Code cleanup.
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This makes the intent clearer and avoids
potential issues with printf format specifiers.
02962d3684 already converted six cases,
this patch covers eleven more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both sha1_to_hex_r() and oid_to_hex_r() take two parameters, so use two
expressions in the semantic patch for transforming calls of the former
to the latter one.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The algorithm in diff-highlight only understands how to look
at two sides of a diff; it cannot correctly handle combined
diffs with multiple preimages. Often highlighting does not
trigger at all for these diffs because the line counts do
not match up. E.g., if we see:
- ours
-theirs
++resolved
we would not bother highlighting; it naively looks like a
single line went away, and then a separate hunk added
another single line.
But of course there are exceptions. E.g., if the other side
deleted the line, we might see:
- ours
++resolved
which looks like we dropped " ours" and added "+resolved".
This is only a small highlighting glitch (we highlight the
space and the "+" along with the content), but it's also the
tip of the iceberg. Even if we learned to find the true
content here (by noticing we are in a 3-way combined diff
and marking _two_ characters from the front of the line as
uninteresting), there are other more complicated cases where
we really do need to handle a 3-way hunk.
Let's just punt for now; we can recognize combined diffs by
the presence of extra "@" symbols in the hunk header, and
treat them as non-diff content.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have a test suite for diff highlight, we can
show off the improvements from 8d00662 (diff-highlight: do
not split multibyte characters, 2015-04-03).
While we're at it, we can also add another case that
_doesn't_ work: combining code points are treated as their
own unit, which means that we may stick colors between them
and the character they are modifying (with the result that
the color is not shown in an xterm, though it's possible
that other terminals err the other way, and show the color
but not the accent). There's no fix here, but let's
document it as a failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the same as in the normal t/.gitignore, with the
exception of ".prove", as our Makefile does not support it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow completion of refs with a ^ prefix. This allows completion of
commands like 'git log HEAD ^origin/master'.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Irfan Adilovic <irfanadilovic@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"import-tars" fast-import script (in contrib/) used to ignore a
hardlink target and replaced it with an empty file, which has been
corrected to record the same blob as the other file the hardlink is
shared with.
* js/import-tars-hardlinks:
import-tars: support hard links
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
The build procedure for "git persistent-https" helper (in contrib/)
has been updated so that it can be built with more recent versions
of Go.
* pm/build-persistent-https-with-recent-go:
contrib/persistent-https: use Git version for build label
contrib/persistent-https: update ldflags syntax for Go 1.7+
"git merge" in Git v2.9 was taught to forbid merging an unrelated
lines of history by default, but that is exactly the kind of thing
the "--rejoin" mode of "git subtree" (in contrib/) wants to do.
"git subtree" has been taught to use the "--allow-unrelated-histories"
option to override the default.
* da/subtree-2.9-regression:
subtree: fix "git subtree split --rejoin"
t7900-subtree.sh: fix quoting and broken && chains
Teach git-completion.bash to complete --submodule= for git commands
which take diff options. Also teach completion for git-log to support
--diff-algorithms as well.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style fixes for "git subtree" (in contrib/).
* da/subtree-modernize:
subtree: adjust function definitions to match CodingGuidelines
subtree: adjust style to match CodingGuidelines
"git jump" script (in contrib/) has been updated a bit.
* jk/git-jump:
contrib/git-jump: fix typo in README
contrib/git-jump: add whitespace-checking mode
contrib/git-jump: fix greedy regex when matching hunks
The build procedure for "git persistent-https" helper (in contrib/)
has been updated so that it can be built with more recent versions
of Go.
* pm/build-persistent-https-with-recent-go:
contrib/persistent-https: use Git version for build label
contrib/persistent-https: update ldflags syntax for Go 1.7+
"git merge" in Git v2.9 was taught to forbid merging an unrelated
lines of history by default, but that is exactly the kind of thing
the "--rejoin" mode of "git subtree" (in contrib/) wants to do.
"git subtree" has been taught to use the "--allow-unrelated-histories"
option to override the default.
* da/subtree-2.9-regression:
subtree: fix "git subtree split --rejoin"
t7900-subtree.sh: fix quoting and broken && chains
Previously, we simply treated hard links as if they were plain files
with size 0, ignoring the link type "1" and hence the link target.
What we should do instead, of course, is to use the link target to get
at the import mark for the contents, even if we cannot recreate the hard
link per se, as Git has no concept of hard links.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
We prefer a space between the function name and the parentheses, and no
space inside the parentheses.
