All of the other options were included in the synopsis, so it makes
sense to include these as well.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of code in Git's configure.ac doesn't follow the typical formatting,
idioms and best practices for Autoconf input files. Improve the situation.
There are probably many more similar improvements to be done, but trying
to clump all of them in a single change would make it unreviewable, so we
content ourselves with a partial improvement.
This change is just cosmetic, and should cause no semantic change.
The most relevant of the changes introduced by this patch are:
- Do not add trailing '\' characters for line continuation where they
are not truly needed.
- In several (but not all) macro calls, properly quote the arguments.
- Few cosmetic changes in spacing and comments.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is just cosmetic, and should cause no semantic change, nor
any change in the generated configure script.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, no spurious comments nor whitespace will be propagated in the
generated configure script.
This change is a pure code movement (plus addition of a comment line).
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An alphabetic ordered list (a.) is converted to numerical in
the man page (1.) so context comments naming 'a' were confusing,
fix that by not using ordered list notation for 'a' anb 'b' items.
Signed-off-by: Nelson Benitez Leon <nelsonjesus.benitez@seap.minhap.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both la and context are zero at the start of the loop, la wraps around
and we end up reading from memory far away. Skip the loop in that case
instead.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: Teach gitk to respect log.showroot
gitk: Add menu items for comparing a commit with the marked commit
gitk: Speed up resolution of short SHA1 ids
gitk: Use symbolic font names "sans" and "monospace" when available
gitk: Skip over AUTHOR/COMMIT_DATE when searching all fields
gitk: Make "git describe" output clickable, too
gitk: Fix the display of files when filtered by path
gitk: Use a tabbed dialog to edit preferences
gitk: Use "gitk: repo-top-level-dir" as window title
In early days, all projects managed by git (except for git itself) had the
product of a fairly mature development history in their first commit, and
it was deemed unnecessary clutter to show additions of these thousands of
paths as a patch.
"git log" learned to show the patch for the initial commit without requiring
--root command line option at 0f03ca9 (config option log.showroot to show
the diff of root commits, 2006-11-23).
Teach gitk to respect log.showroot.
[paulus@samba.org: Cleaned up the Tcl a bit, use --bool on the
git config call]
Signed-off-by: Marcus Karlsson <mk@acc.umu.se>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Merge-recursive detects renames so that if one side modifies
"foo" and the other side moves it to "bar", the modification
is applied to "bar". However, our rename detection is based
on content analysis, it can be wrong (i.e., two files were
not intended as a rename, but just happen to have the same
or similar content).
This is quite rare if the files actually contain content,
since two unrelated files are unlikely to have exactly the
same content. However, empty files present a problem, in
that there is nothing to analyze. An uninteresting
placeholder file with zero bytes may or may not be related
to a placeholder file with another name.
The result is that adding content to an empty file may cause
confusion if the other side of a merge removed it; your
content may end up in another random placeholder file that
was added.
Let's err on the side of caution and not consider empty
files as renames. This will cause a modify/delete conflict
on the merge, which will let the user sort it out
themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our rename detection is a heuristic, matching pairs of
removed and added files with similar or identical content.
It's unlikely to be wrong when there is actual content to
compare, and we already take care not to do inexact rename
detection when there is not enough content to produce good
results.
However, we always do exact rename detection, even when the
blob is tiny or empty. It's easy to get false positives with
an empty blob, simply because it is an obvious content to
use as a boilerplate (e.g., when telling git that an empty
directory is worth tracking via an empty .gitignore).
This patch lets callers specify whether or not they are
interested in using empty files as rename sources and
destinations. The default is "yes", keeping the original
behavior. It works by detecting the empty-blob sha1 for
rename sources and destinations.
One more flexible alternative would be to allow the caller
to specify a minimum size for a blob to be "interesting" for
rename detection. But that would catch small boilerplate
files, not large ones (e.g., if you had the GPL COPYING file
in many directories).
A better alternative would be to allow a "-rename"
gitattribute to allow boilerplate files to be marked as
such. I'll leave the complexity of that solution until such
time as somebody actually wants it. The complaints we've
seen so far revolve around empty files, so let's start with
the simple thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read-cache implementation defines this static function,
but it is a generally useful concept in git. Let's give
the empty blob the same treatment as the empty tree,
providing both hex and binary forms of the sha1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This macro already evaluates to the correct type, as it
casts the string literal to "unsigned char *" itself
(and callers who want the literal can use the _LITERAL
form).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removing this function shortens the code and makes it easier to read.
Now all environment variables are set as part of procedural operation.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system call to Git works the same whether or not ".exe" is
appended to "git". The extra code is not necessary.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding the script directory to PATH is not needed. The script is
located at '$(git --exec-path)', which is already on the PATH.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to this commit, the script exited with an error whenever the
usage string was printed, regardless of the reason it was done. In
cases where usage was printed due to a user request (e.g. '-h'
option), the script should exit without error (exit 0).
This commit adds an argument to the usage function that allows the
exit code to be specified when the function is called.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches difftool to handle the '--no-gui' option. This option
negates the existing '--gui' option. The last setting given on the command
line wins.
This allows a user to configure "[alias] mdt = difftool --gui", but still
have the ability to override the setting without error:
$ git mdt --no-gui
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace custom option/argument parser with standard Getopt::Long
module. This shortens the code and makes it easier to understand.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "it's" to "its" where a possessive is intended. Also add two
missing "the" that were noticed by Ben Walton.
