With the new http.curloptResolve configuration, the CURLOPT_RESOLVE
mechanism that allows cURL based applications to use pre-resolved
IP addresses for the requests is exposed to the scripts.
* cc/http-curlopt-resolve:
http: add custom hostname to IP address resolutions
By allowing the path to be enclosed in double-quotes, we can avoid
the limitation that paths cannot contain colons.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `--add-virtual-file=<path>:<content>` option, `git archive` now
supports use cases where relatively trivial files need to be added that
do not exist on disk.
This will allow us to generate `.zip` files with generated content,
without having to add said content to the object database and without
having to write it out to disk.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc: tweaked <path> handling]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspecs with only negative elements did not work with some
commands that pass the pathspec along to a subprocess. For
instance,
$ git add -p -- ':!*.txt'
should add everything except for paths ending in ".txt", but it gets
complaint from underlying "diff-index" and aborts.
We used to error out when a pathspec with only negative elements in
it, like the one in the above example. Later, 859b7f1d (pathspec:
don't error out on all-exclusionary pathspec patterns, 2017-02-07)
updated the logic to add an empty string as an extra element. The
intention was to let the extra element to match everything and let
the negative ones given by the user to subtract from it.
At around the same time, we were migrating from "an empty string is
a valid pathspec element that matches everything" to "either a dot
or ":/" is used to match all, and an empty string is rejected",
between d426430e (pathspec: warn on empty strings as pathspec,
2016-06-22) and 9e4e8a64 (pathspec: die on empty strings as
pathspec, 2017-06-06). I think 9e4e8a64, which happened long after
859b7f1d happened, was not careful enough to turn the empty string
859b7f1d added to either a dot or ":/".
A care should be taken as the definition of "everything" depends on
subcommand. For the purpose of "add -p", adding a "." to add
everything in the current directory is the right thing to do. But
for some other commands, ":/" (i.e. really really everything, even
things outside the current subdirectory) is the right choice.
We would break commands in a big way if we get this wrong, so add a
handful of test pieces to make sure the resulting code still
excludes the paths that are expected and includes "everything" else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical "git revert" commit uses the full title of the original
commit in its title, and starts its body of the message with:
This reverts commit 8fa7f667cf61386257c00d6e954855cc3215ae91.
This does not encourage the best practice of describing not just
"what" (i.e. "Revert X" on the title says what we did) but "why"
(i.e. and it does not say why X was undesirable).
We can instead phrase this first line of the body to be more like
This reverts commit 8fa7f667 (do this and that, 2022-04-25)
so that the title does not have to be
Revert "do this and that"
We can instead use the title to describe "why" we are reverting the
original commit.
Introduce the "--reference" option to "git revert", and also the
revert.reference configuration variable, which defaults to false, to
tweak the title and the first line of the draft commit message for
when creating a "revert" commit.
When this option is in use, the first line of the pre-filled editor
buffer becomes a comment line that tells the user to say _why_. If
the user exits the editor without touching this line by mistake,
what we prepare to become the first line of the body, i.e. "This
reverts commit 8fa7f667 (do this and that, 2022-04-25)", ends up to
be the title of the resulting commit. This behaviour is designed to
help such a user to identify such a revert in "git log --oneline"
easily so that it can be further reworded with "git rebase -i" later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the tests that exercise implicit shutdown cases
to make them more robust and less racy.
The fsmonitor--daemon will implicitly shutdown in a variety
of situations, such as when the ".git" directory is deleted
or renamed.
The existing tests would delete or rename the directory, sleep
for one second, and then check the status of the daemon. This
is racy, since the client/status command has no way to sync
with the daemon. This was noticed occasionally on very slow
CI build machines where it would cause a random test to fail.
Replace the simple sleep with a sleep-and-retry loop.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test in t7527 to verify that we get a stray warning from
`git fsmonitor--daemon start` when indirectly called from
`git submodule absorbgitdirs`.
Update `git fsmonitor--daemon` to take (and ignore) the `--super-prefix`
argument to suppress the warning.
When we have:
1. a submodule with a `sub/.git/` directory (rather than a `sub/.git`
file).
2. `core.fsmonitor` is turned on in the submodule, but the daemon is
not yet started in the submodule.
3. and someone does a `git submodule absorbgitdirs` in the super.
Git will recursively invoke `git submodule--helper absorb-git-dirs`
in the submodule. This will read the index and may attempt to start
the fsmonitor--daemon with the `--super-prefix` argument.
`git fsmonitor--daemon start` does not accept the `--super-prefix`
argument and causes a warning to be issued.
This does not cause a problem because the `refresh_index()` code
assumes a trivial response if the daemon does not start.
The net-net is a harmelss, but stray warning. Lets eliminate the
warning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Confirm that the daemon reports events using the on-disk
spelling for Unicode NFC/NFD characters. On APFS we still
have Unicode aliasing, so we cannot create two files that
only differ by NFC/NFD, but the on-disk format preserves
the spelling used to create the file. On HFS+ we also
have aliasing, but the path is always stored on disk in
NFD.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a set of prereqs to help understand how file names
are handled by the filesystem when they contain NFC and NFD
Unicode characters.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that FS events from the OS are received using the preserved,
on-disk spelling of files/directories rather than spelling used
to make the change.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Never set CE_FSMONITOR_VALID on the cache-entry of submodule
directories.
During a client command like 'git status', we may need to recurse
into each submodule to compute a status summary for the submodule.
Since the purpose of the ce_flag is to let Git avoid scanning a
cache-entry, setting the flag causes the recursive call to be
avoided and we report incorrect (no status) for the submodule.
