I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).
The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determine_author_info() returns to the calling prepare_to_commit(),
we already know the pieces of information necessary to determine what
author ident will be used in the final message, but deferred making a call
to fmt_ident() before the final commit_tree(). Most importantly, we would
open the editor to ask the user to compose the log message before it.
As one important side effect of fmt_ident() is to error out when the given
information is malformed, this resulted in us spawning the editor first
and then refusing to commit due to error, even though we had enough
information to detect the error before starting the editor, which was
annoying.
Move the fmt_ident() call to the end of determine_author_info() where we
have final determination of author info to rectify this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
* jn/parse-options-extra:
update-index: migrate to parse-options API
setup: save prefix (original cwd relative to toplevel) in startup_info
parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION
parse-options: allow git commands to invent new option types
parse-options: never suppress arghelp if LITERAL_ARGHELP is set
parse-options: do not infer PARSE_OPT_NOARG from option type
parse-options: sanity check PARSE_OPT_NOARG flag
parse-options: move NODASH sanity checks to parse_options_check
parse-options: clearer reporting of API misuse
parse-options: Don't call parse_options_check() so much
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that struct commit.util is not used until after we've checked that
the argument doesn't exactly match a tag, we can wait until then to
look up the commits for each tag.
This avoids a lot of I/O on --exact-match queries in repositories with
many tags. For example, 'git describe --exact-match HEAD' becomes
about 12 times faster on a cold cache (3.2s instead of 39s) in a
linux-2.6 repository with 2000 packed tags. That is a huge win for the
interactivity of the __git_ps1 shell prompt helper when on a detached
HEAD.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
describe is currently forced to look up the commit at each tag in
order to store the struct commit_name pointers in struct commit.util.
For --exact-match queries, those lookups are wasteful. In preparation
for removing them, put the commit_names into a hash table, indexed by
commit SHA1, that can be used to quickly check for exact matches.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now add_to_known_names overwrites commit_names in place when multiple
tags point to the same commit. This will make it easier to store
commit_names in a hash table.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't waste time checking for dangling refs; they wouldn't affect the
output of 'git describe' anyway. Although this does not gain much
performance by itself, it does in conjunction with the next commits.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
--refresh and --really-refresh accept flags (like -q) and modify
an error indicator. It might make sense to make the error
indicator global, but just pass the flags and a pointer to the error
indicator in a struct instead.
--cacheinfo wants 3 arguments. Use the OPTION_LOWLEVEL_CALLBACK
extension to grab them and PARSE_OPT_NOARG to disallow the "sticked"
--cacheinfo=foo form. (The resulting message
$ git update-index --cacheinfo=foo
error: option `cacheinfo' takes no value
is unfortunately incorrect.)
--assume-unchanged and --no-assume-unchanged probably should use the
OPT_UYN feature; but use a callback for now so the existing MARK_FLAG
and UNMARK_FLAG values can be used.
--stdin and --index-info are still constrained to be the last argument
(implemented using the OPTION_LOWLEVEL_CALLBACK extension).
--unresolve and --again consume all arguments that come after them
(also using OPTION_LOWLEVEL_CALLBACK).
The order of options matters. Each path on the command line is
affected only by the options that come before it. A custom
argument-parsing loop with parse_options_step() brings that about.
In exchange for all the fuss, we get the usual perks: support for
un-sticked options, better usage error messages, more useful -h
output, and argument parsing code that should be easier to tweak
in the future.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_options_check() is being called for each invocation of
parse_options_step which can be quite a bit for some commands. The
commit introducing this function cb9d398 (parse-options: add
parse_options_check to validate option specs., 2009-06-09) had the
correct motivation and explicitly states that parse_options_check()
should be called from parse_options_start(). However, the implementation
differs from the motivation. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
* sn/diff-doc:
docs: clarify git diff modes of operation
diff,difftool: Don't use the {0,2} notation in usage strings
CodingGuidelines: Add a section on writing documentation
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
