test_perf() runs each test in its own subshell which makes it difficult
to persist variables between tests. test_export() addresses this
shortcoming by grabbing the values of specified variables after a test
runs but before the subshell exits, and writes those values to a file
which is loaded into the environment of subsequent tests.
To grab the values to be persisted, test_export() pipes the output of
the shell's builtin `set` command through `sed` which plucks them out
using a regular expression along the lines of `s/^(var1|var2)/.../p`.
Unfortunately, though, this use of alternation is not portable. For
instance, BSD-lineage `sed` (including macOS `sed`) does not support it
in the default "basic regular expression" mode (BRE). It may be possible
to enable "extended regular expression" mode (ERE) in some cases with
`sed -E`, however, `-E` is neither portable nor part of POSIX.
Fortunately, alternation is unnecessary in this case and can easily be
avoided, so replace it with a series of simple expressions such as
`s/^var1/.../p;s/^var2/.../p`.
While at it, tighten the expressions so they match the variable names
exactly rather than matching prefixes (i.e. use `s/^var1=/.../p`).
If the requirements of test_export() become more complex in the future,
then an alternative would be to replace `sed` with `perl` which supports
alternation on all platforms, however, the simple elimination of
alternation via multiple `sed` expressions suffices for the present.
Reported-by: Sangeeta <sangunb09@gmail.com>
Diagnosed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to display the annoying warning on every pull... only
the ones that are not fast-forward.
The current warning tests still pass, but not because of the arguments
or the configuration, but because they are all fast-forward.
We need to test non-fast-forward situations now.
Suggestions-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the advise() call that teaches users how they can choose
between merge and rebase into a helper function. This revealed that
the caller's logic needs to be further clarified to allow future
actions (like "erroring out" instead of the current "go ahead and
merge anyway") that should happen whether the advice message is
squelched out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy enough to do, and gives a more descriptive name to the
variable that is scoped in a more focused way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement cases where renames are involved in type changes (i.e. the
side of history that didn't rename the file changed its type from a
regular file to a symlink or submodule). There was some code to handle
this in merge-recursive but only in the special case when the renamed
file had no content changes. The code here works differently -- it
knows process_entry() can handle mode conflicts, so it does a few
minimal tweaks to ensure process_entry() can just finish the job as
needed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement handling of normal renames. This code replaces the following
from merge-recurisve.c:
* the code relevant to RENAME_NORMAL in process_renames()
* the RENAME_NORMAL case of process_entry()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_rename_normal()
* setup_rename_conflict_info()
The consolidation of four separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
(To be fair, the code for handling normal renames wasn't all that
complicated beforehand, but it's still much simpler now.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(2to1) and rename/add handling, i.e. a file is
renamed into a location where another file is added (with that other
file either being a plain add or itself coming from a rename). Note
that rename collisions can also have a special case stacked on top: the
file being renamed on one side of history is deleted on the other
(yielding either a rename/add/delete conflict or perhaps a
rename/rename(2to1)/delete[/delete]) conflict.
One thing to note here is that when there is a double rename, the code
in question only handles one of them at a time; a later iteration
through the loop will handle the other. After they've both been
handled, process_entry()'s normal add/add code can handle the collision.
This code replaces the following from merge-recurisve.c:
* all the 2to1 code in process_renames()
* the RENAME_TWO_FILES_TO_ONE case of process_entry()
* handle_rename_rename_2to1()
* handle_rename_add()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_file_collision()
* setup_rename_conflict_info()
The consolidation of six separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/delete conflicts, i.e. one side renames a file and the
other deletes the file. This code replaces the following from
merge-recurisve.c:
* the code relevant to RENAME_DELETE in process_renames()
* the RENAME_DELETE case of process_entry()
* handle_rename_delete()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_change_delete()
* setup_rename_conflict_info()
The consolidation of five separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
To be fair, there is a _slight_ tweak to process_entry() here, because
rename/delete cases will also trigger the modify/delete codepath.
