Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Document `git status -v`, including its new doubled `-vv` form.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a good user sees the "too long, consider -uno" advice when
running `git status`, they should check out the man page to find out
more. This change suggests they try untracked cache before -uno.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct backtick quoting for some of the modification states to give
consistent web rendering.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hasn't been true since 2556b996 (status: disable display of '#'
comment prefix by default, 2013-09-06).
Signed-off-by: Dirk Wallenstein <halsmit@t-online.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git status' and 'git commit' can be told to also show the output of "git
submodule summary" by setting the "status.submodulesummary" config option.
But status and commit also honor the "diff.ignoreSubmodules" and the
"submodule.<name>.ignore" settings, which then disable the summary partly
or completely. This - and the fact that the last two settings do not
affect the "git submodule" commands at all - is not well documented.
Extend the documentation in those places where "status.submodulesummary",
"diff.ignoreSubmodules" and "submodule.<name>.ignore" are described to
better explain these dependencies.
Thanks-to: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
In some repostories users experience that "git status" command takes
long time. The command spends some time searching the file system
for untracked files.
Explain the trade-off struck by the default choice of `normal` to
help users make an appropriate choice better, before talking about
the configuration variable.
Inspired by Torsten Bögershausen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can currently set the output format to --short or
--porcelain. There is no --long, because we default to it
already. However, you may want to override an alias that
uses "--short" to get back to the default.
This requires a little bit of refactoring, because currently
we use STATUS_FORMAT_LONG internally to mean the same as
"the user did not specify anything". By expanding the enum
to include STATUS_FORMAT_NONE, we can distinguish between
the implicit and explicit cases. This effects these
conditions:
1. The user has asked for NUL termination. With NONE, we
currently default to turning on the porcelain mode.
With an explicit --long, we would in theory use NUL
termination with the long mode, but it does not support
it. So we can just complain and die.
2. When an output format is given to "git commit", we
default to "--dry-run". This behavior would now kick in
when "--long" is given, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of asciidoc will treat "->" as a
single-glyph arrow symbol, unless it is inside a literal
code block. This is a problem if we are discussing literal
output and want to show the ASCII characters.
Our usage falls into three categories:
1. Inside a code block. These can be left as-is.
2. Discussing literal output or code, but inside a
paragraph. This patch escapes these as "\->".
3. Using the arrow as a symbolic element, such as "use the
Edit->Account Settings menu". In this case, the
arrow symbol is preferable, so we leave it as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --porcelain format was originally identical to the
--short format, but designed to be stable as the short
format changed. Since this was written, the short format
picked up a few incompatible niceties, but this description
was never changed.
Let's mention the differences. While we're at it, let's add
some sub-section headings to make the "output" section a
little easier to navigate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Incorporates the detailed explanation from Jeff King in
<20100410040959.GA11977@coredump.intra.peff.net> and fixes
the bug noted by Junio C Hamano in
<7vmxxc1i8g.fsf@alter.siamese.dyndns.org>.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Otherwise, 'status' and 'status -s' in a subdir would produce different
names. This change is all the more important because status.relativePaths
is on by default.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short format does not respect any of the usual status.*
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "short" format was added to "git status" recently to
provide a less verbose way of looking at the same
information. This has two practical uses:
1. Users who want a more dense display of the information.
2. Scripts which want to parse the information and need a
stable, easy-to-parse interface.
For now, the "--short" format covers both of those uses.
However, as time goes on, users of (1) may want additional
format tweaks, or for "git status" to change its behavior
based on configuration variables. Those wishes will be at
odds with (2), which wants to stability for scripts.
This patch introduces a separate --porcelain option early to
avoid problems later on. Right now the --short and
--porcelain outputs are identical. However, as time goes on,
we will have the freedom to customize --short for human
consumption while keeping --porcelain stable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes tentative "git stat" and make it take over "git status".
There are some tests that expect "git status" to exit with non-zero status
when there is something staged. Some tests expect "git status path..." to
show the status for a partial commit.
For these, replace "git status" with "git commit --dry-run". For the
ones that do not attempt a dry-run of a partial commit that check the
output from the command, check the output from "git status" as well, as
they should be identical.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches 'git commit/status' show a new 'Modified submodules'
section, which is an output from:
git submodule summary --cached --for-status --summary-limit <limit>
just before the 'Untracked files' section.
The <limit> is given by the config variable status.submodulesummary
to limit the submodule summary size. status.submodulesummary is a
bool/int variable with value:
- false or 0 by default to disable the summary, or
- positive number to limit the summary size, or
- true or negative number to unlimit the summary size.
Also mention status.submodulesummary in the documentation.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tip about speeding up subsequent operations is now
obsolete; since aecbf914, git-diff now squelches empty diffs
and performs an automatic refresh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is the result of reading over git-status with an
editorial eye:
- fix a few typo/grammatical errors
- mention untracked output
- present output types in the order they appear from the
command
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git-status was recently changed to output relative
paths. Setting this variable to false restores the old behavior for
any old-timers that prefer it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently with all other diff oriented commands, we have given paths
relative to the work tree root in git-status output for a long time.
This documents the recent behaviour change, as people's eyes (and worse
yet, scripts, although scripts should not parse "git status" output) may
depend on the old behaviour.
In the longer run, giving a --full-name option to git-diff Porcelain
similar to what ls-files has, and change the default for git-diff
Porcelain to show relative paths may be a good thing to do, in order to
hide the oddballness of this git-status behaviour, but that would have a
rather large impact to established expectation by existing users.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
