Add tests for pull --verify-signatures with untrusted, bad and no
signatures. Previously the only test for --verify-signatures was to
make sure that pull --rebase --verify-signatures result in a warning
(t5520-pull.sh).
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge --verify-signatures can be used to verify that the tip commit
of the branch being merged in is properly signed, but it's cumbersome to
have to specify that every time.
Add a configuration option that enables this behaviour by default, which
can be overridden by --no-verify-signatures.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write some docs for functions in pretty.h.
Take it as a first draft, they would be changed later.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have tests for --relative, but they currently only test when
a prefix has been provided. This fails to test the case where --relative
by itself should use the current directory as the prefix.
Teach the check_$type functions to take a directory argument to indicate
which subdirectory to run the git commands in. Add a new test which uses
this to test --relative without a prefix value.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify diff option parsing using
skip_to_optional_arg_default().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify diff option parsing using skip_to_optional_arg().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify index-pack option parsing using
skip_to_optional_arg().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often accept both a "--key" option and a "--key=<val>" option.
These options currently are parsed using something like:
if (!strcmp(arg, "--key")) {
/* do something */
} else if (skip_prefix(arg, "--key=", &arg)) {
/* do something with arg */
}
which is a bit cumbersome compared to just:
if (skip_to_optional_arg(arg, "--key", &arg)) {
/* do something with arg */
}
This also introduces skip_to_optional_arg_default() for the few
cases where something different should be done when the first
argument is exactly "--key" than when it is exactly "--key=".
In general it is better for UI consistency and simplicity if
"--key" and "--key=" do the same thing though, so that using
skip_to_optional_arg() should be encouraged compared to
skip_to_optional_arg_default().
Note that these functions can be used to parse any "key=value"
string where "key" is also considered as valid, not just
command line options.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by
744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by
744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transfer ownership of detached strbufs to string_lists of the
duplicating variety by calling string_list_append_nodup() instead of
string_list_append() to avoid duplicating and then leaking the buffer.
While at it make sure to release the string_list when done;
push_refs_with_export() already does that.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new MIX tests don't pass under Windows, adapt them
to use the correct native line ending.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change 'he' to 'them' to be more neutral in "gitworkflows.txt".
Signed-off-by: Matthieu Moy <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the names of the identifiers in decorate.h, document them, and
add an example of how to use these functions.
The example is compiled and run as part of the test suite.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You may want to run the test suite with a different shell
than you use to build Git. For instance, you may build with
SHELL_PATH=/bin/sh (because it's faster, or it's what you
expect to exist on systems where the build will be used) but
want to run the test suite with bash (e.g., since that
allows using "-x" reliably across the whole test suite).
There's currently no good way to do this.
You might think that doing two separate make invocations,
like:
make &&
make -C t SHELL_PATH=/bin/bash
would work. And it _almost_ does. The second make will see
our bash SHELL_PATH, and we'll use that to run the
individual test scripts (or tell prove to use it to do so).
So far so good.
But this breaks down when "--tee" or "--verbose-log" is
used. Those options cause the test script to actually
re-exec itself using $SHELL_PATH. But wait, wouldn't our
second make invocation have set SHELL_PATH correctly in the
environment?
Yes, but test-lib.sh sources GIT-BUILD-OPTIONS, which we
built during the first "make". And that overrides the
environment, giving us the original SHELL_PATH again.
Let's introduce a new variable that lets you specify a
specific shell to be run for the test scripts. Note that we
have to touch both the main and t/ Makefiles, since we have
to record it in GIT-BUILD-OPTIONS in one, and use it in the
latter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-x" tracing option implies "--verbose". This is a
problem when running under a TAP harness like "prove", where
we need to use "--verbose-log" instead. Instead, let's
handle this the same way we do for --valgrind, including the
recent fix from 88c6e9d31c (test-lib: --valgrind should not
override --verbose-log, 2017-09-05). Namely, let's enable
--verbose only when we know there isn't a more specific
verbosity option indicated.
Note that we also have to tweak `want_trace` to turn it on
(previously we just lumped $verbose_log in with $verbose,
but now we don't necessarily auto-set the latter).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
File descriptors 3 and 4 are special in our test suite, as
they link back to the test script's original stdout and
stderr. Normally this isn't something tests need to worry
about: they are free to clobber these descriptors for
sub-commands without affecting the overall script.
But there's one very special thing about descriptor 4: since
d88785e424 (test-lib: set BASH_XTRACEFD automatically,
2016-05-11), we ask bash to output "set -x" output to it by
number. This goes to _any_ descriptor 4, even if it no
longer points to the place it did when we set BASH_XTRACEFD.