Signed-off-by: David Waitzman <djw@bbn.com>
Sometimes one wants to see the different between two commits that are
a long distance apart in the graph display. This is difficult to do
with the "Diff this -> selected" and "Diff selected -> this" menu
items because the need to maintain the selection means that one can't
use the find facilities or the reference list window to navigate from
one to the other.
This provides an alternative using the mark. Having found one commit,
one marks it with the "Mark this commit" menu item, then navigates to
the other commit and uses the new "Diff this -> marked commit" and/or
"Diff marked commit -> this" menu items.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Certain versions of zsh seems to treat
local var=()
as a function declaration, rather than an assignment of an empty array,
although its documentation does not suggest that this should be the case.
With zsh 4.3.15 on Fedora Core 15, this causes
__git_ps1 " (%s)"
to trigger an error message:
local:2: command not found: svn_url_pattern
when GIT_PS1_SHOWUPSTREAM="auto".
Signed-off-by: Alex Merry <dev@randomguy3.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though 1.7.9.x series does not open the editor by default
when merging in general, it does do so in one occassion: when
merging an annotated tag. And worse yet, there is no good way
for older scripts to decline this.
Backport the support for GIT_MERGE_AUTOEDIT environment variable
from 1.7.10 track to help those stuck on 1.7.9.x maintenance
track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nelson Benitez Leon opened a discussion with a patch with this in the
note:
Hi, I was using git rebase -i for some time now and never occured to
me I could reorder the commit lines to affect the order the commits
are applied, learnt that recently from a git tutorial.
Nelson's patch was to stress the fact that the lines in the insn sheet can
be re-ordered in a much more verbose way. Let's add a one-liner reminder
and also remind that the lines in the insn sheet is read from top to
bottom, unlike the "git log" output.
Discussion-triggered-by: Nelson Benitez Leon
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git log --graph --stat -p" broke the ancestry graph lines
with a single empty line between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git log --graph --stat -p" emits the three-dash separator
line before the graph that shows ancestry lines. The separator should
come after the ancestry lines just like all the other output.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool relies on the ability to forward unknown arguments
to the git-diff command. Add a test to ensure that this works
as advertised.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On large repositories such as the Linux kernel, it can take quite a
noticeable time (several seconds) for gitk to resolve short SHA1 IDs
to their long form. This speeds up the process by maintaining lists
of IDs indexed by the first 4 characters of the SHA1 ID, speeding up
the search by a factor of 65536 on large repositories.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The following only concerns systems using X and the client-side font
rendering framework from freedesktop.org. Windows and Mac OS X are
not affected.
Starting with version 8.5, Tk uses freetype and fontconfig by default
to render fonts on platforms that support it. Gitk currently defaults
to the font Helvetica for the interface and Courier for diffs, and
both unfortunately look rather bad on screen in the default
configuration on many Linux distros with anti-aliasing and poor
hinting.
It is better to default to "sans" and "monospace", which are mapped by
fontconfig to some appropriate font of the sysadmin and user's
choosing (typically Bitstream Vera Sans and Mono). The result looks
more sensible and it makes gitk feel like a well-behaved software
citizen since its fonts match other native apps.
This patch does not change the appearance of gitk for users that have
already run it, since gitk uses the remembered UI and diff font names
from ~/.gitk.
Requested-by: Michael Biebl <biebl@debian.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This prevents a search for a number like "105" on "All Fields" from
matching against the raw author and commit timestamps. These
timestamps were already not searchable by themselves, and the
displayed format does not match the query string anyway.
Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Automake's contribution guidelines suggest using "git describe" output
in commit logs to reference previous commits. By contrast, in
coreutils, I had acquired the habit of using a bare SHA1 prefix (8 hex
digits), since gitk creates clickable links for that, and not for "git
describe" output.
I prefer the readability of the full "git describe" output, yet want
to retain the gitk links, so this renders as clickable not just
SHA1-like strings, but also an SHA1-like string that is prefixed by
"-g".
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Launching 'gitk -- .' or 'gitk -- ..\t' restricts the display to files
under the given directory but the file list is left empty. This is because
the path_filter function fails to match the filenames which are relative
to the working tree to the filter which is filessytem relative.
This solves the problem by making both names fully qualified filesystem
paths before performing the comparison.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit converts the user preferences dialog into a tabbed property
sheet grouping general properties, colours and font selections onto
separate pages. The previous implementation was exceeding the screen
height on some systems and this avoids such problems and permits extension
using new pages in the future.
If themed Tk is unavailable or undesired a reasonable facsimile of the
tabbed notebook widget is used instead.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Previously, when run in a subdirectory, gitk would show the name
of this subdirectory as title, which was misleading. When run with
GIT_DIR set, it would show the cwd, which is even more misleading.
In case of non-bare repos, the .git suffix in the path is skipped.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
When I added the i18n infrastructure in v1.7.8-rc2-1-g5e9637c I forgot
to install Git::I18N also when NO_PERL_MAKEMAKER=YesPlease was
set. Change the generation of the fallback perl.mak file to do that.
Now Git/I18N.pm is installed alongside Git.pm in such a way that
anything that uses GITPERLLIB will find it.
Reported-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to validate the history connectivity between old refs and new
refs used by fetch and receive-pack, introduced in 1.7.8, was grossly
inefficient and unnecessarily tried to re-validate integrity of individual
objects. This essentially reverts that performance regression.
* jc/maint-verify-objects-remove-pessimism:
fetch/receive: remove over-pessimistic connectivity check
