This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier implementation of --dry-run didn't duplicate the use of color
"git status -v" set up for diff output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a cleartext password, the CVS pserver expects a scrambled one
in the authentication request. With this patch it is possible to import
CVS repositories only accessible via pserver and user/password.
Signed-off-by: Dirk Hoerner <dirker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce size of git-favicon.png using a combination of optipng and
pngout. From 164 bytes to 115 bytes (30% reduction). Also reduce
git-logo.png's size by one byte using advcomp.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change makes sure a stash (given or default) exists before
checking if the working tree is dirty.
If the default stash is requested, the old message was scary and
included a 'fatal' error from rev-parse:
fatal: Needed a single revision
: no valid stashed state found
It is replaced with a friendlier 'Nothing to apply' error, similar to
'git stash branch'.
If a specific stash is specified, the 'Needed a single revision' errors
from rev-parse are suppressed.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some compilers produce errors when arithmetic is attempted on pointers to
void. We want computations done on byte addresses, so cast them to char *
to work them around.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/gitweb-blame' (early part):
gitweb: Use light/dark for class names also in 'blame' view
gitweb: Add author initials in 'blame' view, a la "git gui blame"
gitweb: Mark commits with no "previous" in 'blame' view
gitweb: Use "previous" header of git-blame -p in 'blame' view
gitweb: Mark boundary commits in 'blame' view
gitweb: Make .error style generic
This moves the call setup for 'git add--interactive' to a separate
function, as other users will call it without running
validate_pathspec() first.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for {reset,commit,stash} -p will frequently have to set both
worktree and index states to known values, and verify that the outcome
(again both worktree and index) are what was expected.
Add a small helper library that lets us do these tasks more easily.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes some aspects of the 'git add -p' loop configurable (within
the code), so that we can later reuse git-add--interactive for other
similar tools.
Most fields are fairly straightforward, but APPLY gets a subroutine
(instead of just a string a la 'apply --cached') so that we can handle
'checkout -p', which will need to atomically apply the patch twice
(index and worktree).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-objects is run under the --strict option, objects that have
pointers to other objects are verified for the reachability at the end, by
calling check_object() on each of them, and letting check_object to walk
the reachable objects from them using fsck_walk() recursively.
The function however misunderstands the semantics of fsck_walk() function
when it makes a call to it, setting itself as the callback. fsck_walk()
expects the callback function to return a non-zero value to signal an
error (negative value causes an immediate abort, positive value is still
an error but allows further checks on sibling objects) and return zero to
signal a success. The function however returned 1 on some non error
cases, and to cover up this mistake, complained only when fsck_walk() did
not detect any error.
To fix this double-bug, make the function return zero on all success
cases, and also check for non-zero return from fsck_walk() for an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to X86, PowerPC and S390 are capable of unaligned memory
accesses.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accepted either SHA1s or heads/tags that have been read. This
meant the user could not, e.g., enter HEAD to go back to the current
commit.
This adds code to call out to git rev-parse --verify if all other
methods of interpreting the string the user entered fail.
(git-rev-parse alone is not enough as we really want a single
revision.)
The error paths change slighly, because we now know from the rev-parse
invocation whether the expression was valid at all. The previous
"unknown" path is now only triggered if the revision does exist, but
is not in the current view display.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
ee66e08 (gitk: Make updates go faster, 2008-05-09) implemented an
optimized mode where gitk parses the arguments with rev-parse, and
manually reads history in chunks. As mentioned in the commit message,
symmetric differences are a problem there:
One wrinkle is that we have to turn symmetric diff arguments (of the
form a...b) back into symmetric diff form so that --left-right still
works, as git rev parse turns a...b into a b ^merge_base(a,b).
However, git-rev-parse returns a...b in the swapped order
b a ^merge_base(a,b)
This has been the case since at least 1f8115b (the state of master at
the time of the abovementioned ee66e08; Merge branch 'maint',
2008-05-08). So gitk flipped the sides of symmetric differences
whenever it was in optimized mode.
Fix this by swapping the sides of the reconstruction code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In repositories with lots of remotes, looking at the history in gitk
can be borderline insane with all the red labels for remote refs.
Introduce a new option in the preferences that makes gitk ignore
remote refs entirely, so they don't take up space in the display.
Wished-for-by: Thell Fowler <tbfowler4@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 39ee47e (Clean up file encoding code and add enable/disable option,
2008-10-15) rewrote the attribute lookup functions gitattr and
cache_gitattr, but in the process hard-coded the attribute name "encoding"
instead of using the functions' parameters. This fixes it.
This is not a serious regression because currently all callers look only
for "encoding".
Further note that this fix assumes that future callers will not pass an
attribute name that contains regex special characters.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two structures are of the same type, but we'd better be consistent.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed on architectures with poor or non-existent unaligned memory
support and/or no fast byte swap instruction (such as ARM) by using byte
accesses to memory and shifting the result together.
This also makes the code portable, therefore the byte access methods are
the defaults. Any architecture that properly supports unaligned word
accesses in hardware simply has to enable the alternative methods.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to make it easier for them to be selected individually depending
on the architecture instead of the other way around i.e. having each
architecture select a list of hacks up front. That makes for clearer
documentation as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code around so specific architecture hacks are defined first.
Also make one line comments actually one line. No code change.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is a large number of new or modified files,
"display_all_files" takes a long time, and git-gui appears to hang.
This change limits the number of files that are displayed. This
limit can be set as gui.maxfilesdisplayed, and is 5000 by default.
A warning is shown the first time the list of files is truncated
in this GUI session. Subsequent truncations are not mentioned to
the user.
Signed-off-by: Dan Zwell <dzwell@zwell.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
