The list of attributes we recognize is a bit unwieldy, as we
actually have two arrays that must be kept in sync. Instead,
let's have a single array-of-struct to represent our
mapping. That means we can never have an accident that
causes us to read off the end of an array, and it makes
diffs for adding new attributes much easier to read.
This also makes it easy to handle the "no" cases without
having to repeat each attribute (this shortens the list,
making it easier to read, but also also cuts the size of our
linear search in half). Technically this makes it impossible
for us to add an attribute that starts with "no" (we could
confuse "nobody" for the negation of "body"), but since this
is a constrained set of attributes, that's OK.
Since we can also store the length of each name in the
struct, that makes it easy for us to avoid reading past the
"len" parameter given to us (though in practice it was not a
bug, since all of our current callers are interested in a
subset of a NUL-terminated buffer, not a true undelimited
range of memory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix function has been very useful for
simplifying pointer arithmetic and avoiding repeated magic
numbers, but we have no equivalent for length-limited
buffers. So we're stuck with:
if (3 <= len && skip_prefix(buf, "foo", &buf))
len -= 3;
That's not that complicated, but it needs to use magic
numbers for the length of the prefix (or else write out
strlen("foo"), repeating the string). By using a helper, we
can get the string length behind the scenes (and often at
compile time for string literals).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a general cleanup of the description of colors in
git-config, mostly to address inaccuracies and confusion
that had grown over time:
- you can have many attributes, not just one
- the discussion flip-flopped between colors and
attributes; now we discuss everything about colors, then
everything about attributes
- many concepts were lumped into the first paragraph,
making it hard to read, and especially to find the
actual lists of colors and attributes. I stopped short
of breaking those out into their own lists, as it seemed
like an excessive use of vertical screen real estate.
- we introduced negated attributes, but then the next
paragraph basically explains how each item starts off
with no attributes. So why would one need negated
attributes? We now explain.
- minor typo, language, and typography fixes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use fixed-size buffers for colors, because we know our
parsing cannot grow beyond a particular bound. However, our
comment description has two issues:
1. It has the description in two forms: a short one, and
one with more explanation. Over time the latter has
been updated, but the former has not. Let's just drop
the short one (after making sure everything it says
is in the long one).
2. As of ff40d18 (parse_color: recognize "no$foo" to clear
the $foo attribute, 2014-11-20), the per-attribute size
bumped to "3" (because "nobold" is actually "21;"). But
that's not quite enough, as somebody may use both
"bold" and "nobold", requiring 5 characters.
This wasn't a problem for the final count, because we
over-estimated in other ways, but let's clarify how we
got to the final number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For repositories without parent following enabled, finding
git parents through svn:mergeinfo or svk::parents can be
expensive and pointless.
Reported-by: Александр Овчинников <proff@proff.email>
http://mid.gmane.org/4094761466408188@web24o.yandex.ru
Signed-off-by: Eric Wong <e@80x24.org>
The "git" command prepends the exec-path to the PATH environment
variable for processes it spawns. That is how ". git-sh-setup" in
our scripted Porcelains can find the dot-sourced file in the
exec-path location that is not usually on user's PATH.
When t2300 runs, because it is not spawned by the "git" command, the
scriptlet being tested did not run with a realistic setting of PATH
environment. It lacked the exec-path on the PATH, and failed to
find the dot-sourced file. A recent update to t2300 attempted to
fix this, with "PATH=$(git --exec-path):$PATH", which has been the
recommended way around v1.6.0 days (a script whose original was
written before that release that survives to this day is likely to
have such a line).
However, the "git --exec-path" command outputs C:\path\to\exec\dir
(not /c/path/to/exec/dir) on Windows; the recent update failed to
consider the problem that comes from it.
Even though Git itself, when doing the equivalent internally, does
so in a platform native way (i.e. on Windows, C:\path\to\exec\dir is
prepended to the existing value of %PATH% using ';' as a component
separator), the result is further massaged by bash and gets turned
into $PATH that uses /c/path/to/exec/dir with ':' separating the
components, which is the form understood by bash, so scripted
Porcelains find commands from PATH correctly.
An end user script written in shell, however, cannot prepend
"C:\path\to\exec\dir:" to the existing value of $PATH and expect
bash to magically turn it into the form it understands. In other
words, "PATH=$(git --exec-path):$PATH" does not work as an emulation
of what "Git" internally does to the PATH on Windows.
To correctly emulate how exec-path is prepended to the PATH
environment internally on Windows, we'd need to convert
C:\git-sdk-64\usr\src\git to at least /c\git-sdk-64\usr\src\git
ourselves before prepending it to PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
p4211 tests line-log performance both with and without "-M".
