The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
When resetting the working tree files recursively, the working tree
of submodules are now also reset to match.
* sb/submodule-update-reset-fix:
submodule: submodule_move_head omits old argument in forced case
unpack-trees: oneway_merge to update submodules
t/lib-submodule-update.sh: fix test ignoring ignored files in submodules
t/lib-submodule-update.sh: clarify test
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
"git add -p" was taught to ignore local changes to submodules as
they do not interfere with the partial addition of regular changes
anyway.
* nd/add-i-ignore-submodules:
add--interactive: ignore submodule changes except HEAD
"git stash -- <pathspec>" incorrectly blew away untracked files in
the directory that matched the pathspec, which has been corrected.
* tg/stash-with-pathspec-fix:
stash: don't delete untracked files that match pathspec
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
"git merge -Xours/-Xtheirs" learned to use our/their version when
resolving a conflicting updates to a symbolic link.
* jc/merge-symlink-ours-theirs:
merge: teach -Xours/-Xtheirs to symbolic link merge
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
When git-daemon gets a pktline request, we strip off any
trailing newline, replacing it with a NUL. Clients prior to
5ad312bede (in git v1.4.0) would send:
git-upload-pack repo.git\n
and we need to strip it off to understand their request.
After 5ad312bede, we send the host attribute but no newline,
like:
git-upload-pack repo.git\0host=example.com\0
Both of these are parsed correctly by git-daemon. But if
some client were to combine the two:
git-upload-pack repo.git\n\0host=example.com\0
we don't parse it correctly. The problem is that we use the
"len" variable to record the position of the NUL separator,
but then decrement it when we strip the newline. So we start
with:
git-upload-pack repo.git\n\0host=example.com\0
^-- len
and end up with:
git-upload-pack repo.git\0\0host=example.com\0
^-- len
This is arguably correct, since "len" tells us the length of
the initial string, but we don't actually use it for that.
What we do use it for is finding the offset of the extended
attributes; they used to be at len+1, but are now at len+2.
We can solve that by just leaving "len" where it is. We
don't have to care about the length of the shortened string,
since we just treat it like a C string.
No version of Git ever produced such a string, but it seems
like the daemon code meant to handle this case (and it seems
like a reasonable thing for somebody to do in a 3rd-party
implementation).
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our git-protocol tests rely on invoking the client
and having it make a request of a server. That gives a nice
real-world test of how the two behave together, but it
doesn't leave any room for testing how a server might react
to _other_ clients.
Let's add a few test helper functions which can be used to
manually conduct a git-protocol conversation with a remote
git-daemon:
1. To connect to a remote git-daemon, we need something
like "netcat". But not everybody will have netcat. And
even if they do, the behavior with respect to
half-duplex shutdowns is not portable (openbsd netcat
has "-N", with others you must rely on "-q 1", which is
racy).
Here we provide a "fake_nc" that is capable of doing
a client-side netcat, with sane half-duplex semantics.
It relies on perl's IO::Socket::INET. That's been in
the base distribution since 5.6.0, so it's probably
available everywhere. But just to be on the safe side,
we'll add a prereq.
2. To help tests speak and read pktline, this patch adds
packetize() and depacketize() functions.
I've put fake_nc() into lib-git-daemon.sh, since that's
really the only server where we'd need to use a network
socket. Whereas the pktline helpers may be of more general
use, so I've added them to test-lib-functions.sh. Programs
like upload-pack speak pktline, but can talk directly over
stdio without a network socket.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we receive a request with extended attributes after the
NUL, we try to write those attributes to the log. We do so
with a "%s" format specifier, which will only show
characters up to the first NUL.
That's enough for printing a "host=" specifier. But since
dfe422d04d (daemon: recognize hidden request arguments,
2017-10-16) we may have another NUL, followed by protocol
parameters, and those are not logged at all.
Let's cut out the attempt to show the whole string, and
instead log when we parse individual attributes. We could
leave the "extended attributes (%d bytes) exist" part of the
log, which in theory could alert us to attributes that fail
to parse. But anything we don't parse as a "host=" parameter
gets blindly added to the "protocol" attribute, so we'd see
it in that part of the log.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If receive a request like:
git-upload-pack /foo.git\0host=localhost
we mark the offset of the NUL byte as "len", and then log
the bytes after the NUL with a "%.*s" placeholder, using
"pktlen - len" as the length, and "line + len + 1" as the
start of the string.
This is off-by-one, since the start of the string skips past
the separating NUL byte, but the adjusted length includes
it. Fortunately this doesn't actually read past the end of
the buffer, since "%.*s" will stop when it hits a NUL. And
regardless of what is in the buffer, packet_read() will
always add an extra NUL terminator for safety.
As an aside, the git.git client sends an extra NUL after a
"host" field, too, so we'd generally hit that one first, not
the one added by packet_read(). You can see this in the test
output which reports 15 bytes, even though the string has
only 14 bytes of visible data. But the point is that even a
client sending unusual data could not get us to read past
the end of the buffer, so this is purely a cosmetic fix.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start git-daemon for our tests, we send its stderr
log stream to a named pipe. We synchronously read the first
line to make sure that the daemon started, and then dump the
rest to descriptor 4. This is handy for debugging test
output with "--verbose", but the tests themselves can't
access the log data.
