parse_commit_header() provides the commit encoding for '%e' and it
reads it from the re-encoded message, which contains the new encoding,
not the original one in the commit object. This never happens because
--pretty=format:xxx never respects i18n.logoutputencoding. But that's
a different story.
Get the commit encoding from logmsg_reencode() instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit encoding is parsed by logmsg_reencode, there's no need for
the caller to re-parse it again. The reencoded message now has the new
encoding, not the original one. The caller would need to read commit
object again before parsing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Centralize the parsing of the date and time zone strings in the new
helper function show_ident_date() and make sure it checks the pointers
provided by split_ident_line() for NULL before use.
Reported-by: Ivan Lyapunov <dront78@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verification of signed tags were not done correctly when not in C
or en/US locale.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in the
middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
Expand %G? in pretty format strings to 'N' in case of no GPG signature
and 'U' in case of a good but untrusted GPG signature in addition to
the previous 'G'ood and 'B'ad. This eases writing anyting parsing
git-log output.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
Call "gpg" using the right API when validating the signature on
tags.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
Even though an earlier attempt (bafc478..41dd00bad) cleaned
up RFC 2047 encoding, pretty.c::add_rfc2047() still decides
where to split the output line by going through the input
one byte at a time, and potentially splits a character in
the middle. A subject line may end up showing like this:
".... fö?? bar". (instead of ".... föö bar".)
if split incorrectly.
RFC 2047, section 5 (3) explicitly forbids such beaviour
Each 'encoded-word' MUST represent an integral number of
characters. A multi-octet character may not be split across
adjacent 'encoded- word's.
that means that e.g. for
Subject: .... föö bar
encoding
Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?=
=?UTF-8?q?=20bar?=
is correct, and
Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here
=?UTF-8?q?=B6=20bar?=
is not, because "ö" character UTF-8 encoding C3 B6 is split here across
adjacent encoded words.
To fix the problem, make the loop grab one _character_ at a time and
determine its output length to see where to break the output line. Note
that this version only knows about UTF-8, but the logic to grab one
character is abstracted out in mbs_chrlen() function to make it possible
to extend it to other encodings with the help of iconv in the future.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to employ signed keys in an automated way it is absolutely
necessary to check which keys the signatures come from.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, parse_signature_lines() parses the gpg output for strings
which depend on LANG so it fails to recognize good commit signatures
(and thus does not fill in %G? and the like) in most locales.
Make it parse the status lines from gpg instead, which are the proper
machine interface. This fixes the problem described above.
There is a change in behavior for "%GS" which we intentionally do not
work around: "%GS" used to put quotes around the signer's uid (or
rather: it inherited from the gpg user output). We output the uid
without quotes now, just like author and committer names.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, verify_signed_buffer() returns the user facing output only.
Allow callers to request the status output also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually a commit that makes it to logmsg_reencode will have
been parsed, and the commit->buffer struct member will be
valid. However, some code paths will free commit buffers
after having used them (for example, the log traversal
machinery will do so to keep memory usage down).
Most of the time this is fine; log should only show a commit
once, and then exits. However, there are some code paths
where this does not work. At least two are known:
1. A commit may be shown as part of a regular ref, and
then it may be shown again as part of a submodule diff
(e.g., if a repo contains refs to both the superproject
and subproject).
2. A notes-cache commit may be shown during "log --all",
and then later used to access a textconv cache during a
diff.
Lazily loading in logmsg_reencode does not necessarily catch
all such cases, but it should catch most of them. Users of
the commit buffer tend to be either parsing for structure
(in which they will call parse_commit, and either we will
already have parsed, or we will load commit->buffer lazily
there), or outputting (either to the user, or fetching a
part of the commit message via format_commit_message). In
the latter case, we should always be using logmsg_reencode
anyway (and typically we do so via the pretty-print
machinery).
If there are any cases that this misses, we can fix them up
to use logmsg_reencode (or handle them on a case-by-case
basis if that is inappropriate).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logmsg_reencode function will return the reencoded
commit buffer, or NULL if reencoding failed or no reencoding
was necessary. Since every caller then ends up checking for NULL
and just using the commit's original buffer, anyway, we can
be a bit more helpful and just return that buffer when we
would have returned NULL.