In v2.9.0, the case without "-M" appears to have regressed
badly, but that is only because we flipped on renames by
default.
Let's have the test explicitly disable renames to get
consistent timings (and to match the presumed intent of the
test, which is to see the effects with and without renames).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7501b59 (perf: make the tests work in worktrees,
2016-05-13) introduced the use of "git rev-parse --git-path"
in the perf-lib setup code. Because the to-be-tested version
of git is at the front of the $PATH when this code runs,
this means we cannot use modern versions of t/perf to test
versions of git older than v2.5.0 (when that option was
introduced).
This is a symptom of a more general problem. The t/perf
suite is essentially independent of git versions, and
ideally we would be able to run the most modern and complete
set of tests across many historical versions (to see how
they compare). But any setup code they run is therefore
required to use the lowest common denominator we expect to
test.
So let's introduce a new variable, $MODERN_GIT, that we can
use both in perf-lib and in the test setup to get a reliable
set of git features (we might change git and break some
tests, of course, but $MODERN_GIT is tied to the same
version of git as the t/perf scripts, so they can be fixed
or adjusted together).
This commit fixes the "--git-path" case, but does not
mass-convert existing setup code to use $MODERN_GIT. Most
setup code is fairly vanilla and will work with effectively
all versions. But now the tool is there to fix any other
issues we find going forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the pretty printing machinery, we should simply ignore
blank lines at the beginning of the commit messages.
This discrepancy was noticed when an early version of the
rebase--helper produced commit objects with more than one empty line
between the header and the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used also in the find_commit_subject()
function.
While at it, rename the function to reflect that it skips not only
empty lines, but any lines consisting of only whitespace, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http://git-htmldocs.googlecode.com/git/git.html says
There was no service found for the uri requested.
Link to the rendered documentation on Jekyll instead.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic here was inverted, you got a message saying the file is
ignored for each file that is not ignored.
Signed-off-by: Andrew Oakley <aoakley@roku.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a subshell for just one git command is both a waste in compute
overhead (create a new process) as well as in line count.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The readlink(1) command is not available on all platforms (notably
not on AIX and HP-UX) and can be replaced in this test with the
"workaround"
ls -ld <name> | sed -e 's/.* -> //'
This is no universal readlink replacement but works in the
controlled test environment well enough.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As this developer has no access to MacOSX developer setups anymore,
Travis becomes the best bet to run performance tests on that OS.
However, on MacOSX /usr/bin/time is that good old BSD executable that
no Linux user cares about, as demonstrated by the perf-lib.sh's use
of GNU-ish extensions. And by the hard-coded path.
Let's just work around this issue by using gtime on MacOSX, the
Homebrew-provided GNU implementation onto which pretty much every
MacOSX power user falls back anyway.
To help other developers use Travis to run performance tests on
MacOSX, the .travis.yml file now sports a commented-out line that
installs GNU time via Homebrew.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know the local timezone offset at a given
timestamp, we compute it by asking for localtime() at the
given time, and comparing the offset to GMT at that time.
However, there's some juggling between time_t and "struct
tm" which happens, which involves calling our own
tm_to_time_t().
If that function returns an error (e.g., because it only
handles dates up to the year 2099), it returns "-1", which
we treat as a time_t, and is clearly bogus, leading to
bizarre timestamps (that seem to always adjust the time back
to (time_t)(uint32_t)-1, in the year 2106).
It's not a good idea for local_tzoffset() to simply die
here; it would make it hard to run "git log" on a repository
with funny timestamps. Instead, let's just treat such cases
as "zero offset".
Reported-by: Norbert Kiesel <nkiesel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ended up testing some of these date formats throughout
the rest of the suite (e.g., via for-each-ref's
"$(authordate:...)" format), but we never did so
systematically. t0006 is the right place for unit-testing of
our date-handling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "show" tests are really only checking relative formats;
we should make that more clear.
This also frees up the "show" name to later check other
formats. We could later fold "relative" into a more generic
"show" command, but it's not worth it. Relative times are a
special case already because we have to munge the concept of
"now" in our tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced developer flags identified a couple of
old-style function declarations in the Windows-specific code where
the parameter list was left empty instead of specifying "void"
explicitly. Let's just fix them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're overwriting a symref with a SHA-1, we need to resolve the value
of the symref (1) to check against update->old_sha1 and (2) to write to
its reflog. However, we've already read the symref itself and know its
referent. So there is no need to read the symref's value through the
symref; we can read the referent directly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To aid the effort, extract a new function, check_old_oid(), and use it
in the two places where the read value of the reference has to be
checked against update->old_sha1.
