Recent CI update hides certain failures in test jobs, which has
been corrected.
* js/ci-github-workflow-markup:
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
ci(github): bring back the 'print test failures' step
When GCC produces those helpful errors, we will want to present them in
the GitHub workflow runs in the most helpful manner. To that end, we
want to use workflow commands to render errors and warnings:
https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions
In the previous commit, we ensured that grouping is used for the build
in all jobs, and this allows us to piggy-back onto the `group` function
to transmogrify the output.
Note: If `set -o pipefail` was available, we could do this in a little
more elegant way. But since some of the steps are run using `dash`, we
have to do a little `{ ...; echo $? >exit.status; } | ...` dance.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already do the same when building Git in all the other jobs.
This will allow us to piggy-back on top of grouping to mark up compiler
errors in the next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now shows better information in the GitHub workflow runs when a test
case failed. However, when a test case was implemented incorrectly and
therefore does not even run, nothing is shown.
Let's bring back the step that prints the full logs of the failed tests,
and to improve the user experience, print out an informational message
for readers so that they do not have to know/remember where to see the
full logs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
A workflow change for translators are being proposed.
* jx/l10n-workflow-change:
l10n: Document the new l10n workflow
Makefile: add "po-init" rule to initialize po/XX.po
Makefile: add "po-update" rule to update po/XX.po
po/git.pot: don't check in result of "make pot"
po/git.pot: this is now a generated file
Makefile: remove duplicate and unwanted files in FOUND_SOURCE_FILES
i18n CI: stop allowing non-ASCII source messages in po/git.pot
Makefile: have "make pot" not "reset --hard"
Makefile: generate "po/git.pot" from stable LOCALIZED_C
Makefile: sort source files before feeding to xgettext
"git add -i" was rewritten in C some time ago and has been in
testing; the reimplementation is now exposed to general public by
default.
* js/use-builtin-add-i:
add -i: default to the built-in implementation
t2016: require the PERL prereq only when necessary
In the preceding commit we moved away from using xgettext(1) to both
generate the po/git.pot, and to merge the incrementally generated
po/git.pot+ file as we sourced translations from C, shell and Perl.
Doing it this way, which dates back to my initial
implementation[1][2][3] was conflating two things: With xgettext(1)
the --from-code both controls what encoding is specified in the
po/git.pot's header, and what encoding we allow in source messages.
We don't ever want to allow non-ASCII in *source messages*, and doing
so has hid e.g. a buggy message introduced in
a6226fd772 (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10) from us, we'd warn about it before, but only when running
"make pot", but the operation would still succeed. Now we'll error out
on it when running "make pot".
Since the preceding Makefile changes made this easy: let's add a "make
check-pot" target with the same prerequisites as the "po/git.pot"
target, but without changing the file "po/git.pot". Running it as part
of the "static-analysis" CI target will ensure that we catch any such
issues in the future. E.g.:
$ make check-pot
XGETTEXT .build/pot/po/builtin/submodule--helper.c.po
xgettext: Non-ASCII string at builtin/submodule--helper.c:3381.
Please specify the source encoding through --from-code.
make: *** [.build/pot/po/builtin/submodule--helper.c.po] Error 1
1. cd5513a716 (i18n: Makefile: "pot" target to extract messages
marked for translation, 2011-02-22)
2. adc3b2b276 (Makefile: add xgettext target for *.sh files,
2011-05-14)
3. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The full logs are contained in the `failed-tests-*.zip` artifacts that
are attached to the failed CI run. Since this is not immediately
obvious to the well-disposed reader, let's mention it explicitly.
Suggested-by: Victoria Dye <vdye@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the output easier to digest.
Note: since workflow output currently cannot contain any nested groups
(see https://github.com/actions/runner/issues/802 for details), we need
to remove the explicit grouping that would span the entirety of each
failed test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current output of Git's GitHub workflow can be quite confusing,
especially for contributors new to the project.
To make it more helpful, let's introduce some collapsible grouping.
Initially, readers will see the high-level view of what actually
happened (did the build fail, or the test suite?). To drill down, the
respective group can be expanded.
Note: sadly, workflow output currently cannot contain any nested groups
(see https://github.com/actions/runner/issues/802 for details),
therefore we take pains to ensure to end any previous group before
starting a new one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When investigating a test failure, the time that matters most is the
time it takes from getting aware of the failure to displaying the output
of the failing test case.