We created an OS watch on the root directory of our working
directory and we receive events for everything in the cone
under it. When submodules are present inside our working
directory, we receive events for both our repo (the super) and
any subs within it. Since our index doesn't have any information
for items within the submodules, we can't use those events.
We could try to truncate the paths of those events back to the
submodule boundary and mark the GITLINK as dirty, but that
feels expensive since we would have to prefix compare every FS
event that we receive against a list of submodule roots. And
it still wouldn't be sufficient to correctly report status on
the submodule, since we don't have any space in the cache-entry
to cache the submodule's status (the 'SCMU' bits in porcelain
V2 speak). That is, the CE_FSMONITOR_VALID bit just says that
we don't need to scan/inspect it because we already know the
answer -- it doesn't say that the item is clean -- and we
don't have space in the cache-entry to store those answers.
So we should always do the recursive scan.
Therefore, we should never set the flag on GITLINK cache-entries.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create unit tests to move a directory. Verify that `git status`
gives the same result with and without FSMonitor enabled.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
VFS for Git virtual repositories are incompatible with FSMonitor.
VFS for Git is a downstream fork of Git. It contains its own custom
file system watcher that is aware of the virtualization. If a working
directory is being managed by VFS for Git, we should not try to watch
it because we may get incomplete results.
We do not know anything about how VFS for Git works, but we do
know that VFS for Git working directories contain a well-defined
config setting. If it is set, mark the working directory as
incompatible.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bare repos do not have a worktree, so there is nothing for the
daemon watch.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a stress test to hammer on the fsmonitor daemon.
Create a client-side thread pool of n threads and have
each of them make m requests as fast as they can.
We do not currently inspect the contents of the response.
We're only interested in placing a heavy request load on
the daemon.
This test is useful for interactive testing and various
experimentation. For example, to place additional load
on the daemon while another test is running. We currently
do not have a test script that actually uses this helper.
We might add such a test in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create some test repos with UTF8 characters in the pathname of the
root directory and verify that the builtin FSMonitor can watch them.
This test is mainly for Windows where we need to avoid `*A()`
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach FSMonitor daemon on Windows to recognize shortname paths as
aliases of normal longname paths. FSMonitor clients, such as `git
status`, should receive the longname spelling of changed files (when
possible).
Sometimes we receive FS events using the shortname, such as when a CMD
shell runs "RENAME GIT~1 FOO" or "RMDIR GIT~1". The FS notification
arrives using whatever combination of long and shortnames were used by
the other process. (Shortnames do seem to be case normalized,
however.)
Use Windows GetLongPathNameW() to try to map the pathname spelling in
the notification event into the normalized longname spelling. (This
can fail if the file/directory is deleted, moved, or renamed, because
we are asking the FS for the mapping in response to the event and
after it has already happened, but we try.)
Special case the shortname spelling of ".git" to avoid under-reporting
these events.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't bother to freshen objects stored in a cruft pack individually
by updating the `.mtimes` file. This is because we can't portably `mmap`
and write into the middle of a file (i.e., to update the mtime of just
one object). Instead, we would have to rewrite the entire `.mtimes` file
which may incur some wasted effort especially if there a lot of cruft
objects and they are freshened infrequently.
Instead, force the freshening code to avoid an optimizing write by
writing out the object loose and letting it pick up a current mtime.
This works because we prefer the mtime of the loose copy of an object
when both a loose and packed one exist (whether or not the packed copy
comes from a cruft pack or not).
This could certainly do with a test and/or be included earlier in this
series/PR, but I want to wait until after I have a chance to clean up
the overly-repetitive nature of the cruft pack tests in general.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the new `git repack --cruft` mode from `git gc` via a new opt-in
flag. When invoked like `git gc --cruft`, `git gc` will avoid exploding
unreachable objects as loose ones, and instead create a cruft pack and
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using cruft packs, the following race can occur when a geometric
repack that writes a MIDX bitmap takes place afterwords:
- First, create an unreachable object and do an all-into-one cruft
repack which stores that object in the repository's cruft pack.
- Then make that object reachable.
- Finally, do a geometric repack and write a MIDX bitmap.
Assuming that we are sufficiently unlucky as to select a commit from the
MIDX which reaches that object for bitmapping, then the `git
multi-pack-index` process will complain that that object is missing.
The reason is because we don't include cruft packs in the MIDX when
doing a geometric repack. Since the "make that object reachable" doesn't
necessarily mean that we'll create a new copy of that object in one of
the packs that will get rolled up as part of a geometric repack, it's
possible that the MIDX won't see any copies of that now-reachable
object.
Of course, it's desirable to avoid including cruft packs in the MIDX
because it causes the MIDX to store a bunch of objects which are likely
to get thrown away. But excluding that pack does open us up to the above
race.
This patch demonstrates the bug, and resolves it by including cruft
packs in the MIDX even when doing a geometric repack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In servers which set the pack.window configuration to a large value, we
can wind up spending quite a lot of time finding new bases when breaking
delta chains between reachable and unreachable objects while generating
a cruft pack.
Introduce a handful of `repack.cruft*` configuration variables to
control the parameters used by pack-objects when generating a cruft
pack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose a way to split the contents of a repository into a main and cruft
pack when doing an all-into-one repack with `git repack --cruft -d`, and
a complementary configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous patch, pack-objects learned how to generate a cruft pack
so long as no objects are dropped.
This patch teaches pack-objects to handle the case where a non-never
`--cruft-expiration` value is passed. This case is slightly more
complicated than before, because we want pack-objects to save
unreachable objects which would have been pruned when there is another
recent (i.e., non-prunable) unreachable object which reaches the other.
