU tr
see string2 padded to the length of string1 using the final character
in string2. POSIX explicitly doesn't specify the correct behavior
here, making both equally valid.
This difference means that Solaris' native tr implementations produce
different results for tr ":\t\n" "\0" than GNU tr. This breaks a few
tests in t0008-ignores.sh.
Possible fixes for this are to make string2 be "\0\0\0" or "[\0*]".
Instead, use perl to perform these transliterations which means we
don't need to worry about the difference at all. Since we're replacing
tr with perl, we also use perl to replace the sed invocations used to
transform the files.
Replace four identical transforms with a function named
broken_c_unquote. Replace the other two identical transforms with a
fuction named broken_c_unquote_verbose.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you ask for-each-ref to print each ref and its object,
like:
git for-each-ref --format='%(objectname) %(refname)'
this should involve little more work than looking at the ref
files (and packed-refs) themselves. However, for-each-ref
will actually load each object from disk just to print its
sha1. For most repositories, this isn't a big deal, but it
can be noticeable if you have a large number of refs to
print. Here are best-of-five timings for the command above
on a repo with ~10K refs:
[before]
real 0m0.112s
user 0m0.092s
sys 0m0.016s
[after]
real 0m0.014s
user 0m0.012s
sys 0m0.000s
This patch checks for %(objectname) and %(objectname:short)
before we actually parse the object (and the rest of the
code is smart enough to avoid parsing if we have filled all
of our placeholders).
Note that we can't simply move the objectname parsing code
into the early loop. If the "deref" form %(*objectname) is
used, then we do need to parse the object in order to peel
the tag. So instead of moving the code, we factor it out
into a separate function that can be called for both cases.
While we're at it, we add some basic tests for the
dereferenced placeholders, which were not tested at all
before. This helps ensure we didn't regress that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git pull --rebase" command computes the fork point of the
branch being rebased using the reflog entries of the "base" branch
(typically a remote-tracking branch) the branch's work was based on,
in order to cope with the case in which the "base" branch has been
rewound and rebuilt. For example, if the history looked like this:
o---B1
/
---o---o---B2--o---o---o---Base
\
B3
\
Derived
where the current tip of the "base" branch is at Base, but earlier
fetch observed that its tip used to be B3 and then B2 and then B1
before getting to the current commit, and the branch being rebased
on top of the latest "base" is based on commit B3, it tries to find
B3 by going through the output of "git rev-list --reflog base" (i.e.
Base, B1, B2, B3) until it finds a commit that is an ancestor of the
current tip "Derived".
Internally, we have get_merge_bases_many() that can compute this
with one-go. We would want a merge-base between Derived and a
fictitious merge commit that would result by merging all the
historical tips of "base". When such a commit exist, we should get
a single result, which exactly match one of the reflog entries of
"base".
Teach "git merge-base" a new mode, "--fork-point", to compute
exactly that.
Helped-by: Martin von Zweigbergk <martinvonz@gmail.com>
Helped-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the last commit, we can use "perl" instead of
"$PERL_PATH" when running tests, as the former is now a
function which uses the latter. As the shorter "perl" is
easier on the eyes, let's switch to using it everywhere.
This is not quite a mechanical s/$PERL_PATH/perl/
replacement, though. There are some places where we invoke
perl from a script we generate on the fly, and those scripts
do not have access to our internal shell functions. The
result can be double-checked by running:
ln -s /bin/false bin-wrappers/perl
make test
which continues to pass even after this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we assumed that calling a bare "perl" in
the test scripts was OK, because we would find the perl from
the user's PATH, and we were only asking that perl to do
basic operations that work even on old versions of perl.
Later, we found that some systems really prefer to use
$PERL_PATH even for these basic cases, because the system
perl misbehaves in some way (e.g., by handling line endings
differently). We then switched "perl" invocations to
"$PERL_PATH" to respect the user's choice.
Having to use "$PERL_PATH" is ugly and cumbersome, though.
Instead, let's provide a perl() shell function that tests
can use, which will transparently do the right thing.
Unfortunately, test writers still have to use $PERL_PATH in
certain situations, so we still need to keep the advice in
the README.