Update tests to reflect the improvements.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the error messages will be improved in subsequent commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests already set a variable called prefix and passed its value as
the first argument to this function. The old argument handling was
overwriting the global variable with its same value rather than creating
a local variable.
So change test_update_rejected to refer to the global variable rather
than taking the prefix as an argument.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I want to broaden the scope of this test file, so rename it accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow references with reflogs to be iterated over using a ref_iterator.
The latter is implemented as a files_reflog_iterator, which in turn uses
dir_iterator to read the "logs" directory.
Note that reflog iteration doesn't correctly handle per-worktree
reflogs (either before or after this patch).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The iterator interface is modeled on that for references, though no
vtable is necessary because there is (so far?) only one type of
dir_iterator.
There are obviously a lot of features that could easily be added to this
class:
* Skip/include directory paths in the iteration
* Shallow/deep iteration
* Letting the caller decide which subdirectories to recurse into (e.g.,
via a dir_iterator_advance_into() function)
* Option to iterate in sorted order
* Option to iterate over directory paths before vs. after their contents
But these are not needed for the current patch series, so I refrain.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a file under "$GIT_DIR/logs" with no corresponding
reference, the old code was emitting an error message, aborting the
reflog iteration, and returning -1. But
* None of the callers was checking the exit value
* The callers all want to find all legitimate reflogs (sometimes for the
purpose of determining object reachability!) and wouldn't benefit from
a truncated iteration anyway.
So instead, emit an error message and skip the "broken" reflog, but
continue with the iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the reference iterator interface to implement do_for_each_ref().
Delete a bunch of code supporting the old for_each_ref() implementation.
And now that do_for_each_ref() is generic code (it is no longer tied to
the files backend), move it to refs.c.
The implementation is via a new function, do_for_each_ref_iterator(),
which takes a reference iterator as argument and calls a callback
function for each of the references in the iterator.
This change requires the current_ref performance hack for peel_ref() to
be implemented via ref_iterator_peel() rather than peel_entry() because
we don't have a ref_entry handy (it is hidden under three layers:
file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So:
* do_for_each_ref_iterator() records the active iterator in
current_ref_iter while it is running.
* peel_ref() checks whether current_ref_iter is pointing at the
requested reference. If so, it asks the iterator to peel the
reference (which it can do efficiently via its "peel" virtual
function). For extra safety, we do the optimization only if the
refname *addresses* are the same, not only if the refname *strings*
are the same, to forestall possible mixups between refnames that come
from different ref_iterators.
Please note that this optimization of peel_ref() is only available when
iterating via do_for_each_ref_iterator() (including all of the
for_each_ref() functions, which call it indirectly). It would be
complicated to implement a similar optimization when iterating directly
using a reference iterator, because multiple reference iterators can be
in use at the same time, with interleaved calls to
ref_iterator_advance(). (In fact we do exactly that in
merge_ref_iterator.)
But that is not necessary. peel_ref() is only called while iterating
over references. Callers who iterate using the for_each_ref() functions
benefit from the optimization described above. Callers who iterate using
reference iterators directly have access to the ref_iterator, so they
can call ref_iterator_peel() themselves to get an analogous optimization
in a more straightforward manner.
If we rewrite all callers to use the reference iteration API, then we
can remove the current_ref_iter hack permanently.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the API for iterating over references is via a family of
for_each_ref()-type functions that invoke a callback function for each
selected reference. All of these eventually call do_for_each_ref(),
which knows how to do one thing: iterate in parallel through two
ref_caches, one for loose and one for packed refs, giving loose
references precedence over packed refs. This is rather complicated code,
and is quite specialized to the files backend. It also requires callers
to encapsulate their work into a callback function, which often means
that they have to define and use a "cb_data" struct to manage their
context.
The current design is already bursting at the seams, and will become
even more awkward in the upcoming world of multiple reference storage
backends:
* Per-worktree vs. shared references are currently handled via a kludge
in git_path() rather than iterating over each part of the reference
namespace separately and merging the results. This kludge will cease
to work when we have multiple reference storage backends.
* The current scheme is inflexible. What if we sometimes want to bypass
the ref_cache, or use it only for packed or only for loose refs? What
if we want to store symbolic refs in one type of storage backend and
non-symbolic ones in another?
In the future, each reference backend will need to define its own way of
iterating over references. The crux of the problem with the current
design is that it is impossible to compose for_each_ref()-style
iterations, because the flow of control is owned by the for_each_ref()
function. There is nothing that a caller can do but iterate through all
references in a single burst, so there is no way for it to interleave
references from multiple backends and present the result to the rest of
the world as a single compound backend.