We'll call these objects "unreachable but reachable-from-recent".
Here is how pack-objects handles `--cruft-expiration`:
- Instead of adding all objects outside of the kept pack(s) into the
packing list, only handle the ones whose mtime is within the grace
period.
- Construct a reachability traversal whose tips are the
unreachable-but-recent objects.
- Then, walk along that traversal, stopping if we reach an object in
the kept pack. At each step along the traversal, we add the object
we are visiting to the packing list.
In the majority of these cases, any object we visit in this traversal
will already be in our packing list. But we will sometimes encounter
reachable-from-recent cruft objects, which we want to retain even if
they aged out of the grace period.
The most subtle point of this process is that we actually don't need to
bother to update the rescued object's mtime. Even though we will write
an .mtimes file with a value that is older than the expiration window,
it will continue to survive cruft repacks so long as any objects which
reach it haven't aged out.
That is, a future repack will also exclude that object from the initial
packing list, only to discover it later on when doing the reachability
traversal.
Finally, stopping early once an object is found in a kept pack is safe
to do because the kept packs ordinarily represent which packs will
survive after repacking. Assuming that it _isn't_ safe to halt a
traversal early would mean that there is some ancestor object which is
missing, which implies repository corruption (i.e., the complete set of
reachable objects isn't present).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `pack-objects` how to generate a cruft pack when no objects are
dropped (i.e., `--cruft-expiration=never`). Later patches will teach
`pack-objects` how to generate a cruft pack that prunes objects.
When generating a cruft pack which does not prune objects, we want to
collect all unreachable objects into a single pack (noting and updating
their mtimes as we accumulate them). Ordinary use will pass the result
of a `git repack -A` as a kept pack, so when this patch says "kept
pack", readers should think "reachable objects".
Generating a non-expiring cruft packs works as follows:
- Callers provide a list of every pack they know about, and indicate
which packs are about to be removed.
- All packs which are going to be removed (we'll call these the
redundant ones) are marked as kept in-core.
Any packs the caller did not mention (but are known to the
`pack-objects` process) are also marked as kept in-core. Packs not
mentioned by the caller are assumed to be unknown to them, i.e.,
they entered the repository after the caller decided which packs
should be kept and which should be discarded.
Since we do not want to include objects in these "unknown" packs
(because we don't know which of their objects are or aren't
reachable), these are also marked as kept in-core.
- Then, we enumerate all objects in the repository, and add them to
our packing list if they do not appear in an in-core kept pack.
This results in a new cruft pack which contains all known objects that
aren't included in the kept packs. When the kept pack is the result of
`git repack -A`, the resulting pack contains all unreachable objects.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will implement and test support for writing a
cruft pack via a special mode of `git pack-objects`. To make sure that
objects are written with the correct timestamps, and a new test-tool
that can dump the object names and corresponding timestamps from a given
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote -v" now shows the list-objects-filter used during
fetching from the remote, if available.
* ac/remote-v-with-object-list-filters:
builtin/remote.c: teach `-v` to list filters for promisor remotes
With a recent update to refuse access to repositories of other
people by default, "sudo make install" and "sudo git describe"
stopped working. This series intends to loosen it while keeping
the safety.
* cb/path-owner-check-with-sudo:
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
"git -c branch.autosetupmerge=simple branch $A $B" will set the $B
as $A's upstream only when $A and $B shares the same name, and "git
-c push.default=simple" on branch $A would push to update the
branch $A at the remote $B came from. Also more places use the
sole remote, if exists, before defaulting to 'origin'.
* tk/simple-autosetupmerge:
push: new config option "push.autoSetupRemote" supports "simple" push
push: default to single remote even when not named origin
branch: new autosetupmerge option 'simple' for matching branches
"git fetch --recurse-submodules" from multiple remotes (either from
a remote group, or "--all") used to make one extra "git fetch" in
the submodules, which has been corrected.
* jc/avoid-redundant-submodule-fetch:
fetch: do not run a redundant fetch from submodule
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
A bit of test framework fixes with a few fixes to issues found by
valgrind.
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
When modifying the sparse-checkout definition, the sparse-checkout
builtin calls update_sparsity() to modify the SKIP_WORKTREE bits of all
cache entries in the index. Before, we needed the index to be fully
expanded in order to ensure we had the full list of files necessary that
match the new patterns.
Insert a call to reset_sparse_directories() that expands sparse
directories that are within the new pattern list, but only far enough
that every necessary file path now exists as a cache entry. The
remaining logic within update_sparsity() will modify the SKIP_WORKTREE
bits appropriately.
This allows us to disable command_requires_full_index within the
sparse-checkout builtin. Add tests that demonstrate that we are not
expanding to a full index unnecessarily.
We can see the improved performance in the p2000 test script:
Test HEAD~1 HEAD
------------------------------------------------------------------------
2000.24: git ... (sparse-v3) 2.14(1.55+0.58) 1.57(1.03+0.53) -26.6%
2000.25: git ... (sparse-v4) 2.20(1.62+0.57) 1.58(0.98+0.59) -28.2%
These reductions of 26-28% are small compared to most examples, but the
time is dominated by writing a new copy of the base repository to the
worktree and then deleting it again. The fact that the previous index
expansion was such a large portion of the time is telling how important
it is to complete this sparse index integration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout builtin is almost completely integrated with the
sparse index, allowing the sparse-checkout boundary to be modified
without expanding a sparse index to a full one. Add a test to
p2000-sparse-operations.sh that adds a directory to the sparse-checkout
definition, then removes it. Using both operations is important to
ensure that the operation is doing the same work in each repetition as
well as leaving the test repo in a good state for later tests.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'sparse-index contents' test checks that the sparse index has the
correct set of sparse directories in the index after modifying the cone
mode patterns using 'git sparse-checkout set'. Add to the coverage here
by adding more complicated scenarios that were not previously tested.
