* ao/send-email-irt:
git-send-email.perl: make initial In-Reply-To apply only to first email
t9001: send-email interation with --in-reply-to and --chain-reply-to
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
If an email address in the "to:" list is in the style
"First Last <email@domain.tld>", ie: not just a bare
address like "email@domain.tld", and the same named
entry style exists in the "cc:" list, the current
logic will not remove the entry from the "cc:" list.
Add logic to better deduplicate the "cc:" list by also
matching the email address with angle brackets.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an initial --in-reply-to is supplied, make it apply only to the
first message; --[no-]chain-reply-to setting are honored by second and
subsequent messages; this is also how the git-format-patch option with
the same name behaves.
Moreover, when $initial_reply_to is asked to the user interactively it
is asked as the "Message-ID to be used as In-Reply-To for the _first_
email", this makes the user think that the second and subsequent
patches are not using it but are considered as replies to the first
message or chained according to the --[no-]chain-reply setting.
Look at the v2 series in the illustration to see what the new behavior
ensures:
(before the patch) | (after the patch)
[PATCH 0/2] Here is what I did... | [PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests | [PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation | [PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll | [PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up | [PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests | [PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation | [PATCH v2 3/3] Implementation
This is the typical behaviour we want when we send a series with cover
letter in reply to some discussion, the new patch series should appear
as a separate subtree in the discussion.
Also update the documentation on --in-reply-to to describe the new
behavior.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the use of Sys::Hostname from a "use" to a "require". The
former happens in an implicit BEGIN block and is thus immune from the
if block it's contained in, so it's always loaded.
This should speed up the invocation of git-send-email by a few
milliseconds.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If close fails we want to emit errno, not the return code of whatever
happened to be the child process run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl provides an alternate quote syntax which can make using "" inside
interpolated strings easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason to explicitly stringify a variable in Perl unless
it's an overloaded object and you want to call overload::StrVal,
otherwise it's just creating a new scalar redundantly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the regex introduced in a03bc5b to use the \E...\Q escape
syntax instead of using backslashes. It's more readable like this, and
easier to grep for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the Perl scripts to turn on lexical warnings instead of setting
the global $^W variable via the -w switch.
The -w sets warnings for all code that interpreter runs, while "use
warnings" is lexically scoped. The former is probably not what the
authors wanted.
As an auxiliary benefit it's now possible to build Git with:
PERL_PATH='/usr/bin/env perl'
Which would previously result in failures, since "#!/usr/bin/env perl -w"
doesn't work as a shebang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
valid_fqdn() may attempt to operate on an undefined value if
Net::Domain::domainname fails to determine the domain name. This causes
perl to emit unpleasant warnings.
So, add a check for whether $domain has been defined before using it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change send-email to use Perl's catfile() function instead of
"$dir/$file". If send-email is given a $dir that ends with a / we'll
end up printing a double slashed path like "dir//mtfnpy.patch".
This doesn't cause any problems since Perl's IO layer will handle it,
but it looks ugly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every so often, someone sends out an unedited cover-letter template.
Add a simple check to send-email that refuses to send if the subject
contains "*** SUBJECT HERE ***", with an option --force to override.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command line parameter --smtp-server-option or default
configuration sendemail.smtpserveroption can be used to pass
specific options to the SMTP server. Update the documentation
accordingly.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email passes on an 8bit mail as-is even if it does not
declare a content-type. Because the user can edit email between
format-patch and send-email, such invalid mails are unfortunately not
very hard to come by.
Make git-send-email stop and ask about the encoding to use if it
encounters any such mail. Also provide a configuration setting to
permanently configure an encoding.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the code stored --smtp-domain was unlike its handling of other
similar options. Bring it in line with the others by:
- Renaming $mail_domain to $smtp_domain to match the command line
option. Also move its declaration from near the top of the file to
near other option variables.
- Removing $mail_domain_default. The variable was used once and only
served to move the default away from where it gets used.
- Adding a sendemail.smtpdomain config option. smtp-domain was the
only SMTP configuration option that couldn't be set in the user's
.gitconfig.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Net::Domain::domainname attempts to be very thorough, the
host's configuration can still refuse to give a FQDN. Check to see if
what we receive contains a dot as a basic sanity check.
Since the same condition is used twice and getting complex, let's move
it to a new function.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Jakub Narebski pointed out on the list, Perl code usually prefers
sub func {
}
over
sub func
{
}
git-send-email.perl is somewhat inconsistent in its style, with 23
subroutines using the first style and 6 using the second. Convert the
few odd subroutines so that the code matches normal Perl style.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ja/send-email-ehlo:
git-send-email.perl - try to give real name of the calling host to HELO/EHLO
git-send-email.perl: add option --smtp-debug
git-send-email.perl: improve error message in send_message()
b4479f0 (add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR",
2009-10-30) introduced the use of "git var GIT_EDITOR" to obtain the
preferred editor program, instead of reading environment variables
themselves.