You currently have to know a lot of implementation details when
investigating test failures in the CI runs. The first step is easy: the
failed job is marked quite clearly, but when opening it, the failed step
is expanded, which in our case is the one running
`ci/run-build-and-tests.sh`. This step, most notably, only offers a
high-level view of what went wrong: it prints the output of `prove`
which merely tells the reader which test script failed.
The actually interesting part is in the detailed log of said failed
test script. But that log is shown in the CI run's step that runs
`ci/print-test-failures.sh`. And that step is _not_ expanded in the web
UI by default. It is even marked as "successful", which makes it very
easy to miss that there is useful information hidden in there.
Let's help the reader by showing the failed tests' detailed logs in the
step that is expanded automatically, i.e. directly after the test suite
failed.
This also helps the situation where the _build_ failed and the
`print-test-failures` step was executed under the assumption that the
_test suite_ failed, and consequently failed to find any failed tests.
An alternative way to implement this patch would be to source
`ci/print-test-failures.sh` in the `handle_test_failures` function to
show these logs. However, over the course of the next few commits, we
want to introduce some grouping which would be harder to achieve that
way (for example, we do want a leaner, and colored, preamble for each
failed test script, and it would be trickier to accommodate the lack of
nested groupings in GitHub workflows' output).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the web UI of GitHub workflows, failed runs are presented with the
job step that failed auto-expanded. In the current setup, this is not
helpful at all because that shows only the output of `prove`, which says
which test failed, but not in what way.
What would help understand the reader what went wrong is the verbose
test output of the failed test.
The logs of the failed runs do contain that verbose test output, but it
is shown in the _next_ step (which is marked as succeeding, and is
therefore _not_ auto-expanded). Anyone not intimately familiar with this
would completely miss the verbose test output, being left mostly
puzzled with the test failures.
We are about to show the failed test cases' output in the _same_ step,
so that the user has a much easier time to figure out what was going
wrong.
But first, we must partially revert the change that tried to improve the
CI runs by combining the `Makefile` targets to build into a single
`make` invocation. That might have sounded like a good idea at the time,
but it does make it rather impossible for the CI script to determine
whether the _build_ failed, or the _tests_. If the tests were run at
all, that is.
So let's go back to calling `make` for the build, and call `make test`
separately so that we can easily detect that _that_ invocation failed,
and react appropriately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b92cb86ea1 (travis-ci: check that all build artifacts are
.gitignore-d, 2017-12-31), a function was introduced with a code style
that is different from the surrounding code: it added the opening curly
brace on its own line, when all the existing functions in the same file
cuddle that brace on the same line as the function name.
Let's make the code style consistent again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
macOS CI jobs have been occasionally flaky due to tentative version
skew between perforce and the homebrew packager. Instead of
failing the whole CI job, just let it skip the p4 tests when this
happens.
* cb/ci-make-p4-optional:
ci: use https, not http to download binaries from perforce.com
ci: reintroduce prevention from perforce being quarantined in macOS
ci: avoid brew for installing perforce
ci: make failure to find perforce more user friendly
Since 522354d70f (Add Travis CI support, 2015-11-27) the CI has used
http://filehost.perforce.com/perforce/ to download binaries from
filehost.perforce.com, they were then moved to this script in
657343a602 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10).
Let's use https instead for good measure. I don't think we need to
worry about the DNS or network between the GitHub CI and perforce.com
being MitM'd, but using https gives us extra validation of the payload
at least, and is one less thing to worry about when checking where
else we rely on non-TLS'd http connections.
Also, use the same download site at perforce.com for Linux and macOS
tarballs for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5ed9fc3fc8 (ci: prevent `perforce` from being quarantined, 2020-02-27)
introduces this prevention for brew, but brew has been removed in a
previous commit, so reintroduce an equivalent option to avoid a possible
regression.
This doesn't affect github actions (as configure now) and is therefore
done silently to avoid any possible scary irrelevant messages.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perfoce's cask in brew is meant[1] to be used only by humans, so replace
its use from the CI with a scripted binary download which is less likely
to fail, as it is done in Linux.
Kept the logic together so it will be less likely to break when moved
around as on the fly code changes in this area are settled, at which
point it will also feasable to ammend it to avoid some of the hardcoded
values by using similar variables to the ones Linux does.
In that same line, a POSIX sh syntax is used instead of the similar one
used in Linux in preparation for an unrelated future change that might
change the shell currently configured for it.