In order to check paths that do not exist at HEAD, we need to modify the
test_sparse_checkout_set helper slightly:
1. Add the --skip-checks argument to the 'set' command to avoid failures
when passing paths that do not exist at HEAD.
2. When looking for the non-existence of sparse directories for the
paths in $CONE_DIRS, allow the rev-list command to fail because the
path does not exist at HEAD.
This allows us to add some interesting test cases.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before expanding this test with more involved cases, first extract the
repeated logic into a new test_sparse_checkout_set helper. This helper
checks that 'git sparse-checkout set ...' succeeds and then verifies
that certain directories have sparse directory entries in the sparse
index. It also verifies that the in-cone directories are _not_ sparse
directory entries in the sparse index.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to call that function already before printing the final verdict.
However, now that we added grouping to the GitHub workflow output, we
will want to include even that part in the collapsible group for that
test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to mark up the test case preamble when presenting test output in
Git's GitHub workflow. Let's suppress the non-marked-up version in that
case. Any information it would contain is included in the marked-up
variant already.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most instances, looking at the log of failed test cases is enough to
identify the problem.
In some (rare?) instances, a previous test case that was marked as
successful actually has information pertaining to a later test case that
fails.
To allow the page to load relatively quickly, let's only show the logs
of the failed test cases to be shown. The full logs are available for
download as artifacts, should a deeper investigation become necessary.
Co-authored-by: Victoria Dye <vdye@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands exist to spruce up the output in GitHub workflows:
https://docs.github.com/en/actions/learn-github-actions/workflow-commands-for-github-actions
In addition to the `::group::<label>`/`::endgroup::` commands (which we
already use to structure the output of the build step better), we also
use `::error::`/`::notice::` to draw the attention to test failures and
to test cases that were expected to fail but didn't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test case's output, we do want newline characters, but in the XML
attributes we do not want them.
However, the `xml_attr_encode` function always adds a Line Feed at the
end (which are then encoded as `
`, even for XML attributes.
This seems not to faze Azure Pipelines' XML parser, but it still is
incorrect, so let's fix it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code writing JUnit XML is interspersed directly with all the code in
`t/test-lib.sh`, and it is therefore not only ill-separated, but
introducing yet another output format would make the situation even
worse.
Let's introduce an abstraction layer by hiding the JUnit XML code behind
four new functions that are supposed to be called before and after each
test and test case.
This is not just an academic exercise, refactoring for refactoring's
sake. We _actually_ want to introduce such a new output format, to
make it substantially easier to diagnose test failures in our GitHub
workflow, therefore we do need this refactoring.
This commit is best viewed with `git show --color-moved
--color-moved-ws=allow-indentation-change <commit>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show :<path>" learned to work better with the sparse-index
feature.
* ds/sparse-colon-path:
rev-parse: integrate with sparse index
object-name: diagnose trees in index properly
object-name: reject trees found in the index
show: integrate with the sparse index
t1092: add compatibility tests for 'git show'
Teach "git stash" to work better with sparse index entries.
* vd/sparse-stash:
unpack-trees: preserve index sparsity
stash: apply stash using 'merge_ort_nonrecursive()'
read-cache: set sparsity when index is new
sparse-index: expose 'is_sparse_index_allowed()'
stash: integrate with sparse index
stash: expand sparse-checkout compatibility testing
"git bisect" was too silent before it is ready to start computing
the actual bisection, which has been corrected.
* cd/bisect-messages-from-pre-flight-states:
bisect: output bisect setup status in bisect log
bisect: output state before we are ready to compute bisection
"git pull" without "--recurse-submodules=<arg>" made
submodule.recurse take precedence over fetch.recurseSubmodules by
mistake, which has been corrected.
* gc/pull-recurse-submodules:
pull: do not let submodule.recurse override fetch.recurseSubmodules
"git log --since=X" will stop traversal upon seeing a commit that
is older than X, but there may be commits behind it that is younger
than X when the commit was created with a faulty clock. A new
option is added to keep digging without stopping, and instead
filter out commits with timestamp older than X.
* mv/log-since-as-filter:
log: "--since-as-filter" option is a non-terminating "--since" variant
The temporary files fed to external diff command are now generated
inside a new temporary directory under the same basename.
* rs/external-diff-tempfile:
diff: use mks_tempfile_dt()
tempfile: add mks_tempfile_dt()
New tests for the safe.directory mechanism.
* sg/safe-directory-tests-and-docs:
safe.directory: document and check that it's ignored in the environment
t0033-safe-directory: check when 'safe.directory' is ignored
t0033-safe-directory: check the error message without matching the trash dir
The previous patch demonstrates a scenario where the list of packs
written by `pack-objects` (and stored in the `names` string_list) is
out-of-order, and can thus cause us to delete packs we shouldn't.
This patch resolves that bug by ensuring that `names` is sorted in all
cases, not just when
delete_redundant && pack_everything & ALL_INTO_ONE
is true.
Because we did sort `names` in that case (which, prior to `--geometric`
repacks, was the only time we would actually delete packs, this is only
a bug for `--geometric` repacks.
It would be sufficient to only sort `names` when `delete_redundant` is
set to a non-zero value. But sorting a small list of strings is cheap,
and it is defensive against future calls to `string_list_has_string()`
on this list.