Since the resulting string may or may not need to be freed,
we introduce a logmsg_free, which checks whether the buffer
came from the commit object or not (callers either
implemented the same check already, or kept two separate
pointers, one to mark the buffer to be used, and one for the
to-be-freed string).
Pushing this logic into logmsg_* simplifies the callers, and
will let future patches lazily load the commit buffer in a
single place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
This conversion avoids the need for magic string length numbers in the
code. And unlike memcmp(), prefixcmp() is careful to not run over the
end of a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the mailmap information to display the rewritten
username and email address in all log commands.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify map_user(), mostly to avoid copies of string buffers. It
also simplifies caller functions.
map_user() directly receive pointers and length from the commit buffer
as mail and name. If mapping of the user and mail can be done, the
pointer is updated to a new location. Lengths are also updated if
necessary.
The caller of map_user() can then copy the new email and name if
necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently blame.c::get_acline(), pretty.c::pp_user_info() and
shortlog.c::insert_one_record() are parsing author name, email, time
and tz themselves.
Use ident.c::split_ident_line() for better code reuse.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce "log --format=%C(auto,blue)Foo%C(auto,reset)" that does
not color its output when writing to a non-terminal.
* jc/format-color-auto:
log --format: teach %C(auto,black) to respect color config
t6006: clean up whitespace
Finishing touches to the series to unify "Do we need to reencode
between these two encodings?" logic.
* jc/same-encoding:
format_commit_message(): simplify calls to logmsg_reencode()
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other callers of logmsg_reencode() pass return value of
get_commit_output_encoding() or get_log_output_encoding(). Teach
the function to optionally take NULL as a synonym to "" aka "no
conversion requested" so that we can simplify the only remaining
calling site.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Conflicts:
builtin/mailinfo.c
Callers of reencode_string() that re-encodes a string from one
encoding to another all used ad-hoc way to bypass the case where the
input and the output encodings are the same. Some did strcmp(),
some did strcasecmp(), yet some others when converting to UTF-8 used
is_encoding_utf8().
Introduce same_encoding() helper function to make these callers use
the same logic. Notably, is_encoding_utf8() has a work-around for
common misconfiguration to use "utf8" to name UTF-8 encoding, which
does not match "UTF-8" hence strcasecmp() would not consider the
same. Make use of it in this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC 2047 and RFC 822, rfc2047 encoded words and and rfc822
quoted strings do not mix. Since add_rfc2047() no longer leaves RFC 822
specials behind, the quoting is also no longer necessary to create a
standard-conforming mail.
Remove the quoting, when RFC 2047 encoding takes place. This actually
requires to refactor add_rfc2047() a bit, so that the different cases
can be distinguished.
With this patch, my own name gets correctly decoded as Jan H. Schönherr
(without quotes) and not as "Jan H. Schönherr" (with quotes).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2047 requires more characters to be encoded than it is currently done.
Especially, RFC 2047 distinguishes between allowed remaining characters
in encoded words in addresses (From, To, etc.) and other headers, such
as Subject.
Make add_rfc2047() and is_rfc2047_special() location dependent and include
all non-allowed characters to hopefully be RFC 2047 conformant.
This especially fixes a problem, where RFC 822 specials (e. g. ".") were
left unencoded in addresses, which was solved with a non-standard-conforming
workaround in the past (which is going to be removed in a follow-up patch).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, an open-coded loop to calculate the length of the last
line of a string buffer is used in multiple places.
Move that code into a function of its own.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encoded characters add more than one character at once to an encoded
header. Include all characters that are about to be added in the length
calculation for wrapping.
Additionally, RFC 2047 imposes a maximum line length of 76 characters
if that line contains an rfc2047 encoded word.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not wrap the second and later lines of non-rfc2047-encoded headers
substantially before the 78 character limit.
Instead of passing the remaining length of the first line as wrapping
width, use the correct maximum length and tell strbuf_add_wrapped_bytes()
how many characters of the first line are already used.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only case pretty_print_commit() appends notes message to the log
message taken from the commit is when show_log() calls it with the
notes_message field set, and the output format is not the userformat
(i.e. when substituting "%N"). No other users of this function sets
this field in the pretty_print_context, as can be easily verified in
the previous step.
Hoist the code to append the notes message to the caller.