This change reintroduces the risk that the installed binaries might not
work because of being quarantined that was fixed with 5ed9fc3fc8 (ci:
prevent `perforce` from being quarantined, 2020-02-27) but fixing that
now was also punted for simplicity and since the affected cloud provider
is scheduled to be retired with an on the fly change, but should be
addressed if that other change is not integrated further.
The discussion on the need to keep 2 radically different versions of
the binaries to be tested with Linux vs macOS or how to upgrade to
newer versions now that brew won't do that automatically for us has
been punted for now as well. On that line the now obsolete comment
about it in lib.sh was originally being updated by this change but
created conflicts as it is moved around by other on the fly changes,
so will be addressed independently as well.
[1] https://github.com/Homebrew/homebrew-cask/pull/122347#discussion_r856026584
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future change that will make perforce installation
optional in macOS, make sure that the check for it is done without
triggering scary looking errors and add a user friendly message instead.
All other existing uses of 'type <cmd>' in our shell scripts that
check the availability of a command <cmd> send both standard output
and error stream to /dev/null to squelch "<cmd> not found" diagnostic
output, but this script left the standard error stream shown.
Redirect it just like everybody else to squelch this error message that
we fully expect to see.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 707d2f2fe8 (CI: use "$runs_on_pool", not
"$jobname" to select packages & config, 2021-11-23).
In that commit I changed CC=gcc from CC=gcc-9, but on OSX the "gcc" in
$PATH points to clang, we need to use gcc-9 instead. Likewise for the
linux-gcc job CC=gcc-8 was changed to the implicit CC=gcc, which would
select GCC 9.4.0 instead of GCC 8.4.0.
Furthermore in 25715419bf (CI: don't run "make test" twice in one
job, 2021-11-23) when the "linux-TEST-vars" job was split off from
"linux-gcc" the "cc_package: gcc-8" line was copied along with
it, so its "cc_package" line wasn't working as intended either.
As a table, this is what's changed by this commit, i.e. it only
affects the linux-gcc, linux-TEST-vars and osx-gcc jobs:
|-------------------+-----------+-------------------+-------+-------|
| jobname | vector.cc | vector.cc_package | old | new |
|-------------------+-----------+-------------------+-------+-------|
| linux-clang | clang | - | clang | clang |
| linux-sha256 | clang | - | clang | clang |
| linux-gcc | gcc | gcc-8 | gcc | gcc-8 |
| osx-clang | clang | - | clang | clang |
| osx-gcc | gcc | gcc-9 | clang | gcc-9 |
| linux-gcc-default | gcc | - | gcc | gcc |
| linux-TEST-vars | gcc | gcc-8 | gcc | gcc-8 |
|-------------------+-----------+-------------------+-------+-------|
Reported-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a copy of uncompress2() implementation in compat/ so that we
can build with an older version of zlib that lack the function, and
the build procedure selects if it is used via the NO_UNCOMPRESS2
$(MAKE) variable. This is yet another "annoying" knob the porters
need to tweak on platforms that are not common enough to have the
default set in the config.mak.uname file.
Attempt to instead ask the system header <zlib.h> to decide if we
need the compatibility implementation. This is a deviation from the
way we have been handling the "compatiblity" features so far, and if
it can be done cleanly enough, it could work as a model for features
that need compatibility definition we discover in the future. With
that goal in mind, avoid expedient but ugly hacks, like shoving the
code that is conditionally compiled into an unrelated .c file, which
may not work in future cases---instead, take an approach that uses a
file that is independently compiled and stands on its own.
Compile and link compat/zlib-uncompress2.c file unconditionally, but
conditionally hide the implementation behind #if/#endif when zlib
version is 1.2.9 or newer, and unconditionally archive the resulting
object file in the libgit.a to be picked up by the linker.
There are a few things to note in the shape of the code base after
this change:
- We no longer use NO_UNCOMPRESS2 knob; if the system header
<zlib.h> claims a version that is more cent than the library
actually is, this would break, but it is easy to add it back when
we find such a system.
- The object file compat/zlib-uncompress2.o is always compiled and
archived in libgit.a, just like a few other compat/ object files
already are.
- The inclusion of <zlib.h> is done in <git-compat-util.h>; we used
to do so from <cache.h> which includes <git-compat-util.h> as the
first thing it does, so from the *.c codes, there is no practical
change.
- Until objects in libgit.a that is already used gains a reference
to the function, the reftable code will be the only one that
wants it, so libgit.a on the linker command line needs to appear
once more at the end to satisify the mutual dependency.