Note that this may fix test failures in t5004, t5503, t6002,
t6003, t6300, t8001, and t8002, depending on your system's
perl setup. All of these can be detected by running:
ln -s /bin/false bin-wrappers/perl
make test
which fails before this patch, and passes after.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git build system supports a NO_PERL switch to avoid installing
perl bindings or other features (like "git add --patch") that rely on
perl on runtime, but even with NO_PERL it has not been possible for a
long time to run tests without perl. Helpers such as
nul_to_q () {
"$PERL_PATH" -pe 'y/\000/Q/'
}
use perl as a better tr or sed and are regularly used in tests without
worrying to add a PERL prerequisite.
Perl is portable enough that it seems fine to keep relying on it for
this kind of thing in tests (and more readable than the alternative of
trying to find POSIXy equivalents). Update the test documentation to
clarify this.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the fall-back parsing of commit objects with broken author or
committer lines more robust to pick up the timestamps.
* jk/split-broken-ident:
split_ident: parse timestamp from end of line
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
* jx/relative-path-regression-fix:
Use simpler relative_path when set_git_dir
relative_path should honor dos-drive-prefix
test: use unambigous leading path (/foo) for MSYS
"git clone" gave some progress messages to the standard output, not to
the standard error, and did not allow suppressing them with the
"--no-progress" option.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
"format-patch --from=<whom>" forgot to omit unnecessary in-body from
line, i.e. when <whom> is the same as the real author.
* jk/format-patch-from:
format-patch: print in-body "From" only when needed
"git shortlog" used to choke and die when there is a malformed commit
(e.g. missing authors); it now simply ignore such a commit and keeps
going.
* jk/shortlog-tolerate-broken-commit:
shortlog: ignore commits with missing authors
Normally parse_pathspec() is used on command line arguments where it
can do fancy thing like parsing magic on each argument or adding magic
for all pathspecs based on --*-pathspecs options.
There's another use of parse_pathspec(), where pathspec is needed, but
the input is known to be pure paths. In this case we usually don't
want --*-pathspecs to interfere. And we definitely do not want to
parse magic in these paths, regardless of --literal-pathspecs.
Add new flag PATHSPEC_LITERAL_PATH for this purpose. When it's set,
--*-pathspecs are ignored, no magic is parsed. And if the caller
allows PATHSPEC_LITERAL (i.e. the next calls can take literal magic),
then PATHSPEC_LITERAL will be set.
This fixes cases where git chokes when GIT_*_PATHSPECS are set because
parse_pathspec() indicates it won't take any magic. But
GIT_*_PATHSPECS add them anyway. These are
export GIT_LITERAL_PATHSPECS=1
git blame -- something
git log --follow something
git log --merge
"git ls-files --with-tree=path" (aka parse_pathspec() in
overlay_tree_on_cache()) is safe because the input is empty, and
producing one pathspec due to PATHSPEC_PREFER_CWD does not take any
magic into account.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris' sed was choking on the i\ commands used in
t4015-diff-whitespace as it couldn't parse the program properly.
Modify two uses of sed that worked in GNU sed but not Solaris'
(/usr/bin or /usr/xpg4/bin) to an equivalent form that is handled
properly by both.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Point test writers to the test_expect_* functions properly.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a number of tests, output that was produced by a shell script is
compared to expected output using test_cmp. Unfortunately, the MSYS bash--
when invoked via git, such as in hooks--converts LF to CRLF on output
(as produced by echo and printf), which leads to many false positives.
Implements a diff tool that undoes the converted CRLF. To avoid that
sub-processes are spawned (which is very slow on Windows), the tool is
implemented as a shell function. Diff is invoked as usual only when a
difference is detected by the shell code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may set test_cmp to a comparison tool of their liking. The intent is
that the tool performs comparison of line-oriented texts. However, t5300
uses it also to compare binary data. Change those tests to use 'cmp'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add--interactive --patch mode adjusts the UI based on
whether we are pulling changes from HEAD or elsewhere (in
the former case it asks to unstage the reverse hunk, rather
than apply the forward hunk).
Commit 166ec2e taught reset to work on an unborn branch, but
in doing so, switched to always providing add--interactive
with the sha1 rather than the symbolic name. This meant we
always used the "apply" interface, even for "git reset -p
HEAD".
We can fix this by passing the symbolic name to
add--interactive. Since it understands unborn branches
these days, we do not even have to cover this special case
ourselves; we can simply pass HEAD.
