In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that `ort` is the default merge strategy now rather than
`recursive`, including moving `ort` to the front of the list of merge
strategies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --advertise-refs documentation in git-upload-pack added in
9812f2136b (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in
e52449b672 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 58634dbff8 ("rebase: Allow merge strategies to be used when
rebasing", 2006-06-21) added the --merge option to git-rebase so that
renames could be detected (at least when using the `recursive` merge
backend). However, git-am -3 gained that same ability in commit
579c9bb198 ("Use merge-recursive in git-am -3.", 2006-12-28). As such,
the comment about being able to detect renames is not particularly
noteworthy. Remove it.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have diff-algorithm that explains why there are special diff
algorithms, so we do not need to re-explain patience. patience exists
as its own toplevel option for historical reasons, but there's no reason
to give it special preference or document it again and suggest it's more
important than other diff algorithms, so just refer to it as a
deprecated shorthand for `diff-algorithm=patience`.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stating that the recursive strategy "currently cannot make use of
detected copies" implies that this is a technical shortcoming of the
current algorithm. I disagree with that. I don't see how copies could
possibly be used in a sane fashion in a merge algorithm -- would we
propagate changes in one file on one side of history to each copy of
that file when merging? That makes no sense to me. I cannot think of
anything else that would make sense either. Change the wording to
simply state that we ignore any copies.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is probably helpful to cover the default merge strategy first, so
move the text for the resolve strategy to later in the document.
Further, the wording for "resolve" claimed that it was "considered
generally safe and fast", which might imply in some readers minds that
the same is not true of other strategies. Rather than adding this text
to all the strategies, just remove it from this one.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the documentation referred to the "`recursive` strategy"
using the phrase "`git merge-recursive`", suggesting that it was forking
subprocesses to call a toplevel builtin. Perhaps that was relevant to
when rebase was a shell script, but it seems like a rather indirect way
to refer to the `recursive` strategy. Simplify the references.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0c4fd732f0 ("Move computation of dir_rename_count from
merge-ort to diffcore-rename", 2021-02-27), much of the logic for
computing directory renames moved into diffcore-rename.
directory-rename-detection.txt had claims that all of that logic was
found in merge-recursive. Update the documentation.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --rebase-merges was first introduced, it only worked with the
`recursive` strategy. Some time later, it gained support for merges
using the `octopus` strategy. The limitation of only supporting these
two strategies was documented in 25cff9f109 ("rebase -i --rebase-merges:
add a section to the man page", 2018-04-25) and lifted in e145d99347
("rebase -r: support merge strategies other than `recursive`",
2019-07-31). However, when the limitation was lifted, the documentation
was not updated. Update it now.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
Reorganize and update the SubmitingPatches document.
* ab/update-submitting-patches:
SubmittingPatches: replace discussion of Travis with GitHub Actions
SubmittingPatches: move discussion of Signed-off-by above "send"
In the preceding commits we introduced new documentation that talks
about "[commit|object] prerequsite(s)", but also faithfully moved
around existing documentation that talks about the "basis".
Let's change both that moved-around documentation and other existing
documentation in the file to consistently use "[commit|object]"
prerequisite(s)" instead of talking about "basis". The mention of
"basis" isn't wrong, but readers will be helped by us using only one
term throughout the document for this concept.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elaborate on the restriction that you cannot provide a revision that
doesn't resolve to a reference in the "SPECIFYING REFERENCES" section
with examples.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split out the discussion bout "object prerequisites" into its own
section, and add some more examples of the common cases.
See 2e0afafebd (Add git-bundle: move objects and references by
archive, 2007-02-22) for the introduction of the documentation being
changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the "DESCRIPTION" section for "git bundle" to start by talking
about what bundles are in general terms, rather than diving directly
into one example of what they might be used for.
This changes documentation that's been substantially the same ever
since the command was added in 2e0afafebd (Add git-bundle: move
objects and references by archive, 2007-02-22).
I've split up the DESCRIPTION into that section and a "BUNDLE FORMAT"
section, it briefly discusses the format, but then links to the
technical/bundle-format.txt documentation.