Up to this point, no functionality change is intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing a boolean show_notes around, pass an optional
string that is to be inserted after the log message proper is shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We either stuff the notes message without modification for %N
userformat, or format it for human consumption. Using two bits
is an overkill that does not benefit anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has only two callsites, and is a thin wrapper whose
usefulness is dubious. When the caller needs to learn the log
output encoding, it should be able to do so by directly calling
get_log_output_encoding() and calling the underlying
logmsg_reencode() with it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit object has a header line at the end of the
buffer that is missing its newline (or if it appears so
because the content on the header line contains a stray
NUL), then git will segfault.
Interestingly, this case is explicitly handled and we do
correctly scan the final line for the header we are looking
for. But if we don't find it, we will dereference NULL while
trying to look at the next line.
Git will never generate such a commit, but it's good to be
defensive. We could die() in such a case, but since it's
easy enough to handle it gracefully, let's just issue a
warning and continue (so you could still view such a commit
with "git show", though you might be missing headers after
the NUL).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse the name and email from a commit to
pretty-print them, we usually can just put the result
directly into our strbuf result. However, if we are going to
use the mailmap, then we must first copy them into a
NUL-terminated buffer to feed to the mailmap machinery.
We did so by using strlcpy into a static buffer, but we used
it wrong. We fed it the length of the substring we wanted to
copy, but never checked that that length was less than the
size of the destination buffer.
The simplest fix is to just use snprintf to copy the
substring properly while still respecting the destination
buffer's size. It might seem like replacing the static
buffer with a strbuf would help, but we need to feed a
static buffer to the mailmap machinery anyway, so there's
not much benefit to handling arbitrary sizes.
A more ideal solution would be for mailmap to grow an
interface that:
1. Takes a pointer and length combination, instead of
assuming a NUL-terminated string.
2. Returns a pointer to the mailmap's allocated string,
rather than copying it into the buffer.
Then we could avoid the need for an extra buffer entirely.
However, doing this would involve a lot of refactoring of
mailmap and of string_list (which mailmap uses to store the
map itself). For now, let's do the simplest thing to fix the
bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit formatting logic format_person_part() in pretty.c
implements the logic to split an author/committer ident line into
its parts, intermixed with logic to compute its output using these
piece it computes.
Separate the former out to a helper function split_ident_line() so
that other codepath can use the same logic, and rewrite the function
using the helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
When doing a reflog walk, you can get some information about
the reflog (such as the subject line), but not the identity
information (i.e., name and email).
Let's make those available, mimicing the options for author
and committer identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new placeholders related to the GPG signature on signed commits.
- %GG to show the raw verification message from GPG;
- %G? to show either "G" for Good, "B" for Bad;
- %GS to show the name of the signer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was introduced in 5b16360 (pretty: Initialize notes if %N is
used, 2010-04-13) to check what kind of information the "log --format=..."
user format string wants. The function can be passed a NULL instead of a
format string to ask it to check user_format variable kept by an earlier
call to save_user_format().
But it unconditionally checked user_format and not the string it was
given. The only caller introduced by the change passes NULL, which
kept the bug unnoticed, until a new GCC noticed that there is an
assignment to fmt that is never used.
Noticed-by: Chris Wilson's compiler
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
If somebody has a name that includes an rfc822 special, we
will output it literally in the "From:" header. This is
usually OK, but certain characters (like ".") are supposed
to be enclosed in double-quotes in a mail header.
In practice, whether this matters may depend on your MUA.
Some MUAs will happily take in:
From: Foo B. Bar <author@example.com>
without quotes, and properly quote the "." when they send
the actual mail. Others may not, or may screw up harder
things like:
From: Foo "The Baz" Bar <author@example.com>
For example, mutt will strip the quotes, thinking they are
actual syntactic rfc822 quotes.
So let's quote properly, and then (if necessary) we still
apply rfc2047 encoding on top of that, which should make all
MUAs happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already wrap names in "from" headers, which tend to be
the long part of an address. But it's also possible for a
long name to not be wrapped, but to make us want to wrap the
email address. For example (imagine for the sake of
readability we want to wrap at 50 characters instead of 78):
From: this is my really long git name <foo@example.com>
The name does not overflow the line, but the name and email
together do. So we would rather see:
From: this is my really long git name
<git@example.com>
Because we wrap the name separately during add_rfc2047, we
neglected this case. Instead, we should see how long the
final line of the wrapped name ended up, and decide whether
or not to wrap based on that. We can't break the address
into multiple parts, so we either leave it with the name, or
put it by itself on a line.