However, "git var GIT_EDITOR" run without a tty (think "cron job") would
give a fatal error "Terminal is dumb, but EDITOR unset". This is not a
problem for add-i, svn, p4 and callers of git_editor() defined in
git-sh-setup, as all of these call it just before launching the editor.
At that point, we know the caller wants to edit.
But send-email ran this near the beginning of the program, even if it is
not going to use any editor (e.g. run without --compose). Fix this by
calling the command only when we edit a file.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new functions maildomain_net(), maildomain_mta() and
maildomain(), which return FQDN where possible for use in
send_message(). The value is passed to Net::SMTP HELO/EHLO
handshake. The domain name can also be set via new --smtp-domain
option.
The default value in Net::SMTP may not get through:
Net::SMTP=GLOB(0x267ec28)>>> EHLO localhost.localdomain
Net::SMTP=GLOB(0x267ec28)<<< 550 EHLO argument does not match calling host
whereas using the FQDN that matches the IP, the result is:
Net::SMTP=GLOB(0x15b8e80)>>> EHLO host.example.com
Net::SMTP=GLOB(0x15b8e80)<<< 250-host.example.com Hello host.example.com [192.168.1.7]
The maildomain*() code is based on ideas in Perl library
Test::Reporter by Graham Barr <gbarr@pobox.com> and Mark Overmeer
<mailtools@overmeer.net> released under the same terms as Perl
itself.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no way to override the sendemail.to, sendemail.cc, and
sendemail.bcc config settings. Add options allowing the user to tell
git to ignore the config settings and take whatever is on the command
line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MTAs reject Cc: lines longer than 78 chars.
Avoid this by using the same join as "To:" ",\n\t"
so each subsequent Cc entry is on a new line.
RCPT TO: should have a single entry per line.
see: http://www.ietf.org/rfc/rfc2821.txt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
alias -group friends foo Foo Bar <foo@bar.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked(-and-tested)-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Jeff King <peff@peff.net>
When encryption=tls and we cannot connect to the SMTP server,
git-send-email was printing an obtuse perl error:
Can't call method "command" on an undefined value
at git-send-email line 927.
This can occur when smtp host or port is misspelled, or the network
is down, and encryption has been set to tls.
Instead we expect some familiar "Cannot connect to SERVER:PORT"
message. Fix it to print normal "smtp can't connect" diagnostics.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In http://article.gmane.org/gmane.comp.version-control.git/109790 I
threatened to announce a change to the default threading style used by
send-email to no-chain-reply-to (i.e. the second and subsequent messages
will all be replies to the first one), unless nobody objected, in 1.6.3.
Nobody objected, as far as I can dig the list archive. But when nothing
happened in 1.6.3 nor 1.6.4, nobody from the camp who complained loudly
that led to the message did not complain either.
So I am guessing that after all nobody cares about this. But 1.7.0 is a
good time to change this, and as I said in the message, I personally think
it is a good change, so here it is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous code, an alias cycle like:
$ echo 'alias a b' >aliases
$ echo 'alias b a' >aliases
$ git config sendemail.aliasesfile aliases
$ git config sendemail.aliasfiletype mutt
would put send-email into an infinite loop. This patch
detects the situation and complains to the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
An earlier commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) broke logic to set up threading
information for the next message by rewriting "!" to "not" without
understanding the precedence rules of the language.
Namely,
! defined $reply_to || length($reply_to) == 0
was changed to
not defined $reply_to || length($reply_to) == 0
which is
not (defined $reply_to || length($reply_to) == 0)
and different from what was intended, which is
(not defined $reply_to) || (length($reply_to) == 0)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 3e0c4ff (send-email: respect in-reply-to regardless of
threading, 2009-03-01) the variable $thread was only used for prompting
for an "In-Reply-To", but not for controlling whether the "In-Reply-To"
and "References" fields should be written into the email.
Thus these fields were always used beginning with the second mail and it
was not possible to produce non-threaded mails anymore.
However, a later commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) introduced a regression with the
side effect to make non-threaded mails possible again, but only when
--no-chain-reply-to was used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to rfc2047, an encoded word has the following form:
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token
encoding = token
token = <Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = <Any printable ASCII character other than "?"
or SPACE>
And rfc822 defines CHARs and CTLs as:
CHAR = <any ASCII character> ; ( 0-177, 0.-127.)