The tests in t7105 now check that the right interface is
used in each circumstance (and notice the regression from
166ec2e we are fixing). The test in t7106 checks that we
get this right for the unborn case, too (not a regression,
since it didn't work at all before, but a nice improvement).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --prune --tags" is currently interpreted as follows:
* "--tags" is equivalent to specifying a refspec
"refs/tags/*:refs/tags/*", and supersedes any default refspecs
configured via remote.$REMOTE.fetch.
* "--prune" only operates on the refspecs being fetched.
Therefore, "git fetch --prune --tags" prunes tags in refs/tags/* but
does not fetch or prune other references. The fact that this command
does not prune references outside of refs/tags/* was previously
untested. So add a test that verifies the status quo.
However, the status quo is surprising, so it will be changed later in
this patch series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" was being used with contrived refspecs to create tags and
remote-tracking branches in test repositories in preparation for the
actual tests. This is obscure and also makes one wonder whether this
is indeed just preparation or whether some side-effect of "git fetch"
is being tested.
So use the more straightforward commands "git tag" / "git update-ref"
when preparing branches in test repositories.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an apparent copy-paste error: A few lines earlier, a tag
"refs/tags/sometag" is created. Check for the (non-)existence of that
tag, not "somebranch", which is otherwise never mentioned in the
script.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
"git branch --track" had a minor regression in v1.8.3.2 and later
that made it impossible to base your local work on anything but a
local branch of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
When there is no sufficient overlap between old and new history
during a "git fetch" into a shallow repository, objects that the
sending side knows the receiving end has were unnecessarily sent.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
"git cherry-pick" without further options would segfault.
Could use a follow-up to handle '-' after argv[1] better.
* hu/cherry-pick-previous-branch:
cherry-pick: handle "-" after parsing options
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
Now that ad0e623 (test-lib: support running tests under valgrind in
parallel, 2013-06-23) has been reverted, this support code has no
users any more. Revert it, too.
This reverts commit e939e15d24.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ad0e623332.
--valgrind-parallel was broken from the start: during review I made
the whole valgrind setup code conditional on not being a
--valgrind-parallel worker child. But even the children crucially
need $GIT_VALGRIND to be set; it should therefore have been set
outside the conditional.
The fix would be a two-liner, but since the introduction of the
feature, almost four months have passed without anyone noticing that
it is broken. So this feature is not worth the about hundred lines of
test-lib.sh complexity. Revert it.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
git-daemon now uses the symref capability to send the correct HEAD
reference, so the test for that in t5570 now passes.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
The previous code was detecting the presence of "--" by looking only at
argument 1. As a result, "git checkout foo bar --" was interpreted as an
ambiguous file/revision list, and errored out with:
error: pathspec 'foo' did not match any file(s) known to git.
error: pathspec 'bar' did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
This patch fixes it by walking through the argument list to find the
"--", and now complains about the number of references given.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--" notation disambiguates files and branches, but as a side-effect
of the previous implementation, also disabled the branch auto-creation
when $branch does not exist.
A possible scenario is then:
git checkout $branch
=> fails if $branch is both a ref and a file, and suggests --
git checkout $branch --
=> refuses to create the $branch
This patch allows the second form to create $branch, and since the -- is
provided, it does not look for file named $branch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file isn't really harmful, but isn't useful either, and can create
minor annoyance for the user:
* It's confusing, as the presence of a *.pid file often implies that a
process is currently running. A user running "ls .git/" and finding
this file may incorrectly guess that a "git gc" is currently running.
* Leaving this file means that a "git gc" in an already gc-ed repo is
no-longer a no-op. A user running "git gc" in a set of repositories,
and then synchronizing this set (e.g. rsync -av, unison, ...) will see
all the gc.pid files as changed, which creates useless noise.
This patch unlinks the file after the garbage collection is done, so that
gc.pid is actually present only during execution.
Future versions of Git may want to use the information left in the gc.pid
file (e.g. for policies like "don't attempt to run a gc if one has
already been ran less than X hours ago"). If so, this patch can safely be
reverted. For now, let's not bother the users.
Explained-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch --from=<whom>" forgot to omit unnecessary in-body
from line, i.e. when <whom> is the same as the real author.
* jk/format-patch-from:
format-patch: print in-body "From" only when needed
