Long forms are better to memorize and more reliably uniform across
commands.
Names follow precedents, e.g. "git log --remotes".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long forms are better to memorize and more reliably uniform across
commands.
Design notes:
-u,--local-user is named following the analogous gnupg option.
-l,--list is not an argument taking option but a mode switch.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
A stash is created by save_state() and used by restore_state(). Pass
SHA-1 explicitly for clarity and keep stash[] to cmd_merge().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asked if "refs///heads/master" is valid, check-ref-format says "Yes,
it is well formed", and when asked to print canonical form, it shows
"refs/heads/master". This is so that it can be tucked after "$GIT_DIR/"
to form a valid pathname for a loose ref, and we normalize a pathname like
"$GIT_DIR/refs///heads/master" to de-dup the slashes in it.
Similarly, when asked if "/refs/heads/master" is valid, check-ref-format
says "Yes, it is Ok", but the leading slash is not removed when printing,
leading to "$GIT_DIR//refs/heads/master".
Fix it to make sure such leading slashes are removed. Add tests that such
refnames are accepted and normalized correctly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a test to expose a long-standing bug that is triggered when
cloning with --reference option from a local repository that has its own
alternates. The alternate object stores specified on the command line
are lost, and only alternates copied from the source repository remain.
The bug will be fixed in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -M <foo> <current-branch>" allows updating the current branch
which HEAD points, without the necessary house-keeping that git reset
normally does to make this operation sensible. It also leaves the reflog
in a confusing state (you would be warned when trying to read it).
"git checkout -B <current branch> <foo>" is also partly vulnerable to this
bug; due to inconsistent pre-flight checks it would perform half of its
task and then abort just before rewriting the branch. Again this
manifested itself as the index file getting out-of-sync with HEAD.
"git branch -f" already guarded against this problem, and aborts with
a fatal error.
Update "git branch -M", "git checkout -B" and "git branch -f" to share the
same check before allowing a branch to be created. These prevent you from
updating the current branch.
We considered suggesting the use of "git reset" in the failure message
but concluded that it was not possible to discern what the user was
actually trying to do.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two copies of traverse_commit_list callback that show the object
name followed by pathname the object was found, to produce output similar
to "rev-list --objects".
Unify them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback to traverse_commit_list() are to take linked name_path and
a string for the last path component.
If the callee used its parameters, it would have seen duplicated leading
paths. In this particular case, the callee does not use this argument but
that is not a reason to leave the call broken.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.
This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.
To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the "do we want color" flags default to -1 to
indicate that we don't have any color configured. This value
is handled in one of two ways:
1. In porcelain, we check early on whether the value is
still -1 after reading the config, and set it to the
value of color.ui (which defaults to 0).
2. In plumbing, it stays untouched as -1, and want_color
defaults it to off.
This works fine, but means that every porcelain has to check
and reassign its color flag. Now that want_color gives us a
place to put this check in a single spot, we can do that,
simplifying the calling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git config --get-colorbool color.foo", we use a custom
callback that looks not only for the key that the user gave
us, but also for "diff.color" (for backwards compatibility)
and "color.ui" (as a fallback).
For the former, we use a custom variable to store the
diff.color value. For the latter, though, we store it in the
main "git_use_color_default" variable, turning on color.ui
for any other parts of git that respect this value.
In practice, this doesn't cause any bugs, because git-config
runs without caring about git_use_color_default, and then
exits. But it crosses module boundaries in an unusual and
confusing way, and it makes refactoring color handling
harder than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file-scope global variable head_sha1[] was used to hold the object
name of the current HEAD commit (unless we are about to make an initial
commit). Also there is an independent "static int initial_commit".
Fix all the functions on the call-chain that use these two variables to
take a new "(const) struct commit *current_head" argument instead, and
replace their uses, e.g. "if (initial_commit)" becomes "if (!current_head)"
and a reference to "head_sha1" becomes "current_head->object.sha1".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A malicious server can return ACK with non-existent SHA-1 or not a
commit. lookup_commit() in this case may return NULL. Do not let
fetch-pack crash by accessing NULL address in this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function produces network traffic and should be in fetch-pack. It
has been in commit.c because it needs to iterate (private) graft
list. It can now do so using for_each_commit_graft().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-attr-relative: (29 commits)
test-path-utils: Add subcommand "prefix_path"
test-path-utils: Add subcommand "absolute_path"
git-check-attr: Normalize paths
git-check-attr: Demonstrate problems with relative paths
git-check-attr: Demonstrate problems with unnormalized paths
git-check-attr: test that no output is written to stderr
Rename git_checkattr() to git_check_attr()
git-check-attr: Fix command-line handling to match docs
git-check-attr: Drive two tests using the same raw data
git-check-attr: Add an --all option to show all attributes
git-check-attr: Error out if no pathnames are specified
git-check-attr: Process command-line args more systematically
git-check-attr: Handle each error separately
git-check-attr: Extract a function error_with_usage()
git-check-attr: Introduce a new variable
git-check-attr: Extract a function output_attr()
Allow querying all attributes on a file
Remove redundant check
Remove redundant call to bootstrap_attr_stack()
Extract a function collect_all_attrs()
...
* js/bisect-no-checkout:
bisect: add support for bisecting bare repositories
bisect: further style nitpicks
bisect: replace "; then" with "\n<tab>*then"
bisect: cleanup whitespace errors in git-bisect.sh.
bisect: add documentation for --no-checkout option.
bisect: add tests for the --no-checkout option.
bisect: introduce --no-checkout support into porcelain.
bisect: introduce support for --no-checkout option.
bisect: add tests to document expected behaviour in presence of broken trees.
bisect: use && to connect statements that are deferred with eval.
bisect: move argument parsing before state modification.
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
The first paragraph about flag order is no longer true and is
mentioned in git-checkout-index.txt. The rest is also mentioned in
git-checkout-index.txt.
Remove it and keep uptodate document in one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Check if <path> is a valid git-dir or a valid git-file that points
to a valid git-dir.
We want tests to be independent from the fact that a git-dir may
be a git-file. Thus we changed tests to use this feature.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty tree passed as common ancestor to merge_trees() when
cherry-picking a parentless commit is allocated on the heap and never
freed. Leaking such a small one-time allocation is not a very big
problem, but now that "git cherry-pick" can cherry-pick multiple
commits it can start to add up.
Avoid the leak by storing the fake tree exactly once in the BSS
section (i.e., use a static). While at it, let's add a test to make
sure cherry-picking multiple parentless commits continues to work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence of commands reveals an issue with error
reporting of relative paths:
$ mkdir sub
$ cd sub
$ git ls-files --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
$ git commit --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
This bug is visible only if the normalized path (i.e., the relative
path from the repository root) is longer than the prefix.
Otherwise, the code skips over the normalized path and reads from
an unused memory location which still contains a leftover of the
original command line argument.
So instead, use the existing facilities to deal with relative paths
correctly.
Also fix inconsistency between "checkout" and "commit", e.g.
$ cd Documentation
$ git checkout nosuch.txt
error: pathspec 'Documentation/nosuch.txt' did not match...
$ git commit nosuch.txt
error: pathspec 'nosuch.txt' did not match...
by propagating the prefix down the codepath that reports the error.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
Currently, revert_or_cherry_pick can fail in two ways. If it
encounters a conflict, it returns a positive number indicating the
intended exit status for the git wrapper to pass on; for all other
errors, it calls die(). The latter behavior is inconsiderate towards
callers, as it denies them the opportunity to recover from errors and
do other things.
After this patch, revert_or_cherry_pick will still return a positive
return value to indicate an exit status for conflicts as before, while
for some other errors, it will print an error message and return -1
instead of die()-ing. The cmd_revert and cmd_cherry_pick are adjusted
to handle the fatal errors by die()-ing themselves.
While the full benefits of this patch will only be seen once all the
"die" calls are replaced with calls to "error", its immediate impact
is to change some "fatal:" messages to say "error:" and to add a new
"fatal: cherry-pick failed" message at the end when the operation
fails.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "git cherry-pick --continue" command which uses the
information in ".git/sequencer" to continue a cherry-pick that stopped
because of a conflict or other error. It works by dropping the first
instruction from .git/sequencer/todo and performing the remaining
cherry-picks listed there, with options (think "-s" and "-X") from the
initial command listed in ".git/sequencer/opts".
So now you can do:
$ git cherry-pick -Xpatience foo..bar
... description conflict in commit moo ...