The "the user must specify a basis" part of this is discussed below in
"SPECIFYING REFERENCES", and will be further elaborated on in a
subsequent commit. So I'm removing that part and letting the mention
of "revision exclusions" suffice.
There was a discussion about whether to say anything at all about
"thin packs" here[1]. I think it's good to mention it for the curious
reader willing to read the technical docs, but let's explicitly say
that there's no "thick pack", and that the difference shouldn't
matter.
1. http://lore.kernel.org/git/xmqqk0mbt5rj.fsf@gitster.g
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation around GIT_CONFIG has been updated.
* jk/config-env-doc:
doc/git-config: simplify "override" advice for FILES section
doc/git-config: clarify GIT_CONFIG environment variable
doc/git-config: explain --file instead of referring to GIT_CONFIG
Three hyphens are rendered verbatim, so "--" has to be used to produce a
dash. There is no double arrow ("<->" is rendered as "<→"), so a left
and right arrow "<-->" have to be combined for that.
So fix asciidoc output for special characters. This is similar to fixes
in commit de82095a95 (doc hash-function-transition: fix asciidoc output,
2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
A guideline for gender neutral documentation has been added.
* ds/gender-neutral-doc-guidelines:
CodingGuidelines: recommend gender-neutral description
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the perl language can handle binary data correctly,
add the function perl_quote_buf_with_len(), which can specify
the length of the data and prevent the data from being truncated
at '\0' to help `--format="%(raw)"` support `--perl`.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new formatting option `%(raw)`, which will print the raw
object data without any changes. It will help further to migrate
all cat-file formatting logic from cat-file to ref-filter.
The raw data of blob, tree objects may contain '\0', but most of
the logic in `ref-filter` depends on the output of the atom being
text (specifically, no embedded NULs in it).
E.g. `quote_formatting()` use `strbuf_addstr()` or `*._quote_buf()`
add the data to the buffer. The raw data of a tree object is
`100644 one\0...`, only the `100644 one` will be added to the buffer,
which is incorrect.
Therefore, we need to find a way to record the length of the
atom_value's member `s`. Although strbuf can already record the
string and its length, if we want to replace the type of atom_value's
member `s` with strbuf, many places in ref-filter that are filled
with dynamically allocated mermory in `v->s` are not easy to replace.
At the same time, we need to check if `v->s == NULL` in
populate_value(), and strbuf cannot easily distinguish NULL and empty
strings, but c-style "const char *" can do it. So add a new member in
`struct atom_value`: `s_size`, which can record raw object size, it
can help us add raw object data to the buffer or compare two buffers
which contain raw object data.
Note that `--format=%(raw)` cannot be used with `--python`, `--shell`,
`--tcl`, and `--perl` because if the binary raw data is passed to a
variable in such languages, these may not support arbitrary binary data
in their string variable type.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Olga Telezhnaya <olyatelezhnaya@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git merge --abort' and 'git merge --quit' both
mention the special ref 'MERGE_AUTOSTASH', but this ref is not formally
defined anywhere. Mention it in the description of the '--autostash'
option for 'git merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
Replace the discussion of Travis CI added in
0e5d028a7a (Documentation: add setup instructions for Travis CI,
2016-05-02) with something that covers the GitHub Actions added in
889cacb689 (ci: configure GitHub Actions for CI/PR, 2020-04-11).
The setup is trivial compared to using Travis, and it even works on
Windows (that "hopefully soon" comment was probably out-of-date on
Travis as well).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the section discussing the addition of a SOB trailer above the
section that discusses generating the patch itself. This makes sense
as we don't want someone to go through the process of "git
format-patch", only to realize late that they should have used "git
commit -s" or equivalent.
This is a move-only change, no lines here are being altered, only
moved around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes merge-options.txt, which is written assuming
merges will happen. git-pull has allowed rebases for many years; update
the documentation to reflect that.
While at it, pass any `--signoff` flag through to the rebase backend too
so that we don't have to document it as merge-specific. Rebase has
supported the --signoff flag for years now as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase=false" means we merge their history into ours, but
it has been described the other way around.