- Beat found a trick used by OpenSSL to avoid making the
conditionally-compiled object truly empty (apparently because
they had to deal with compilers that do not want to see an
effectively empty input file). Our compat/zlib-uncompress2.c
file borrows the same trick for portabilty.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for TravisCI and update test workflows at GitHub.
* ab/ci-updates:
CI: don't run "make test" twice in one job
CI: use "$runs_on_pool", not "$jobname" to select packages & config
CI: rename the "Linux32" job to lower-case "linux32"
CI: use shorter names that fit in UX tooltips
CI: remove Travis CI support
The "reftable" backend for the refs API, without integrating into
the refs subsystem, has been added.
* hn/reftable:
Add "test-tool dump-reftable" command.
reftable: add dump utility
reftable: implement stack, a mutable database of reftable files.
reftable: implement refname validation
reftable: add merged table view
reftable: add a heap-based priority queue for reftable records
reftable: reftable file level tests
reftable: read reftable files
reftable: generic interface to tables
reftable: write reftable files
reftable: a generic binary tree implementation
reftable: reading/writing blocks
Provide zlib's uncompress2 from compat/zlib-compat.c
reftable: (de)serialization for the polymorphic record type.
reftable: add blocksource, an abstraction for random access reads
reftable: utility functions
reftable: add error related functionality
reftable: add LICENSE
hash.h: provide constants for the hash IDs
CI has been taught to catch some Unicode directional formatting
sequence that can be used in certain mischief.
* js/ci-no-directional-formatting:
ci: disallow directional formatting
In 9a5315edfd (Merge branch 'js/patch-mode-in-others-in-c',
2020-02-05), Git acquired a built-in implementation of `git add`'s
interactive mode that could be turned on via the config option
`add.interactive.useBuiltin`.
The first official Git version to support this knob was v2.26.0.
In 2df2d81ddd (add -i: use the built-in version when
feature.experimental is set, 2020-09-08), this built-in implementation
was also enabled via `feature.experimental`. The first version with this
change was v2.29.0.
More than a year (and very few bug reports) later, it is time to declare
the built-in implementation mature and to turn it on by default.
We specifically leave the `add.interactive.useBuiltin` configuration in
place, to give users an "escape hatch" in the unexpected case should
they encounter a previously undetected bug in that implementation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "linux-clang" and "linux-gcc" jobs both run "make test" twice, but
with different environment variables. Running these in sequence seems
to have been done to work around some constraint on Travis, see
ae59a4e44f (travis: run tests with GIT_TEST_SPLIT_INDEX, 2018-01-07).
By having these run in parallel we'll get jobs that finish much sooner
than they otherwise would have.
We can also simplify the control flow in "ci/run-build-and-tests.sh"
as a result, since we won't run "make test" twice we don't need to run
"make" twice at all, let's default to "make all test" after setting
the variables, and then override it to just "all" for the compile-only
tests.
Add a comment to clarify that new "test" targets should adjust
$MAKE_TARGETS rather than being added after the "case/esac". This
should avoid future confusion where e.g. the compilation-only
"pedantic" target will unexpectedly start running tests. See [1] and
[2].
1. https://lore.kernel.org/git/211122.86ee78yxts.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/211123.86ilwjujmd.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup hooks for the CI to use "$runs_on_pool" for the
"$regular" job. Now we won't need as much boilerplate when adding new
jobs to the "regular" matrix, see 956d2e4639 (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for the last such commit.
I.e. now instead of needing to enumerate each jobname when we select
packages we can install things depending on the pool we're running
in.
That we didn't do this dates back to the now gone dependency on Travis
CI, but even if we add a new CI target in the future this'll be easier
to port over, since we can probably treat "ubuntu-latest" as a
stand-in for some recent Linux that can run "apt" commands.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to the preceding commit's shortening of CI job names,
rename the only job that starts with an upper-case letter to be
consistent with the rest. It was added in 88dedd5e72 (Travis: also
test on 32-bit Linux, 2017-03-05).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for running the CI in travis. The last builds in it are
from 5 months ago[1] (as of 2021-11-19), and our documentation has
referred to GitHub CI instead since f003a91f5c (SubmittingPatches:
replace discussion of Travis with GitHub Actions, 2021-07-22).
We'll now run the "t9810 t9816" and tests on OSX. We didn't before, as
we'd carried the Travis exclusion of them forward from
522354d70f (Add Travis CI support, 2015-11-27). Let's hope whatever
issue there was with them was either Travis specific, or fixed since
then (I'm not sure).