$ git cherry-pick --continue
error: 'cherry-pick' is not possible because you have unmerged files.
fatal: failed to resume cherry-pick
$ echo resolved >conflictingfile
$ git add conflictingfile && git commit
$ git cherry-pick --continue; # resumes with the commit after "moo"
During the "git commit" stage, CHERRY_PICK_HEAD will aid by providing
the commit message from the conflicting "moo" commit. Note that the
cherry-pick mechanism has no control at this stage, so the user is
free to violate anything that was specified during the first
cherry-pick invocation. For example, if "-x" was specified during the
first cherry-pick invocation, the user is free to edit out the message
during commit time. Note that the "--signoff" option specified at
cherry-pick invocation time is not reflected in the commit message
provided by CHERRY_PICK_HEAD; the user must take care to add
"--signoff" during the "git commit" invocation.
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect the user from forgetting about a pending sequencer operation
by immediately erroring out when an existing cherry-pick or revert
operation is in progress like:
$ git cherry-pick foo
... conflict ...
$ git cherry-pick moo
error: .git/sequencer already exists
hint: A cherry-pick or revert is in progress
hint: Use --reset to forget about it
fatal: cherry-pick failed
A naive version of this would break the following established ways of
working:
$ git cherry-pick foo
... conflict ...
$ git reset --hard # I actually meant "moo" when I said "foo"
$ git cherry-pick moo
$ git cherry-pick foo
... conflict ...
$ git commit # commit the resolution
$ git cherry-pick moo # New operation
However, the previous patches "reset: Make reset remove the sequencer
state" and "revert: Remove sequencer state when no commits are
pending" make sure that this does not happen.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick or revert is called on a list of commits, and a
conflict encountered somewhere in the middle, the data in
".git/sequencer" is required to continue the operation. However, when
a conflict is encountered in the very last commit, the user will have
to "continue" after resolving the conflict and committing just so that
the sequencer state is removed. This is how the current "rebase -i"
script works as well.
$ git cherry-pick foo..bar
... conflict encountered while picking "bar" ...
$ echo "resolved" >problematicfile
$ git add problematicfile
$ git commit
$ git cherry-pick --continue # This would be a no-op
Change this so that the sequencer state is cleared when a conflict is
encountered in the last commit. Incidentally, this patch makes sure
that some existing tests don't break when features like "--reset" and
"--continue" are implemented later in the series.
A better way to implement this feature is to get the last "git commit"
to remove the sequencer state. However, that requires tighter
coupling between "git commit" and the sequencer, a goal that can be
pursued once the sequencer is made more general.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normalize the path arguments (relative to the working tree root, if
applicable) before looking up their attributes. This requires passing
the prefix down the call chain.
This fixes two test cases for different reasons:
* "unnormalized paths" is fixed because the .gitattribute-file-seeking
code is not confused into reading the top-level file twice.
* "relative paths" is fixed because the canonical pathnames are passed
to get_check_attr() or get_all_attrs(), allowing them to match the
pathname patterns as expected.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the git-check-attr synopsis, if the '--stdin' option is
used then no pathnames are expected on the command line. Change the
behavior to match this description; namely, if '--stdin' is used but
not '--', then treat all command-line arguments as attribute names.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new usage patterns
git check-attr [-a | --all] [--] pathname...
git check-attr --stdin [-a | --all] < <list-of-paths>
which display all attributes associated with the specified file(s).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no pathnames are passed as command-line arguments and the --stdin
option is not specified, fail with the error message "No file
specified". Add tests of this behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid reusing variable "doubledash" to mean something other than the
expected "position of a double-dash, if any".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apart from its central objective of calling into the picking
mechanism, pick_commits creates a sequencer directory, prepares a todo
list, and even acts upon the "--reset" subcommand. This makes for a
bad API since the central worry of callers is to figure out whether or
not any conflicts were encountered during the cherry picking. The
current API is like:
if (pick_commits(opts) < 0)
print "Something failed, we're not sure what"
So, change pick_commits so that it's only responsible for picking
commits in a loop and reporting any errors, leaving the rest to a new
function called pick_revisions. Consequently, the API of pick_commits
becomes much clearer:
act_on_subcommand(opts->subcommand);
todo_list = prepare_todo_list();
if (pick_commits(todo_list, opts) < 0)
print "Error encountered while picking commits"
Now, callers can easily call-in to the cherry-picking machinery by
constructing an arbitrary todo list along with some options.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same spirit as ".git/sequencer/head" and ".git/sequencer/todo",
introduce ".git/sequencer/opts" to persist the replay_opts structure
for continuing after a conflict resolution. Use the gitconfig format
for this file so that it looks like:
[options]
signoff = true
record-origin = true
mainline = 1
strategy = recursive
strategy-option = patience
strategy-option = ours
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since v1.7.2-rc1~4^2~7 (revert: allow cherry-picking more than
one commit, 2010-06-02), a single invocation of "git cherry-pick" or
"git revert" can perform picks of several individual commits. To
implement features like "--continue" to continue the whole operation,
we will need to store some information about the state and the plan at
the beginning. Introduce a ".git/sequencer/head" file to store this
state, and ".git/sequencer/todo" file to store the plan. The head
file contains the SHA-1 of the HEAD before the start of the operation,
and the todo file contains an instruction sheet whose format is
inspired by the format of the "rebase -i" instruction sheet. As a
result, a typical todo file looks like:
pick 8537f0e submodule add: test failure when url is not configured
pick 4d68932 submodule add: allow relative repository path
pick f22a17e submodule add: clean up duplicated code
pick 59a5775 make copy_ref globally available
Since SHA-1 hex is abbreviated using an find_unique_abbrev(), it is
unambiguous. This does not guarantee that there will be no ambiguity
when more objects are added to the repository.
These two files alone are not enough to implement a "--continue" that
remembers the command-line options specified; later patches in the
series save them too.
These new files are unrelated to the existing .git/CHERRY_PICK_HEAD,
which will still be useful while committing after a conflict
resolution.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--ff" command-line option cannot be used with some other
command-line options. However, parse_args still parses these
incompatible options into a replay_opts structure for use by the rest
of the program. Although pick_commits, the current gatekeeper to the
cherry-pick machinery, checks the validity of the replay_opts
structure before before starting its operation, there will be multiple
entry points to the cherry-pick machinery in future. To futureproof
the code and catch these errors in one place, make sure that an
invalid replay_opts structure is not created by parse_args in the
first place. We still check the replay_opts structure for validity in
pick_commits, but this is an assert() now to emphasize that it's the
caller's responsibility to get it right.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, revert_or_cherry_pick sets up a default git config, parses
command-line arguments, before preparing to pick commits. This makes
for a bad API as the central worry of callers is to assert whether or
not a conflict occured while cherry picking. The current API is like:
if (revert_or_cherry_pick(argc, argv, opts) < 0)
print "Something failed, we're not sure what"
Simplify and rename revert_or_cherry_pick to pick_commits so that it
only has the responsibility of setting up the revision walker and
picking commits in a loop. Transfer the remaining work to its
callers. Now, the API is simplified as:
if (parse_args(argc, argv, opts) < 0)
print "Can't parse arguments"
if (pick_commits(opts) < 0)
print "Error encountered in picking machinery"
Later in the series, pick_commits will also serve as the starting
point for continuing a cherry-pick or revert.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code uses a set of file-scope static variables to tell the
cherry-pick/ revert machinery how to replay the changes, and
initializes them by parsing the command-line arguments. In later
steps in this series, we would like to introduce an API function that
calls into this machinery directly and have a way to tell it what to
do. Hence, introduce a structure to group these variables, so that
the API can take them as a single replay_options parameter. The only
exception is the variable "me" -- remove it since it not an
independent option, and can be inferred from the action.
Unfortunately, this patch introduces a minor regression. Parsing
strategy-option violates a C89 rule: Initializers cannot refer to
variables whose address is not known at compile time. Currently, this
rule is violated by some other parts of Git as well, and it is
possible to get GCC to report these instances using the "-std=c89
-pedantic" option.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions which act on commits currently rely on a file-scope static
variable to be set before they're called. Consequently, the API and
corresponding callsites are ugly and unclear. Remove this variable
and change their API to accept the commit to act on as additional
argument so that the callsites change from looking like
commit = prepare_a_commit();
act_on_commit();
to looking like
commit = prepare_a_commit();
act_on_commit(commit);
This change is also in line with our long-term goal of exposing some
of these functions through a public API.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-x" command-line option is used to record the name of the
original commits being picked in the commit message. The variable
corresponding to this option is named "no_replay" for historical
reasons; the name is especially confusing because the term "replay" is
used to describe what cherry-pick does (for example, in the
documentation of the "--mainline" option). So, give the variable
corresponding to the "-x" command-line option a better name:
"record_origin".