Cc: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: updated the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc for 'submodule.recurse' starts with "Specifies if commands
recurse into submodles by default". This is not exactly true of all
commands that have a '--recurse-submodules' option. For example, 'git
pull --recurse-submodules' does not run 'git pull' in each submodule,
but rather runs 'git submodule update --recursive' so that the submodule
working trees after the pull matches the commits recorded in the
superproject.
Clarify that by just saying that it enables '--recurse-submodules'.
Note that the way this setting interacts with 'fetch.recurseSubmodules'
and 'push.recurseSubmodules', which can have other values than true or
false, is already documented since 4da9e99e6e (doc: be more precise on
(fetch|push).recurseSubmodules, 2020-04-06).
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the FILES section, we indicate that you can override the
regular lookup rules with --global, etc. But:
- we're missing the --local option
- we point to GIT_CONFIG instead of --file, but the latter has much
better documentation
- we're vague about how the overrides work; the actual option
descriptions are much better here
So let's just mention the names and point people back to the OPTIONS
section. We could perhaps even delete this paragraph entirely, but the
presence of the names may give people reading FILES a clue about where
to look for more information.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scope and utility of the GIT_CONFIG variable was drastically reduced
by dc87183189 (Only use GIT_CONFIG in "git config", not other programs,
2008-06-30). But the documentation in git-config(1) predates that, which
makes it rather misleading.
These days it is really just another way to say "--file". So let's say
that, and explicitly make it clear that it does not impact other Git
commands (like GIT_CONFIG_SYSTEM, etc, would).
I also bumped it to the bottom of the list of variables, and warned
people off of using it. We don't have any plans for deprecation at this
point, but there's little point in encouraging people to use it by
putting it at the top of the list.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation for the --file option only refers to GIT_CONFIG. This
redirection to an environment variable is confusing, but doubly so
because the description of GIT_CONFIG is out of date.
Let's describe --file from scratch, detailing both the reading and
writing behavior as we do for other similar options like --system, etc.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
Technical writing seeks to convey information with minimal
friction. One way that a reader can experience friction is if they
encounter a description of "a user" that is later simplified using a
gendered pronoun. If the reader does not consider that pronoun to
apply to them, then they can experience cognitive dissonance that
removes focus from the information.
Give some basic tips to guide us avoid unnecessary uses of gendered
description.
Using a gendered pronoun is appropriate when referring to a specific
person.
There are acceptable existing uses of gendered pronouns within the
Git codebase, such as:
* References to real people (e.g. Linus Torvalds, "the Git maintainer").
Do not misgender real people. If there is any doubt to the gender of a
person, then avoid using pronouns.
* References to fictional people with clear genders (e.g. Alice and
Bob).
* Sample text used in test cases (e.g t3702, t6432).
* The official text of the GPL license contains uses of "he or she",
but using singular "they" (or modifying the text in some other
way) is not within the scope of the Git project.
* Literal email messages in Documentation/howto/ should not be edited
for grammatical concerns such as this, unless we update the entire
document to fit the standard documentation format. If such an effort is
taken on, then the authorship would change and no longer refer to the
exact mail message.
* External projects consumed in contrib/ should not deviate solely for
style reasons. Recommended edits should be contributed to those
projects directly.
Other cases within the Git project were cleaned up by the previous
changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were last bumped in commit 92c57e5c1d (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 89973554b5 (diffcore-rename: make diff-tree -l0 mean
-l<large>, 2017-11-29), -l0 was given a special magical "large" value,
but one which was not large enough for some uses (as can be seen from
commit 9f7e4bfa3b (diff: remove silent clamp of renameLimit,
2017-11-13). Make 0 (or a negative value) be treated as unlimited
instead and update the documentation to mention this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the docs implied that rename/copy detection is always
quadratic or that all (unpaired) files were involved in the quadratic
portion of rename/copy detection. The following two commits each
introduced an exception to this:
9027f53cb5 (Do linear-time/space rename logic for exact renames,
2007-10-25)
bd24aa2f97 (diffcore-rename: guide inexact rename detection based
on basenames, 2021-02-14)
(As a side note, for copy detection, the basename guided inexact rename
detection is turned off and the exact renames will only result in
sources (without the dests) being removed from the set of files used in
quadratic detection. So, for copy detection, the documentation was
closer to correct.)
