Mark the errors mktag might emit for translation. This is a plumbing
command, but the errors it emits are intended to be human-readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "mktag" command to use parse-options.h instead of its own
ad-hoc argc handling. This doesn't matter much in practice since it
doesn't support any options, but removes another special-case in our
codebase, and makes it easier to add options to it in the future.
It does marginally improve the situation for programs that want to
execute git commands in a consistent manner and e.g. always use
--end-of-options. E.g. "gitaly" does that, and has a blacklist of
built-ins that don't support --end-of-options. This is one less
special case for it and other similar programs to support.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the fsck_config() function from builtin/fsck.c to fsck.[ch]. This
allows for re-using it in other tools that expose fsck logic and want
to support its configuration variables.
A logical continuation of this change would be to use a common
function for all of {fetch,receive}.fsck.* and fsck.*. See
5d477a334a (fsck (receive-pack): allow demoting errors to warnings,
2015-06-22) and my own 1362df0d41 (fetch: implement fetch.fsck.*,
2018-07-27) for the relevant code.
However, those routines want to not parse the fsck.skipList into OIDs,
but rather pass them along with the --strict option to another
process. It would be possible to refactor that whole thing so we
support e.g. a "fetch." prefix, then just keep track of the skiplist
as a filename instead of parsing it, and learn to spew that all out
from our internal structures into something we can append to the
--strict option.
But instead I'm planning to re-use this in "mktag", which'll just
re-use these "fsck.*" variables as-is.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the validation logic in "mktag" to use fsck's fsck_tag()
instead of its own custom parser. Curiously the logic for both dates
back to the same commit[1]. Let's unify them so we're not maintaining
two sets functions to verify that a tag is OK.
The behavior of fsck_tag() and the old "mktag" code being removed here
is different in few aspects.
I think it makes sense to remove some of those checks, namely:
A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag
code disallowed values larger than 1400.
Yes there's currently no timezone with a greater offset[2], but
since we allow any number of non-offical timezones (e.g. +1234)
passing this through seems fine. Git also won't break in the
future if e.g. French Polynesia decides it needs to outdo the Line
Islands when it comes to timezone extravagance.
B. fsck allows missing author names such as "tagger <email>", mktag
wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but
not "tagger [1 space] <email>"). Now we allow all of these.
C. Like B, but "mktag" disallowed spaces in the <email> part, fsck
allows it.
In some ways fsck_tag() is stricter than "mktag" was, namely:
D. fsck disallows zero-padded dates, but mktag didn't care. So
e.g. the timestamp "0000000000 +0000" produces an error now. A
test in "t1006-cat-file.sh" relied on this, it's been changed to
use "hash-object" (without fsck) instead.
There was one check I deemed worth keeping by porting it over to
fsck_tag():
E. "mktag" did not allow any custom headers, and by extension (as an
empty commit is allowed) also forbade an extra stray trailing
newline after the headers it knew about.
Add a new check in the "ignore" category to fsck and use it. This
somewhat abuses the facility added in efaba7cc77 (fsck:
optionally ignore specific fsck issues completely, 2015-06-22).
This is somewhat of hack, but probably the least invasive change
we can make here. The fsck command will shuffle these categories
around, e.g. under --strict the "info" becomes a "warn" and "warn"
becomes "error". Existing users of fsck's (and others,
e.g. index-pack) --strict option rely on this.
So we need to put something into a category that'll be ignored by
all existing users of the API. Pretending that
fsck.extraHeaderEntry=error ("ignore" by default) was set serves
to do this for us.
1. ec4465adb3 (Add "tag" objects that can be used to sign other
objects., 2005-04-25)
2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces no functional change, but refactors the print-out of
the hash at the end to do the same thing with less code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This minor stylistic churn is usually something we'd avoid, but if we
don't do this then the file after changes in subsequent commits will
only have this minor style inconsistency, so let's change this while
we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded hint of 2^12 to 0. The default strbuf hint is
perfectly fine here, and the only reason we were hardcoding it is
because it survived migration from a pre-strbuf fixed-sized buffer.
See fd17f5b5f7 (Replace all read_fd use with strbuf_read, and get rid
of it., 2007-09-10) for that migration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple "credential-store" backends can race to lock the same
file, causing everybody else but one to fail---reattempt locking
with some timeout to reduce the rate of the failure.
* sa/credential-store-timeout:
crendential-store: use timeout when locking file
Fix formulation of an error message with two placeholders in "git
worktree add" subcommand.
* mt/worktree-error-message-fix:
worktree: fix order of arguments in error message
Fix an option name in "gc" documentation.