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only place get_encoding uses the global "commit" variable is when
writing an error message explaining that its lone argument was NULL.
Since the function's only caller ensures that a NULL argument isn't
passed, we can remove this check with two beneficial consequences:
1. Since the function doesn't use the global "commit" variable any
more, it won't need to change when we eliminate the global variable
later in the series.
2. Translators no longer need to localize an error message that will
never be shown.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_message_to_msg function has some dead code, an unclear API,
only one callsite. While it originally intended fill up an empty
commit message with the commit object name while picking, it really
doesn't do this -- a bug introduced in v1.5.1-rc1~65^2~2 (Make
git-revert & git-cherry-pick a builtin, 2007-03-01). Today, tests in
t3505-cherry-pick-empty.sh indicate that not filling up an empty
commit message is the desired behavior. Re-implement and inline the
function accordingly, with a beneficial side-effect: don't dereference
a NULL pointer when the commit doesn't have a delimeter after the
header.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable future callers to report a conflict and not die immediately by
introducing a new function called error_resolve_conflict.
Re-implement die_resolve_conflict as a call to error_resolve_conflict
followed by a call to die. Consequently, the message printed by
die_resolve_conflict changes from
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree ...
...
to
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree ...
hint: ...
fatal: Exiting because of an unresolved conflict.
Hints are printed using the same advise function introduced in
v1.7.3-rc0~26^2~3 (Introduce advise() to print hints, 2010-08-11).
Inspired-by: Christian Couder <chistian.couder@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --no-checkout is specified, then the bisection process uses:
git update-ref --no-deref HEAD <trial>
at each trial instead of:
git checkout <trial>
Improved-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do partial commits, git-commit overlays a tree on the
cache and checks pathspecs against the result. Currently, the
overlaying is done using "prefix" which prevents relative pathspecs
with ".." and absolute pathspec from matching when they refer to
files not under "prefix" and absent from the index, but still in
the tree (i.e. files staged for removal).
The point of providing a prefix at all is performance optimization.
If we say there is no common prefix for the files of interest, then
we have to read the entire tree into the index.
But even if we cannot use the working directory as a prefix, we can
still figure out if there is a common prefix for all given paths,
and use that instead. The pathspec_prefix() routine from ls-files.c
does exactly that.
Any use of global variables is removed from pathspec_prefix() so
that it can be called from commit.c.
Reported-by: Reuben Thomas <rrt@sc3d.org>
Analyzed-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take long option names for -A (--after-context), -B (--before-context)
and -C (--context) from GNU grep and add a similar long option name
for -W (--function-context).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, -W, to show the whole surrounding function of a match.
It uses the same regular expressions as -p and diff to find the beginning
of sections.
Currently it will not display comments in front of a function, but those
that are following one. Despite this shortcoming it is already useful,
e.g. to simply see a more complete applicable context or to extract whole
functions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/clone-detached:
clone: always fetch remote HEAD
make copy_ref globally available
consider only branches in guess_remote_head
t: add tests for cloning remotes with detached HEAD
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
The reflog manpage says:
git reflog [show] [log-options] [<ref>]
the subcommand 'show' is the default "in the absence of any
subcommands". Currently this is only true if the user provided either
at least one option or no additional argument at all. For example:
git reflog master
won't work. Change this by actually calling cmd_log_reflog in
absence of any subcommand.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/tag-contains-ab:
Revert clock-skew based attempt to optimize tag --contains traversal
git skew: a tool to find how big a clock skew exists in the history
default core.clockskew variable to one day
limit "contains" traversals based on commit timestamp
tag: speed up --contains calculation
The reset command creates its reflog entry from argv.
However, it does so after having run parse_options, which
means the only thing left in argv is any non-option
arguments. Thus you would end up with confusing reflog
entries like:
$ git reset --hard HEAD^
$ git reset --soft HEAD@{1}
$ git log -2 -g --oneline
8e46cad HEAD@{0}: HEAD@{1}: updating HEAD
1eb9486 HEAD@{1}: HEAD^: updating HEAD
However, we must also consider that some scripts may set
GIT_REFLOG_ACTION before calling reset, and we need to show
their reflog action (with our text appended). For example:
rebase -i (squash): updating HEAD
On top of that, we also set the ORIG_HEAD reflog action
(even though it doesn't generally exist). In that case, the
reset argument is somewhat meaningless, as it has nothing to
do with what's in ORIG_HEAD.
This patch changes the reset reflog code to show:
$GIT_REFLOG_ACTION: updating {HEAD,ORIG_HEAD}
as before, but only if GIT_REFLOG_ACTION is set. Otherwise,
show:
reset: moving to $rev
for HEAD, and:
reset: updating ORIG_HEAD
for ORIG_HEAD (this is still somewhat superfluous, since we
are in the ORIG_HEAD reflog, obviously, but at least we now
mention which command was used to update it).
While we're at it, we can clean up the code a bit:
- Use strbufs to make the message.
- Use the "rev" parameter instead of showing all options.
This makes more sense, since it is the only thing
impacting the writing of the ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
* jk/clone-cmdline-config:
clone: accept config options on the command line
config: make git_config_parse_parameter a public function
remote: use new OPT_STRING_LIST
parse-options: add OPT_STRING_LIST helper
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
Because "diff --cached HEAD" showed an incorrect blob object name on the
LHS of the diff, we ended up updating the index entry with bogus value,
not what we read from the tree.
Noticed by John Nowak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change upload-pack and receive-pack to use the namespace-prefixed refs
when working with the repository, and use the unprefixed refs when
talking to the client, maintaining the masquerade. This allows
clone, pull, fetch, and push to work with a suitably configured
GIT_NAMESPACE.
receive-pack advertises refs outside the current namespace as .have refs
(as it currently does for refs in alternates), so that the client can
use them to minimize data transfer but will otherwise ignore them.
With appropriate configuration, this also allows http-backend to expose
namespaces as multiple repositories with different paths. This only
requires setting GIT_NAMESPACE, which http-backend passes through to
upload-pack and receive-pack.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This optimizes the "recency order" (see pack-heuristics.txt in
Documentation/technical/ directory) used to order objects within a
packfile in three ways:
- Commits at the tip of tags are written together, in the hope that
revision traversal done in incremental fetch (which starts by
putting them in a revision queue marked as UNINTERESTING) will see a
better locality of these objects;
- In the original recency order, trees and blobs are intermixed. Write
trees together before blobs, in the hope that this will improve
locality when running pathspec-limited revision traversal, i.e.
"git log paths...";
- When writing blob objects out, write the whole family of blobs that use
the same delta base object together, by starting from the root of the
delta chain, and writing its immediate children in a width-first
manner, in the hope that this will again improve locality when reading
blobs that belong to the same path, which are likely to be deltified
against each other.
I tried various workloads in the Linux kernel repositories (HEAD at
v3.0-rc6-71-g4dd1b49) packed with v1.7.6 and with this patch, counting how
large seeks are needed between adjacent accesses to objects in the pack,
and the result looks promising. The history has 2072052 objects, weighing
some 490MiB.
* Simple commit-only log.
$ git log >/dev/null
There are 254656 commits in total.
v1.7.6 with patch
Total number of access : 258,031 258,032
0.0% percentile : 12 12
10.0% percentile : 259 259
20.0% percentile : 294 294
30.0% percentile : 326 326
40.0% percentile : 363 363
50.0% percentile : 415 415
60.0% percentile : 513 513
70.0% percentile : 857 858
80.0% percentile : 10,434 10,441
90.0% percentile : 91,985 91,996
95.0% percentile : 260,852 260,885
99.0% percentile : 1,150,680 1,152,811
99.9% percentile : 3,148,435 3,148,435
Less than 2MiB seek: 99.70% 99.69%
95% of the pack accesses look at data that is no further than 260kB
from the previous location we accessed. The patch does not change the
order of commit objects very much, and the result is very similar.
* Pathspec-limited log.
$ git log drivers/net >/dev/null
The path is touched by 26551 commits and merges (among 254656 total).
v1.7.6 with patch
Total number of access : 559,511 558,663
0.0% percentile : 0 0
10.0% percentile : 182 167
20.0% percentile : 259 233
30.0% percentile : 357 304
40.0% percentile : 714 485
50.0% percentile : 5,046 3,976
60.0% percentile : 688,671 443,578
70.0% percentile : 319,574,732 110,370,100
80.0% percentile : 361,647,599 123,707,229
90.0% percentile : 393,195,669 128,947,636
95.0% percentile : 405,496,875 131,609,321
99.0% percentile : 412,942,470 133,078,115
99.5% percentile : 413,172,266 133,163,349
99.9% percentile : 413,354,356 133,240,445
Less than 2MiB seek: 61.71% 62.87%
With the current pack heuristics, more than 30% of accesses have to
seek further than 300MB; the updated pack heuristics ensures that less
than 0.1% of accesses have to seek further than 135MB. This is largely
due to the fact that the updated heuristics does not mix blobs and
trees together.