But in t5615, we run a shell loop with descriptor 4
redirected. As a result, t5615 works with non-bash shells
even with "-x". And it works with bash without "-x". But the
combination of "bash t5615-alternate-env.sh -x" gets a test
failure (because our "set -x" output pollutes one of the
files).
We can fix this by using any descriptor _except_ the magical
4. So let's switch arbitrarily to using 5/6 in this loop,
not 3/4.
Another alternative is to use a different descriptor for
BASH_XTRACEFD. But picking an unused one turns out to be
hard. Most shells limit us to 9 numbered descriptors. Bash
can handle more, but:
- while the BASH_XTRACEFD is specific to bash, GIT_TRACE=4
has a similar problem, and would affect all shells
- constructs like "999>/dev/null" are synticatically
invalid to non-bash shells. So we have to actually bury
it inside an eval, which creates more complications.
Of the numbers 1-9, you might think that "9" would be less
used than "4". But it's not; many of our scripts use
descriptors 8 and 9 (probably under the assumption that they
are high and therefore unused). The least-used descriptor is
currently "7". We could switch to that, but we're just
trading one magic number for another.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the test suite's "-x" option is used with bash, we end
up seeing cleanup cruft in the output:
$ bash t0001-init.sh -x
[...]
++ diff -u expected actual
+ test_eval_ret_=0
+ want_trace
+ test t = t
+ test t = t
+ set +x
ok 42 - re-init from a linked worktree
This ranges from mildly annoying (for a successful test) to
downright confusing (when we say "last command exited with
error", but it's really 5 commands back).
We normally are able to suppress this cleanup. As the
in-code comment explains, we can't convince the shell not to
print it, but we can redirect its stderr elsewhere.
But since d88785e424 (test-lib: set BASH_XTRACEFD
automatically, 2016-05-11), that doesn't hold for bash. It
sends the "set -x" output directly to descriptor 4, not to
stderr.
We can fix this by also redirecting descriptor 4, and
paying close attention to which commands redirected and
which are not (see the updated comment).
Two alternatives I considered and rejected:
- unsetting and setting BASH_XTRACEFD; doing so closes the
descriptor, which we must avoid
- we could keep everything in a single block as before,
redirect 4>/dev/null there, but retain 5>&4 as a copy.
And then selectively restore 4>&5 for commands which
should be allowed to trace. This would work, but the
descriptor swapping seems unnecessarily confusing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b4efea666 (cvsimport: shell-quote variable used in
backticks, 2017-09-11) tried to shell-quote a variable, but
forgot to use the "/g" modifier to apply the quoting to the
whole variable. This means we'd miss any embedded
single-quotes after the first one.
Reported-by: <littlelailo@yahoo.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 84ff053d47 (pretty.c: delimit "%(trailers)" arguments
with ",", 2017-10-01) switched the syntax of the trailers
placeholder, but forgot to update the documentation in
pretty-formats.txt.
There's no need to mention the old syntax; it was never in a
released version of Git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the offset strlen("refs/heads/") to skip
the prefix "refs/heads/" use the skip_prefix() function which
is more communicative and verifies that the string actually
starts with that prefix.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user tries to rename a branch that has a "bad name" (e.g.,
starts with a '-') then we warn them that the misnamed branch has
been renamed "away". A similar message is shown when trying to create
a copy of a misnamed branch even though it doesn't remove the misnamed
branch. This is not correct and may confuse the user.
So, update the warning message shown to be more precise that only a copy
of the misnamed branch has been created. It's better to show the warning
message than not showing it at all as it makes the user aware of the
presence of a misnamed branch.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
39bd6f726 (Allow checkout -B <current-branch> to update the current
branch, 2011-11-26) added 'clobber_head' (now, 'clobber_head_ok')
"before" 'track' as 'track' was closely related 'clobber_head' for
the purpose the commit wanted to achieve. Looking from the perspective
of how the arguments are used it turns out that 'clobber_head' is
more related to 'force' than it is to 'track'.
So, re-order the arguments to keep the related arguments close
to each other.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'create_branch()' was incomplete as it didn't say
what certain parameters were used for. Further a parameter name wasn't
very communicative.
So, add missing documentation for the sake of completeness and easy
reference. Also, rename the concerned parameter to make its name more
communicative.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If other strbuf add functions cause the first allocation and
subsequently encounter an error then they release the memory, restoring
the pristine state of the strbuf. That simplifies error handling for
callers.
Do the same in strbuf_read_once(), and do it also in case no bytes were
read -- which may or may not be an error as well, depending on the
caller.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use string_list_append_nodup() instead of string_list_append() to hand
over ownership of a detached strbuf and thus avoid leaking its memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a graphical GIT_EDITOR is spawned by a Git command that opens
and waits for user input (e.g. "git rebase -i"), then the editor window
might be obscured by other windows. The user might be left staring at
the original Git terminal window without even realizing that s/he needs
to interact with another window before Git can proceed. To this user Git
appears hanging.