Co-discovered-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a `--geometric=<d>` repack, `git repack` determines a
splitting point among packs ordered by their object count such that:
- each pack above the split has at least `<d>` times as many objects
as the next-largest pack by object count, and
- the first pack above the split has at least `<d>` times as many
object as the sum of all packs below the split line combined
`git repack` then creates a pack containing all of the objects contained
in packs below the split line by running `git pack-objects
--stdin-packs` underneath. Once packs are moved into place, then any
packs below the split line are removed, since their objects were just
combined into a new pack.
But `git repack` tries to be careful to avoid removing a pack that it
just wrote, by checking:
struct packed_git *p = geometry->pack[i];
if (string_list_has_string(&names, hash_to_hex(p->hash)))
continue;
in the `delete_redundant` and `geometric` conditional towards the end of
`cmd_repack`.
But it's possible to trick `git repack` into not recognizing a pack that
it just wrote when `names` is out-of-order (which violates
`string_list_has_string()`'s assumption that the list is sorted and thus
binary search-able).
When this happens in just the right circumstances, it is possible to
remove a pack that we just wrote, leading to object corruption.
Luckily, this is quite difficult to provoke in practice (for a couple of
reasons):
- we ordinarily write just one pack, so `names` usually contains just
one entry, and is thus sorted
- when we do write more than one pack (e.g., due to `--max-pack-size`)
we have to: (a) write a pack identical to one that already
exists, (b) have that pack be below the split line, and (c) have
the set of packs written by `pack-objects` occur in an order which
tricks `string_list_has_string()`.
Demonstrate the above scenario in a failing test, which causes `git
repack --geometric` to write a pack which occurs below the split line,
_and_ fail to recognize that it wrote that pack.
The following patch will fix this bug.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'repack' to ignore packs named on the command line with the
'--keep-pack' option. Specifically, modify 'init_pack_geometry()' to treat
command line-kept packs the same way it treats packs with an on-disk '.keep'
file (that is, skip the pack and do not include it in the 'geometry'
structure).
Without this handling, a '--keep-pack' pack would be included in the
'geometry' structure. If the pack is *before* the geometry split line (with
at least one other pack and/or loose objects present), 'repack' assumes the
pack's contents are "rolled up" into another pack via 'pack-objects'.
However, because the internally-invoked 'pack-objects' properly excludes
'--keep-pack' objects, any new pack it creates will not contain the kept
objects. Finally, 'repack' deletes the '--keep-pack' as "redundant" (since
it assumes 'pack-objects' created a new pack with its contents), resulting
in possible object loss and repository corruption.
Add a test ensuring that '--keep-pack' packs are now appropriately handled.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do make sure that an attempt to merge with various forms of local
changes will "fail", but the point of stopping the merge is so that
we refrain from discarding uncommitted local changes that could be
precious. Add a few more checks for each case to make sure the
local changes are left intact.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 7dce19d3 (fetch/pull: Add the --recurse-submodules option,
2010-11-12) introduced the "--recurse-submodule" option, the
approach taken was to perform fetches in submodules only once, after
all the main fetching (it may usually be a fetch from a single
remote, but it could be fetching from a group of remotes using
fetch_multiple()) succeeded. Later we added "--all" to fetch from
all defined remotes, which complicated things even more.
If your project has a submodule, and you try to run "git fetch
--recurse-submodule --all", you'd see a fetch for the top-level,
which invokes another fetch for the submodule, followed by another
fetch for the same submodule. All but the last fetch for the
submodule come from a "git fetch --recurse-submodules" subprocess
that is spawned via the fetch_multiple() interface for the remotes,
and the last fetch comes from the code at the end.
Because recursive fetching from submodules is done in each fetch for
the top-level in fetch_multiple(), the last fetch in the submodule
is redundant. It only matters when fetch_one() interacts with a
single remote at the top-level.
While we are at it, there is one optimization that exists in dealing
with a group of remote, but is missing when "--all" is used. In the
former, when the group turns out to be a group of one, instead of
spawning "git fetch" as a subprocess via the fetch_multiple()
interface, we use the normal fetch_one() code path. Do the same
when handing "--all", if it turns out that we have only one remote
defined.
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Libcurl has a CURLOPT_RESOLVE easy option that allows
the result of hostname resolution in the following
format to be passed:
[+]HOST:PORT:ADDRESS[,ADDRESS]
This way, redirects and everything operating against the
HOST+PORT will use the provided ADDRESS(s).
The following format is also allowed to stop using
hostname resolutions that have already been passed:
-HOST:PORT
See https://curl.se/libcurl/c/CURLOPT_RESOLVE.html for
more details.
Let's add a corresponding "http.curloptResolve" config
option that takes advantage of CURLOPT_RESOLVE.
Each value configured for the "http.curloptResolve" key
is passed "as is" to libcurl through CURLOPT_RESOLVE, so
it should be in one of the above 2 formats. This keeps
the implementation simple and makes us consistent with
libcurl's CURLOPT_RESOLVE, and with curl's corresponding
`--resolve` command line option.
The implementation uses CURLOPT_RESOLVE only in
get_active_slot() which is called by all the HTTP
request sending functions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a support library that provides one function that can be used
to run a "scriplet" of commands through sudo and that helps invoking
sudo in the slightly awkward way that is required to ensure it doesn't
block the call (if shell was allowed as tested in the prerequisite)
and it doesn't run the command through a different shell than the one
we intended.
Add additional negative tests as suggested by Junio and that use a
new workspace that is owned by root.
Document a regression that was introduced by previous commits where
root won't be able anymore to access directories they own unless
SUDO_UID is removed from their environment.