* Blame.
$ git blame drivers/net/ne.c >/dev/null
The path is touched by 34 commits and merges.
v1.7.6 with patch
Total number of access : 178,147 178,166
0.0% percentile : 0 0
10.0% percentile : 142 139
20.0% percentile : 222 194
30.0% percentile : 373 300
40.0% percentile : 1,168 837
50.0% percentile : 11,248 7,334
60.0% percentile : 305,121,284 106,850,130
70.0% percentile : 361,427,854 123,709,715
80.0% percentile : 388,127,343 128,171,047
90.0% percentile : 399,987,762 130,200,707
95.0% percentile : 408,230,673 132,174,308
99.0% percentile : 412,947,017 133,181,160
99.5% percentile : 413,312,798 133,220,425
99.9% percentile : 413,352,366 133,269,051
Less than 2MiB seek: 56.47% 56.83%
The result is very similar to the pathspec-limited log above, which
only looks at the tree objects.
* Packing recent history.
$ (git for-each-ref --format='^%(refname)' refs/tags; echo HEAD) |
git pack-objects --revs --stdout >/dev/null
This should pack data worth 71 commits.
v1.7.6 with patch
Total number of access : 11,511 11,514
0.0% percentile : 0 0
10.0% percentile : 48 47
20.0% percentile : 134 98
30.0% percentile : 332 178
40.0% percentile : 1,386 293
50.0% percentile : 8,030 478
60.0% percentile : 33,676 1,195
70.0% percentile : 147,268 26,216
80.0% percentile : 9,178,662 464,598
90.0% percentile : 67,922,665 965,782
95.0% percentile : 87,773,251 1,226,102
99.0% percentile : 98,011,763 1,932,377
99.5% percentile : 100,074,427 33,642,128
99.9% percentile : 105,336,398 275,772,650
Less than 2MiB seek: 77.09% 99.04%
The long-tail part of the result looks worse with the patch, but
the change helps majority of the access. 99.04% of the accesses
need less than 2MiB of seeking, compared to 77.09% with the current
packing heuristics.
* Index pack.
$ git index-pack -v .git/objects/pack/pack*.pack
v1.7.6 with patch
Total number of access : 2,791,228 2,788,802
0.0% percentile : 9 9
10.0% percentile : 140 89
20.0% percentile : 233 167
30.0% percentile : 322 235
40.0% percentile : 464 310
50.0% percentile : 862 423
60.0% percentile : 2,566 686
70.0% percentile : 25,827 1,498
80.0% percentile : 1,317,862 4,971
90.0% percentile : 11,926,385 119,398
95.0% percentile : 41,304,149 952,519
99.0% percentile : 227,613,070 6,709,650
99.5% percentile : 321,265,121 11,734,871
99.9% percentile : 382,919,785 33,155,191
Less than 2MiB seek: 81.73% 96.92%
As the index-pack command already walks objects in the delta chain
order, writing the blobs out in the delta chain order seems to
drastically improve the locality of access.
Note that a half-a-gigabyte packfile comfortably fits in the buffer cache,
and you would unlikely to see much performance difference on a modern and
reasonably beefy machine with enough memory and local disks. Benchmarking
with cold cache (or over NFS) would be interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'v1.7.6': (3211 commits)
Git 1.7.6
completion: replace core.abbrevguard to core.abbrev
Git 1.7.6-rc3
Documentation: git diff --check respects core.whitespace
gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabled
t7810: avoid unportable use of "echo"
plug a few coverity-spotted leaks
builtin/gc.c: add missing newline in message
tests: link shell libraries into valgrind directory
t/Makefile: pass test opts to valgrind target properly
sh-i18n--envsubst.c: do not #include getopt.h
Fix typo: existant->existent
Git 1.7.6-rc2
gitweb: do not misparse nonnumeric content tag files that contain a digit
Git 1.7.6-rc1
fetch: do not leak a refspec
t3703: skip more tests using colons in file names on Windows
gitweb: Fix usability of $prevent_xss
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
...
Use the value from 'core.abbrev' configuration variable unless user
specifies the length on command line when showing commit object name
in "branch -v" output.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
> As you probably guessed from the specificity of the number, I wrote a
> short program to actually traverse and find the worst skew. It takes
> about 5 seconds to run (unsurprisingly, since it is doing the same full
> traversal that we end up doing in the above numbers). So we could
> "autoskew" by setting up the configuration on clone, and then
> periodically updating it as part of "git gc".
This patch doesn't implement auto-detection of skew, but is the program
I used to calculate, and would provide the basis for such
auto-detection. It would be interesting to see average skew numbers for
popular repositories. You can run it as "git skew --all".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
Since 03feddd (git-check-ref-format: reject funny ref names, 2005-10-13),
"git branch -d" can take more than one branch names to remove.
The documentation was correct, but the usage string was not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clone does all of init, "remote add", fetch, and checkout
without giving the user a chance to intervene and set any
configuration. This patch allows you to set config options
in the newly created repository after the clone, but before
we do any other operations.
In many cases, this is a minor convenience over something
like:
git clone git://...
git config core.whatever true
But in some cases, it can bring extra efficiency by changing
how the fetch or checkout work. For example, setting
line-ending config before the checkout avoids having to
re-checkout all of the contents with the correct line
endings.
It also provides a mechanism for passing information to remote
helpers during a clone; the helpers may read the git config
to influence how they operate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tar filters may be very expensive to run, so sites do
not want to expose them via upload-archive. This patch lets
users configure tar.<filter>.remote to turn them off.
By default, gzip filters are left on, as they are about as
expensive as creating zip archives.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The process for guessing an archive output format based on
the filename is something like this:
a. parse --output in cmd_archive; check the filename
against a static set of mapping heuristics (right now
it just matches ".zip" for zip files).
b. if found, stick a fake "--format=zip" at the beginning
of the arguments list (if the user did specify a
--format manually, the later option will override our
fake one)
c. if it's a remote call, ship the arguments to the remote
(including the fake), which will call write_archive on
their end
d. if it's local, ship the arguments to write_archive
locally
There are two problems:
1. The set of mappings is static and at too high a level.
The write_archive level is going to check config for
user-defined formats, some of which will specify
extensions. We need to delay lookup until those are
parsed, so we can match against them.
2. For a remote archive call, our set of mappings (or
formats) may not match the remote side's. This is OK in
practice right now, because all versions of git
understand "zip" and "tar". But as new formats are
added, there is going to be a mismatch between what the
client can do and what the remote server can do.
To fix (1), this patch refactors the location guessing to
happen at the write_archive level, instead of the
cmd_archive level. So instead of sticking a fake --format
field in the argv list, we actually pass a "name hint" down
the callchain; this hint is used at the appropriate time to
guess the format (if one hasn't been given already).
This patch leaves (2) unfixed. The name_hint is converted to
a "--format" option as before, and passed to the remote.
This means the local side's idea of how extensions map to
formats will take precedence.
Another option would be to pass the name hint to the remote
side and let the remote choose. This isn't a good idea for
two reasons:
1. There's no room in the protocol for passing that
information. We can pass a new argument, but older
versions of git on the server will choke on it.
2. Letting the remote side decide creates a silent
inconsistency in user experience. Consider the case
that the locally installed git knows about the "tar.gz"
format, but a remote server doesn't.
Running "git archive -o foo.tar.gz" will use the tar.gz
format. If we use --remote, and the local side chooses
the format, then we send "--format=tar.gz" to the
remote, which will complain about the unknown format.
But if we let the remote side choose the format, then
it will realize that it doesn't know about "tar.gz" and
output uncompressed tar without even issuing a warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, "git tag -l foo* bar*" would silently ignore the
second argument, showing only refs starting with "foo". It's
not just unfriendly not to take a second pattern; we
actually generated subtly wrong results (from the user's
perspective) because some of the requested tags were
omitted.
This patch allows an arbitrary number of patterns on the
command line; if any of them matches, the ref is shown.
While we're tweaking the documentation, let's also make it
clear that the pattern is fnmatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the slop value used by name-rev, so presumably is a
reasonable default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for commits that contain other commits (e.g.,
via "git tag --contains"), we can end up traversing useless
portions of the graph. For example, if I am looking for a
tag that contains a commit made last week, there is not much
point in traversing portions of the history graph made five
years ago.