CTL = <any ASCII control ; ( 0- 37, 0.- 31.)
character and DEL> ; ( 177, 127.)
The original code only detected rfc2047 encoded strings when the charset
was UTF-8. This patch generalizes the matching expression and breaks the
check for an rfc2047 encoded string into its own function. There's no real
functional change, since any properly rfc2047 encoded string would have
fallen through the remaining 'if' statements and been returned unchanged.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
It is legal and not uncommon to use quotes in a .mailrc file so
you can include a persons fullname as well as their email alias.
Handle this by using quotewords instead of split when parsing
.mailrc files.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sender address, as specified with the '--from' command line option,
couldn't be set in the config file. So add a new config option,
'sendemail.from', which sets it. One can use 'sendemail.<identity>.from'
as well of course, which is likely the more useful case.
The sender address would default to GIT_AUTHOR_IDENT, which is usually the
right thing, but this doesn't allow switching based on the identity
selected. It's possible to switch the SMTP server and envelope sender by
using the '--identity' option, in which case one probably wants to use a
different from address as well, but this had to be manually specified.
The documentation for 'from' is also corrected somewhat. If '--from' is
specified (or the new sendemail.from option is used) then the user isn't
prompted. The default with no '--from' option (or sendemail.from option)
is GIT_AUTHOR_IDENT first then GIT_COMMITTER_IDENT, not just
GIT_COMMITTER_IDENT.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
elm stores a text file version of the aliases that is
<alias> = <comment> = <email address>
This adds the parsing of this file to git-send-email
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only was it a repeat, but it also had no effect.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone responded with a negative (n|no) to the confirmation,
then the Message-ID of the discarded email is no longer used
in the References: header of subsequent emails.
Consequently, send_message() now returns 1 if the message was
sent and 0 otherwise.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make things a little more robust in terms of user input;
before, even the program got it wrong by outputting a line with only
"GIT:", which was left in place as a header, because there would be
no following space character.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 (send-email: refactor and ensure prompting doesn't loop
forever) introduced an ask function, which unfortunately had a nasty
bug. This caused it not to accept anything but the default reply to the
"Who should the emails appear to be from?" prompt, and nothing but
ctrl-d to the "Who should the emails be sent to?" and "Message-ID to be
used as In-Reply-To for the first email?" prompts.
This commit corrects the issues and adds a test to confirm the fix.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sanitize_address assumes that quoted addresses (e.g., "first last"
<first.last@example.com) do not need rfc2047 encoding, but this is
not always the case.
For example, various places in send-email extract addresses using
parse_address_line. parse_address_line returns the addresses already
quoted (e.g., "first last" <first.last@example.com), but not rfc2047
encoded.
This patch makes sanitize_address stricter about what needs rfc2047
encoding and adds a test demonstrating where I noticed the problem.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 made the "Send this email?" prompt assume yes if confirm
= "inform" when it was unable to get a valid response. However, the
"yes" assumption only worked correctly for the first email. This commit
fixes the issue and confirms the fix by modifying the existing test for
the prompt to send multiple emails.
Reported by Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to prompt when the tty is closed (typically when running from
cron) is pointless and emits a warning. This patch causes ask() to
return early, squelching the warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several places in send-email prompt for input, and will do so forever
when the input is EOF. This is poor behavior when send-email is run
unattended (say from cron).
This patch refactors the prompting to an ask() function which takes a
prompt, an optional default, and an optional regex to validate the
input. The function returns on EOF, or if a default is provided and the
user simply types return, or if the input passes the validating regex
(which accepts all input by default). The ask() function gives up after
10 tries in case of invalid input.
There are four callers of the function:
1) "Who should the emails appear to be from?" which provides a default
sender. Previously the user would have to type ctrl-d to accept the
default. Now the user can just hit return, or type ctrl-d.
2) "Who should the emails be sent to?". Previously this prompt passed a
second argument ("") to $term->readline() which was ignored. I believe
the intent was to allow the user to just hit return. Now the user
can do so, or type ctrl-d.
3) "Message-ID to be used as In-Reply-To for the first email?".
Previously this prompt passed a second argument (effectively undef) to
$term->readline() which was ignored. I believe the intent was the same
as for (2), to allow the user to just hit return. Now the user can do
so, or type ctrl-d.
4) "Send this email?". Previously this prompt would loop forever until
it got a valid reply. Now it stops prompting on EOF or a valid reply. In
the case where confirm = "inform", it now defaults to "y" on EOF or the
user hitting return, otherwise an invalid reply causes send-email to
terminate.