Test by Erik Faye-Lund.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These should generally never happen, as we already
concatenate multiples in subjects into a single line. But
let's be defensive, since not encoding them means we will
output malformed headers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subject and identity headers may be arbitrarily long. In the
past, we just assumed that single-line headers would be
reasonably short. For multi-line subjects that we squish
into a single line, we just "pre-folded" the data in
pp_title_line by adding a newline and indentation.
There were two problems. One is that, although rare,
single-line messages can actually be longer than the
recommended line-length limits. The second is that the
pre-folding interacted badly with rfc2047 encoding, leading
to malformed headers.
Instead, let's stop pre-folding the subject lines, and just
fold everything based on length in add_rfc2047, whether
it is encoded or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_commit_message() will now reencode the content if the desired
output encoding is different from the encoding in the passed in
commit. Callers wanting to specify the output encoding do so via the
pretty_print_context struct.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin/commit.c: Replace block of code with a one-liner call to
logmsg_reencode().
* commit.c: new function for looking up a comit by name
* pretty.c: helper methods for getting output encodings
Add helpers get_log_output_encoding() and
get_commit_output_encoding() that eliminate some messy and duplicate
if-blocks.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
We have the '+' modifiier which helps combine format specifiers which
may possibly be empty, e.g. '%s%+b%n'.
Introduce an analogous ' ' (space) modifier which adds a space before
non-empty items. This helps assemble "one line type" format specifiers.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wp/pretty-enhancement:
pretty: initialize new cmt_fmt_map to 0
pretty: add aliases for pretty formats
pretty: add infrastructure for commit format aliases
pretty: make it easier to add new formats
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
Without this change, is_alias is likely to happen to be nonzero,
resulting in "fatal: invalid --pretty format" when the fake alias
cannot be resolved.
Use memset instead of initializing the members one by one to make it
easier to expand the struct in the future if needed.
t4205 (log --pretty) does not pass for me without this fix.
Cc: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to this, the output of git log -1 --format=%h was always 7
characters long, without regard to whether --abbrev had been passed.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
previously the only ways to alias a --pretty format within git were
either to set the format as your default format (via the format.pretty
configuration variable), or by using a regular git alias. This left the
definition of more complicated formats to the realm of "builtin or
nothing", with user-defined formats usually being reserved for quick
one-offs.
Here we allow user-defined formats to enjoy more or less the same
benefits of builtins. By defining pretty.myalias, "myalias" can be
used in place of whatever would normally come after --pretty=. This
can be a format:, tformat:, raw (ie, defaulting to tformat), or the name
of another builtin or user-defined pretty format.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow named commit formats to alias one another; find_commit_format() will
recursively dereference aliases when they are specified. At this point,
there are no aliases specified and there is no way to specify an alias,
but the support is there for any which are added.
If an alias loop is detected, the function die()s.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the first step towards creating aliases, we make it easier to add new
formats to the list of builtin formats. To do this, we move the
initialization of the formats array into a new function,
setup_commit_formats(), which we can easily extend later. Then, rather
than looping through only the list of known formats, we make a more
generic find_commit_format function, which will return the commit format
whose name is the shortest which is prefixed with the passed-in sought
format, the same rules which were more-or-less hard-coded in before.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git log --pretty='%N' without an explicit --show-notes, git
would segfault. This patches fixes this behaviour by loading the needed
notes datastructures if --pretty is used and the format contains %N.
When --pretty='%N' is used together with --no-notes, %N won't be
expanded.
This is an extension to a proposed patch by Jeff King.
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new struct notes_tree encapsulates access to a specific notes tree.
It is provided to allow callers to make use of several different notes trees
simultaneously.
A struct notes_tree * parameter is added to every function in the notes API.
In all cases, NULL can be passed, in which case the fallback "default" notes
tree (default_notes_tree) is used.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is really no reason why only commit objects can be annotated. By
changing the struct commit parameter to get_commit_notes() into a sha1 we
gain the ability to annotate any object type. To reflect this in the function
naming as well, we rename get_commit_notes() to format_note().
