On Windows, all native APIs are Unicode-based. It is impossible to pass
legacy encoded byte arrays to a process via command line or environment
variables. Disable the tests that try to do so.
In t3901, most tests still work if we don't mess up the repository encoding
in setup, so don't switch to ISO-8859-1 on MinGW.
Note that i18n tests that do their encoding tricks via encoded files (such
as t3900) are not affected by this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the command line is a Unicode string, it is not possible to
pass arbitrary bytes to a program. Disable tests that try to do so.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because that does not work in MinGW.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/test-lint-scripts:
t/Makefile: always test all lint targets when running tests
t/Makefile: check helper scripts for non-portable shell commands too
"filter-branch" left an empty single-parent commit that results when
all parents of a merge commit gets mapped to the same commit, even
under "--prune-empty".
* cb/filter-branch-prune-empty-degenerate-merges:
filter-branch: eliminate duplicate mapped parents
Merging changes into a file that ends in an incomplete line made the
last line into a complete one, even when the other branch did not
change anything around the end of file.
* mk/merge-incomplete-files:
git-merge-file: do not add LF at EOF while applying unrelated change
t6023-merge-file.sh: fix and mark as broken invalid tests
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Only the two targets "test-lint-duplicates" and "test-lint-executable" are
currently executed when running the test target. This was done on purpose
when the TEST_LINT variable was added in 81127d74 to avoid twisted shell
scripting by developers only to avoid false positives that might result
from the rather simple minded tests, e.g. test-lint-shell-syntax. But it
looks like it might be better to include all lint tests to help developers
to detect non portable shell constructs before the patch is sent to the
list and reviewed there.
Change the TEST_LINT variable to run all lint test unless the TEST_LINT
variable is overridden. If we hit false positives more often than helping
developers to avoid non-portable code (or add less accurate or slow tests
later) we could still fall back to exclude them like 81127d74 proposed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only the "t[0-9][0-9][0-9][0-9]-*.sh" scripts are tested for
shell incompatibilities using the check-non-portable-shell.pl script. This
makes it easy to miss non-POSIX constructs added to one of the t/*lib*.sh
helper scripts, as they aren't automatically detected.
Fix that by adding a THELPERS variable containing all shell scripts that
aren't tests and add these to the "test-lint-shell-syntax" target too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to a topic that is already in 'master'.
* dt/refs-check-refname-component-sse-fix:
refs: fix valgrind suppression file
refs.c: handle REFNAME_REFSPEC_PATTERN at end of page
Add 'verify-commit' to be used in a way similar to 'verify-tag' is
used. Further work on verifying the mergetags might be needed.
* mg/verify-commit:
t7510: test verify-commit
t7510: exit for loop with test result
verify-commit: scriptable commit signature verification
gpg-interface: provide access to the payload
gpg-interface: provide clear helper for struct signature_check
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add all of the ways in which check_refname_format violates valgrind's
expectations to the valgrind suppression file; remove an assumption about
the call chain of check_refname_format from same.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically there are 3 different parameters controlling how line endings
are handled by Git:
- core.autocrlf
- core.eol
- the "text" attribute in .gitattributes
There are different types of content:
- (1) Files with only LF
- (2) Files with only CRLF
- (3) Files with mixed LF and CRLF
- (4) Files with LF and/or CRLF with CR not followed by LF
- (5) Files which are binary (e.g. have NUL bytes)
Recently the question came up, how files with mixed EOLs are handled by Git
(and libgit2) when they are checked out and core.autocrlf=true.
See
http://git.661346.n2.nabble.com/The-different-EOL-behavior-between-libgit2-based-software-and-official-Git-td7613670.html#a7613801
Add the EXPENSIVE t0027-auto-crlf.sh to test all combination of files
and parameters for both "git add/commit" and "git checkout".
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test files are named one, two and three.
Make it clearer what the tests do and rename them into
LFonly, CRLFonly and LFwithNUL.
After the renaming we can see easier that we may want more test cases
for 2 types of files:
- files which have mixed LF and CRLF line endings,
- files which have mixed LF and CR line endings.