Let's dump the log into a file, as well, so that future
tests can check the log. There are a few subtleties worth
calling out here:
- we'll continue to send output to descriptor 4 for
viewing/debugging, which would imply swapping out "cat"
for "tee". But we want to ensure that there's no
buffering, and "tee" doesn't have a standard way to
ask for that. So we'll use a shell loop around "read"
and "printf" instead. That ensures that after a request
has been served, the matching log entries will have made
it to the file.
- the existing first-line shell loop used read/echo. We'll
switch to consistently using "read -r" and "printf" to
relay data as faithfully as possible.
- we open the logfile for append, rather than just output.
That makes it OK for tests to truncate the logfile
without restarting the daemon (the OS will atomically
seek to the end of the file when outputting each line).
That allows tests to look at the log without worrying
about pollution from earlier tests.
Helped-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually care about the clone operation here; we
just want to know if we were able to actually contact the
remote repository. Using ls-remote does that more
efficiently, and without us having to worry about managing
the tmp.git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently introduced regression caused a segfault at clone time on
case-insensitive filesystems when filenames differing only in case are
present. This bug has already been fixed (repository: pre-initialize
hash algo pointer, 2018-01-18), but it's not the first time similar
problems have arisen. Therefore, introduce a test to catch this case and
protect against future regressions.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_TRACE_CURL provides a way to debug what is being sent and received
over HTTP, with automatic redaction of sensitive information. But it
also logs data transmissions, which significantly increases the log file
size, sometimes unnecessarily. Add an option "GIT_TRACE_CURL_NO_DATA" to
allow the user to omit such data transmissions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using GIT_TRACE_CURL, Git already redacts the "Authorization:" and
"Proxy-Authorization:" HTTP headers. Extend this redaction to a
user-specified list of cookies, specified through the
"GIT_REDACT_COOKIES" environment variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a96d3cc3f6 ("cache-tree: reject entries with null sha1", 2017-04-21)
we made sure that broken cache entries do not get propagated to new
trees. Part of that was making sure not to re-use an existing cache
tree that includes a null oid.
It did so by dropping the cache tree in 'do_write_index()' if one of
the entries contains a null oid. In split index mode however, there
are two invocations to 'do_write_index()', one for the shared index
and one for the split index. The cache tree is only written once, to
the split index.
As we only loop through the elements that are effectively being
written by the current invocation, that may not include the entry with
a null oid in the split index (when it is already written to the
shared index), where we write the cache tree. Therefore in split
index mode we may still end up writing the cache tree, even though
there is an entry with a null oid in the index.
Fix this by checking for null oids in prepare_to_write_split_index,
where we loop the entries of the shared index as well as the entries for
the split index.
This fixes t7009 with GIT_TEST_SPLIT_INDEX. Also add a new test that's
more specifically showing the problem.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For 'add -i' and 'add -p', the only action we can take on a dirty
submodule entry is update the index with a new value from its HEAD. The
content changes inside (from its own index, untracked files...) do not
matter, at least until 'git add -i' learns about launching a new
interactive add session inside a submodule.
Ignore all other submodules changes except HEAD. This reduces the number
of entries the user has to check through in 'git add -i', and the number
of 'no' they have to answer to 'git add -p' when dirty submodules are
present.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 89a70b80 ("t0302 & t3900: add forgotten quotes", 2018-01-03), quotes
were added to protect against spaces in $HOME. In the test_when_finished
command, two files are deleted which must be quoted individually.
[jc: with \$HOME in the test_when_finished command quoted, as
pointed out by j6t].
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: do not look at the index during recursive merge
"git rebase -p -X<option>" did not propagate the option properly
down to underlying merge strategy backend.
* js/fix-merge-arg-quoting-in-rebase-p:
rebase -p: fix quoting when calling `git merge`
Git's assumption that all path lists are colon-separated is not only
wrong on Windows, it is not even an assumption that is compatible with
POSIX.
In the interest of time, let's not try to fix this properly but simply
work around the obvious breakage on Windows, where the MSYS2 Bash used
by Git for Windows to interpret the Git's Unix shell scripts will
automagically convert path lists in the environment to
semicolon-separated lists of Windows paths (with drive letter and the
corresponding colon and all that jazz).
In other words, we simply look whether there is a semicolon in
GITPERLLIB and split by semicolons if found instead of colons. This is
not fool-proof, of course, as the path list could consist of a single
path. But that is not the case in Git for Windows' test suite, there are
always two paths in GITPERLLIB.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging another branch into ours, if their tree is the same as
the common ancestor's, we can declare that our tree represents the
result of three-way merge. In such a case, the recursive merge
backend incorrectly used to create a commit out of our index, even
when the index has changes.