This patch also fixes comments and variable names throughout notes.c as a
consequence of the removal of the unnecessary 'commit' restriction.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* rs/pretty-wrap:
log --format: don't ignore %w() at the start of format string
Implement wrap format %w() as if it is a mode switch
Conflicts:
pretty.c
I always considered line wrapping to be more similar to a colour, i.e. a
state that one can change and that is applied to all following text until
the next state change, except that it's always reset at the end of the
format string.
Here's a patch to implement this behaviour, using Dscho's
strbuf_add_wrapped_text()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty_print_commit() has a bunch of rarely-used arguments, and
introducing more of them requires yet another update of all the call
sites. Refactor most of them into a struct to make future extensions
easier.
The ones that stay "plain" arguments were chosen on the grounds that
all callers put real arguments there, whereas some callers have 0/NULL
for all arguments that were factored into the struct.
We declare the struct 'const' to ensure none of the callers are bitten
by the changed (no longer call-by-value) semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the following flags to get_commit_notes() for adjusting the
format of the produced note string:
- NOTES_SHOW_HEADER: Print "Notes:" line before the notes contents
- NOTES_INDENT: Indent notes contents by 4 spaces
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
The format template string was declared as "const void *" for some unknown
reason, even though it obviously is meant to be passed a string. Make it
"const char *".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful outside of log-tree.c, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms (Solaris 7, IRIX 6.5) do not understand 'utf-8', but
all tested implementations understand 'UTF-8'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the subject line is '...' the strbuf will be accessed before the
first dot is added; potentially changing the strbuf passed into the
function or accessing sb->buf[-1] if it was originally empty.
Reported-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This specifier represents the sanitized and filename friendly subject
line of a commit. No checks are made against the length of the string,
so users may need to trim the result to the desired length if using as a
filename. This is commonly used by format-patch to massage commit
subjects into filenames and output patches to files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were always overwritten or the assigned
value was unused:
builtin-diff-tree.c::cmd_diff_tree(): nr_sha1
builtin-for-each-ref.c::opt_parse_sort(): sort_tail
builtin-mailinfo.c::decode_header_bq(): in
builtin-shortlog.c::insert_one_record(): len
connect.c::git_connect(): path
imap-send.c::v_issue_imap_cmd(): n
pretty.c::pp_user_info(): filler
remote::parse_refspec_internal(): llen
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
Add a standard definition of isascii() and use it to replace an open
coded high-bit test in pretty.c. While we're there, write the ESC
char as the more commonly used '\033' instead of as 0x1b to enhance
its grepability.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
Allow --pretty="%h %s" (and --format="%h %s") as shorthand for an often
used option --pretty=tformat:"%h %s".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
Remove the literal ANSI escape sequences and replace them by readable
constants.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message parser of git shortlog used to treat only the first
non-empty line of the commit message as the subject. Other log commands
(e.g. --pretty=oneline) show the whole first paragraph instead (unwrapped
into a single line).
For consistency, this patch borrows format_subject() from pretty.c to
make shortlog do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log --pretty=format:%s (and tformat:) used to display the first
line of the subject, unlike the other --pretty options, which would
construct a subject line from all lines of the first paragraph of
the commit message.
For consistency and increased code reuse, change format: to do the
same as the other options.
Before:
$ git log --pretty=oneline v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
$ git log --pretty=tformat:"%H %s" v1.6.1 | md5sum
298903b1c065002e15daa5329213c51f -
After:
$ git log --pretty=tformat:"%H %s" v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
$ git log --pretty=oneline v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch will use it.
In the version that was factored out, we can't rely on the len of the
struct strbuf to find out if a line separator needs to be added, as
it might already contain something. Add a guard variable ("first")
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-blame outputs text from the commit messages
(e.g. the author name and the summary string) as-is, without
even providing any information about the encoding used for
the data. It makes interpreting the data in multilingual
environment very difficult.
This commit changes the blame implementation to recode the
messages using the rules used by other commands like git-log.
Namely, the target encoding can be specified through the
i18n.commitEncoding or i18n.logOutputEncoding options, or
directly on the command line using the --encoding parameter.
