These just checked that we could clone a repository when the
username and password were given in the URL; we should also
check that git will prompt when no or partial credentials
are given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
* jk/clone-cmdline-config:
clone: accept config options on the command line
config: make git_config_parse_parameter a public function
remote: use new OPT_STRING_LIST
parse-options: add OPT_STRING_LIST helper
* jk/maint-config-param:
config: use strbuf_split_str instead of a temporary strbuf
strbuf: allow strbuf_split to work on non-strbufs
config: avoid segfault when parsing command-line config
config: die on error in command-line config
fix "git -c" parsing of values with equals signs
strbuf_split: add a max parameter
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
Conflicts:
git-submodule.sh
* fg/submodule-keep-updating:
git-submodule.sh: clarify the "should we die now" logic
submodule update: continue when a checkout fails
git-sh-setup: add die_with_status
Conflicts:
git-submodule.sh
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. This can cause a problem
if the command requires reading from stdin or if it changes its behavior
based on whether stdin is a tty or not (e.g. git shortlog). Demonstrate
this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming-filter:
t0021: test application of both crlf and ident
t0021-conversion.sh: fix NoTerminatingSymbolAtEOF test
streaming: filter cascading
streaming filter: ident filter
Add LF-to-CRLF streaming conversion
stream filter: add "no more input" to the filters
Add streaming filter API
convert.h: move declarations for conversion from cache.h
* da/git-prefix-everywhere:
t/t7503-pre-commit-hook.sh: Add GIT_PREFIX tests
git-mergetool--lib: Make vimdiff retain the current directory
git: Remove handling for GIT_PREFIX
setup: Provide GIT_PREFIX to built-ins
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
If a svn:mergeinfo range starts at a commit that was converted as a
git root commit (e.g., r1 or a branch that was created out of thin
air), then there is an error when git-svn tries to run
git rev-list "$bottom_commit^..$top_commit"
because $bottom_commit (the git commit corresponding to r1) has no
parent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Earlier 33f072f (submodule sync: Update "submodule.<name>.url" for empty
directories, 2010-10-08) attempted to fix a bug where "git submodule sync"
command does not update the URL if the current superproject does not have
a checkout of the submodule.
However, it did so by unconditionally registering submodule.$name.url to
every submodule in the project, even the ones that the user has never
showed interest in at all by running 'git submodule init' command. This
caused subsequent 'git submodule update' to start cloning/updating submodules
that are not interesting to the user at all.
Update the code so that the URL is updated from the .gitmodules file only
for submodules that already have submodule.$name.url entries, i.e. the
ones the user has showed interested in having a checkout.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clone does all of init, "remote add", fetch, and checkout
without giving the user a chance to intervene and set any
configuration. This patch allows you to set config options
in the newly created repository after the clone, but before
we do any other operations.
In many cases, this is a minor convenience over something
like:
git clone git://...
git config core.whatever true
But in some cases, it can bring extra efficiency by changing
how the fetch or checkout work. For example, setting
line-ending config before the checkout avoids having to
re-checkout all of the contents with the correct line
endings.
It also provides a mechanism for passing information to remote
helpers during a clone; the helpers may read the git config
to influence how they operate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just adds repeated invocations of an option to a list
of strings. Using the "--no-<var>" form will reset the list
to empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check for an empty key on the left side of an
equals, but we would segfault if there was no content at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling for git_config is somewhat confusing. We
collect errors from running git_config_from_file on the
various config files and carefully pass them back up. But
the two odd things are:
1. We actually die on most errors in git_config_from_file.
In fact, the only error we actually pass back up is if
fopen() fails on the file.
2. Most callers of git_config do not check the error
return at all, but will continue if git_config reports
an error.
When the code for "git -c core.foo=bar" was added, it
dutifully passed errors up the call stack, only for them to
be eventually ignored. This makes it inconsistent with the
file-parsing code, which will die when it sees malformed
config. And it's somewhat unsafe, because it means an error
in parsing a typo like:
git -c clean.requireforce=ture clean
will continue the command, ignoring the config the user
tried to give.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do something like:
git -c core.foo="value with = in it" ...
we would split your option on "=" into three fields and
throw away the third one. With this patch we correctly take
everything after the first "=" as the value (keys cannot
have an equals sign in them, so the parsing is unambiguous).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tar filters may be very expensive to run, so sites do
not want to expose them via upload-archive. This patch lets
users configure tar.<filter>.remote to turn them off.
By default, gzip filters are left on, as they are about as
expensive as creating zip archives.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works exactly as if the user had configured it via:
[tar "tgz"]
command = gzip -cn
[tar "tar.gz"]
command = gzip -cn
but since it is so common, it's convenient to have it
builtin without the user needing to do anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's common to pipe the tar output produce by "git archive"
through gzip or some other compressor. Locally, this can
easily be done by using a shell pipe. When requesting a
remote archive, though, it cannot be done through the
upload-archive interface.
This patch allows configurable tar filters, so that one
could define a "tar.gz" format that automatically pipes tar
output through gzip.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber noticed that under /bin/dash this test failed
(as is expected -- \n in the string can be interpreted by the
command), while it passed with bash. We probably could work it
around by using backquote in front of it, but it is safer and
more readable to avoid "echo" altogether in a case like this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on-demand mode was active examining the new commits just fetched in
the superproject (to check if they record commits for submodules which are
not downloaded yet) wasn't done recursively. Because of that fetch did not
recursively fetch submodules living in subdirectories even when it should
have.
Fix that by adding the RECURSIVE flag to the diff_options used to check
the new commits and avoid future regressions in this area by moving a
submodule in t5526 into a subdirectory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, "git tag -l foo* bar*" would silently ignore the
second argument, showing only refs starting with "foo". It's
not just unfriendly not to take a second pattern; we
actually generated subtly wrong results (from the user's
perspective) because some of the requested tags were
omitted.
This patch allows an arbitrary number of patterns on the
command line; if any of them matches, the ref is shown.
While we're tweaking the documentation, let's also make it
clear that the pattern is fnmatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus noticed that we go ahead testing gitweb and fail miserably on a
box with Perl but not perl-CGI library. We already have a code to detect
lack of Perl and refrain from testing gitweb in t/gitweb-lib.sh (by the
way, shouldn't it be called t/lib-gitweb.sh?), so let's extend it
to cover this case as well.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" stops at the first error and gives control
back to the user. Only after the user fixes the problematic
submodule and runs "git submodule update" again, the second error
is found. And the user needs to repeat until all the problems are
found and fixed one by one. This is tedious.
Instead, the command can remember which submodules it had trouble with,
continue updating the ones it can, and report which ones had errors at
the end. The user can run "git submodule update", find all the ones that
need minor fixing (e.g. working tree was dirty) to fix them in a single
pass. Then another "git submodule update" can be run to update all.
Note that the problematic submodules are skipped only when they are to
be integrated with a safer value of submodule.<name>.update option,
namely "checkout". Fixing a failure in a submodule that uses "rebase" or
"merge" may need an involved conflict resolution by the user, and
leaving too many submodules in states that need resolution would not
reduce the mental burden on the user.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same test and prerequisite as introduced in similar
fix in 650af7ae8b.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