The "apt-add-repository" invocation (which we were doing in GitHub CI)
isn't needed, it was another Travis-only case that was carried forward
into more general code. See 0f0c51181d (travis-ci: install packages
in 'ci/install-dependencies.sh', 2018-11-01).
Remove the "linux-gcc-4.8" job added in fb9d7431cf (travis-ci: build
with GCC 4.8 as well, 2019-07-18), it only ran in Travis CI.
1. https://travis-ci.org/github/git/git/builds
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As described in https://trojansource.codes/trojan-source.pdf, it is
possible to abuse directional formatting (a feature of Unicode) to
deceive human readers into interpreting code differently from compilers.
For example, an "if ()" expression could be enclosed in a comment, but
rendered as if it was outside of that comment. In effect, this could
fool a reviewer into misinterpreting the code flow as benign when it is
not.
It is highly unlikely that Git's source code wants to contain such
directional formatting in the first place, so let's just disallow it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
This will be needed for reading reflog blocks in reftable.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Introduce a new 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' environment
variable to also write a multi-pack bitmap when
'GIT_TEST_MULTI_PACK_INDEX' is set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
similar to the recently added sparse task, it is nice to know as early
as possible.
add a dockerized build using fedora (that usually has the latest gcc)
to be ahead of the curve and avoid older ISO C issues at the same time.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just matches the style/location of the package installation for
other jobs. There should be no functional change.
I did flip the order of the options and command-name ("-y update"
instead of "update -y") for consistency with other lines in the same
file.
Note also that we have to reorder the dependency install with the
"checkout" action, so that we actually have the "ci" scripts available.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
In some test-cases, UTF-8 locale is required. To find such locale,
we're using the first available UTF-8 locale that returned by
"locale -a".
However, the locale(1) utility is unavailable on some systems,
e.g. Linux with musl libc.
However, without "locale -a", we can't guess provided UTF-8 locale.
Add a Makefile knob GIT_TEST_UTF8_LOCALE and activate it for
linux-musl in our CI system.
Rename t/lib-git-svn.sh:prepare_a_utf8_locale to prepare_utf8_locale,
since we no longer prepare the variable named "a_utf8_locale",
but set up a fallback value for GIT_TEST_UTF8_LOCALE instead.
The fallback will be LC_ALL, LANG environment variable,
or the first UTF-8 locale from output of "locale -a", in that order.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
We already have tests for the basic parallel-checkout operations. But
this code can also run be executed by other commands, such as
git-read-tree and git-sparse-checkout, which are currently not tested
with multiple workers. To promote a wider test coverage without
duplicating tests:
1. Add the GIT_TEST_CHECKOUT_WORKERS environment variable, to optionally
force parallel-checkout execution during the whole test suite.
2. Set this variable (with a value of 2) in the second test round of our
linux-gcc CI job. This round runs `make test` again with some
optional GIT_TEST_* variables enabled, so there is no additional
overhead in exercising the parallel-checkout code here.
Note that tests checking out less than two parallel-eligible entries
will fall back to the sequential mode. Nevertheless, it's still a good
exercise for the parallel-checkout framework as the fallback codepath
also writes the queued entries using the parallel-checkout functions
(only without spawning any worker).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
In preparation for switching from merge-recursive to merge-ort as the
default strategy, have the testsuite default to running with merge-ort.
Keep coverage of the recursive backend by having the linux-gcc job run
with it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Add a new option that unconditionally enables the pack.writeReverseIndex
setting in order to run the whole test suite in a mode that generates
on-disk reverse indexes. Additionally, enable this mode in the second
run of tests under linux-gcc in 'ci/run-build-and-tests.sh'.
Once on-disk reverse indexes are proven out over several releases, we
can change the default value of that configuration to 'true', and drop
this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
A subsequent commit will remove GETTEXT_POISON entirely, let's start
by removing the CI jobs that enable the option.
We cannot just remove the job because the CI is implicitly depending
on the "poison" job being a sort of "default" job in the sense that
it's the job that was otherwise run with the default compiler, no
other GIT_TEST_* options etc. So let's keep it under the name
"linux-gcc-default".
This means we can remove the initial "make test" from the "linux-gcc"
job (it does another one after setting a bunch of GIT_TEST_*
variables).
I'm not doing that because it would conflict with the in-flight
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18) (currently on the "seen" branch, so
the SHA-1 will almost definitely change). It's going to use that "make
test" again for different reasons, so let's preserve it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
