In 8bf4bec (add "ok=sigpipe" to test_must_fail and use it to
fix flaky tests, 2015-11-27), test_must_fail learned to
recognize "141" as a sigpipe failure. However, testing for
a signal is more complicated than that; we should use
test_match_signal to implement more portable checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test already uses this more portable construct
(that was where it was factored from initially), but the
later tests do a raw comparison against 141 to look for
SIGPIPE, which can fail on some shells and platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In POSIX shells, a program which exits due to a signal
generally has an exit code of 128 plus the signal number.
However, ksh uses 256 plus the signal number. We've
accounted for that in t0005, but not in other tests. Let's
pull out the logic so we can use it elsewhere.
It would be nice for debugging if this additionally printed
errors to stderr, like our other test_* helpers. But we're
going to need to use it in other places besides the innards
of a test_expect block. So let's leave it as generic as
possible.
Note that we also leave the magic "3" for Windows out of the
generic helper. This is an artifact of the way we use
raise() to kill ourselves in test-sigchain.c, and will not
necessarily apply to all programs. So it's better to keep it
out of the helper, to reduce the chance of confusing it with
a real call to exit(3).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 4d5520053 (grep: make it clear i-t-a entries are
ignored, 2015-12-27) and adds an alternative fix to maintain the -L
--cached behavior.
4d5520053 caused 'git grep' to no longer find matches in new files in
the working tree where the corresponding index entry had the "intent to
add" bit set, despite the fact that these files are tracked.
The content in the index of a file for which the "intent to add" bit is
set is considered indeterminate and not empty. For most grep queries we
want these to behave the same, however for -L --cached (files without a
match) we don't want to respond positively for "intent to add" files as
their contents are indeterminate. This is in contrast to files with
empty contents in the index (no lines implies no matches for any grep
query expression) which should be reported in the output of a grep -L
--cached invocation.
Add tests to cover this case and a few related cases which previously
lacked coverage.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used character buffer manipulations to split messages from the
sideband at line breaks and insert "remote: " at the beginning of
each line, using the packet size to determine the end of a message.
However, since it is safe to assume that diagnostic messages from
the sideband never contain NUL characters, we can also NUL-terminate
the buffer, use strpbrk() for splitting lines and use format strings
to insert the prefix, to make the code easier to read and maintain.
A strbuf is used for accumulating the output which is then printed
using a single write(2) call to ensure the atomicity of the output.
See 9ac13ec (atomic write for sideband remote messages, 2006-10-11)
for details.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's another regcomp code block coming in this function that needs
the same error handling. This function can help avoid duplicating
error handling code.
Helped-by: Jeff King <peff@peff.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function returns true if git is running under an UTF-8
locale. pcre in the next patch will need this.
is_encoding_utf8() is used instead of strcmp() to catch both "utf-8"
and "utf8" suffixes.
When built with no gettext support, we peek in several env variables
to detect UTF-8. pcre library might support utf-8 even if libc is
built without locale support.. The peeking code is a copy from
compat/regex/regcomp.c
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"!icase || ascii_only" is repeated twice in this if/else chain as this
series evolves. Rewrite it (and basically revert the first if
condition back to before the "grep: break down an "if" stmt..." commit).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it is not recommended, fsck.c says:
Not having a body is not a crime [...]
... which means that we cannot assume that the commit buffer
contains an empty line to separate header from body. A commit
object with only a header without any body, not even without
a blank line after the header, is valid.
So let's tread carefully here. strstr("\n\n") may find nothing
and return NULL.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are blank lines at the beginning of a commit message, the
pretty printing machinery already skips them when showing a commit
subject (or the complete commit message). We shall henceforth do the
same when reporting the commit subject after the user called
git reset --hard <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like we already taught the find_commit_subject() function (to make
it consistent with the code in pretty.c), we now simply skip leading
blank lines of the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistent with the pretty-printing machinery, we skip leading blank
lines (if any) of existing commit messages.
While Git itself only produces commit objects with a single empty line
between commit header and commit message, it is legal to have more than
one blank line (i.e. lines containing only white space, or no
characters) at the beginning of the commit message, and the
pretty-printing code already handles that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we abort an interactive rebase we do so by calling
`die_abort`, which cleans up after us by removing the rebase
state directory. If the user has requested to use the autostash
feature, though, the state directory may also contain a reference
to the autostash, which will now be deleted.
Fix the issue by trying to re-apply the autostash in `die_abort`.
This will also handle the case where the autostash does not apply
cleanly anymore by recording it in a user-visible stash.