However, we only want a modify/delete message to be printed for a
rename/delete conflict if there is a content change in the renamed file
in addition to the rename. So process_renames() and process_entry()
aren't quite fully orthogonal, but they are pretty close.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(1to2) handling, i.e. both sides of history
renaming a file and rename it differently. This code replaces the
following from merge-recurisve.c:
* all the 1to2 code in process_renames()
* the RENAME_ONE_FILE_TO_TWO case of process_entry()
* handle_rename_rename_1to2()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_file_collision()
* setup_rename_conflict_info()
The consolidation of five separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
To be fair, there is a _slight_ tweak to process_entry() here to make
sure that the two different paths aren't marked as clean but are left in
a conflicted state. So process_renames() and process_entry() aren't
quite entirely orthogonal, but they are pretty close.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(1to1) handling, i.e. both sides of history
renaming a file but renaming the same way. This code replaces the
following from merge-recurisve.c:
* all the 1to1 code in process_renames()
* the RENAME_ONE_FILE_TO_ONE case of process_entry()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_rename_normal()
* setup_rename_conflict_info()
The consolidation of four separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this unreachable code. It was found by SunCC, it's found by a
non-fatal warning emitted by SunCC. It's one of the things it's more
vehement about than GCC & Clang.
It complains about a lot of other similarly unreachable code, e.g. a
BUG(...) without a "return", and a "return 0" after a long if/else,
both of whom have "return" statements. Those are also genuine
redundancies to a compiler, but arguably make the code a bit easier to
read & less fragile to maintain.
These return/break cases are just unnecessary however, and as seen
here the surrounding code just did a plain "return" without a "break"
already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 15b52a44 (compat-util: type-check parameters of no-op
replacement functions, 2020-08-06) turned a handful of no-op
C-preprocessor macros into static inline functions to give the
callers a better type checking for their parameters, it forgot
to return anything from the stubbed out setitimer() function,
even though the function was defined to return an int just like the
real thing.
Since the original C-preprocessor macro implementation was to just
turn the call to the function an empty statement, we know that the
existing callers do not check the return value from it, and it does
not matter what value we return. But it is safer to pretend that
the call succeeded by returning 0 than making it fail by returning -1
and clobbering errno with some value.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two "static inline" functions, both of which return void, call
strmap_remove() and tries to return the value it returns as their
return value, which is just bogus, as strmap_remove() returns void
itself. Call it in the void context and fall-thru the control to
the end instead.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0b4396f068, (git-p4: make python2.7 the oldest supported version,
2019-12-13) pointed out that git-p4 uses Python 2.7-or-later features
in the code.
In addition, git-p4 gained enough support for Python 3 from
6cec21a82f, (git-p4: encode/decode communication with p4 for
python3, 2019-12-13).
Let's update our documentation to reflect that fact.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test update.
* js/t5526-with-no-particular-primary-branch-name:
t5526: drop the prereq expecting the default branch name `main`
t5526: avoid depending on a specific default branch name
Tighten error checking in the codepath that responds to "git fetch".
* jk/check-config-parsing-error-in-upload-pack:
upload-pack: propagate return value from object filter config callback
Newer versions of xsltproc can assign IDs in HTML documents it
generates in a consistent manner. Use the feature to help format
HTML version of the user manual reproducibly.
* ae/doc-reproducible-html:
doc: make HTML manual reproducible
The glossary described a branch as an "active" line of development,
which is misleading---a stale and non-moving branch is still a
branch.
* so/glossary-branch-is-not-necessarily-active:
glossary: improve "branch" definition
"@" sometimes worked (e.g. "git push origin @:there") as a part of
a refspec element, but "git push origin @" did not work, which has
been corrected.
* fc/atmark-in-refspec:
refspec: make @ a synonym of HEAD
tests: push: trivial cleanup
tests: push: improve cleanup of HEAD tests
"git $cmd $args", when $cmd is not a recognised subcommand, by
default tries to see if $cmd is a typo of an existing subcommand
and optionally executes the corrected command if there is only one
possibility, depending on the setting of help.autocorrect; the
users can now disable the whole thing, including the cycles spent
to find a likely typo, by setting the configuration variable to
'never'.
* dd/help-autocorrect-never:
help.c: help.autocorrect=never means "do not compute suggestions"
Eventually we want to be omit the advice when we can fast-forward
in which case there is no reason to require the user to choose
between rebase or merge.
In order to do so, we need to delay giving the advice up to the
point where we can check if we can fast-forward or not.
Additionally, config_get_rebase() was probably never its true home.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would like to be able to make this check before the decision to
rebase is made in a future step. Besides, using a separate helper
makes the code easier to follow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add code which determines which kind of special rename case each rename
corresponds to, but leave the handling of each type unimplemented for
now. Future commits will implement each one.
