* ks/blame-worktree-textconv-cached:
fill_textconv(): Don't get/put cache if sha1 is not valid
t/t8006: Demonstrate blame is broken when cachetextconv is on
If the user's shell in NSS passwd is /bin/false (eg as found during Gentoo's
package building), the git-rebase exec tests will fail, because they call
$SHELL around the command, and in the existing testcase, $SHELL was not being
cleared sufficently.
This lead to false positive failures of t3404 on systems where the package
build user was locked down as noted above.
Signed-off-by: "Robin H. Johnson" <robbat2@gentoo.org>
X-Gentoo-Bug: 349083
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=349083
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX awk seems to explicitly not support hexadecimal escape sequences.
From http://pubs.opengroup.org/onlinepubs/009695399/:
Regular expressions in awk have been extended somewhat...
One sequence that is not supported is hexadecimal value escapes
beginning with '\x'.
This affects the awk on IRIX 6.5, and causes t4015.56 to fail.
Use octal instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "rebase --skip" is used to skip the last patch in the series, the
code to wrap up the rewrite by copying the notes from old to new commits
and also by running the post-rewrite hook was bypassed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike bash and ksh, dash passes through hexadecimal \xcc escapes.
So when run with dash, these tests *pass* (since '\xcc' is a perfectly
reasonable filename) but they are not testing what was intended.
Use octal escapes instead, in the spirit of v1.6.1-rc1~55^2
(2008-11-09).
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells, for example dash versions older than 0.5.4, need to
spell a variable reference as '$N' rather than 'N' in an arithmetic
expansion. In order to avoid the syntax error, we change the
offending variable reference from 'i' to '$i' in function scramble.
There is nothing bash specific to this test script (and we shouldn't
have any bash dependent test). Fix its shebang line.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making commits (either by pulling or doing their own work) after a
failed "am", the user will be reminded by next "am" invocation that there
was a failed "am" that the user needs to decide to resolve or to get rid
of the old "am" attempt. The "am --abort" option was meant to help the
latter. However, it rewinded the HEAD back to the beginning of the failed
"am" attempt, discarding commits made (perhaps by mistake) since.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When blaming files in the working tree, the filespec is marked with
!sha1_valid, as we have not given the contents an object name yet. The
function to cache textconv results (keyed on the object name), however,
didn't check this condition, and ended up on storing the cached result
under a random object name.
Cc: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Cc: Clément Poulain <clement.poulain@ensimag.imag.fr>
Cc: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have a git repository with lots of .doc and .pdf files. There diff
works ok, but blaming is painfully slow without textconv cache, and with
textconv cache, blame says lots of lines are 'Not Yet Committed' which
is wrong.
Here is a test that demonstrates the problem.
Cc: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Cc: Clément Poulain <clement.poulain@ensimag.imag.fr>
Cc: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_commit and test_path_is_missing
functions from the test library.
Also make sure that a merge which fails due to
pre-merge checks aborts properly and does not
leave MERGE_HEAD behind.
The "will not overwrite removed file" test is an
exception to this. It notices the untracked file
at a stage where the merge is already well under
way. Therefore we cannot abort the merge without
major restructuring. See the following thread for
more details.
http://mid.gmane.org/7vskopwxej.fsf@gitster.siamese.dyndns.org
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* gc/http-with-non-ascii-username-url:
Fix username and password extraction from HTTP URLs
t5550: test HTTP authentication and userinfo decoding
Conflicts:
t/lib-httpd/apache.conf
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the authentification initialisation to percent-decode username
and password for HTTP URLs.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for HTTP authentication and proper percent-decoding of the
userinfo (username and password) part of the URL.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