The tests document additional ways that this new restriction could
be worked around and the documentation explains why it might be instead
considered a feature, but a "fix" is planned for a future change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bdc77d1d68 (Add a function to determine whether a path is owned by the
current user, 2022-03-02) checks for the effective uid of the running
process using geteuid() but didn't account for cases where that user was
root (because git was invoked through sudo or a compatible tool) and the
original uid that repository trusted for its config was no longer known,
therefore failing the following otherwise safe call:
guy@renard ~/Software/uncrustify $ sudo git describe --always --dirty
[sudo] password for guy:
fatal: unsafe repository ('/home/guy/Software/uncrustify' is owned by someone else)
Attempt to detect those cases by using the environment variables that
those tools create to keep track of the original user id, and do the
ownership check using that instead.
This assumes the environment the user is running on after going
privileged can't be tampered with, and also adds code to restrict that
the new behavior only applies if running as root, therefore keeping the
most common case, which runs unprivileged, from changing, but because of
that, it will miss cases where sudo (or an equivalent) was used to change
to another unprivileged user or where the equivalent tool used to raise
privileges didn't track the original id in a sudo compatible way.
Because of compatibility with sudo, the code assumes that uid_t is an
unsigned integer type (which is not required by the standard) but is used
that way in their codebase to generate SUDO_UID. In systems where uid_t
is signed, sudo might be also patched to NOT be unsigned and that might
be able to trigger an edge case and a bug (as described in the code), but
it is considered unlikely to happen and even if it does, the code would
just mostly fail safely, so there was no attempt either to detect it or
prevent it by the code, which is something that might change in the future,
based on expected user feedback.
Reported-by: Guy Maurel <guy.j@maurel.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Randall Becker <rsbecker@nexbridge.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally reported after release of v2.35.2 (and other maint branches)
for CVE-2022-24765 and blocking otherwise harmless commands that were
done using sudo in a repository that was owned by the user.
Add a new test script with very basic support to allow running git
commands through sudo, so a reproduction could be implemented and that
uses only `git status` as a proxy of the issue reported.
Note that because of the way sudo interacts with the system, a much
more complete integration with the test framework will require a lot
more work and that was therefore intentionally punted for now.
The current implementation requires the execution of a special cleanup
function which should always be kept as the last "test" or otherwise
the standard cleanup functions will fail because they can't remove
the root owned directories that are used. This also means that if
failures are found while running, the specifics of the failure might
not be kept for further debugging and if the test was interrupted, it
will be necessary to clean the working directory manually before
restarting by running:
$ sudo rm -rf trash\ directory.t0034-root-safe-directory/
The test file also uses at least one initial "setup" test that creates
a parallel execution directory under the "root" sub directory, which
should be used as top level directory for all repositories that are
used in this test file. Unlike all other tests the repository provided
by the test framework should go unused.
Special care should be taken when invoking commands through sudo, since
the environment is otherwise independent from what the test framework
setup and might have changed the values for HOME, SHELL and dropped
several relevant environment variables for your test. Indeed `git status`
was used as a proxy because it doesn't even require commits in the
repository to work and usually doesn't require much from the environment
to run, but a future patch will add calls to `git init` and that will
fail to honor the default branch name, unless that setting is NOT
provided through an environment variable (which means even a CI run
could fail that test if enabled incorrectly).
A new SUDO prerequisite is provided that does some sanity checking
to make sure the sudo command that will be used allows for passwordless
execution as root without restrictions and doesn't mess with git's
execution path. This matches what is provided by the macOS agents that
are used as part of GitHub actions and probably nowhere else.
Most of those characteristics make this test mostly only suitable for
CI, but it might be executed locally if special care is taken to provide
for all of them in the local configuration and maybe making use of the
sudo credential cache by first invoking sudo, entering your password if
needed, and then invoking the test with:
$ GIT_TEST_ALLOW_SUDO=YES ./t0034-root-safe-directory.sh
If it fails to run, then it means your local setup wouldn't work for the
test because of the configuration sudo has or other system settings, and
things that might help are to comment out sudo's secure_path config, and
make sure that the account you are using has no restrictions on the
commands it can run through sudo, just like is provided for the user in
the CI.
For example (assuming a username of marta for you) something probably
similar to the following entry in your /etc/sudoers (or equivalent) file:
marta ALL=(ALL:ALL) NOPASSWD: ALL
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4c28e4ada0 (commit: die before asking to edit the log
message, 2010-12-20), we have been "leaking" the "author_ident" when
prepare_to_commit() fails. Instead of returning from right there,
introduce an exit status variable and jump to the clean-up label
at the end.
Instead of explicitly releasing the resource with strbuf_release(),
mark the variable with UNLEAK() at the end, together with two other
variables that are already marked as such. If this were in a
utility function that is called number of times, but these are
different, we should explicitly release resources that grow
proportionally to the size of the problem being solved, but
cmd_commit() is like main() and there is no point in spending extra
cycles to release individual pieces of resource at the end, just
before process exit will clean everything for us for free anyway.
This fixes a leak demonstrated by e.g. "t3505-cherry-pick-empty.sh",
but unfortunately we cannot mark it or other affected tests as passing
now with "TEST_PASSES_SANITIZE_LEAK=true" as we'll need to fix many
other memory leaks before doing so.
Incidentally there are two tests that always passes the leak checker
with or without this change. Mark them as such.
This is based on an earlier patch by Ævar, but takes a different
approach that is more maintainable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my 3b6a8db3b0 (object-file.c: use "enum" return
type for unpack_loose_header(), 2021-10-01) revealed both by running
the test suite with --valgrind, and with the amended "git fsck" test.
