"git worktree" learned move and remove subcommands.
* nd/worktree-move:
t2028: fix minor error and issues in newly-added "worktree move" tests
worktree remove: allow it when $GIT_WORK_TREE is already gone
worktree remove: new command
worktree move: refuse to move worktrees with submodules
worktree move: accept destination as directory
worktree move: new command
worktree.c: add update_worktree_location()
worktree.c: add validate_worktree()
Two subcommands are added for completion: merge and get-ref. get-ref
is more like plumbing. But since it does not share the prefix with any
other subcommands, it won't slow anybody down.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new subcommand that takes these options is 'git notes edit'. Just
accept the options from subcommands since we handle them the same way
in builtin/notes.c anyway. If a user does
git prune --reuse-message=...
just let the command catches that error when it's executed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds completion for 'git notes remove' and 'git notes edit'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is not a strong reason to hide this option, and git-merge already
completes this one. Let's allow to complete this for all commands (and
let git-completion.bash do the suppressing if needed).
This makes --rerere-autoupdate completable for am, cherry-pick and
revert. rebase completion is fixed manually because it's a shell
script and does not benefit from --git-completion-helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
Clarify how configured fetch refspecs interact with the "--prune"
option of "git fetch", and also add a handy short-hand for getting
rid of stale tags that are locally held.
* ab/fetch-prune:
fetch: make the --prune-tags work with <url>
fetch: add a --prune-tags option and fetch.pruneTags config
fetch tests: add scaffolding for the new fetch.pruneTags
git-fetch & config doc: link to the new PRUNING section
git remote doc: correct dangerous lies about what prune does
git fetch doc: add a new section to explain the ins & outs of pruning
fetch tests: fetch <url> <spec> as well as fetch [<remote>]
fetch tests: expand case/esac for later change
fetch tests: double quote a variable for interpolation
fetch tests: test --prune and refspec interaction
fetch tests: add a tag to be deleted to the pruning tests
fetch tests: re-arrange arguments for future readability
fetch tests: refactor in preparation for testing tag pruning
remote: add a macro for "refs/tags/*:refs/tags/*"
fetch: stop accessing "remote" variable indirectly
fetch: trivially refactor assignment to ref_nr
fetch: don't redundantly NULL something calloc() gave us
In some projects contributions from groups are only accepted from a
common group email address. But every individual may want to receive
replies to her own personal address. That's what we have 'Reply-To'
headers for in SMTP. So introduce an optional '--reply-to' command
line option.
This patch re-uses the $reply_to variable. This could break
out-of-tree patches!
Signed-off-by: Christian Ludwig <chrissicool@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options for "worktree add" are:
--checkout
--guess-remote
--lock
--track
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--color
--format=
--ignore-case
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --null and --show-stash.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --gpg-sign
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_revert() unless the operation is in
progress. This helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--intent-to-add
--quiet
--recurse-submodules
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is really nice. Since pull_options[] already declares all
passthru options to 'merge' or 'fetch', a single
git pull --git-completion-helper
would provide all completable options (--no- variants are a separate
issue). Dead shell variables can now be deleted.
New completable options are:
--allow-unrelated-histories
--ipv4
--ipv6
--jobs
--refmap=
--signoff
--strategy-option=
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty (notes add and notes append)
--for-rewrite= (notes copy)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options are:
--allow-unrelated-histories
--message=
--overwrite-ignore
--signoff
--strategy-option=
--summary
--verify
The variable $__git_merge_options remains because _git_pull() still
needs it. It will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --quiet and --upload-pack=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --separate-git-dir=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--connectivity-only
--dangling
--progress
--reflogs
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options:
--deepen=
--ipv4
--ipv6
--jobs=
--multiple
--progress
--refmap=
--shallow-exclude=
--shallow-since=
--update-head-ok
Since _git_pull() needs fetch options too, $__git_fetch_options
remains. This variable will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we can't automatically extract diff options for completion yet,
difftool will take all options from $__git_diff_common_options. This
brings _a lot_ more completable options to difftool.