See commit fd6cce9e, "Add per-repository eol normalization" and
"the new safer autocrlf handling" in convert.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --skip" did not work well when it stopped due to a
conflict twice in a row.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple parents of a merge commit get mapped to the same
commit, filter-branch used to pass all instances of the parent
commit to the parent and commit filters and to "git commit-tree" or
"git_commit_non_empty_tree".
This can often happen when extracting a small project from a large
repository; merges can join history with no commits on any branch
which affect the paths being retained. Once the intermediate
commits have been filtered out, all the immediate parents of the
merge commit can end up being mapped to the same commit - either the
original merge-base or an ancestor of it.
"git commit-tree" would display an error but write the commit with
the normalized parents in any case. "git_commit_non_empty_tree"
would fail to notice that the commit being made was in fact a
non-merge commit and would retain it even if a further pass with
"--prune-empty" would discard the commit as empty.
Ensure that duplicate parents are pruned before the parent filter to
make "--prune-empty" idempotent, removing all empty non-merge
commits in a singe pass.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'current-file' does not contain LF at EOF, and change between
'base-file' and 'other-file' does not change any line close to EOF, the
3-way merge should not add LF to EOF. This is what 'diff3 -m' does, and
seems to be a reasonable expectation.
The change which introduced the behavior is cd1d61c44f. It always calls
function xdl_recs_copy() for sides with add_nl == 1. In fact, it looks
like the only case when this is needed is when 2 files are being
union-merged, and they do not have LF at EOF (strictly speaking, the
first of them).
Add tests:
* "merge without conflict (missing LF at EOF, away from change in the
other file)" and "merge does not add LF away of change", to demonstrate
the changed behavior.
* "conflict at EOF without LF resolved by --union", to verify that the
union-merge at the end inerts newline between versions.
* some more tests which I felt like not covering the functionality well
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests "merge without conflict (missing LF at EOF" and "merge result
added missing LF" are meaningless - the first one is identical to
"merge without conflict" and the second compares results of those
identical tests, which are always same.
This has been so since their addition in ba1f5f3537. Probably "new4.txt"
was meant to be used instead of "new2.txt". Unfortunately, the current
merge-file breaks with new4 - conflict is reported. They also fail at
that revision if fixed.
Fix the file reference to "new4.txt" and mark the tests as failing -
they look like legitimate expectations, just not satisfied at time
being.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some subcommands do not want to be aliased because of the side
effects that happens while the definitions of the aliases are looked
up from configuration system.
* nd/init-restore-env:
git potty: restore environments after alias expansion
Recent updates to "git repack" started to duplicate objects that
are in packfiles marked with .keep flag into the new packfile by
mistake.
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
"git show -s" (i.e. show log message only) used to incorrectly emit
an extra blank line after a merge commit.
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
"git diff --find-copies-harder" sometimes pretended as if the mode
bits have changed for paths that are marked with assume-unchanged
bit.
* jk/diff-files-assume-unchanged:
run_diff_files: do not look at uninitialized stat data
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
"git blame" assigned the blame to the copy in the working-tree if
the repository is set to core.autocrlf=input and the file used CRLF
line endings.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
"--ignore-space-change" option of "git apply" ignored the spaces
at the beginning of line too aggressively, which is inconsistent
with the option of the same name "diff" and "git diff" have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
The "%<(10,trunc)%s" pretty format specifier in the log family of
commands is used to truncate the string to a given length (e.g. 10
in the example) with padding to column-align the output, but did
not take into account that number of bytes and number of display
columns are different.
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
This mixes the "git verify-commit" tests in with the "git show
--show-signature" tests, to keep the tests more readable.
The tests already mix in the "call show" tests with the "verify" tests.
So in case of a test beakage, a '-v' run would be needed to reveal the
exact point of breakage anyway.
Additionally, test the actual output of "git verify-commit" and "git
show --show-signature" and compare to "git cat-file".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7510 uses for loops in a subshell, which need to make sure that the test
returns with the appropriate error code from within the loop.
Restructure the loops as the usual && chains with a single point of
"exit 1" at the end of the loop to make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/test-lazy-prereq' (early part):
t3419: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: do not chdir around in the primary test process
t3302: coding style updates
test: turn USR_BIN_TIME into a lazy prerequisite
test: turn EXPENSIVE into a lazy prerequisite