The opening "{" should also be on the same line.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer "test" over "[ ... ]", use double-quotes around variables, break
long lines, and properly indent "case" statements.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" in v2.9 prevents merging unrelated histories.
"git subtree split --rejoin" creates unrelated histories when
creating a split repo from a raw sub-directory that did not
originate from an invocation of "git subtree add".
Restore the original behavior by passing --allow-unrelated-histories
when merging subtrees. This ensures that the synthetic history
created by "git subtree split" can be merged.
Add a test to ensure that this feature works as advertised.
Reported-by: Brett Cundal <brett.cundal@iugome.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow whitespace in arguments to subtree_test_create_repo.
Add missing && chains.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have whitespace errors in lines you've introduced, it
can be convenient to be able to jump directly to them for
fixing. You can't quite use "git jump diff" for this,
because though it passes arbitrary options to "git diff", it
expects to see an actual unified diff in the output.
Whereas "git diff --check" actually produces lines that look
like compiler quickfix lines already, meaning we just need
to run it and feed the output directly to the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hunk-header regex looks for "\+\d+" to find the
post-image line numbers, but it skips the pre-image line
numbers with a simple ".*". That means we may greedily eat
the post-image numbers and match a "\+\d" further on, in the
funcname text.
For example, commit 6b9c38e has this hunk header:
diff --git a/t/t0006-date.sh b/t/t0006-date.sh
[...]
@@ -50,8 +50,8 @@ check_show iso-local "$TIME" '2016-06-15 14:13:20 +0000'
If you run:
git checkout 6b9c38e
git jump diff HEAD^ t/
it will erroneously match "+0000" as the starting line
number and jump there, rather than line 50.
We can fix it by just making the "skip" regex non-greedy,
taking the first "+" we see, which should be the post-image
line information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous method simply used the UNIX timestamp of when the binary was
built as its build label.
$ make && ./git-remote-persistent-http -print_label
1469061546
This patch aims to align the label for this binary with the Git version
contained in the GIT-VERSION-FILE. This gives a better sense of the version
of the binary as it can be mapped to a particular revision or release of
Git itself. For example:
$ make && ./git-remote-persistent-http -print_label
2.9.1.275.g75676c8
Discussion of this patch is available on a related thread in the mailing
list surrounding this package called "contrib/persistent-https: update
ldflags syntax for Go 1.7+". The gmane.org link is:
http://article.gmane.org/gmane.comp.version-control.git/299653/
Signed-off-by: Parker Moore <parkrmoore@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `make all` in `contrib/persistent-https` results in a
failure on Go 1.7 and above.
Specifically, the error is:
go build -o git-remote-persistent-https \
-ldflags "-X main._BUILD_EMBED_LABEL 1468613136"
# _/Users/parkr/github/git/contrib/persistent-https
/usr/local/Cellar/go/1.7rc1/libexec/pkg/tool/darwin_amd64/link: -X
flag requires argument of the form importpath.name=value
make: *** [git-remote-persistent-https] Error 2
This `name=value` syntax for the -X flag was introduced in Go v1.5
(released Aug 19, 2015):
- release notes: https://golang.org/doc/go1.5#link
- commit: 12795c02f3
In Go v1.7, support for the old syntax was removed:
- release notes: https://tip.golang.org/doc/go1.7#compiler
- commit: 51b624e6a2
Add '=' between the symbol and its value for recent versions of Go,
while leaving it out for older ones.
Signed-off-by: Parker Moore <parkrmoore@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
The git-prompt scriptlet (in contrib/) was not friendly with those
who uses "set -u", which has been fixed.
* vs/prompt-avoid-unset-variable:
git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
Coccinelle (http://coccinelle.lip6.fr/) is a program which performs
mechanical transformations on C programs using semantic patches. These
semantic patches can be used to implement automatic refactoring and
maintenance tasks.
Add a set of basic semantic patches to convert common patterns related
to the struct object_id transformation, as well as a README.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script (in contrib/) learned to complete "git
status" options.
* tb/complete-status:
completion: add git status
completion: add __git_get_option_value helper
completion: factor out untracked file modes into a variable
The git-prompt scriptlet (in contrib/) was not friendly with those
who uses "set -u", which has been fixed.
* vs/prompt-avoid-unset-variable:
git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
Helpful if your pkg-config executable has a prefix based on the
architecture, for example.
