If $HOME is unset (as in some automated build situations),
currently
git config --path path.home "~"
git config --path --get path.home
segfaults. Error out with
Failed to expand user dir in: '~/'
instead.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From api-parse-options.txt:
`description` is a short string to describe the effect of the option.
It shall begin with a lower-case letter and a full stop (`.`) shall be
omitted at the end.
It also makes it less confusing if the argument is 'no.' or 'no'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message is especially confusing when "git fetch" is ran from "git
pull", for users not aware of "git fetch". The new message makes it clear
that "fetch" means "fetch new revisions", and gives hint on the solution.
We don't add a advice.* configuration option since this message doesn't
appear in normal use, and shouldn't disturb advanced users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manpage was added in 1ed6f2c (Documentation: gitrevisions,
2010-07-05), but since it does not have a corresponding git command,
it needs an exception for check-docs.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8b1fa77 (Allow passing of configuration parameters in the command
line, 2010-03-26) forgot the closing ']' for the -c option.
While we're there, also rewrap. Instead of folding the last two lines
together, try to highlight that COMMAND is required by starting a line
with it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention the effects of the receive.deny* family of options for the
"remote rejected" case. While there, also split up the explanation
into an easier-to-parse list format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option was introduced by 747ca24 (receive-pack:
receive.denyDeleteCurrent, 2009-02-08) but never documented.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NULL sentinel argument to the execl*() family of calls must be
cast to (char *), as otherwise:
- platforms where NULL is just 0 (not (void *)) would pass an int
- (admittedly esoteric) platforms where NULL is (void *)0 and (void *)
and (char *) have different memory layouts would pass the wrong kind
of pointer
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional configuration steps, the documentation build on Cygwin
fails because the XML catalog is missing required rewrites for certain
docbook resources.
This patch documents the required configuration.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, the chrome browser is named google-chrome. We add
support for this case.
Signed-off-by: Nathan W. Panike <nathan.panike@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
This prevents a buffer overrun that could otherwise be triggered by
creating a file called '.git' with contents
gitdir: (something really long)
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Arch Linux, the executable for the Apache HTTP server keeps
the 'httpd' name and is not named 'apache2'. The path to the
server modules also contains 'httpd' rather than 'apache2'.
Remove some of these assumptions and add the httpd name in where
it may be required. Finally, make some slight style adjustments
to the code we are touching to make it fit the style of the rest
of the script.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
We were passing the non-existent GIT_EXEC_DIR through instead of the real
GIT_EXEC_PATH. In addition, these weren't being passed at all for CGI (non
mod_perl) execution so get them included there as well.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'CustomLog' is provided by mod_log_config so we need to include the module
in our generated config. This was added in d94775e1f9.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prevents a buffer overrun that could otherwise be triggered by
creating a file called '.git' with contents
gitdir: (something really long)
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct responses to a D and a T line in .git/objects/info/packs
are the same, so combine their case arms. In both cases we already
‘goto’ out of the switch so while at it, remove a redundant ‘break’
to avoid yet another line of code.
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Reviewed-by: Jonathan Nieder <jrnieder <at> gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the git add options were listed in the synopsis until the
--ignore-missing option was added. Change that so that the git add
documentation now has the complete listing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule add no longer implicitly adds with --force. Remove
references to the old functionality in the documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git mergetool' creates '*.orig' backup files in its
default configuration. Mention this in its documentation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently using the Storable module during global destruction is
unsafe - there is a bug which can cause segmentation faults:
http://rt.cpan.org/Public/Bug/Display.html?id=36087http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482355
The persistent memoization support introduced in commit 8bff7c538
relied on global destruction to write cached data, which was leading
to segfaults in some Perl configurations. Calling Memoize::unmemoize
in the END block forces the cache writeout to be performed earlier,
thus avoiding the bug.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The svn-fe tool takes a Subversion dump file as input and produces
a fast-import stream as output. This can be useful as a low-level
tool in building other importers, or for debugging the vcs-svn
library.
make svn-fe
make svn-fe.1
to test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we tried to make sure that the trees we get are what A...B
syntax produced, by checking that earlier ones are all marked
uninteresting (which has to be true as they are merge bases),
there are two remaining ones that are interesting, and they are
marked as non-symmetric-left and symmetric-left respectively.
The "the last two must be interesting" condition is however wrong when one
is an ancestor of the other between A and B (i.e. fast-forward). In such
a case, one of them is marked uninteresting.
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