Converting the encoding before output seems to be more
friendly to the porcelain tools than simply providing the
value of the encoding header, and does not require changing
the output format.
If anybody needs the old behavior, it is possible to
achieve it by specifying --encoding=none.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a new format placeholder, %d, which expands to a ref name decoration
(think git log --decorate). It expands to an empty string if the commit
has no decoration, or otherwise to a comma (and space) separated list of
decorations, surrounded by parentheses and a leading space.
Michael Dressel implemented an initial version and chose the letter d,
Junio suggested to add a leading space and parentheses.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command like:
git log --pretty=format:%ad --date=short
the date option was ignored. This patch causes it to use whatever
format was specified by --date (or by --relative-date, etc), just
as the non-user formats would do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty format %an does not respect .mailmap, but gives the exact
author name recorded in the commit. Sometimes it is more desirable,
however, to look if the email has another name mapped to it in .mailmap.
This commit adds %aN (and %cN for the committer name) to do exactly that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attached patch introduces a single bit "use_terminator" in "struct
rev_info", which is normally false (i.e. most formats use separator
semantics) but by flipping it to true, you can ask for terminator
semantics just like oneline format does.
The function get_commit_format(), which is what parses "--pretty=" option,
now takes a pointer to "struct rev_info" and updates its commit_format and
use_terminator fields. It used to return the value of type "enum
cmit_fmt", but all the callers assigned it to rev->commit_format.
There are only two cases the code turns use_terminator on. Obviously, the
traditional oneline format (--pretty=oneline) is one of them, and the new
case is --pretty=tformat:... that acts like --pretty=format:... but flips
the bit on.
With this, "--pretty=tformat:%H %s" acts like --pretty=oneline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a %xXX format which inserts two hexdigits after %x as a byte
value in the resulting string. This can be used to add a NUL byte or any
other byte that can make machine parsing easier. It is also necessary to
use fwrite to print out the data since printf will terminate if you feed
it a NUL.
Signed-off-by: Govind Salinas <blix@sophiasuchtig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the callchain from pretty_print_commit() down to pp_title_line()
had an unwarranted assumption that the presense of "after_subject"
parameter, means the caller has already output MIME headers for
attachments. The parameter's primary purpose is to give extra header
lines the caller wants to place after pp_title_line() generates the
"Subject: " line.
This assumption does not hold when the user used the format.header
configuration variable to pass extra headers, and caused a message with
non-ASCII character to lack proper MIME headers (e.g. 8-bit CTE header).
The earlier logic also failed to suppress duplicated MIME headers when
"format-patch -s --attach" is asked for and the signer's name demanded
8-bit clean transport.
This patch fixes the logic by introducing a separate need_8bit_cte
parameter passed down the callchain. This can have one of these values:
-1 : we've already done MIME crap and we do not want to add extra header
to say this is 8bit in pp_title_line();
0 : we haven't done MIME and we have not seen anything that is 8bit yet;
1 : we haven't done MIME and we have seen something that is 8bit;
pp_title_line() must add MIME header.
It adds two tests by Jeff King who independently diagnosed this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/cover-letter:
Improve collection of information for format-patch --cover-letter
Add API access to shortlog
t4014: Replace sed's non-standard 'Q' by standard 'q'
Support a --cc=<email> option in format-patch
Combine To: and Cc: headers
Fix format.headers not ending with a newline
Add tests for extra headers in format-patch
Add a --cover-letter option to format-patch
Export some email and pretty-printing functions
Improve message-id generation flow control for format-patch
Add more tests for format-patch
Conflicts:
builtin-log.c
builtin-shortlog.c
pretty.c
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These will be used for generating the cover letter in addition to the
patch emails.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --pretty=format prefix is looked up in a
tight loop in strbuf_expand(), if prefix is found it is then
used as argument for format_commit_item() that does another
search by a switch statement to select the proper operation.
Because the switch statement is already able to discard
unknown matches we don't need the prefix lookup before
to call format_commit_item().
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When e-mail address is empty (e.g. "A U Thor <>"), --pretty=format
misparsed the commit header and did not pick up the date field correctly.
Noticed by Marco, fixed slightly differently with additional sanity
check and with a test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit message that does not have a terminating LF is
read in and the memory that was allocated to read it happens to
have a LF immediately after that, the code was not careful and
went past the terminating NUL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Jeff King remarked, format strings with duplicate placeholders can
be slow to expand, because each instance is calculated anew.