Signed-off-by: Heiko Becker <heirecka@exherbo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function allows to search the commmand line and config
files for an option, long and short, with mandatory value.
The function would return e.g. for the command line
"git status -uno --untracked-files=all" the result
"all" regardless of the config option.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the shell is in "nounset" or "set -u" mode, referencing unset or
null variables results in an error. Protect $ZSH_VERSION and
$BASH_VERSION against that, and initialize $short_sha before use.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds bare-bone completion support for git-worktree. More advanced
completion (e.g. ref completion in git-worktree-add) can be added later.
--force completion in "worktree add" is left out because that option
should be handled with care.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Stefan Tatschner <rumpelsepp@sevenbyte.org>
Contributions-by: Simon P <simon.git@le-huit.fr>
Contributions-by: Leander Hasty <leander@1stplayable.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion scripts (in contrib/) did not include the
"--cherry-mark" option when completing "git log <HT>".
* mg/complete-cherry-mark-to-log:
completion: complete --cherry-mark for git log
The "split" subcommand of "git subtree" (in contrib/) incorrectly
skipped merges when it shouldn't, which was corrected.
* dw/subtree-split-do-not-drop-merge:
contrib/subtree: fix "subtree split" skipped-merge bug
The "split" subcommand of "git subtree" (in contrib/) incorrectly
skipped merges when it shouldn't, which was corrected.
* dw/subtree-split-do-not-drop-merge:
contrib/subtree: fix "subtree split" skipped-merge bug
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
Add --all and --include-untracked to the git stash save completions.
Add --quiet to the git stash drop completions.
Update git stash branch so that the first argument expands out to the
possible branch names, and the other arguments expand to the stash
names.
Signed-off-by: Paul Wagland <paul@kungfoocoder.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the --no-* variants where those are documented in
git-rebase(1).
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A shell script style update to change `command substitution` into
$(command substitution). Coverts contrib/ and much of the t/
directory contents.
* ep/shell-command-substitution-style: (92 commits)
t9901-git-web--browse.sh: use the $( ... ) construct for command substitution
t9501-gitweb-standalone-http-status.sh: use the $( ... ) construct for command substitution
t9350-fast-export.sh: use the $( ... ) construct for command substitution
t9300-fast-import.sh: use the $( ... ) construct for command substitution
t9150-svk-mergetickets.sh: use the $( ... ) construct for command substitution
t9145-git-svn-master-branch.sh: use the $( ... ) construct for command substitution
t9138-git-svn-authors-prog.sh: use the $( ... ) construct for command substitution
t9137-git-svn-dcommit-clobber-series.sh: use the $( ... ) construct for command substitution
t9132-git-svn-broken-symlink.sh: use the $( ... ) construct for command substitution
t9130-git-svn-authors-file.sh: use the $( ... ) construct for command substitution
t9129-git-svn-i18n-commitencoding.sh: use the $( ... ) construct for command substitution
t9119-git-svn-info.sh: use the $( ... ) construct for command substitution
t9118-git-svn-funky-branch-names.sh: use the $( ... ) construct for command substitution
t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for command substitution
t9110-git-svn-use-svm-props.sh: use the $( ... ) construct for command substitution
t9109-git-svn-multi-glob.sh: use the $( ... ) construct for command substitution
t9108-git-svn-glob.sh: use the $( ... ) construct for command substitution
t9107-git-svn-migrate.sh: use the $( ... ) construct for command substitution
t9105-git-svn-commit-diff.sh: use the $( ... ) construct for command substitution
t9104-git-svn-follow-parent.sh: use the $( ... ) construct for command substitution
...
"git subtree" (in contrib/) records the tag object name in the
commit log message when a subtree is added using a tag, without
peeling it down to the underlying commit. The tag needs to be
peeled when "git subtree split" wants to work on the commit, but
the command forgot to do so.
* rm/subtree-unwrap-tags:
contrib/subtree: unwrap tag refs
'git subtree split' can incorrectly skip a merge even when both parents
act on the subtree, provided the merge results in a tree identical to
one of the parents. Fix by copying the merge if at least one parent is
non-identical, and the non-identical parent is not an ancestor of the
identical parent.
Also, add a test case which checks that a descendant remains a
descendent on the subtree in this case.
Signed-off-by: Dave Ware <davidw@realtimegenomics.com>
Reviewed-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some Makefile dependencies to ensure an updated git-subtree
gets copied to the main area before testing begins.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