Avoid implying that all files involved in rename/copy detection are
subject to the full quadratic algorithm. While at it, also note the
default values for all these settings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation reads as if .gitignore files will be parsed in
every parent directory, and not until they reach a repository boundary.
This clarifies the current behaviour.
As well, this corrects 'toplevel' to 'top-level', matching usage for
'top-level domain'.
Signed-off-by: Andrew Berry <andrew@furrypaws.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the --negotiate-only option added in
9c1e657a8f (fetch: teach independent negotiation (no packfile),
2021-05-04), only documentation for the related push.negotiation
option added in the following commit in 477673d6f3 (send-pack:
support push negotiation, 2021-05-04).
Let's document it, and update the cross-linking I'd added between
--negotiation-tip=* and 'fetch.negotiationAlgorithm' in
526608284a (fetch doc: cross-link two new negotiation options,
2018-08-01).
I think it would be better to say "in common with the remote" here
than "...the server", but the documentation for --negotiation-tip=*
above this talks about "the server", so let's continue doing that in
this related option. See 3390e42adb (fetch-pack: support negotiation
tip whitelist, 2018-07-02) for that documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typofix (chose -> choose) in the documentation of the patch option
under the commit command.
Signed-off-by: Beshr Kayali <me@beshr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen in files "Documentation/blame-options.txt" and
"builtin/blame.c", the name of this configuration option is
"blame.markUnblamableLines".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using gendered pronouns for an anonymous person applies a gender where
none is known and further excludes readers who do not use gendered
pronouns. Avoid such examples in the documentation by using "they" or
passive voice to avoid the need for a pronoun.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "fast-forward" in the glossary has been updated.
* ry/clarify-fast-forward-in-glossary:
docs: improve fast-forward in glossary content
Many of the regulars on #git-devel are now on Libera Chat, to the extent
that the community page now lists it as the IRC Channel[1]. This will
help new contributors find the right place, if they choose to ask
questions on `#git-devel`.
Relevant discussion on the IRC transition:
https://lore.kernel.org/git/CAJoAoZ=e62sceNpcR5L5zjsj177uczTnXjcAg+BbOoOkeH8vXQ@mail.gmail.com/
[1] https://git-scm.com/community
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is almost never a good idea, as the resulting repository is
larger and slower (see the new explanations in the docs).
I outlined the potential problems. We could go further and make the
option harder to find (or at least, make the command-line option
descriptions a much more terse "you probably don't want this; see
pack.packsizeLimit for details"). But this seems like a minimal change
that may prevent people from thinking it's more useful than it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a01f7f2ba0 (merge: enable defaulttoupstream by default,
2014-04-20) forgot to mention the new default in the configuration
documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There're two different default options for log --decorate:
* Should `--decorate` be given without any arguments, it's default to
`short`
* Should neither `--decorate` nor `--no-decorate` be given, it's default
to the `log.decorate` or `auto`.
We documented the former, but not the latter.
Let's document them, too.
Reported-by: Andy AO <zen96285@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 87db61a (trace2: write discard message to sentinel files,
2019-10-04), we added a new "too_many_files" event for when trace2
logging would create too many files in an output directory.
Unfortunately, the api-trace2 doc described a "discard" event instead.
Fix the doc to use the correct event name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-repack doc clearly states that it *does* operate on promisor
packfiles (in a separate partition), with "-a" specified. Presumably
the statements here are outdated, as they feature from the first doc
in 2017 (and the repack support was added in 2018)
Signed-off-by: Tao Klerks <tao@klerks.biz>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the code has been simplified and it's clear what it's
actually doing, update the documentation to reflect that.
Namely; the simple mode only barfs when working on a centralized
workflow, and there's no configured upstream branch with the same name.
Cc: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121a (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c6618 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e2 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e2 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the 'uploadpack.blobPackfileUri' description in packfile-uri.txt
and the correct format also can be seen in t5702.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
