The new dircache extension CACHE_EXT_RESOLVE_UNDO, whose value is
0x52455543, is actually the ASCII sequence 'REUC', not the ASCII
sequence 'REUN'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update ja.po to match 2010-01-26 version of pot file.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recently introduced resolve_undo_read() expected arithmetic to (void *)
to work on byte-addresses. Correct this.
Noticed by Brandon Casey.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows someone to use configure to build git while at the
same time disabling the python remote helper code. It leverages the
ability of GIT_ARG_SET_PATH to accept an optional second argument
indicating that --without-$PROGRAM is acceptable.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an optional second argument to both GIT_ARG_SET_PATH and
GIT_CONF_APPEND_PATH such that any value of the second argument will
enable configure to set NO_$PROGRAM in addition to an empty
$PROGRAM_PATH. This is initially useful for allowing configure to
disable the use of python, as the remote helper code has nothing
leveraging it yet.
The Makefile already recognizes NO_PYTHON, but configure provided no
way to set it appropriately.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
bash: don't offer remote transport helpers as subcommands
Conflicts:
fast-import.c
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix sync errors due to new Perforce servers.
The P4D/NTX64/2009.2/228098 (2009/12/16) server reports
'move/delete' instead of 'delete'. This causes the Perforce
depot and the git repo to get out of sync. Fixed by adding
the new status string.
Signed-off-by: Pal-Kristian Engstad <pal_engstad@naughtydog.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the release notes "git status" was not mentioned, also shortly explain
the "-dirty" output generated by diff.
Added a paragraph to the "Pitfalls with submodules" section in
user-manual.txt describing new and old behavior of "git status" and "git
diff" for dirty submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
When the first piece of threaded code was introduced in commit 8ecce684, it
came with its own THREADED_DELTA_SEARCH Makefile option. Since this time,
more threaded code has come into the codebase and a NO_PTHREADS option has
also been added. Get rid of the original option as the newer, more generic
option covers everything we need.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to
https://www.redhat.com/archives/fedora-devel-list/2010-January/msg00093.html
scope of %define lasts until the end brace; earlier RPM up to Fedora 12
didn't necessarily honor the scope, but later versions corrected the bug.
Problem and solution both pointed out by Todd Zullinger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is already in the "bells and whistles" section, but it also has a
slight chance of breakage, so let's also mention it in the "changed
behaviors" section.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf used in add_submodule_odb() was never released. So for every
submodule - populated or not - we leaked its object directory name when
using "git diff*" with the --submodule option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same sprit as 4848509 (Fix permissions on test scripts,
2007-04-13), t/lib-patch-mode.sh should not be executable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'b319ef7': (8132 commits)
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
t8005: Nobody writes Russian in shift_jis
Fix severe breakage in "git-apply --whitespace=fix"
Update release notes for 1.6.4
After renaming a section, print any trailing variable definitions
Make section_name_match start on '[', and return the length on success
send-email: detect cycles in alias expansion
Show the presence of untracked files in the bash prompt.
SunOS grep does not understand -C<n> nor -e
Fix export_marks() error handling.
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
git branch: clean up detached branch handling
git branch: avoid unnecessary object lookups
git branch: fix performance problem
git svn: fix shallow clone when upstream revision is too new
do_one_ref(): null_sha1 check is not about broken ref
configure.ac: properly unset NEEDS_SSL_WITH_CRYPTO when sha1 func is missing
janitor: useless checks before free
...
4848509 (Fix permissions on test scripts, 2007-04-13) forgot to make
this included file non-executable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a 3rd, optional, parameter to die_error to allow for extended error
information to be output along with what the error was.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_sort_th) that returns the string that
print_sort_th would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_local_time) that returns the string that
print_local_time would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one of $site_header, $site_footer or $home_text is not defined, you
get extraneous errors in the web logs, for example (line wrapped for
better readibility):
[Wed Jan 13 16:55:42 2010] [error] [client ::1] [Wed Jan 13 16:55:42 2010]
gitweb.cgi: Use of uninitialized value $site_header in -f at
/var/www/gitweb/gitweb.cgi line 3287., referer: http://git/gitweb.cgi
This ensures that those variables are defined before trying to use it.
Note that such error can happen only because of an error in gitweb
config file; building gitweb.cgi can make mentioned variables holding
empty string (it is even the default), but they are still defined.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the main Makefile so you can simply run
make gitweb
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove test_debug lines after 'snapshots: tgz only default format
enabled' and 'snapshots: all enabled in default, use default disabled
value' tests. Those tests constitute of multiple gitweb_run
invocation, therefore outputting gitweb.output for the last gitweb_run
wouldn't help much in debugging test failure, and can only confuse.
For snapshot tests which check for "200 OK" status, change
test_debug 'cat gitweb.output'
to
test_debug 'cat gitweb.headers'
Otherwise when running this test with '--debug' option,
t/t9501-gitweb-standalone-http-status.sh would dump *binary data* (the
snapshot itself) to standard output, which can mess up state of terminal
due to term control characters which can be embedded in output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when the environment was given for the top-level process, checking
in the submodule work tree should use the index file associated with the
work tree of the submodule. Do not export it to the environment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files in /usr/lib/python* are only the support infrastructure for
foreign scm interface yet to be written and/or shipped with git. Don't
include them in the binary package (this will also free us from Python
dependency).
When we ship with foreign scm interface, we will need to package these
files with it in a separate subpackage, but we are not there yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We duplicate the grep_opt structure when using grep threads, but didn't
later free either the patterns attached to this new structure or the
structure itself.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This regression was introduced by commit 0aa958d (rebase: replace
antiquated sed invocation, 2010-01-24), which changed the invocation of
"git rev-list | sed" to "git log".
It can be reproduced by something like this:
$ git rebase -s recursive origin/master
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so. Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).
Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.
Allow the long description to be hidden by setting advice.detachedHead
configuration to false.
We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See http://www.cse.wustl.edu/~schmidt/win32-cv-1.html, section "The
SignalObjectAndWait solution". But note that this implementation does not
use SignalObjectAndWait (which is needed to achieve fairness, but we do
not need fairness).
Note that our implementations of pthread_cond_broadcast and
pthread_cond_signal require that they are invoked with the mutex held that
is used in the pthread_cond_wait calls.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to GIT_SSH, SVN_SSH requires quotes for paths that contain
spaces. As GIT_SSH will not work if it contains quotes, it is safe to
assume it never contains quotes. Also, adding quotes to SVN_SSH for paths
that do not contain spaces does no harm. So we always add quotes when
deriving SVN_SSH from GIT_SSH on msys.
This fixes msysGit issue 385, see
http://code.google.com/p/msysgit/issues/detail?id=385
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this script is expected to be sourced instead of
executed on its own, the #!/bin/sh line provides simple
documentation about what format the file is in.
In particular, the lack of such a line was confusing the
valgrind support of our test scripts, which assumed that any
executable without a #!-line should be intercepted and run
through valgrind. So during valgrind-enabled tests, any
script sourcing this file actually sourced the valgrind
interception script instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5516. Reading the code shows we
malloc enough for our string, but not trailing NUL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shortcut was not properly recognized previously.
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Thomas Moulard <thomas.moulard@gmail.com>
Signed-off-by: Guy Brand <gb@unistra.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In do_git_gui the path of the git executable has to be put into a
list, otherwise calling it will fail when when spaces are present
in its path.
Reported-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