In practice this regression in v2.34.0 caused us to claim that we
couldn't parse the header, as opposed to not being able to unpack
it. Before the change in the C code the test_cmp added here would emit:
-error: unable to unpack header of ./objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
+error: unable to parse header of ./objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
I.e. we'd proceed to call parse_loose_header() on the uninitialized
"hdr" value, and it would have been very unlikely for that
uninitialized memory to be a valid git object.
The other callers of unpack_loose_header() were already checking the
enum values exhaustively. See 3b6a8db3b0 and
5848fb11ac (object-file.c: return ULHR_TOO_LONG on "header too long",
2021-10-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip a test added in f1e3df3169 (t: increase test coverage of
signature verification output, 2020-03-04) when running under
valgrind. Due to valgrind's interception of mkstemp() this test will
fail with:
+ pwd
+ TMPDIR=[...]/t/trash directory.t4202-log/bogus git log --show-signature -n1 plain-fail
==7696== VG_(mkstemp): failed to create temp file: [...]/t/trash directory.t4202-log/bogus/valgrind_proc_7696_cmdline_d545ddcf
[... 10 more similar lines omitted ..]
valgrind: Startup or configuration error:
valgrind: Can't create client cmdline file in [...]/t/trash directory.t4202-log/bogus/valgrind_proc_7696_cmdline_6e542d1d
valgrind: Unable to start up properly. Giving up.
error: last command exited with $?=1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in b7d11a0f5d (tests: exercise the RUNTIME_PREFIX
feature, 2021-07-24) where tests that want to set up and test a "git"
wrapper in $PATH conflicted with the t/bin/valgrind wrapper(s) doing
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in "git pull" where `submodule.recurse` is preferred over
`fetch.recurseSubmodules` when performing a fetch
(Documentation/config/fetch.txt says that `fetch.recurseSubmodules`
should be preferred.). Do this by passing the value of the
"--recurse-submodules" CLI option to the underlying fetch, instead of
passing a value that combines the CLI option and config variables.
In other words, this bug occurred because builtin/pull.c is conflating
two similar-sounding, but different concepts:
- Whether "git pull" itself should care about submodules e.g. whether it
should update the submodule worktrees after performing a merge.
- The value of "--recurse-submodules" to pass to the underlying "git
fetch".
Thus, when `submodule.recurse` is set, the underlying "git fetch" gets
invoked with "--recurse-submodules[=value]", overriding the value of
`fetch.recurseSubmodules`.
An alternative (and more obvious) approach to fix the bug would be to
teach "git pull" to understand `fetch.recurseSubmodules`, but the
proposed solution works better because:
- We don't maintain two identical config-parsing implementions in "git
pull" and "git fetch".
- It works better with other commands invoked by "git pull" e.g. "git
merge" won't accidentally respect `fetch.recurseSubmodules`.
Reported-by: Huang Zou <huang.zou@schrodinger.com>
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
This allows seeing the current intermediate status without adding a new
good or bad commit:
$ git bisect log | tail -1
# status: waiting for bad commit, 1 good commit known
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 73c6de06af ("bisect: don't use invalid oid as rev when
starting") changes the behaviour of `git bisect` to consider invalid
oids as pathspecs again, as in the old shell implementation.
While that behaviour may be desirable, it can also cause confusion. For
example, while bisecting in a particular repo I encountered this:
$ git bisect start d93ff48803f0 v6.3
$
...which led to me sitting for a few moments, wondering why there's no
printout stating the first rev to check.
It turns out that the tag was actually "6.3", not "v6.3", and thus the
bisect was still silently started with only a bad rev, because
d93ff48803f0 was a valid oid and "v6.3" was silently considered to be a
pathspec.
While this behaviour may be desirable, it can be confusing, especially
with different repo conventions either using or not using "v" before
release names, or when a branch name or tag is simply misspelled on the
command line.
In order to avoid situations like this, make it more clear what we're
waiting for:
$ git bisect start d93ff48803f0 v6.3
status: waiting for good commit(s), bad commit known
We already have good output once the bisect process has begun in
earnest, so we don't need to do anything more there.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The progress meter of "git blame" was showing incorrect numbers
when processing only parts of the file.
* ea/progress-partial-blame:
blame: report correct number of lines in progress when using ranges
Reimplement "vimdiff[123]" mergetool drivers with a more generic
layout mechanism.
* fr/vimdiff-layout:
mergetools: add description to all diff/merge tools
vimdiff: add tool documentation
vimdiff: integrate layout tests in the unit tests framework ('t' folder)
vimdiff: new implementation with layout support
The performance of the "untracked cache" feature has been improved
when "--untracked-files=<mode>" and "status.showUntrackedFiles"
are combined.
* tk/untracked-cache-with-uall:
untracked-cache: support '--untracked-files=all' if configured
untracked-cache: test untracked-cache-bypassing behavior with -uall
When unpacking trees, set the default sparsity of the resultant index based
on repo settings and 'is_sparse_index_allowed()'.
Normally, when executing 'unpack_trees', the output index is marked sparse
when (and only when) it unpacks a sparse directory. However, an index may be
"sparse" even if it contains no sparse directories - when all files fall
inside the sparse-checkout definition or otherwise have SKIP_WORKTREE
disabled. Therefore, the output index may be marked "full" even when it is
"sparse", resulting in unnecessary 'ensure_full_index' calls when writing to
disk. Avoid this by setting the "default" index sparsity to match what is
expected for the repository.