A recent fix attempted to prevent this by adding a comparison
between "our" tree and the index, but forgot that this check must be
restricted only to the outermost merge. Inner merges performed by
the recursive backend across merge bases are by definition made from
scratch without having any local changes added to the index. The
call to index_has_changes() during an inner merge is working on the
index that has no relation to the merge being performed, preventing
legitimate merges from getting carried out.
Fix it by limiting the check to the outermost merge.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when 'git stash push -- <pathspec>' is used, untracked files
that match the pathspec will be deleted, even though they do not end up
in a stash anywhere.
This is because the original commit introducing the pathspec feature in
git stash push (df6bba0937 ("stash: teach 'push' (and 'create_stash') to
honor pathspec", 2017-02-28)) used the sequence of 'git reset <pathspec>
&& git ls-files --modified <pathspec> | git checkout-index && git clean
<pathspec>'.
The intention was to emulate what 'git reset --hard -- <pathspec>' would
do. The call to 'git clean' was supposed to clean up the files that
were unstaged by 'git reset'. This would work fine if the pathspec
doesn't match any files that were untracked before 'git stash push --
<pathspec>'. However if <pathspec> matches a file that was untracked
before invoking the 'stash' command, all untracked files matching the
pathspec would inadvertently be deleted as well, even though they
wouldn't end up in the stash, and are therefore lost.
This behaviour was never what was intended, only blobs that also end up
in the stash should be reset to their state in HEAD, previously
untracked files should be left alone.
To achieve this, first match what's in the index and what's in the
working tree by adding all changes to the index, ask diff-index what
changed between HEAD and the current index, and then apply that patch in
reverse to get rid of the changes, which includes removal of added
files and resurrection of removed files.
Reported-by: Reid Price <reid.price@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
When using hard reset or forced checkout with the option to recurse into
submodules, the submodules need to be reset, too.
It turns out that we need to omit the duplicate old argument to read-tree
in all forced cases to omit the 2 way merge and use the more assertive
behavior of reading the specific new tree into the index and updating
the working tree.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that the test replacing a submodule with a file with
the submodule containing an ignored file is incorrectly titled,
because the test put the file in place, but never ignored that file.
When having an untracked file Instead of an ignored file in the
submodule, git should refuse to remove the submodule, but that is
a bug in the implementation of recursing into submodules, such that
the test just passed, removing the untracked file.
Fix the test first; in a later patch we'll fix gits behavior,
that will make sure untracked files are not deleted.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep the local branch name as the upstream branch name to avoid confusion.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been reported that strategy arguments are not passed to `git
merge` correctly when rebasing interactively, preserving merges.
The reason is that the strategy arguments are already quoted, and then
quoted again.
This fixes https://github.com/git-for-windows/git/issues/1321
Original-patch-by: Kim Gybels <kgybels@infogroep.be>
Also-reported-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The apache config used by tests was updated to use the SetEnvIf
directive to set the Git-Protocol header in 19113a26b6 ("http: tell
server that the client understands v1", 2017-10-16).
Setting the Git-Protocol header is restricted to httpd >= 2.4, but
mod_setenvif and the SetEnvIf directive work with lower versions, at
least as far back as 2.0, according to the httpd documentation:
https://httpd.apache.org/docs/2.0/mod/mod_setenvif.html
Drop the restriction. Tested with httpd 2.2 and 2.4.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 5b594f457a ("Threaded grep", 2010-01-25) the number of
threads git-grep uses under PTHREADS has been hardcoded to 8, but
there's no performance test to check whether this is an optimal
setting.
Amend the existing tests for the grep engines to support a mode where
this can be tested, e.g.:
GIT_PERF_GREP_THREADS='1 8 16' GIT_PERF_LARGE_REPO=~/g/linux ./run p782*
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cleaning up files in the $HOME directory, it really makes sense to
quote the path, especially in Git's test suite, where the HOME directory
is *guaranteed* to contain spaces in its name.
It would appear that those two tests pass even without cleaning up the
files, but really more by pure chance than by design (the cleanup seems
not actually to be necessary).
However, if anybody would have a left-over `trash/` directory in Git's
`t/` directory, these tests would fail, because they would all of a
sudden try to delete that directory, but without the `-r` (recursive)
flag. That is how this issue was found.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is totally legitimate to clone Git's source code anywhere, including
into, say, directories whose name (or the name of its absolute path)
contains spaces.
However, a couple of tests failed to anticipate this, for lack of
quoting (or in one instance, for failure to expect more than one space
in the absolute path of the TEST_DIRECTORY). This can be easily verified
by calling these commands in your current clone:
git clone . with\ spaces
cd with\ spaces
make -j15 test
Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an old script which could use some updating before
we add to it:
- use the standard line-breaking:
test_expect_success 'title' '
body
'
- run all code inside test_expect blocks to catch
unexpected failures in setup steps
- use "test_commit -C" instead of manually entering
sub-repo
- use test_when_finished for cleanup steps
- test_path_is_* as appropriate
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