This patch makes use of the fact that format_commit_message() and its
helper functions only ever add stuff to the end of the strbuf. For
certain expensive placeholders, store the offset and length of their
expansion with the strbuf at the first occurrence. Later they
expansion result can simply be copied from there -- no malloc() or
strdup() required.
These certain placeholders are the abbreviated commit, tree and
parent hashes, as the search for a unique abbreviated hash is quite
costly. Here are the times for next (best of three runs):
$ time git log --pretty=format:%h >/dev/null
real 0m0.611s
user 0m0.404s
sys 0m0.204s
$ time git log --pretty=format:%h%h%h%h >/dev/null
real 0m1.206s
user 0m0.744s
sys 0m0.452s
And here those with this patch (and the previous two); the speedup
of the single placeholder case is just noise:
$ time git log --pretty=format:%h >/dev/null
real 0m0.608s
user 0m0.416s
sys 0m0.192s
$ time git log --pretty=format:%h%h%h%h >/dev/null
real 0m0.639s
user 0m0.488s
sys 0m0.140s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Jeff King pointed out, some placeholder expansions are related to
each other: the steps to calculate one go most of the way towards
calculating the other, too.
This patch makes format_commit_message() parse the commit message
only once, remembering the position of each item. This speeds up
handling of format strings containing multiple placeholders from the
set %s, %a*, %c*, %e, %b.
Here are the timings for the git version in next. The first one is
to estimate the overhead of the caching, the second one is taken
from http://svn.tue.mpg.de/tentakel/trunk/tentakel/Makefile as an
example of a format string found in the wild. The times are the
fastest of three consecutive runs in each case:
$ time git log --pretty=format:%e >/dev/null
real 0m0.381s
user 0m0.340s
sys 0m0.024s
$ time git log --pretty=format:"* %cd %cn%n%n%s%n%b" >/dev/null
real 0m0.623s
user 0m0.556s
sys 0m0.052s
And here the times with this patch:
$ time git log --pretty=format:%e >/dev/null
real 0m0.385s
user 0m0.332s
sys 0m0.040s
$ time git log --pretty=format:"* %cd %cn%n%n%s%n%b" >/dev/null
real 0m0.563s
user 0m0.504s
sys 0m0.048s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the --pretty=format placeholders expansions are expensive to
calculate. This is made worse by the current code's use of
interpolate(), which requires _all_ placeholders are to be prepared
up front.
One way to speed this up is to check which placeholders are present
in the format string and to prepare only the expansions that are
needed. That still leaves the allocation overhead of interpolate().
Another way is to use a callback based approach together with the
strbuf library to keep allocations to a minimum and avoid string
copies. That's what this patch does. It introduces a new strbuf
function, strbuf_expand().
The function takes a format string, list of placeholder strings,
a user supplied function 'fn', and an opaque pointer 'context'
to tell 'fn' what thingy to operate on.
The function 'fn' is expected to accept a strbuf, a parsed
placeholder string and the 'context' pointer, and append the
interpolated value for the 'context' thingy, according to the
format specified by the placeholder.
Thanks to Pierre Habouzit for his suggestion to use strchrnul() and
the code surrounding its callsite. And thanks to Junio for most of
this commit message. :)
Here my measurements of most of Paul Mackerras' test cases that
highlighted the performance problem (best of three runs):
(master)
$ time git log --pretty=oneline >/dev/null
real 0m0.390s
user 0m0.340s
sys 0m0.040s
(master)
$ time git log --pretty=raw >/dev/null
real 0m0.434s
user 0m0.408s
sys 0m0.016s
(master)
$ time git log --pretty="format:%H {%P} %ct" >/dev/null
real 0m1.347s
user 0m0.080s
sys 0m1.256s
(interp_find_active -- Dscho)
$ time ./git log --pretty="format:%H {%P} %ct" >/dev/null
real 0m0.694s
user 0m0.020s
sys 0m0.672s
(strbuf_expand -- this patch)
$ time ./git log --pretty="format:%H {%P} %ct" >/dev/null
real 0m0.395s
user 0m0.352s
sys 0m0.028s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