This optimization can provide massive speedups. For example,
doing "git tag --contains HEAD~200" in the linux-2.6
repository goes from:
real 0m5.302s
user 0m5.116s
sys 0m0.184s
to:
real 0m0.030s
user 0m0.020s
sys 0m0.008s
The downside is that we will no longer find some answers in
the face of extreme clock skew, as we will stop the
traversal early when seeing commits skewed too far into the
past.
Name-rev already implements a similar optimization, using a
"slop" of one day to allow for a certain amount of clock
skew in commit timestamps. This patch introduces a
"core.clockskew" variable, which allows specifying the
allowable amount of clock skew in seconds. For safety, it
defaults to "none", causing a full traversal (i.e., no
change in behavior from previous versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know if commit A contains commit B (or any
one of a set of commits, B through Z), we generally
calculate the merge bases and see if B is a merge base of A
(or for a set, if any of the commits B through Z have that
property).
When we are going to check a series of commits A1 through An
to see whether each contains B (e.g., because we are
deciding which tags to show with "git tag --contains"), we
do a series of merge base calculations. This can be very
expensive, as we repeat a lot of traversal work.
Instead, let's leverage the fact that we are going to use
the same --contains list for each tag, and mark areas of the
commit graph is definitely containing those commits, or
definitely not containing those commits. Later tags can then
stop traversing as soon as they see a previously calculated
answer.
This sped up "git tag --contains HEAD~200" in the linux-2.6
repository from:
real 0m15.417s
user 0m15.197s
sys 0m0.220s
to:
real 0m5.329s
user 0m5.144s
sys 0m0.184s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, fetching the remote HEAD explicitly is
unnecessary. It's just a symref pointing to a branch which
we are already fetching, so we will already ask for its sha1.
However, if the remote has a detached HEAD, things are less
certain. We do not ask for HEAD's sha1, but we do try to
write it into a local detached HEAD. In most cases this is
fine, as the remote HEAD is pointing to some part of the
history graph that we will fetch via the refs.
But if the remote HEAD points to an "orphan" commit (one
which was is not an ancestor of any refs), then we will not
have the object, and update_ref will complain when we try to
write the detached HEAD, aborting the whole clone.
This patch makes clone always explicitly ask the remote for
the sha1 of its HEAD commit. In the non-detached case, this
is a no-op, as we were going to ask for that sha1 anyway. In
the regular detached case, this will add an extra "want" to
the protocol negotiation, but will not change the history
that gets sent. And in the detached orphan case, we will
fetch the orphaned history so that we can write it into our
local detached HEAD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
This finally gets rid of the inefficient verify-pack implementation that
walks objects in the packfile in their object name order and replaces it
with a call to index-pack --verify. As a side effect, it also removes
packed_object_info_detail() API which is rather expensive.
As this changes the way errors are reported (verify-pack used to rely on
the usual runtime error detection routine unpack_entry() to diagnose the
CRC errors in an entry in the *.idx file; index-pack --verify checks the
whole *.idx file in one go), update a test that expected the string "CRC"
to appear in the error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The histogram produced by "verify-pack -v" always had an artificial
limit of 50, but index-pack knows what the maximum delta depth is, so
we do not have to limit it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "index-pack" machinery already has almost enough knowledge to produce
the same output as "verify-pack -v". Fill small gaps in its bookkeeping,
and teach it to show what it knows.
Add a few more command line options that do not have to be advertised to
the end users. They will be used internally when verify-pack calls this.
The eventual goal is to remove verify-pack implementation and redo it as a
thin wrapper around the index-pack, so that we can remove the rather
expensive packed_object_info_detail() API.
This still does not do the delta-chain-depth histogram yet but that part
is easy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper function that takes the type of an object and
tell if it is a delta, as we seem to use this check in many places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When create a new branch, we fed "refs/heads/<proposed name>" as a string
to get_sha1() and expected it to fail when a branch already exists.
The right way to check if a ref exists is to check with resolve_ref().
A naïve solution that might appear attractive but does not work is to
forbid slashes in get_describe_name() but that will not work. A describe
name is is in the form of "ANYTHING-g<short sha1>", and that ANYTHING part
comes from a original tag name used in the repository the user ran the
describe command. A sick user could have a confusing hierarchical tag
whose name is "refs/heads/foobar" (stored as refs/tags/refs/heads/foobar")
to generate a describe name "refs/heads/foobar-6-g02ac983", and we should
be able to use that name to refer to the object whose name is 02ac983.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --heading, the filename is printed once before matches from that
file instead of at the start of each line, giving more screen space to
the actual search results.
This option is taken from ack (http://betterthangrep.com/). And now
git grep can dress up like it:
$ git config alias.ack "grep --break --heading --line-number"
$ git ack -e --heading
Documentation/git-grep.txt
154:--heading::
t/t7810-grep.sh
785:test_expect_success 'grep --heading' '
786: git grep --heading -e char -e lo_w hello.c hello_world >actual &&
808: git grep --break --heading -n --color \
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --break, an empty line is printed between matches from different
files, increasing readability. This option is taken from ack
(http://betterthangrep.com/).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 431d6e7b (grep: enable threading for context line printing)
split the printing of the "--\n" mark between results from different
files out into two places: show_line() in grep.c for the non-threaded
case and work_done() in builtin/grep.c for the threaded case. Commit
55f638bd (grep: Colorize filename, line number, and separator) updated
the former, but not the latter, so the separators between files are
not colored if threads are used.
This patch merges the two. In the threaded case, hunk marks are now
printed by show_line() for every file, including the first one, and the
very first mark is simply skipped in work_done(). This ensures that the
output is properly colored and works just as well.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
The previous commit simply hijacked --quiet and essentially made it into a
no-op. Instead, take it as a cue that the end user wants to omit the patch
output from commands that default to show patches, e.g. "show".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "-k" option, mailinfo will convert a folded
subject header like:
Subject: this is a
subject that doesn't
fit on one line
into a single line. With "-k", however, we assumed that
these newlines were significant and represented something
that the sending side would want us to preserve.
For messages created by format-patch, this assumption was
broken by a1f6baa (format-patch: wrap long header lines,
2011-02-23). For messages sent by arbitrary MUAs, this was
probably never a good assumption to make, as they may have
been folding subjects in accordance with rfc822's line
length recommendations all along.
This patch now joins folded lines with a single whitespace
character. This treats header folding purely as a syntactic
feature of the transport mechanism, not as something that
format-patch is trying to tell us about the original
subject.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So 13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
git remote add -t heads/foo -t heads/bar --mirror=fetch
which makes the local "foo" and "bar" branches direct
mirrors of the remote, but does not fetch anything else.
This patch restores the original behavior, but only for
fetch mirrors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
* js/maint-send-pack-stateless-rpc-deadlock-fix:
sideband_demux(): fix decl-after-stmt
send-pack: unbreak push over stateless rpc
send-pack: avoid deadlock when pack-object dies early
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
* js/maint-send-pack-stateless-rpc-deadlock-fix:
sideband_demux(): fix decl-after-stmt
send-pack: unbreak push over stateless rpc
send-pack: avoid deadlock when pack-object dies early
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
The option can be used to check if read-tree with the same set of other
options like "-m" and "-u" would succeed without actually changing either
the index or the working tree.
The relevant tests in the t10?? range were extended to do a read-tree -n
before the real read-tree to make sure neither the index nor any local
files were changed with -n and the same exit code as without -n is
returned. The helper functions added for that purpose reside in the new
t/lib-read-tree.sh file.
The only exception is #13 in t1004 ("unlinking an un-unlink-able
symlink"). As this is an issue of wrong directory permissions it is not
detected with -n.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the merge command was made multi-strategy aware, we said
Merge made by octopus.
at the end of a session. Reword it to
Merge made by the 'octopus' strategy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching away from a detached HEAD with "git checkout", we give a
listing of the commits about to be lost, and then tell how to resurrect
them since 8e2dc6a (commit: give final warning when reattaching HEAD to
leave commits behind, 2011-02-18).
This is a good safety measure for people who are not comfortable with the
detached HEAD state, but the advice on how to keep the state you just left
was given even to those who set advice.detachedHead to false.
Keep the warning and informational commit listing, but honor the setting
of advice.detachedHead to squelch the advice.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Conflicts:
environment.c
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
When receiving a push, we advertise ref tips from any
alternate repositories, in case that helps the client send a
smaller pack. Since these refs don't actually exist in the
destination repository, we don't transmit the real ref
names, but instead use the pseudo-ref ".have".
If your alternate has a large number of duplicate refs (for
example, because it is aggregating objects from many related
repositories, some of which will have the same tags and
branch tips), then we will send each ".have $sha1" line
multiple times. This is a pointless waste of bandwidth, as
we are simply repeating the same fact to the client over and
over.