This commit introduces a new iteration primitive for references: a
ref_iterator. A ref_iterator is a polymorphic object that a reference
storage backend can be asked to instantiate. There are three functions
that can be applied to a ref_iterator:
* ref_iterator_advance(): move to the next reference in the iteration
* ref_iterator_abort(): end the iteration before it is exhausted
* ref_iterator_peel(): peel the reference currently being looked at
Iterating using a ref_iterator leaves the flow of control in the hands
of the caller, which means that ref_iterators from multiple
sources (e.g., loose and packed refs) can be composed and presented to
the world as a single compound ref_iterator.
It also means that the backend code for implementing reference iteration
will sometimes be more complicated. For example, the
cache_ref_iterator (which iterates over a ref_cache) can't use the C
stack to recurse; instead, it must manage its own stack internally as
explicit data structures. There is also a lot of boilerplate connected
with object-oriented programming in C.
Eventually, end-user callers will be able to be written in a more
natural way—managing their own flow of control rather than having to
work via callbacks. Since there will only be a few reference backends
but there are many consumers of this API, this is a good tradeoff.
More importantly, we gain composability, and especially the possibility
of writing interchangeable parts that can work with any ref_iterator.
For example, merge_ref_iterator implements a generic way of merging the
contents of any two ref_iterators. It is used to merge loose + packed
refs as part of the implementation of the files_ref_iterator. But it
will also be possible to use it to merge other pairs of reference
sources (e.g., per-worktree vs. shared refs).
Another example is prefix_ref_iterator, which can be used to trim a
prefix off the front of reference names before presenting them to the
caller (e.g., "refs/heads/master" -> "master").
In this patch, we introduce the iterator abstraction and many utilities,
and implement a reference iterator for the files ref storage backend.
(I've written several other obvious utilities, for example a generic way
to filter references being iterated over. These will probably be useful
in the future. But they are not needed for this patch series, so I am
not including them at this time.)
In a moment we will rewrite do_for_each_ref() to work via reference
iterators (allowing some special-purpose code to be discarded), and do
something similar for reflogs. In future patch series, we will expose
the ref_iterator abstraction in the public refs API so that callers can
use it directly.
Implementation note: I tried abstracting this a layer further to allow
generic iterators (over arbitrary types of objects) and generic
utilities like a generic merge_iterator. But the implementation in C was
very cumbersome, involving (in my opinion) too much boilerplate and too
much unsafe casting, some of which would have had to be done on the
caller side. However, I did put a few iterator-related constants in a
top-level header file, iterator.h, as they will be useful in a moment to
implement iteration over directory trees and possibly other types of
iterators in the future.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract new function ref_resolves_to_object() from
entry_resolves_to_object(). It can be used even if there is no ref_entry
at hand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free up the old name for a more general purpose.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is not a nonbare repository where a submodule is supposedly
located, then don't instantiate a ref_cache for it.
The analogous check can be removed from resolve_gitlink_ref().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the modern world of reference backends, it is not OK to delete a
symref by unlink()ing the file directly. This must be done via the refs
API.
We do so by adding the symref to the list of references to delete along
with the non-symbolic references, then calling delete_refs() with the
new flags option set to REF_NODEREF.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be useful for passing REF_NODEREF through.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the context of the for_each_ref() functions, call the prefix that
references must start with "prefix". (In some places it was called
"base".) This is clearer, and also prevents confusion with another
planned use of the word "base".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
We usually call a function that clears the contents a data
structure X without freeing the structure itself clear_X(), and
call a function that does clear_X() and also frees it free_X().
free_pathspec() function has been renamed to clear_pathspec()
to avoid confusion.
* jc/clear-pathspec:
pathspec: rename free_pathspec() to clear_pathspec()
"git worktree add" learned that '-' can be used as a short-hand for
"@{-1}", the previous branch.
* jg/dash-is-last-branch-in-worktree-add:
worktree: allow "-" short-hand for @{-1} in add command
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
An upstream project can make a recommendation to shallowly clone
some submodules in the .gitmodules file it ships.
* sb/submodule-recommend-shallowness:
submodule update: learn `--[no-]recommend-shallow` option
submodule-config: keep shallow recommendation around
When "git daemon" is run without --[init-]timeout specified, a
connection from a client that silently goes offline can hang around
for a long time, wasting resources. The socket-level KEEPALIVE has
been enabled to allow the OS to notice such failed connections.
* ew/daemon-socket-keepalive:
daemon: enable SO_KEEPALIVE for all sockets
