This will make it a little less posix-dependent, and more efficient.
Included is also a minor doc improvement.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where possible, capture the output of the git command and display it
if the command fails.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to revert a file if it is modified in an existing buffer but
not saved. On success, revert the buffers that contains the files that
have been reverted.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It reverts the commit and sets up the status and edit log buffer to
allow making changes and recommitting it. Bound to C-c C-a.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of recursing into directories that only contain unknown files,
display only the directory itself. Its contents can be expanded with
git-find-file (bound to C-m).
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set the needs-refresh flag when inserting a new file info, since
ewoc refreshes it upon insert already; this makes a full refresh twice
as fast.
Also make git-fileinfo-prettyprint a little faster by not retrieving
permission values twice.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just setting the state to up-to-date, retrieve the full
state again, so that the file type can be displayed properly.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip non-zero stage files during git-ls-files -c, they are handled
later. Also fix git-insert-info-list to merge duplicate file names.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle the T status from git-diff-index to display type changes
between file/symlink/subproject. Also always show the file type for
symlink and subprojects to indicate that they are not normal files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows displaying correctly the executable flag for the initial
commit, and will make it possible to show the file type for up-to-date
symlinks and subprojects.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of the new log-edit feature that allows to show a diff
with C-c C-d while editing the log message.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally written by Rémi Vanicat, I just changed the layout a little.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead print a single message around sequences of commands that can
potentially take some time.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior for each state can be customized, and it can also
be toggled directly from the status buffer.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes insertions and updates much more efficient.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows jumping to the correct file with the diff-mode commands.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also don't require .git/info/exclude to exist in order to list unknown
files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without argument the mode is toggled, which would do the wrong thing
if the file was already open.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we know which files have been modified, we can now run diff-index
or ls-files with a file list to refresh only the specified files
instead of the whole project.
This also allows proper refreshing of files upon add/delete/resolve,
instead of making assumptions about the new file state.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a description of the commit to the reflog using the first line of
the log message, the same way the git-commit script does it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use git-log --pretty=oneline to print a short description of the
current HEAD (and merge heads if any) in the buffer header.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Run the pre-commit and post-commit hooks at appropriate places, and
display their output if any.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a git-am or git-rebase is in progress, fill the commit log buffer
from the commit information found in the various files in the .dotest
directory.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also avoid inserting an extra newline if other signoff lines are
present.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If not otherwise specified, take the default coding system for commits
from the 'i18n.commitencoding' repository configuration value.
Also set the buffer-file-coding-system variable in the log buffer to
make the selected coding system visible on the modeline.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also use `concat' instead of `format' in the pretty-printer since
format doesn't preserve properties under XEmacs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, reinitialize the keywords after the fact. This avoids
conflicts with other users of log-edit mode, like pcl-cvs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It doesn't make a difference for git.el, but it helps when interacting
with git-rebase and friends.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The deleted file should be labeled "renamed to" and the added file
"renamed from", not the other way around (duh!)
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, running git-status again will now reuse an existing buffer
that displays the same directory. The old behavior of always creating
a new buffer can be obtained by customizing the git-reuse-status-buffer
option.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way the ignore command will really only ignore the marked files
and not files with the same name in subdirectories.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