This patch eliminates duplicate .have refs early on. It does
so efficiently by sorting the complete list and skipping
duplicates. This has the side effect of re-ordering the
.have lines by ascending sha1; this isn't a problem, though,
as the original order was meaningless.
There is a similar .have system in fetch-pack, but it
does not suffer from the same problem. For each alternate
ref we consider in fetch-pack, we actually open the object
and mark it with the SEEN flag, so duplicates are
automatically culled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The foreach_alt_odb function triggers a callback for each
alternate object db we have, with room for a single void
pointer as data. Currently, we always call refs_from_alternate_cb
as the callback function, and then pass another callback (to
receive each ref individually) as the void pointer.
This has two problems:
1. C technically forbids stuffing a function pointer into
a "void *". In practice, this probably doesn't matter
on any architectures git runs on, but it never hurts to
follow the letter of the law.
2. There is no room for an extra data pointer. Indeed, the
alternate_ref_fn that refs_from_alternate_cb calls
takes a void* for data, but we always pass it NULL.
Instead, let's properly stuff our function pointer into a
data struct, which also leaves room for an extra
caller-supplied data pointer. And to keep things simple for
existing callers, let's make a for_each_alternate_ref
function that takes care of creating the extra struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add every local ref to a list so that we can mark them
and all of their ancestors back to a certain cutoff point.
However, if some refs point to the same commit, we will end
up adding them to the list many times.
Furthermore, since commit_lists are stored as linked lists,
we must do an O(n) traversal of the list in order to find
the right place to insert each commit. This makes building
the list O(n^2) in the number of refs.
For normal repositories, this isn't a big deal. We have a
few hundreds refs at most, and most of them are unique. But
consider an "alternates" repo that serves as an object
database for many other similar repos. For reachability, it
needs to keep a copy of the refs in each child repo. This
means it may have a large number of refs, many of which
point to the same commits.
By noting commits we have already added to the list, we can
shrink the size of "n" in such a repo to the number of
unique commits, which is on the order of what a normal repo
would contain (it's actually more than a normal repo, since child repos
may have branches at different states, but in practice it tends
to be much smaller than the list with duplicates).
Here are the results on one particular giant repo
(containing objects for all Rails forks on GitHub):
$ git for-each-ref | wc -l
112514
[before]
$ git fetch --no-tags ../remote.git
63.52user 0.12system 1:03.68elapsed 99%CPU (0avgtext+0avgdata 137648maxresident)k
1856inputs+48outputs (11major+19603minor)pagefaults 0swaps
$ git fetch --no-tags ../remote.git
6.15user 0.08system 0:06.25elapsed 99%CPU (0avgtext+0avgdata 123856maxresident)k
0inputs+40outputs (0major+18872minor)pagefaults 0swaps
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to read object names to remove from the standard
input, in addition to the object names given from the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the application, it is not necessarily an error for an object
to lack a note, especially if the only thing the caller wants to make sure
is that notes are cleared for an object. By passing this option from the
command line, the "git notes remove" command considers it a success if the
object did not have any note to begin with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While "xargs -n1 git notes rm" is certainly a possible way to remove notes
from many objects, this would create one notes "commit" per removal, which
is not quite suitable for seasonal housekeeping.
Allow taking more than one on the command line, and record their removal
as a single atomic event if everthing goes well.
Even though the old code insisted that "git notes rm" must be given only
one object (or zero, in which case it would default to HEAD), this
condition was not tested. Add tests to handle the new case where we feed
multiple objects, and also make sure if there is a bad input, no change
is recorded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" uses its exit status to indicate if it successfully
talked with the remote repository. A new option "--exit-code" makes the
command exit with status "2" when there is no refs to be listed, even when
the command successfully talked with the remote repository.
This way, the caller can tell if we failed to contact the remote, or the
remote did not have what we wanted to see. Of course, you can inspect the
output from the command, which has been and will continue to be a valid
way to check the same thing.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to set a multivar with "git config var value", "git config"
issues
warning: remote.repoor.push has multiple values
leaving the user under the impression that the operation succeeded,
unless one checks the return value.
Instead, make it
warning: remote.repoor.push has multiple values
error: cannot overwrite multiple values with a single value
Use a regexp, --add or --set-all to change remote.repoor.push.
to be clear and helpful.
Note: The "warning" is raised through other code paths also so that it
needs to remain a warning for these (which do not raise the error). Only
the caller can determine how to go on from that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead return an integer that can be given to typename() if
the caller wants a string, just like everybody else does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Although it is probably an uncommon operation, there is no
reason to disallow it, as it works just fine. It is the
reverse of a cherry-pick of a root commit, which is already
allowed.
We do have to tweak one check on whether we have a merge
commit, which assumed we had at least one parent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive strategy already handles root commits;
it cherry-picks the difference between the empty tree and
the root commit's tree.
However, for external strategies, we dereference NULL and
segfault while building the argument list. Instead, let's
handle this by passing the empty tree sha1 to the merge
script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/convert:
convert: make it harder to screw up adding a conversion attribute
convert: make it safer to add conversion attributes
convert: give saner names to crlf/eol variables, types and functions
convert: rename the "eol" global variable to "core_eol"
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config machinery already makes section and variable names
lowercase when parsing them, so using strcasecmp for comparison just
feels wasteful. No noticeable change intended.
Noticed-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no remaining string in argv, get_pathspec(prefix, argv)
will return a two-element array that has prefix as the first element,
so there is no need to re-roll that logic in the code that uses
get_pathspec().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disallow '-' as tag name, as well as tag names starting with '-', as it
would be cumbersome to "git checkout tags/-" because "git checkout -" is
to switch to the previous branch.
Add strbuf_check_tag_ref() as helper to check a refname for a tag.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one made "git grep -P" fail when grep.extendedRegexp is
enabled. That is a no-starter. The option on the command line should
just make the command ignore the configured default. The handling of "-F"
in the existing code has the same problem.
Instead of saying -G/-F/-E/-P incompatible with each other, just allow
the last one win. That way, you can have "[alias] gr = grep -P" and
use Pcre for everyday work e.g. "git gr ':i?foo'", and append -G to the
aliased command line to override it e.g. "git gr -G '[Ff][Oo][Oo]'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interactive flag is already shared by git add and git commit,
share the -p and --patch flags too.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git-grep die() when -P is used on command line together
with -E/--extended-regexp or -F/--fixed-strings.
This also makes it bail out when grep.extendedRegexp is enabled.
But `git grep -G -P pattern` and `git grep -E -G -P pattern` still work
because -G and -E set opts.regflags during parse_options() and there is
no way to detect `-G` or `-E -G`.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just like --porcelain, except that we always output
the commit information for each line, not just the first
time it is referenced. This can make quick and dirty scripts
much easier to write; see the example added to the blame
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for adding more porcelain output
options. The three changes are:
1. emit_porcelain now receives the format option flags
2. emit_one_suspect_detail takes an optional "repeat"
parameter to suppress the "show only once" behavior
3. The code for emitting porcelain suspect is factored
into its own function for repeatability.
There should be no functional changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the two features from builtin/rerere.c to a more library-ish
portion of the codebase. No behaviour change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behaviour of git commit --interactive so that when you abort
the commit (by leaving the commit message empty) the index remains
unchanged.
Hitherto an aborted commit --interactive has added the selected hunks to
the index regardless of whether the commit succeeded or not.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* rj/sparse:
sparse: Fix some "symbol not declared" warnings
sparse: Fix errors due to missing target-specific variables
sparse: Fix an "symbol 'merge_file' not decared" warning
sparse: Fix an "symbol 'format_subject' not declared" warning
sparse: Fix some "Using plain integer as NULL pointer" warnings
sparse: Fix an "symbol 'cmd_index_pack' not declared" warning
Makefile: Use cgcc rather than sparse in the check target
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use parse-options in cmd_log_init instead of manually iterating
through them. This makes the code a bit cleaner but more importantly
allows us to catch the "--quiet" option which causes some of the
log-related commands to misbehave as it would otherwise get passed on
to the diff.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --quiet flag is not meant to be passed on to the diff, as the user
always wants the patches to be produced so catch it and pass it to
reopen_stdout which decides whether to print the filename or not.
Noticed by Paul Gortmaker
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Warning: you are leaving %d commit(s) behind" message added
in v1.7.5-rc0~74^2 (commit: give final warning when reattaching HEAD
to leave commits behind) by Junio C Hamano for translation.