A followup patch adds tests for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eed6ca7 caused a minor regression when it switched to using
tempfile() to generate the temporary compose file. Since tempfile()
creates the file at the time it generates the filename, zero-length
temporary files are being left behind unless --compose is used (in which
case the file is cleaned up).
This patch fixes the regression by not calling tempfile() to generate
the compose filename unless --compose is in use.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git format-patch is given multiple --cc arguments, it generates a
Cc header that looks like:
Cc: first@example.com,
second@example.com,
third@example.com
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email is supposed to be able to run from outside a repo. This
ability was broken by commits caf0c3d6 (make the message file name more
specific) and 5df9fcf6 (interpret unknown files as revision lists).
This commit provides a fix for both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai points out that calling parse_line() assuming that the caller
ever passes only one argument is a bug waiting to happen, and he is
right.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correctly handle email addresses containing quoted commas, e.g.
"Zhu, Yi" <yi.zhu@intel.com>, "Li, Shaohua" <shaohua.li@intel.com>
The commas inside the double quotes are not separators.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop picks elements from @ARGV one by one, sifts them into arguments
meant for format-patch and the script itself, and pushes them to @files
and @rev_list_opts arrays. Pick elements from @ARGV starting at the
beginning using shift, instead of at the end using pop, as push appends
them to the end of the array.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/send-email:
git send-email: ask less questions when --compose is used.
git send-email: add --annotate option
git send-email: interpret unknown files as revision lists
git send-email: make the message file name more specific.
See: http://www.washington.edu/pine/tech-notes/low-level.html
Entries with a fcc or comment field after the address weren't parsed
correctly.
Continuation lines, identified by leading spaces, were also not handled.
Distribution lists which had ( ) around a list of addresses did not have
the parenthesis removed.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --compose is used, we can grab the From/Subject/In-Reply-To from the
edited summary, let it be so and don't ask the user silly questions.
The summary templates gets quite revamped, and includes the list of
patches subjects that are going to be sent with this batch.
When having a body full of empty lines, the summary isn't sent. Document
that in the git-send-email manpage fully.
Note: It doesn't deal with To/Cc/Bcc yet.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to review every patch (and fix various aspects of them, or
comment them) in an editor just before being sent. Combined to the fact
that git send-email can now process revision lists, this makes git
send-email and efficient way to review and send patches interactively.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filter out all the arguments git-send-email doesn't like to a
git format-patch command, that dumps its content to a safe directory.
Barf when a file/revision conflict occurs, allow it to be overriden
--[no-]format-patch.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps editors choosing their syntax hilighting properly.
Also make the file live under the git directory.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.4 cycle
add instructions on how to send patches to the mailing list with Gmail
Documentation/gitattributes: Add subsection header for each attribute
git send-email: avoid leaking directory file descriptors.
send-pack: do not send out single-level refs such as refs/stash
fix overlapping memcpy in normalize_absolute_path
pack-objects: avoid reading uninitalized data
correct cache_entry allocation
Conflicts:
RelNotes
The documentation now mentions sendemail.signedoffbycc instead
of sendemail.signedoffcc in order to match with the options
--signed-off-by-cc; the code has been updated to reflect this
as well, but sendemail.signedoffcc is still handled.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The options are partitioned into more digestible groups.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is also now a configuration variable:
sendemail[.<identity>].validate
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
All of the descriptions are aligned, shorter,
better arranged, and no line is greater than
78 columns.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Specifically, boolean options are now listed in the form
--[no-]option
and both forms of documentation now consistently use
--[no-]signed-off-by-cc
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In 8291db6 (git-send-email: add charset header if we add encoded 'From',
2007-11-16), "$1" is used from a regexp without using () to capture
anything in $1. Later, when that value was used, it causes a warning about
a variable being undefined, instead of using the correct value for
comparison (not that it makes difference in the current code that does not
do actual re-encoding).
Signed-off-by: Peter Valdemar Mørch <peter@morch.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Send HELO again after a successful STARTTLS command to refresh the list of
extensions. These may be different to what is returned over a clear
connection (for example the AUTH command may be accepted over a secure
connection, but not over a clear connection).
Furthermore, this behaviour is recommended by RFC 2487
(http://www.ietf.org/rfc/rfc2487.txt).