Reported-by: Daniel Hahler <git@thequod.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test merges an external tree in as a subtree, makes some commits
on top of it and splits it back out. In the process the added commits
are lost or the rebase aborts with an internal error. The tests are
marked to expect failure so that we don't forget to fix it.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, ANSI color sequences were supported on Windows only by
overriding the printf() and fprintf() functions, as mentioned in e7821d7
(Add a notice that only certain functions can print color escape codes,
2009-11-27).
As of eac14f8 (Win32: Thread-safe windows console output, 2012-01-14),
however, this is no longer the case, as the ANSI color sequence support
code needed to be replaced with a thread-safe version, one side effect
being that stdout and stderr handled no matter which function is used to
write to it.
So let's just remove the comment that is now obsolete.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an application of the newly added CodingGuidelines to HEAD and
variants like FETCH_HEAD. It was obtained with:
perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current practice is:
git/Documentation$ git grep "'HEAD'" | wc -l
24
git/Documentation$ git grep "\`HEAD\`" | wc -l
66
Let's adopt the majority as a guideline.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was obtained with:
perl -pi -e "s/'--'/\`--\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace spaces with tabs to avoid a warning when further patches change
these lines.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
When "git daemon" is run without --[init-]timeout specified, a
connection from a client that silently goes offline can hang around
for a long time, wasting resources. The socket-level KEEPALIVE has
been enabled to allow the OS to notice such failed connections.
* ew/daemon-socket-keepalive:
daemon: enable SO_KEEPALIVE for all sockets
write(2) can hit the same EAGAIN/EWOULDBLOCK errors as read(2),
so busy-looping on a non-blocking FD is a waste of resources.
Currently, I do not know of a way for this happen:
* the NonBlocking directive in systemd does not apply to stdin,
stdout, or stderr.
* xinetd provides no way to set the non-blocking flag at all
But theoretically, it's possible a careless C10K HTTP server
could use pipe2(..., O_NONBLOCK) to setup a pipe for
git-http-backend with only the intent to use non-blocking reads;
but accidentally leave non-blocking set on the write end passed
as stdout to git-upload-pack.
Followup-to: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should continue to loop after EAGAIN/EWOULDBLOCK as the
intent of xread is to try until there is available data,
EOF, or an unrecoverable error.
Fixes: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the documentation and allows gc.autoPackLimit=1
to maintain a single pack without attempting a repack on every
"git gc --auto" invocation.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation to turn test-regex into some generic regex
testing command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has always been command-list.txt even at the time this
new-command.txt document is added.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git" command prepends the exec-path to the PATH environment
variable for processes it spawns. That is how ". git-sh-setup" in
our scripted Porcelains can find the dot-sourced file in the
exec-path location that is not usually on user's PATH.
When t2300 runs, because it is not spawned by the "git" command, the
scriptlet being tested did not run with a realistic setting of PATH
environment. It lacked the exec-path on the PATH, and failed to
find the dot-sourced file. A recent update to t2300 attempted to
fix this, with "PATH=$(git --exec-path):$PATH", which has been the
recommended way around v1.6.0 days (a script whose original was
written before that release that survives to this day is likely to
have such a line).
However, the "git --exec-path" command outputs C:\path\to\exec\dir
(not /c/path/to/exec/dir) on Windows; the recent update failed to
consider the problem that comes from it.
Even though Git itself, when doing the equivalent internally, does
so in a platform native way (i.e. on Windows, C:\path\to\exec\dir is
prepended to the existing value of %PATH% using ';' as a component
separator), the result is further massaged by bash and gets turned
into $PATH that uses /c/path/to/exec/dir with ':' separating the
components, which is the form understood by bash, so scripted
Porcelains find commands from PATH correctly.
An end user script written in shell, however, cannot prepend
"C:\path\to\exec\dir:" to the existing value of $PATH and expect
bash to magically turn it into the form it understands. In other
words, "PATH=$(git --exec-path):$PATH" does not work as an emulation
of what "Git" internally does to the PATH on Windows.
To correctly emulate how exec-path is prepended to the PATH
environment internally on Windows, we'd need to convert
C:\git-sdk-64\usr\src\git to at least /c\git-sdk-64\usr\src\git
ourselves before prepending it to PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the pretty printing machinery, we should simply ignore
blank lines at the beginning of the commit messages.
This discrepancy was noticed when an early version of the
rebase--helper produced commit objects with more than one empty line
between the header and the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used also in the find_commit_subject()
function.
While at it, rename the function to reflect that it skips not only
empty lines, but any lines consisting of only whitespace, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http://git-htmldocs.googlecode.com/git/git.html says
There was no service found for the uri requested.
Link to the rendered documentation on Jekyll instead.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic here was inverted, you got a message saying the file is
ignored for each file that is not ignored.
Signed-off-by: Andrew Oakley <aoakley@roku.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