This message requires the use of ngettext() features, and is the first
message to use the Q_() wrapper around ngettext().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages added in v1.7.5-rc0~117^2~2 (checkout: introduce
--detach synonym for "git checkout foo^{commit}") by Junio C Hamano
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "repository '%s' does not exist" message added in
v1.7.4.2~21^2 (clone: die when trying to clone missing local path) by
Jeff King for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark CHERRY_PICK_HEAD related messages in builtin/merge.c that were
added in v1.7.5-rc0~88^2~2 (Introduce CHERRY_PICK_HEAD) by Jay Soffian
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the merge messages that were added in v1.7.5-rc1~17^2 (merge:
merge with the default upstream branch without argument) by Junio C
Hamano for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Could not read from '%s'" message that was added to
builtin/merge.c in v1.7.4.2~25^2 (merge: honor prepare-commit-msg
hook) by Jay Soffian for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add a new "merge-file.h" header
containing the extern declaration of the merge_file() function,
and include the header in the source files that require the
declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add an extern declaration for this
function to the "commit.h" header file, along with all other non-
static functions defined in pretty.c. Also, we remove the function
declaration from builtin/shortlog.c, since it is no longer needed.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git checkout -" is a short-hand for "git checkout @{-1}" to
conveniently switch back to the previous branch, "git merge -" is a
short-hand for "git merge @{-1}" to conveniently merge the previous branch.
It will allow me to say:
$ git checkout -b au/topic
$ git am -s ./+au-topic.mbox
$ git checkout pu
$ git merge -
which is an extremely typical and repetitive operation during my git day.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user sets config.abbrev option, use it as if --abbrev was given. This
is the default value and user can override different abbrev length by
specifying the --abbrev=N command line option.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds the new colors to show-branch that were added a while
back for graph output.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
Currently, "git reflog" overrides some command line options such as
"--format".
Fix this by using the new 2-phase version of cmd_log_init().
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_log_init() sets up some default rev options and then calls
setup_revisions(), so that a caller cannot set up own defaults: Either
they get overriden by cmd_log_init() (if set before) or they override
the command line (if set after). We even complain about this in a
comment to cmd_log_reflog().
Therefore, separate the two steps so that one can still call
cmd_log_init() or, alternatively, cmd_log_init_defaults() followed by
cmd_log_init_finish() (and set defaults in between).
No functional change so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It doesn't make sense to use "-m" on a mirror, since "-m"
sets up the HEAD symref in the remotes namespace, but with
mirror, we are by definition not using a remotes namespace.
Similarly, it does not make much sense to specify refspecs
with --mirror. For a mirror you plan to push to, those
refspecs will be ignored. For a mirror you are fetching
from, there is no point in mirroring, since the refspec
specifies everything you want to grab.
There is one case where "--mirror -t <X>" would be useful.
Because <X> is used as-is in the refspec, and because we
append it to to refs/, you could mirror a subset of the
hierarchy by doing:
git remote add --mirror -t 'tags/*'
But using anything besides a single branch as an argument to
"-t" is not documented and only happens to work, so closing
it off is not a serious regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "notes add" (without -f/--force) will abort when the given object
already has existing notes. This makes sense for the modes of "git notes add"
that would necessarily overwrite the old message (when using the -m/-F/-C/-c
options). However, when no options are given (meaning the notes are created
from scratch in the editor) it is not very user-friendly to abort on existing
notes, and forcing the user to run "git notes edit".
Instead, it is better to simply "redirect" to "git notes edit" automatically,
i.e. open the existing notes in the editor and let the user edit them.
This patch does just that.
This changes the behavior of "git notes add" without options when notes
already exist for the given object, but I doubt that many users really depend
on the previous failure from "git notes add" in this case.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful for other commands besides "git
notes" which want to let users refer to notes by their
shorthand name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fetch-pack-stop-early:
enable "no-done" extension only when fetching over smart-http
* sp/maint-upload-pack-stop-early:
enable "no-done" extension only when serving over smart-http
Last night I had to make these two emergency reverts, but now we have a
better understanding of which part of the topic was broken, let's get rid
of the revert to fix it correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch-pack/upload-pack protocol relies on the underlying transport
(local pipe or TCP socket) to have enough slack to allow one window worth
of data in flight without blocking the writer. Traditionally we always
relied on being able to have two windows of 32 "have"s in flight (roughly
3k bytes) to stream.
The recent "progressive-stride" change allows "fetch-pack" to send up to
1024 "have"s without reading any response from "upload-pack". The
outgoing pipe of "upload-pack" can be clogged with many ACK and NAK that
are unread, while "fetch-pack" is still stuffing its outgoing pipe with
more "have"s, leading to a deadlock.
Revert the change unless we are in stateless rpc (aka smart-http) mode, as
using a large window full of "have"s is still a good way to help reduce
the number of back-and-forth, and there is no buffering issue there (it is
strictly "ping-pong" without an overlap).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'no-done' protocol extension is used, the upload-pack (i.e. the
server side) process stops listening to the fetch-pack after issuing the
final NAK, and starts sending the generated pack data back, but there may
be more "have" send by the latter in flight that the fetch-pack is
expecting to be responded with ACK/NAK. This will typically result in a
deadlock (both will block on write that the other end never reads) or
SIGPIPE on the fetch-pack end (upload-pack will finish writing a small
pack and goes away).
Disable it unless fetch-pack is running under smart-http, where there is
no such streaming issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
This is a synonym for the existing '-n' option, matching GNU grep.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
* jc/fetch-progressive-stride:
fetch-pack: use smaller handshake window for initial request
fetch-pack: progressively use larger handshake windows
fetch-pack: factor out hardcoded handshake window size
Conflicts:
builtin/fetch-pack.c
When we merge into an unborn branch, there are basically two
steps:
1. Write the sha1 of the new commit into the ref pointed
to by HEAD.
2. Update the index with the new content, and check it out
to the working tree.
We currently do them in this order. However, (2) is the step
that is much more likely to fail, since it can be blocked by
things like untracked working tree files. When it does, the
merge fails and we are left with an empty index but an
updated HEAD.
This patch switches the order, so that a failure in updating
the index leaves us unchanged. Of course, a failure in
updating the ref now leaves us with an updated index and
mis-matched HEAD. That is arguably not much better, but it
is probably less likely to actually happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t_e_i() can return -1 or 2 to early shortcut a search. Current code
may use up to two variables to handle it. One for saving return value
from t_e_i temporarily, one for saving return code 2.
The second variable is not needed. If we make sure the first variable
does not change until the next t_e_i() call, then we can do something
like this:
int ret = 0;
while (...) {
if (ret != 2) {
ret = t_e_i();
if (ret < 0) /* no longer interesting */
break;
if (ret == 0) /* skip this round */
continue;
}
/* ret > 0, interesting */
}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes behavior of the two functions. Previously it does
prefix matching only. Now it can also do wildcard matching.
All callers are updated. Some gain wildcard matching (archive,
checkout), others reset pathspec_item.has_wildcard to retain old
behavior (ls-files, ls-tree as they are plumbing).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" without specifying any commit is a no-op by default.
A new option merge.defaultupstream can be set to true to cause such an
invocation of the command to merge the upstream branches configured for
the current branch by using their last observed values stored in their
remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to be very casual in terminology and used <branch>, <ref> and
<rev> more or less interchangeably with <commit>. Match the help text
given by "git merge -h" with that of the documentation.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from builtin_diff_files() is fed to diff_result_code()
by the caller, and all other callees like builtin_diff_index() do not
have their own call to diff_result_code(). Remove the duplicated one
from builtin_diff_files() and let the caller handle it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start the initial request small by halving the INITIAL_FLUSH (we will try
to stay one window ahead of the server, so we would end up giving twice as
many "have" in flight at the very beginning). We may want to tweak these
values even more, taking MTU into account.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The client has to dig the history deeper when more recent parts of its
history do not have any overlap with the server it is fetching from. Make
the handshake window exponentially larger as we dig deeper, with a
reasonable upper cap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The "git fetch" client presents the most recent 32 commits it has to the
server and gives a chance to the server to say "ok, we heard enough", and
continues reporting what it has in chunks of 32 commits, digging its
history down to older commits.
Move the hardcoded size of the handshake window outside the code, so that
we can tweak it more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
When orphaning a commit on a detached HEAD, the warning
currently looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
- commit subject 1
- commit subject 2
- commit subject 3
If you want to keep them by creating a new branch, this
may be a good time to do so with:
git branch new_branch_name 933a615ab0bc566dcfd8c01ec8af159f770d3fe5
Instead of using the "-" list, let's provide a more
traditional oneline format, with the abbreviated sha1 before
each subject. Users are accustomed to seeing commits in this
format, and having the sha1 of each commit can be useful if
you want to cherry-pick instead of creating a new branch.