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous TLS patch, send-email would attempt to STARTTLS at
the beginning of every mail, despite reusing the last connection. We
simply skip further encryption checks after successful TLS initiation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous patch, not configuring any encryption (either on or
off) would leave $smtp_encryption undefined. We simply set it to the
empty string in that case.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a fifo is given, validation must be skipped because we can't
read the fifo twice. Ideally git-send-email would cache the read
data instead of attempting to read twice, but for now just skip
validation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interactively supplying addresses to send an email to with
send-email, whitespace after the separation comma (as in 'list, jc')
wasn't ignored. This meant that resolving of the alias ' jc' would
fail, sending an email only to list. With this patch, the optional
trailing whitespace is ignored.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-send-email-compose:
send-email: rfc2047-quote subject lines with non-ascii characters
send-email: specify content-type of --compose body
Conflicts:
t/t9001-send-email.sh
Due to 065096c (git-send-email.perl: Handle shell metacharacters in
$EDITOR properly, 2008-05-04) which is a backward incompatible change (but
it makes handling of EDITOR consistent with other parts of the system),
the test script t9001 had to be adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Need to quote all special characters, not just the first one
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always use 'utf-8' as the encoding, since we currently
have no way of getting the information from the user.
This also refactors the quoting of recipient names, since
both processes can share the rfc2047 quoting code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the compose message contains non-ascii characters, then
we assume it is in utf-8 and include the appropriate MIME
headers. If the user has already included a MIME-Version
header, then we assume they know what they are doing and
don't add any headers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
This fixes the git-send-perl semantics for launching an editor when
$GIT_EDITOR (or friends) contains shell metacharacters to match
launch_editor() in builtin-tag.c. If we use the current approach
(sh -c '$0 $@' "$EDITOR" files ...), we see it fails when $EDITOR has
shell metacharacters:
$ sh -x -c '$0 $@' "$VISUAL" "foo"
+ "$FAKE_EDITOR" foo
"$FAKE_EDITOR": 1: "$FAKE_EDITOR": not found
Whereas builtin-tag.c will invoke sh -c "$EDITOR \"$@\"".
Thus, this patch changes git-send-email.perl to use the same method as the
C utilities, and additionally updates t/t9001-send-email.sh to test for
this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to always CC patches to a given mailing list. In
these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might not have some configuration variables available, but if the
user doesn't care about that, neither should we. Still use the
repository if it is available, though.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to countermand suppression of Cc to the signers with a more
explicit --signed-off-by option done in 6564828 (git-send-email:
Generalize auto-cc recipient mechanism) suffers from a double-negation
error.
A --signed-off-cc option, when false, should actively suppress CC: to be
generated out of S-o-b lines, and it should refrain from suppressing when
it is true.
It also fixes "(sob) Adding cc:" status output; earlier it included the
line terminator LF inside '%s', which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
The check to see if initial_reply_to is defined was also comparing $_ to
"" for a reason I cannot ascertain (looking at the commit which made the
change didn't provide enlightenment), but if $_ is undefined, perl
generates a warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when the user sent the EOF control character, the
prompts would be repeated on the same line as the previous
prompt.
Now, repeat prompts display on separate lines.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single signal handler is used for both SIGTERM and
SIGINT in order to clean up after an uncouth termination
of git-send-email.
In particular, the handler resets the text color (this cleanup
was already present), turns on tty echoing (in case termination
occurrs during a masked Password prompt), and informs the user
of of any temporary files created by --compose.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the subtile bug in git send-email that was introduced into
git send-email with aa54892f5a (send-email:
detect invocation errors earlier), which caused no patches to be sent
out if the --compose flag was used.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Tested-by: Seth Falcon <seth@userprimary.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are now sanity-checking the contents of patches and
refusing to send ones with long lines, this knob provides a
way for the user to override the new behavior (if, e.g., he
knows his SMTP path will handle it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to catch errors early so that we don't end up sending
half of a broken patch series. Right now the only validation
is checking that line-lengths are under the SMTP-mandated
limit of 998.
The validation parsing is very crude (it just checks each
line length without understanding the mailbox format) but
should work fine for this simple check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never even look at the command line arguments until after
we have prompted the user for some information. So running
"git send-email" without arguments would prompt for "from"
and "to" headers, only to then die with "No patch files
specified." Instead, let's try to do as much error checking
as possible before getting user input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not prompting, initial_reply_to can be left unset. Do not try to
sanitize it and get useless warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3803bcea tried to fix this, but it only adds the branckes when the given
In-Reply-To begins and ends with whitespaces. It also didn't do anything
to the --in-reply-to argument.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email with SMTP authentication sending a patch series
would redundantly authenticate multiple times, once for each patch. In
the worst case, this would actually prevent the series from being sent
because the server would reply with a "5.5.0 Already Authenticated"
status code which would derail the process.
This commit teaches git-send-email to authenticate once and only once at
the beginning of the series.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
