* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Original bug report and test case by Björn Steinbrink.
Björn Steinbrink <B.Steinbrink@gmx.de> wrote:
> Hi Eric,
>
> seems that the empty symlink stuff gets confused about which revision to
> use when looking for the parent's file.
>
> r3 = f1a6fcf6b0a1c4a373d0b2b65a3d70700084f361 (tags/1.0.1)
> Found possible branch point: file:///home/doener/h/svn/tags/1.0 => file:///home/doener/h/svn/branches/1.0, 4
> Found branch parent: (1.0) 63ae640ba01014ecbb3df590999ed1fa5914545b
> Following parent with do_switch
> Successfully followed parent
> r5 = 26fcfef5bcced97ab74faf1af7341a2ae0d272aa (1.0)
> Found possible branch point: file:///home/doener/h/svn/branches/1.0 => file:///home/doener/h/svn/tags/1.0.1, 5
> Found branch parent: (tags/1.0.1) 26fcfef5bcced97ab74faf1af7341a2ae0d272aa
> Following parent with do_switch
> Scanning for empty symlinks, this may take a while if you have many empty files
> You may disable this with `git config svn.brokenSymlinkWorkaround false'.
> This may be done in a different terminal without restarting git svn
> Filesystem has no item: File not found: revision 3, path '/branches/1.0/file' at /usr/local/libexec/git-core/git-svn line 3318
>
> Note how it tries to look at revision 3 instead of revision 5 (which it
> correctly detected as the parent). The import succeeds when
> svn.brokenSymlinkWorkaround is set to false. Testcase below.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The function strip_path_suffix() will try to strip a given suffix from
a given path. The suffix must start at a directory boundary (i.e. "core"
is not a path suffix of "libexec/git-core", but "git-core" is).
Arbitrary runs of directory separators ("slashes") are assumed identical.
Example:
strip_path_suffix("C:\\msysgit/\\libexec\\git-core",
"libexec///git-core", &prefix)
will set prefix to "C:\\msysgit" and return 0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing the output of "git branch" anywhere.
Not only does this not protect us against regressions in the
output, but we are not exercising code paths which may have
bugs (such as the one fixed by 45e2b61).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
Some shells do not like "export var=val"; the right way to write
it is to do an assignment and then export just the variable name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The improved error handling catches a bug in filter-branch when using
-d pointing to a path outside any git repository:
$ git filter-branch -d /tmp/foo master
fatal: Not a git repository (or any of the parent directories): .git
This error message comes from git for-each-ref in line 224. GIT_DIR is
set correctly by git-sh-setup (to the foo.git repository), but not
exported (yet).
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git format-patch is given multiple --cc arguments, it generates a
Cc header that looks like:
Cc: first@example.com,
second@example.com,
third@example.com
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from
other directories of the repository or the work tree.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 72183cb2 (Fix gitdir detection when in subdir of
gitdir, 2009-01-16) added a test to 't1501-worktree' to check the
behaviour of 'git rev-parse --git-dir' in a special case. However,
t1501 is about testing separate work tree setups, and not about basic
'rev-parse' functionality, which is tested in t1500-rev-parse.
Therefore, this patch moves that test to t1500.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1.6.2 will have @{-1} syntax advertised as "usable anywhere you can use
a branch name". However, "git merge @{-1}" did not work.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the new "@{-1} syntax to refer to the previous branch to "git
branch". After looking at somebody's faulty patch series on a topic
branch too long, if you decide it is not worth merging, you can just say:
$ git checkout master
$ git branch -D @{-1}
to get rid of it without having to type the name of the topic you now hate
so much for wasting a lot of your time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afe5d3d5 introduced a safety valve to symbolic-ref to
disallow installing an invalid HEAD. It was accompanied by
b229d18a, which changed validate_headref to require that
HEAD contain a pointer to refs/heads/ instead of just refs/.
Therefore, the safety valve also checked for refs/heads/.
As it turns out, topgit is using refs/top-bases/ in HEAD,
leading us to re-loosen (at least temporarily) the
validate_headref check made in b229d18a. This patch does the
corresponding loosening for the symbolic-ref safety valve,
so that the two are in agreement once more.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "cloning from an empty repository", we have a configuration to
describe the remote's URL and the default ref mappings, but we lack the
branch configuration for the default branch we create on our end,
"master".
It is likely that the empty repository we cloned from will point the
default "master" branch with its HEAD, so prepare the local configuration
to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is more than one file that are changed, running git diff with
GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies.
The check introduced in 479b0ae (diff: refactor tempfile cleanup handling,
2009-01-22) to detect a temporary file slot that forgot to remove its
temporary file was inconsistent with the way the codepath to remove the
temporary to mark the slot that it is done with it.
This patch fixes this problem and adds a test case for it.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead. A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".
We now treat all rules with "\" as wildcard rules.
Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9273b56 (filter-branch: Fix fatal error on bare repositories, 2009-02-03)
fixed a missing check of return status from an underlying command in
git-filter-branch, but there still are places that do not check errors.
For example, the command does not pay attention to the exit status of the
command given by --commit-filter. It should abort in such a case.
This attempts to fix all the remaining places that fails to checks errors.
In two places, I've had to break apart pipelines in order to check the
error code for the first stage of the pipeline, as discussed here:
http://kerneltrap.org/mailarchive/git/2009/1/28/4835614
Feedback on this patch was provided by Johannes Sixt, Johannes Schindelin
and Junio C Hamano. Thomas Rast helped with pipeline error handling.
Signed-off-by: Eric Kidd <git@randomhacks.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
test case for regression caused by git-svn empty symlink fix
git-svn: fix broken symlink workaround when switching branches
git-svn: Print revision while searching for earliest use of path
git-svn: abstract out a block into new method other_gs()
git-svn: allow disabling expensive broken symlink checks
Commit dbc6c74d08 "git-svn: handle empty
files marked as symlinks in SVN" caused a regression in an unusual case
where a branch has been created in SVN, later deleted and then created
again from another branch point and the original branch point had empty
files not in the new branch. In some cases git svn fetch will then fail
while trying to fetch the empty file from the wrong SVN revision.
This adds a test case that reproduces the issue.
[ew: added additional test to ensure file was created correctly
made test file executable ]
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since dbc6c74d08, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