--ignore-submodules is added to $__git_diff_common_options to avoid
regression in difftool. But it's a good thing anyway even for other
diff commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new comletable options are:
--branch
--gpg-sign
--long
--no-post-rewrite
--null
--porcelain
--status
--allow-empty is no longer completable because it's a hidden option
since 4741edd549 (Remove deprecated OPTION_BOOLEAN for parsing arguments
- 2013-08-03)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --exclude and --interactive
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty
--allow-empty-message
--ff
--gpg-sign
--keep-redundant-commits
--strategy-option
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_cherry_pick() unless the operation is in
progress. This helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--ignore-other-worktrees
--progress
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--3way
--allow-overlap
--build-fake-ancestor=
--directory
--exclude
--include
--index-info is no longer completable but that's because it's renamed to
--build-fake-ancestor in 26b2800768 (apply: get rid of --index-info in
favor of --build-fake-ancestor - 2007-09-17)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--directory
--exclude
--gpg-sign
--include
--keep-cr
--keep-non-patch
--message-id
--no-keep-cr
--patch-format
--quiet
--reject
--resolvemsg=
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_am() unless the operation is in progress. This
helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are
--all
--ignore-missing
--ignore-removal
--renormalize
--verbose
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a __gitcomp wrapper that will execute
git ... --git-completion-helper
to get the list of completable options. The call will be made only
once and cached to avoid performance issues, especially on Windows.
__gitcomp_builtin() allows callers to change its output a bit by adding
some more options, or removing some.
- Current --git-completion-helper for example does not output --no-foo
form, this has to be added manually by __gitcomp_builtin() callers
when necessary
- Some options from --git-completion-helper should only be available in
certain conditions (e.g. --continue and friends). __gitcomp_builtin()
callers can remove them if the conditions are not met.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The anchor string "Available strategies are:" is translatable so
__git_list_merge_strategies may fail to collect available strategies
from 'git merge' on non-C locales. Force C locale on this command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the shell prompt script (in contrib/) to strip trailing CR
from strings read from various "state" files.
* ra/prompt-eread-fix:
git-prompt: fix reading files with windows line endings
git-prompt: make __git_eread intended use explicit
If any of the files read by __git_eread have \r\n line endings, read
will only strip \n, leaving \r. This results in an ugly prompt, where
instead of
user@pc MINGW64 /path/to/repo (BARE:master)
the last parenthesis is printed over the beginning of the prompt like
)ser@pc MINGW64 /path/to/repo (BARE:master
This patch fixes the issue by changing the internal field separator
variable IFS to $'\r\n' before using the read builtin command.
Note that ANSI-C Quoting/POSIX Quoting ($'...') is supported by bash
as well as zsh, which are the current targets of git-prompt, cf.
contrib/completion/git-prompt.sh.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_eread is used to read a single line of a given file (if it exists)
into a single variable stripping the EOL.
This patch removes the unused capability to split file contents into tokens
by passing multiple variable names. Add a comment and explicitly use $2
instead of misleading $@ as argument to the read builtin command.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell completion (in contrib/) learned that "git pull" can take
the "--autostash" option.
* ac/complete-pull-autostash:
completion: add --autostash and --no-autostash to pull
Command line completion (in contrib/) has been taught about the
"--copy" option of "git branch".
* tz/complete-branch-copy:
completion: add '--copy' option to 'git branch'
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
The "diff" family of commands learned to ignore differences in
carriage return at the end of line.
* jc/ignore-cr-at-eol:
diff: --ignore-cr-at-eol
xdiff: reassign xpparm_t.flags bits
Ideally we should only autocomplete if pull has --rebase since
they only work with it but could not figure out how to do that
and the error message of doing git pull --autostash points out
that you need --rebase so i guess it's good enough
Signed-off-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the mailing address of FSF to a URL, as FSF prefers.
* tz/fsf-address-update:
Replace Free Software Foundation address in license notices
Replace Free Software Foundation address in license notices
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
In the commits 1fc458d9 (builtin/checkout: add --recurse-submodules
switch, 2017-03-14), 08d595dc (checkout: add --ignore-skip-worktree-bits
in sparse checkout mode, 2013-04-13) and 32669671 (checkout: introduce
--detach synonym for "git checkout foo^{commit}", 2011-02-08) checkout
gained new flags but the completion was not updated, although these flags
are useful completions. Add them.