There is some tenuous resemblance to merge-recursive's
process_renames(), but comparing the two is very unlikely to yield any
insights. merge-ort's process_renames() is a bit complex and I would
prefer if I could simplify it more, but it is far easier to grok than
merge-recursive's function of the same name in my opinion. Plus,
merge-ort handles more rename conflict types than merge-recursive does.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based heavily on merge-recursive's get_diffpairs() function, and also
includes the necessary paired call to diff_warn_rename_limit() so that
users will be warned if merge.renameLimit is not sufficiently large for
rename detection to run.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will grow later, but we only need a few fields for basic rename
handling.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation of the file system monitor extension to
describe version 2.
The format was extended to support opaque tokens in:
56c6910028 fsmonitor: change last update timestamp on the index_state to opaque token
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was implemented in the 'git multi-pack-index' command and
merged in 468b3221 (Merge branch 'ds/multi-pack-verify',
2018-10-10).
And there's no 'git midx' command.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give ample warning for users wishing to override Git's the fall-back
for an unconfigured `init.defaultBranch` (in case we decide to change it
in a future Git version), let's introduce some advice that is shown upon
`git init` when that value is not set.
Note: two test cases in Git's test suite want to verify that the
`stderr` output of `git init` is empty. It is now necessary to suppress
the advice, we now do that via the `init.defaultBranch` setting. While
not strictly necessary, we also set this to `false` in
`test_create_repo()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to introduce a message giving users running `git init` some
advice about `init.defaultBranch`. This will necessarily be done in
`repo_default_branch_name()`.
Not all code paths want to show that advice, though. In particular, the
`git clone` codepath _specifically_ asks for `init_db()` to be quiet,
via the `INIT_DB_QUIET` flag.
In preparation for showing users above-mentioned advice, let's change
the function signature of `get_default_branch_name()` to accept the
parameter `quiet`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation does not mention any future plan to change 'master' to
other value. It is a good idea to document this, though.
Initial-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The focus here is on adding a path_msg() which will queue up
warning/conflict/notice messages about the merge for later processing,
storing these in a pathname -> strbuf map. It might seem like a big
change, but it really just is:
* declaration of necessary map with some comments
* initialization and recording of data
* a bunch of code to iterate over the map at print/free time
* at least one caller in order to avoid an error about having an
unused function (which we provide in the form of implementing
modify/delete conflict handling).
At this stage, it is probably not clear why I am opting for delayed
output processing. There are multiple reasons:
1. Merges are supposed to abort if they would overwrite dirty changes
in the working tree. We cannot correctly determine whether changes
would be overwritten until both rename detection has occurred and
full processing of entries with the renames has finalized.
Warning/conflict/notice messages come up at intermediate codepaths
along the way, so unless we want spurious conflict/warning messages
being printed when the merge will be aborted anyway, we need to
save these messages and only print them when relevant.
2. There can be multiple messages for a single path, and we want all
messages for a give path to appear together instead of having them
grouped by conflict/warning type. This was a problem already with
merge-recursive.c but became even more important due to the
splitting apart of conflict types as discussed in the commit
message for 1f3c9ba707 ("t6425: be more flexible with rename/delete
conflict messages", 2020-08-10)
3. Some callers might want to avoid showing the output in certain
cases, such as if the end result is a clean merge. Rebases have
typically done this.
4. Some callers might not want the output to go to stdout or even
stderr, but might want to do something else with it entirely.
For example, a --remerge-diff option to `git show` or `git log
-p` that remerges on the fly and diffs merge commits against the
remerged version would benefit from stdout/stderr not being
written to in the standard form.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplistic and weird-looking patch is here to facilitate future
patch submissions. Adding this stub allows rename detection code to
reference it in one patch series, while a separate patch series can
define the implementation, and then both series can merge cleanly and
work nicely together at that point.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b658536f59 ("merge-ort: add some high-level algorithm structure",
2020-10-27) added high-level structure of the ort merge algorithm. As
we have added more and more functions, that high-level structure has
been slightly obscured. Since functions are still grouped according to
this high-level structure, add comments denoting sections where all the
functions are specifically tied to a piece of the high-level structure.
This function groupings include a few sub-divisions of the original
high-level structure, including some sub-divisions that are yet to be
submitted. Each has (or will have) several functions all serving as
helpers to one or two main functions for each section.
As an added bonus, the comments will serve to provide a small textual
separation between nearby sections and allow the next three patch series
to be submitted independently and merge cleanly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field will be used in future patches to allow removal of paths from
opt->priv->paths.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field is not yet used, but will be used by both the rename handling
code, and the conflict type handling code in process_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