* ab/gc-keep-base-option:
gc: rename keep_base_pack variable for --keep-largest-pack
gc docs: change --keep-base-pack to --keep-largest-pack
The code was not prepared to deal with pack .idx file that is
larger than 4GB.
* jk/4gb-idx:
packfile: detect overflow in .idx file size checks
block-sha1: take a size_t length parameter
fsck: correctly compute checksums on idx files larger than 4GB
use size_t to store pack .idx byte offsets
compute pack .idx byte offsets using size_t
The exchange between receive-pack and proc-receive hook did not
carefully check for errors.
* jx/t5411-flake-fix:
receive-pack: use default version 0 for proc-receive
receive-pack: gently write messages to proc-receive
t5411: new helper filter_out_user_friendly_and_stable_output
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restore a space that was lost in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25).
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
`git worktree add` (without --force) errors out when given a path
that is already registered as a worktree and the path is missing on
disk. But the `cmd` and `path` strings are switched on the error
message. Let's fix that.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in an earlier change the keep_base_pack variable name is a
relic from an earlier on-list version of ae4e89e549 ("gc: add
--keep-largest-pack option", 2018-04-15) before it was renamed to
--keep-largest-pack.
Let's change the variable name to avoid that confusion, it's easier to
read the code if there's a 1=1 mapping between the variable name and
option name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d18c950a69 (pull: warn if the user didn't say whether to rebase or
to merge, 2020-03-09), a new hint was introduced to encourage users to
make a conscious decision about whether they want their pull to merge or
to rebase by configuring the `pull.rebase` setting.
This warning was clearly intended to advise users, but as pointed out in
https://lore.kernel.org/git/87ima2rdsm.fsf%40evledraar.gmail.com, it
uses `warning()` instead of `advise()`.
One consequence is that the advice is not colorized in the same manner
as other, similar messages. So let's use `advise()` instead.
Pointed-out-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compare_tasks_by_selection() is used with QSORT and gets passed pointers
to the elements of "static struct maintenance_task tasks[]". It casts
the *addresses* of these passed pointers to element pointers, though,
and thus effectively compares some unrelated values from the stack. Fix
the casts to actually compare array elements.
Detected by USan (make SANITIZE=undefined test).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
The code to see if "git stash drop" can safely remove refs/stash
has been made more carerful.
* rs/empty-reflog-check-fix:
stash: simplify reflog emptiness check
We sometimes store the offset into a pack .idx file as an "unsigned
long", but the mmap'd size of a pack .idx file can exceed 4GB. This is
sufficient on LP64 systems like Linux, but will be too small on LLP64
systems like Windows, where "unsigned long" is still only 32 bits. Let's
use size_t, which is a better type for an offset into a memory buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack and its matching .idx file are limited to 2^32 objects, because
the pack format contains a 32-bit field to store the number of objects.
Hence we use uint32_t in the code.
But the byte count of even a .idx file can be much larger than that,
because it stores at least a hash and an offset for each object. So
using SHA-1, a v2 .idx file will cross the 4GB boundary at 153,391,650
objects. This confuses load_idx(), which computes the minimum size like
this:
unsigned long min_size = 8 + 4*256 + nr*(hashsz + 4 + 4) + hashsz + hashsz;
Even though min_size will be big enough on most 64-bit platforms, the
actual arithmetic is done as a uint32_t, resulting in a truncation. We
actually exceed that min_size, but then we do:
unsigned long max_size = min_size;
if (nr)
max_size += (nr - 1)*8;
to account for the variable-sized table. That computation doesn't
overflow quite so low, but with the truncation for min_size, we end up
with a max_size that is much smaller than our actual size. So we
complain that the idx is invalid, and can't find any of its objects.
We can fix this case by casting "nr" to a size_t, which will do the
multiplication in 64-bits (assuming you're on a 64-bit platform; this
will never work on a 32-bit system since we couldn't map the whole .idx
anyway). Likewise, we don't have to worry about further additions,
because adding a smaller number to a size_t will convert the other side
to a size_t.
A few notes:
- obviously we could just declare "nr" as a size_t in the first place
(and likewise, packed_git.num_objects). But it's conceptually a
uint32_t because of the on-disk format, and we correctly treat it
that way in other contexts that don't need to compute byte offsets
(e.g., iterating over the set of objects should and generally does
use a uint32_t). Switching to size_t would make all of those other
cases look wrong.
- it could be argued that the proper type is off_t to represent the
file offset. But in practice the .idx file must fit within memory,
because we mmap the whole thing. And the rest of the code (including
the idx_size variable we're comparing against) uses size_t.
