Both "git ls-remote -h" and "git grep -h" give short usage help,
like any other Git subcommand, but it is not unreasonable to expect
that the former would behave the same as "git ls-remote --head"
(there is no other sensible behaviour for the latter). The
documentation has been updated in an attempt to clarify this.
* jc/doc-single-h-is-for-help:
Documentation: clarify that `-h` alone stands for `help`
We seem to be getting new users who get confused every 20 months or
so with this "-h consistently wants to give help, but the commands
to which `-h` may feel like a good short-form option want it to mean
something else." compromise.
Let's make sure that the readers know that `git cmd -h` (with no
other arguments) is a way to get usage text, even for commands like
ls-remote and grep.
Also extend the description that is already in gitcli.txt, as it is
clear that users still get confused with the current text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Publicize lore.kernel.org mailing list archive and use URLs
pointing into it to refer to notable messages in the documentation.
* dl/lore-is-the-archive:
doc: replace LKML link with lore.kernel.org
RelNotes: replace Gmane with real Message-IDs
doc: replace MARC links with lore.kernel.org
Since we're now recommending lore.kernel.org, replace marc.info links
with lore.kernel.org.
Although MARC has been around for a long time, nothing lasts forever
(see Gmane). Since MARC uses opaque message identifiers, switching to
lore.kernel.org should be a strict improvement since, even if
lore.kernel.org goes down, the Message-ID will allow future readers to
look up the referenced messages on any other archive.
We leave behind one reference to MARC in the README.md since it's a
perfectly fine mail archive for personal reading, just not for linking
messages for the future.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that --end-of-options is available for any users of
setup_revisions() or parse_options(), which should be effectively
everywhere, we can guide people to use it for all their disambiguating
needs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard for command documentation synopses appears to be:
[...] means optional
<...> means replaceable
[<...>] means both optional and replaceable
So fix a number of doc pages that use incorrect variations of the
above.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time, a 'stash entry' is called a 'stash'. Lets try to make
this more consistent and use 'stash entry' instead.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance "rev-parse --parseopt" mode to help parsing options with
an optional parameter.
* nv/parseopt-opt-arg:
rev-parse --parseopt: add the --stuck-long mode
Use the word 'stuck' instead of 'sticked'
Replace double quotes around literal examples with backticks
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain how '.' can be used to refer to the "current repository"
in the documentation.
* po/dot-url:
doc/cli: make "dot repository" an independent bullet point
config doc: update dot-repository notes
doc: command line interface (cli) dot-repository dwimmery
The way to spell the current repository with a '.' dot is
independent from how the pathspec allows globs expanded by Git.
Make them two separate bullet items in the enumeration.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git cli will accept dot '.' (period) as the relative path
to the current repository. Explain this action.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of references still survive to .git/refs as a tree
of all refs. Fix one in docs, one in a -h message, one in
a -h message quoted in docs.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe the behaviour, but do warn people against taking it too
literally and expect an abbreviation valid today will stay valid
forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
People who are not used to working with shell may intellectually
understand how the command line argument is massaged by the shell
but still have a hard time visualizing the difference between
letting the shell expand fileglobs and having Git see the fileglob
to use as a pathspec.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paragraph to encourage use of "--" in scripts belongs to the
bullet point that describes the behaviour for a command line without
the explicit "--" disambiguation; it is not a supporting explanation
for the entire bulletted list, and it is wrong to make it a separate
paragraph outside the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
A sample "git describe -h" did not match what the program actually says.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We saw this explanation repeated on the mailing list a few times. Even
though the description of individual options to particular commands are
explained in their manual pages, the reason behind choosing which is which
has not been clearly explained in any of the documentation.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a very well established command line convention that old residents
of the git mailing list knew by heart and nobody even thought about
documenting it explicitly, which was not very nice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