The new format looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
933a615 commit subject 1
824fcde commit subject 2
fa49b1a commit subject 3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When leaving a detached HEAD, we do a revision walk to make
sure the commit we are leaving isn't being orphaned.
However, this leaves crufty marks in the commit objects
which can confuse later walkers, like the one in
stat_tracking_info.
Let's clean up after ourselves to prevent this conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* uk/ls-remote-in-get-remote-url:
git-request-pull: open-code the only invocation of get_remote_url
get_remote_url(): use the same data source as ls-remote to get remote urls
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper function split from the receiving end of "git push" to
allow the same optimization on the receiving end of "git fetch".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.0-rc0~34 (make "mktag" a built-in, 2010-01-22), git mktag
uses the C99-style %td format to print ptrdiff_t values. It falls
back to %d when NO_C99_FORMAT is set, on the assumption that pre-C99
systems probably are using 32-bit pointers.
But many modern systems are 64-bit and
* sometimes one wants to test the NO_C99_FORMAT fallbacks using a
modern development platform;
* some platforms (I'm looking at you, msvc) have not gotten with the
program and are still C89-only.
These ptrdiff_t values are offsets from the beginning of a buffer, so
a size_t or uintmax_t would work about as well. Use the latter so we
can take advantage of the PRIuMAX fallback in git-compat-util.h, even
on C99-challenged systems with 64-bit pointers.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Readers uninterested in the details of "git cherry"'s output format
can see
print_commit('-', commit, verbose, abbrev);
and ignore the details.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If enabled on the connection "multi_ack_detailed no-done" as a
pair allows the remote upload-pack process to send a PACK down
to the client as soon as a "ACK %s ready" message was also sent.
Over git:// and ssh:// where a bi-directional stream is in place
this has very little difference over the classical version that
waits for the client to send a "done\n" line by itself. It does
slightly reduce the latency involved to start the pack stream as
there is one less round-trip from client->server required.
Over smart HTTP this avoids needing to send a final RPC that has
all of the prior common objects. Instead the server is able to
return a pack as soon as its ready to. For many common users the
smart HTTP fetch is now just 2 requests: GET .../info/refs, and
a POST .../git-upload-pack to not only negotiate but also receive
the pack stream. Only users who have more than 32 local unshared
commits with the remote will need additional requests to negotiate
a common merge base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multi_ack_detailed was selected in the protocol capabilities
(both client and server are >= Git 1.6.6) the upload-pack side will
send "ACK %s ready" when it knows how to safely cut the graph and
produce a reasonable pack for the want list that was already sent
on the connection.
Upon receiving "ACK %s ready" there is no point in looking at
the remaining commits inside of rev_list. Sending additional
"have %s" lines to the remote will not construct a smaller pack.
It is unlikely a commit older than the current cut point will have
a better delta base than the cut point itself has.
The original design of this code had fetch-pack empty rev_list by
marking a commit and its transitive ancestors COMMON whenever the
remote side said "ACK %s {continue,common}" and skipping over any
already COMMON commits during get_rev(). This approach does not
work when most of rev_list is actually COMMON_REF, commits that
are pointed to by a reference on the remote, which exist locally,
and which have not yet been sent to the remote as a "have %s" line.
Most of the common references are tags in the ref/tags namespace,
using points in the commit graph that are more than 1 commit apart.
In git.git itself, this is currently 340 tags, 339 of which point to
commits in the commit graph. fetch-pack pushes all of these into
rev_list, but is unable to mark them COMMON and discard during a
remote's "ACK %s {continue,common}" because it does not parse through
the entire parent chain. Not parsing the entire parent chain is
an optimization to avoid walking back to the roots of the repository.
Assuming the client is only following the remote (and does not make
its own local commits), the client needs 11 rounds to spin through
the entire list of tags (32 commits per round, ceil(339/32) == 11).
Unfortunately the server knows on the first "have %s" line that
it can produce a good pack, and does not need to see the remaining
320 tags in the other 10 rounds.
Over git:// and ssh:// this isn't as bad as it sounds, the client is
only transmitting an extra 16,000 bytes that it doesn't need to send.
Over smart HTTP, the client must do an additional 10 HTTP POST
requests, each of which incurs round-trip latency, and must upload
the entire state vector of all known common objects. On the final
POST request, this is 16 KiB worth of data.
Fix all of this by clearing rev_list as soon as the remote side
says it can construct a pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate messages that use the `me' variable. These are all error
messages referencing the command name, so the name shouldn't be
translated.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use sprintf format for the error message that's displayed if
GIT_NOTES_REWRITE_MODE is invalid, and leave a note in a TRANSLATORS
comment indicating what the message means.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Auto packing the repository" message into quiet and
verbose variants to make translation easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "clean.requireForce set/defaults to true..." die()
message to make it easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the messages in git-reset that use the reset_type_names static
array to be translatable by marking the array items with N_() and
using _() later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the basic git-mv messages translatable, but skip things like "rm
'%s'\n" and "git rm '%s'\n" for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize messages made by assigning to the "bad" char* variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "(non-fast-forward)" message from printf directives and
make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate a "[rejected]" message spotted by Jeff King, and other
things in update_local_ref along with it.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Switched to and reset branch" and "Switched to a new
branch" messages to make them easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "does not have our/their version" message to make it
easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be done better by splitting it up, but it would change too
much code, which I'm trying to avoid at this point. Instead add a
TRANSLATORS comment to explain what "remote " does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Unstaged changes after refreshing the index:"
translatable. It's displayed under `git add --refresh --verbose`.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the "Cloning into %s" and "Cloning into bare repository %s"
messages to make them easier to translate. No noticeable change
intended.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.
I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the line number the patch intended to touch does not match
the line in the version being patched, GNU patch reports that
it applied the hunk at a different line number, with how big an
offset.
Teach "git apply" to do the same under --verbose option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
When looking for a place to apply a hunk, we used to check lines that
match the preimage of it, starting from the line that the patch wants to
apply the hunk at, looking forward and backward with increasing offsets
until we find a match.
Colin Guthrie found an interesting case where this misapplied a patch that
wanted to touch a preimage that consists of
}
}
return 0;
}
which is a rather unfortunately common pattern.
The target version of the file originally had only one such location, but
the hunk immediately before that created another instance of such block of
lines, and find_pos() happily reported that the preimage of the hunk
matched what it wanted to modify.
Oops.
By marking the lines application of earlier hunks touched and preventing
match_fragment() from considering them as a match with preimage of other
hunks, we can reduce such an accident.
I also considered to teach apply_one_fragment() to take the offset we have
found while applying the previous hunk into account when looking for a
match with find_pos(), but dismissed that approach, because it would
sometimes work better but sometimes worse, depending on the difference
between the version the patch was created against and the version the
patch is being applied.
This does _not_ prevent misapplication of patches to a file that has many
similar looking blocks of lines and a preimage cannot identify which one
of them should be applied. For that, we would need to scan beyond the
first match in find_pos(), and issue a warning (or error out). That will
be a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is to create a new branch and push it (checkout -b &&
push [--set-upstream]). In this case, the user was getting "The current
branch %s has no upstream branch.", which doesn't help much.
Provide the user a command to push the current branch. To avoid the
situation in the future, suggest --set-upstream.
While we're there, also improve the error message in the "detached HEAD"
case. We mention explicitly "detached HEAD" since this is the keyword to
look for in documentations.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formerly implemented algorithm behaved differently to
remote.c:remote_get() at least for remotes that contain a slash. While the
former just assumes a/b is a path the latter checks the config for
remote."a/b" first which is more reasonable.
This removes the last user of git-parse-remote.sh:get_data_source(), so
this function is removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere forget is a destructive command. When invoked without a path, it
operates on the current directory, potentially deleting many recorded
conflict resolutions.
To make the command safer, a path must be specified as of git 1.8.0. Until
then, give users time to write 'git rerere forget .' if they really mean
the entire current directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack v2 .idx file usually records offset using 64-bit representation
only when the offset does not fit within 31-bit, but you can handcraft
your .idx file to record smaller offset using 64-bit, storing all zero
in the upper 4-byte. By inspecting the original idx file when running
index-pack --verify, encode such low offsets that do not need to be in
64-bit but are encoded using 64-bit just like the original idx file so
that we can still validate the pack/idx pair by comparing the idx file
recomputed with the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.
All the objects in the .pack file are validated during this operation as
well. Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.
This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte. The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.
Group the entries also by type to eliminate the potential of false hits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