- we'll add the same cast to the max_size arithmetic line. Even though
we're adding to a larger type, which will convert our result, the
multiplication is still done as a 32-bit value and can itself
overflow. I didn't check this with my test case, since it would need
an even larger pack (~530M objects), but looking at compiler output
shows that it works this way. The standard should agree, but I
couldn't find anything explicit in 6.3.1.8 ("usual arithmetic
conversions").
The case in load_idx() was the most immediate one that I was able to
trigger. After fixing it, looking up actual objects (including the very
last one in sha1 order) works in a test repo with 153,725,110 objects.
That's because bsearch_hash() works with uint32_t entry indices, and the
actual byte access:
int cmp = hashcmp(table + mi * stride, sha1);
is done with "stride" as a size_t, causing the uint32_t "mi" to be
promoted to a size_t. This is the way most code will access the index
data.
However, I audited all of the other byte-wise accesses of
packed_git.index_data, and many of the others are suspect (they are
similar to the max_size one, where we are adding to a properly sized
offset or directly to a pointer, but the multiplication in the
sub-expression can overflow). I didn't trigger any of these in practice,
but I believe they're potential problems, and certainly adding in the
cast is not going to hurt anything here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the verison negotiation phase between "receive-pack" and
"proc-receive", "proc-receive" can send an empty flush-pkt to end the
negotiation and use default version 0. Capabilities (such as
"push-options") are not supported in version 0.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes found a flaky hang in `t5411/test-0013-bad-protocol.sh` in the
osx-clang job of the CI/PR builds, and ran into an issue when using
the `--stress` option with the following error messages:
fatal: unable to write flush packet: Broken pipe
send-pack: unexpected disconnect while reading sideband packet
fatal: the remote end hung up unexpectedly
In this test case, the "proc-receive" hook sends an error message and
dies earlier. While "receive-pack" on the other side of the pipe
should forward the error message of the "proc-receive" hook to the
client side, but it fails to do so. This is because "receive-pack"
uses `packet_write_fmt()` and `packet_flush()` to write pkt-line
message to "proc-receive" hook, and these functions die immediately
when pipe is broken. Using "gently" forms for these functions will get
more predicable output.
Add more "--die-*" options to test helper to test different stages of
the protocol between "receive-pack" and "proc-receive" hook.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option-parsing loop of rev-parse checks whether the first character
of an arg is "-". If so, then it enters a series of conditionals
checking for individual options. But some options are inexplicably
outside of that outer conditional.
This doesn't produce the wrong behavior; the conditional is actually
redundant with the individual option checks, and it's really only its
fallback "continue" that we care about. But we should at least be
consistent.
One obvious alternative is that we could get rid of the conditional
entirely. But we'll be using the extra block it provides in the next
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of the order in which we check options in rev-parse, there are a
few options we accept even after a "--". This is wrong, because the
whole point of "--" is to say "everything after here is a path". Let's
move the "did we see a dashdash" check (it's called "as_is" in the code)
to the top of the parsing loop.
Note there is one subtlety here. The options are ordered so that some
are checked before we even see if we're in a repository (they continue
the loop, and if we get past a certain point, then we do the repository
setup). By moving the as_is check higher, it's also in that "before
setup" section, even though it might look at the repository via
verify_filename(). However, this works out: we'd never set as_is until
we parse "--", and we don't parse that until after doing the setup.
An alternative here to avoid the subtlety is to put the as_is check at
the top of the post-setup options. But then every pre-setup option would
have to remember to check "if (!as_is && !strcmp(...))". So while this
is a bit magical, it's harder for future code to get wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the past 15 years, we've used the hardcoded 64 as the length
limit of the filename of the output from the "git format-patch"
command. Since the value is shorter than the 80-column terminal, it
could grow without line wrapping a bit. At the same time, since the
value is longer than half of the 80-column terminal, we could fit
two or more of them in "ls" output on such a terminal if we allowed
to lower it.
Introduce a new command line option --filename-max-length=<n> and a
new configuration variable format.filenameMaxLength to override the
hardcoded default.
While we are at it, remove a check that the name of output directory
does not exceed PATH_MAX---this check is pointless in that by the
time control reaches the function, the caller would already have
done an equivalent of "mkdir -p", so if the system does not like an
overly long directory name, the control wouldn't have reached here,
and otherwise, we know that the system allowed the output directory
to exist. In the worst case, we will get an error when we try to
open the output file and handle the error correctly anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than passing a string around pass the struct object_id that the
string was created from call oid_hex() when we write the file.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