Print a message that Git is waiting for editor input in the original
terminal and get rid of it when the editor returns, if the terminal
supports erasing the last line. Also, make sure that our message is
terminated with a whitespace so that any message the editor may show
upon starting up will be kept separate from our message.
Power users might not want to see this message or their editor might
already print such a message (e.g. emacsclient). Allow these users to
suppress the message by disabling the "advice.waitingForEditor" config.
The standard advise() function is not used here as it would always add
a newline which would make deleting the message harder.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since gitfiles were introduced in b44ebb19e (Add platform-independent
.git "symlink", 2008-02-20) the order of checks during .git directory
discovery is: gitfile, gitdir, bare repo. However, that commit did
only partially update the in-code comment describing this order,
missing the last line which still puts gitdir before gitfile.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression was introduced in 557a5998d (submodule: remove
gitmodules_config, 2017-08-03) to how attribute processing was handled
in bare repositories when running the diff-tree command.
By default the attribute system will first try to read ".gitattribute"
files from the working tree and then falls back to reading them from the
index if there isn't a copy checked out in the worktree. Prior to
557a5998d the index was read as a side effect of the call to
'gitmodules_config()' which ensured that the index was already populated
before entering the attribute subsystem.
Since the call to 'gitmodules_config()' was removed the index is no
longer being read so when the attribute system tries to read from the
in-memory index it doesn't find any ".gitattribute" entries effectively
ignoring any configured attributes.
Fix this by explicitly reading the index during the setup of diff-tree.
Reported-by: Ben Boeckel <ben.boeckel@kitware.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any of the files read by __git_eread have \r\n line endings, read
will only strip \n, leaving \r. This results in an ugly prompt, where
instead of
user@pc MINGW64 /path/to/repo (BARE:master)
the last parenthesis is printed over the beginning of the prompt like
)ser@pc MINGW64 /path/to/repo (BARE:master
This patch fixes the issue by changing the internal field separator
variable IFS to $'\r\n' before using the read builtin command.
Note that ANSI-C Quoting/POSIX Quoting ($'...') is supported by bash
as well as zsh, which are the current targets of git-prompt, cf.
contrib/completion/git-prompt.sh.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_eread is used to read a single line of a given file (if it exists)
into a single variable stripping the EOL.
This patch removes the unused capability to split file contents into tokens
by passing multiple variable names. Add a comment and explicitly use $2
instead of misleading $@ as argument to the read builtin command.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move just enough code from trace.c into trace.h header so all code
necessary to determine that trace is disabled could be inlined to
calling functions. Then perform the check if the trace key is
enabled sooner in call chain.
Signed-off-by: Gennady Kupava <gkupava@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh-variant 'simple' introduced earlier broke existing
installations by not passing --port/-4/-6 and not diagnosing an
attempt to pass these as an error. Instead, default to
automatically detect how compatible the GIT_SSH/GIT_SSH_COMMAND is
to OpenSSH convention and then error out an invocation to make it
easier to diagnose connection errors.
* jn/ssh-wrappers:
connect: correct style of C-style comment
ssh: 'simple' variant does not support --port
ssh: 'simple' variant does not support -4/-6
ssh: 'auto' variant to select between 'ssh' and 'simple'
connect: split ssh option computation to its own function
connect: split ssh command line options into separate function
connect: split git:// setup into a separate function
connect: move no_fork fallback to git_tcp_connect
ssh test: make copy_ssh_wrapper_as clean up after itself
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
In addition to "git stash -m message", the command learned to
accept "git stash -mmessage" form.
* ph/stash-save-m-option-fix:
stash: learn to parse -m/--message like commit does
Internaly we use 0{40} as a placeholder object name to signal the
codepath that there is no such object (e.g. the fast-forward check
while "git fetch" stores a new remote-tracking ref says "we know
there is no 'old' thing pointed at by the ref, as we are creating
it anew" by passing 0{40} for the 'old' side), and expect that a
codepath to locate an in-core object to return NULL as a sign that
the object does not exist. A look-up for an object that does not
exist however is quite costly with a repository with large number
of packfiles. This access pattern has been optimized.
* jk/fewer-pack-rescan:
sha1_file: fast-path null sha1 as a missing object
everything_local: use "quick" object existence check
p5551: add a script to test fetch pack-dir rescans
t/perf/lib-pack: use fast-import checkpoint to create packs
p5550: factor out nonsense-pack creation