As a consequence of this fix, the (non-merge) 'read-tree' performed when
applying a stash with untracked files no longer expands the index. Update
the corresponding test in 't1092'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'stash' to use 'merge_ort_nonrecursive()' to apply a stash to the
current working tree. When 'git stash apply' was converted from its shell
script implementation to a builtin in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25), 'merge_recursive_generic()' was used to merge a stash
into the working tree as part of 'git stash (apply|pop)'. However, with the
single merge base used in 'do_apply_stash()', the commit wrapping done by
'merge_recursive_generic()' is not only unnecessary, but misleading (the
*real* merge base is labeled "constructed merge base"). Therefore, a
non-recursive merge of the working tree, stashed tree, and stash base tree
is more appropriate.
There are two options for a non-recursive merge-then-update-worktree
function: 'merge_trees()' and 'merge_ort_nonrecursive()'. Use
'merge_ort_nonrecursive()' to align with the default merge strategy used by
'git merge' (6a5fb96672 (Change default merge backend from recursive to ort,
2021-08-04)) and, because merge-ort does not operate in-place on the index,
avoid unnecessary index expansion. Update tests in 't1092' verifying index
expansion for 'git stash' accordingly.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index read in 'do_read_index()' does not exist on-disk, mark the
index "sparse" if the executing command does not require a full index and
sparse index is otherwise enabled.
Some commands (such as 'git stash -u') implicitly create a new index (when
the 'GIT_INDEX_FILE' variable points to a non-existent file) and perform
some operation on it. However, when this index is created, it isn't created
with the same sparsity settings as the repo index. As a result, while these
indexes may be sparse during the operation, they are always expanded before
being written to disk. We can avoid that expansion by defaulting the index
to "sparse", in which case it will only be expanded if the full index is
needed.
Note that the function 'set_new_index_sparsity()' is created despite having
only a single caller because additional callers will be added in a
subsequent patch.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable sparse index in 'git stash' by disabling
'command_requires_full_index'.
With sparse index enabled, some subcommands of 'stash' work without
expanding the index, e.g., 'git stash', 'git stash list', 'git stash drop',
etc. Others ensure the index is expanded either directly (as in the case of
'git stash [pop|apply]', where the call to 'merge_recursive_generic()' in
'do_apply_stash()' triggers the expansion), or in a command called
internally by stash (e.g., 'git update-index' in 'git stash -u'). So, in
addition to enabling sparse index, add tests to 't1092' demonstrating which
variants of 'git stash' expand the index, and which do not.
Finally, add the option to skip writing 'untracked.txt' in
'ensure_not_expanded', and use that option to successfully apply stashed
untracked files without a conflict in 'untracked.txt'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests verifying expected 'git stash' behavior in
't1092-sparse-checkout-compatibility'. These cases establish the expected
behavior of 'git stash' in a sparse-checkout and verify consistency both
with and without a sparse index. Although no sparse index compatibility has
been integrated into 'git stash' yet, the tests are all 'expect_success' -
we don't want the cone-mode sparse-checkout behavior to change depending on
whether it is using a sparse index or not. Therefore, we expect these tests
to continue passing once sparse index is integrated with 'git stash'.
Additionally, add performance test cases for 'git stash' both with and
without untracked files. Note that, unlike the other tests in
'p2000-sparse-operations.sh', the tests added for 'stash' are combination
operations. This is done to ensure the stash/unstash is not blocked by the
modification of '$SPARSE_CONE/a' performed as part of 'test_perf_on_all'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git remote -v` (`--verbose`) lists down the names of remotes along with
their URLs. It would be beneficial for users to also specify the filter
types for promisor remotes. Something like this -
origin remote-url (fetch) [blob:none]
origin remote-url (push)
Teach `git remote -v` to also specify the filters for promisor remotes.
Closes: https://github.com/gitgitgadget/git/issues/1211
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
source: <c36896a1-6247-123b-4fa3-b7eb24af1897@web.de>
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
source: <2c988c7b-0efe-4222-4a43-8124fe1a9da6@web.de>
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
source: <xmqqo80j87g0.fsf_-_@gitster.g>
* jc/show-pathspec-fix:
2.36 show regression fix
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <xmqq7d7bsu2n.fsf@gitster.g>
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <pull.1258.v2.git.git.1650890741430.gitgitgadget@gmail.com>
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
git-p4 is designed to run correctly under python2.7 and python3, but
its functional behavior wrt importing user-entered text differs across
these environments:
Under python2, git-p4 "naively" writes the Perforce bytestream into git
metadata (and does not set an "encoding" header on the commits); this
means that any non-utf-8 byte sequences end up creating invalidly-encoded
commit metadata in git.
Under python3, git-p4 attempts to decode the Perforce bytestream as utf-8
data, and fails badly (with an unhelpful error) when non-utf-8 data is
encountered.
Perforce clients (especially p4v) encourage user entry of changelist
descriptions (and user full names) in OS-local encoding, and store the
resulting bytestream to the server unmodified - such that different
clients can end up creating mutually-unintelligible messages. The most
common inconsistency, in many Perforce environments, is likely to be utf-8
(typical in linux) vs cp-1252 (typical in windows).
Make the changelist-description- and user-fullname-handling code
python-runtime-agnostic, introducing three "strategies" selectable via
config:
- 'passthrough', behaving as previously under python2,
- 'strict', behaving as previously under python3, and
- 'fallback', favoring utf-8 but supporting a secondary encoding when
utf-8 decoding fails, and finally escaping high-range bytes if the
decoding with the secondary encoding also fails.
Keep the python2 default behavior as-is ('legacy' strategy), but switch
the python3 default strategy to 'fallback' with default fallback encoding
'cp1252'.
Also include tests exercising these encoding strategies, documentation for
the new config, and improve the user-facing error messages when decoding
does fail.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
* jc/show-pathspec-fix:
2.36 show regression fix
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