The flags --force and --ignore-other-worktrees are not added as they are
potentially dangerous.
The flags --progress and --no-progress are only useful for scripting and are
therefore also not included.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the flags for broken and dirty were implemented in
b0176ce6b5 (builtin/describe: introduce --broken flag, 2017-03-21)
and 9f67d2e827 (Teach "git describe" --dirty option, 2009-10-21)
the completion was not updated, although these flags are useful
completions. Add them.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing completions for git config advice:
* advice.amWorkDir
* advice.pushAlreadyExists
* advice.pushFetchFirst
* advice.pushNeedsForce
* advice.pushNonFFCurrent
* advice.pushNonFFMatching
* advice.pushUpdateRejected
* advice.rmHints
* advice.statusUoption
Remove completion for git config advice.pushNonFastForward,
since it was renamed to pushUpdateRejected in 1184564eac.
The config still works, but is no longer part of the documentation.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing completions for git config core:
* core.checkStat
* core.commentChar
* core.hideDotFiles
* core.hooksPath
* core.packedRefsTimeout
* core.precomposeUnicode
* core.protectHFS
* core.protectNTFS
* core.splitIndex
* core.sshCommand
Note that some configs are only used for some platforms
(hideDotFiles on Windows and precomposeUnicode on Mac).
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
When introducing git stash push in f5727e26e4 ("stash: introduce push
verb", 2017-02-19), I forgot to add it to the completion code. Add it
now.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" learned the "--no-tags" option not to fetch all tags
initially, and also set up the tagopt not to follow any tags in
subsequent fetches.
* ab/clone-no-tags:
tests: rename a test having to do with shallow submodules
clone: add a --no-tags option to clone without tags
tests: change "cd ... && git fetch" to "cd &&\n\tgit fetch"
The colors in which "git status --short --branch" showed the names
of the current branch and its remote-tracking branch are now
configurable.
* sk/status-short-branch-color-config:
status: add color config slots for branch info in "--short --branch"
status: fix missing newline when comment chars are disabled
Without this change, the completion script does not work, as Bash expects
its scripts to have line feeds as end-of-line markers (this is
particularly prominent in quoted multi-line strings, where carriage
returns would slip into the strings as verbatim characters otherwise).
This change is required to let t9902-completion pass when Git's source
code is checked out with `core.autocrlf = true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion for "git checkout <branch>" that auto-creates the branch
out of a remote tracking branch can now be disabled, as this
completion often gets in the way when completing to checkout an
existing local branch that happens to share the same prefix with
bunch of remote tracking branches.
* jk/complete-checkout-sans-dwim-remote:
completion: optionally disable checkout DWIM
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we complete branch names for "git checkout", we also
complete remote branch names that could trigger the DWIM
behavior. Depending on your workflow and project, this can
be either convenient or annoying.
For instance, my clone of gitster.git contains 74 local
"jk/*" branches, but origin contains another 147. When I
want to checkout a local branch but can't quite remember the
name, tab completion shows me 251 entries. And worse, for a
topic that has been picked up for pu, the upstream branch
name is likely to be similar to mine, leading to a high
probability that I pick the wrong one and accidentally
create a new branch.
This patch adds a way for the user to tell the completion
code not to include DWIM suggestions for checkout. This can
already be done by typing:
git checkout --no-guess jk/<TAB>
but that's rather cumbersome. The downside, of course, is
that you no longer get completion support when you _do_ want
to invoke the DWIM behavior. But depending on your workflow,
that may not be a big loss (for instance, in git.git I am
much more likely to want to detach, so I'd type "git
checkout origin/jk/<TAB>" anyway).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
Command line completion updates.
* sg/completion-ctags:
completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'
completion: extract completing ctags symbol names into helper function
completion: put matching ctags symbol names directly into COMPREPLY
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
