* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
* jm/maint-misc-fix:
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
GIT_PREFIX was added in 7cf16a14f5 so that
aliases can know the directory from which a !alias was called.
Knowing the prefix relative to the root is helpful in other programs
so export it to built-ins as well.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, a negative error return becomes a very large read
value. We catch this in practice because we compare the
expected and actual numbers of bytes (and you are not likely
to be reading (size_t)-1 bytes), but this makes the
correctness a little more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
In particular, sparse issues the "symbol 'a_symbol' was not declared.
Should it be static?" warnings for the following symbols:
setup.c:159:3: 'pathspec_magic'
setup.c:176:12: 'prefix_pathspec'
These symbols only require file scope, so we add the static modifier
to their declarations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A colon followed by anything !isalnum() (e.g. ":/heh") at this point is
known not to be an existing rev. Just give a generic "neither a rev nor
a path" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd :/no-such-string-ever-existed" runs an extra round of get_sha1()
since 009fee4 (Detailed diagnosis when parsing an object name fails.,
2009-12-07). Once without error diagnosis to see there is no commit with
such a string in the log message (hence "it cannot be a ref"), and after
seeing that :/no-such-string-ever-existed is not a filename (hence "it
cannot be a path, either"), another time to give "better diagnosis".
The thing is, the second time it runs, we already know that traversing the
history all the way down to the root will _not_ find any matching commit.
Rename misguided "gently" parameter, which is turned off _only_ when the
"detailed diagnosis" codepath knows that it cannot be a ref and making the
call only for the caller to die with a message. Flip its meaning (and
adjust the callers) and call it "only_to_die", which is not a great name,
but it describes far more clearly what the codepaths that switches their
behaviour based on this variable do.
On my box, the command spends ~1.8 seconds without the patch to make the
report; with the patch it spends ~1.12 seconds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may want to give the pathspec subsystem such a feature, but not while
we are still using get_pathspec() that returns a stupid "char **" that
loses subtle nuances that existed in the input string.
In the meantime, the callers of get_pathspec() that want to support it
could do an equivalent before feeding their argv[] to the function
themselves quite easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d0546e2d48, which
was only meant to be a Proof-of-concept used during the discussion.
The real implementation of the feature needs to wait until we migrate
all the code to use "struct pathspec", not "char **", to represent
richer semantics given to pathspec.
The earlier design was to take whatever non-alnum that the short format
parser happens to support, leaving the rest as part of the pattern, so a
version of git that knows '*' magic and a version that does not would have
behaved differently when given ":*Makefile". The former would have
applied the '*' magic to the pattern "Makefile", while the latter would
used no magic to the pattern "*Makefile".
Instead, just reserve all non-alnum ASCII letters that are neither glob
nor regexp special as potential magic signature, and when we see a magic
that is not supported, die with an error message, just like the longhand
codepath does.
With this, ":%#!*Makefile" will always mean "%#!" magic applied to the
pattern "*Makefile", no matter what version of git is used (it is a
different matter if the version of git supports all of these three magic
matching rules).
Also make ':' without anything else to mean "there is no pathspec". This
would allow differences between "git log" and "git log ." run from the top
level of the working tree (the latter simplifies no-op commits away from
the history) to be expressed from a subdirectory by saying "git log :".
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support ":/" magic string that can be prefixed to a pathspec element to
say "this names the path from the top-level of the working tree", when
you are in the subdirectory.
For example, you should be able to say:
$ edit Makefile ;# top-level
$ cd Documentation
$ edit git.txt ;# in the subdirectory
and then do one of three things, still inside the subdirectory:
$ git add -u . ;# add only Documentation/git.txt
$ git add -u :/ ;# add everything, including paths outside Documentation
$ git add -u ;# whatever the default setting is.
To truly support magic pathspec, the API needs to be restructured so that
get_pathspec() and init_pathspec() are unified into one call. Currently,
the former just prefixes the user supplied pathspec with the current
subdirectory path, and the latter takes the output from the former and
pre-parses them into a bit richer structure for easier handling. They
should become a single API function that takes the current subdirectory
path and the remainder of argv[] (after parsing --options and revision
arguments from the command line) and returns an array of parsed pathspec
elements, and "magic" should become attributes of struct pathspec_item.
This patch implements only "top" magic because it can be hacked into the
system without such a refactoring.
The syntax for magic pathspec prefix is designed to be extensible yet
simple to type to invoke a simple magic like "from the top". The parser
for the magic prefix is hooked into get_pathspec() function in this patch,
and it needs to be moved when we refactor the API.
But we have to start from somewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same old problem reappears after setup code is reworked. We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
otherwise, comparison to validate against work tree will fail when
the path includes a symlink and the name passed is not canonical.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and
makes internal copy of $GIT_WORK_TREE absolute. The environt variable,
if set by user, remains unchanged. If the variable is relative, it is
no longer correct because its base dir has changed.
Instead of making $GIT_WORK_TREE absolute too, we just say "." and let
subsequent git processes handle it.
Reported-by: Michel Briand <michelbriand@free.fr>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is the most complex one among the three setup_*
functions because all GIT_DIR, GIT_WORK_TREE, core.worktree and
core.bare are involved.
Because core.worktree is only effective inside
setup_explicit_git_dir() and the extra code in setup_git_directory()
is to handle that. The extra code can now be retired.
Also note that setup_explicit assignment is removed, worktree setting
is no longer decided by get_git_work_tree(). get_git_work_tree() will
be simplified in the next commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.bare is true, discard the discovered worktree, move back to
original cwd.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
work_tree_env argument is removed because this function does not need
it. GIT_WORK_TREE is only effective inside setup_explicit_git_dir.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git_config() is called, either git_dir has already been set (by
$GIT_DIR env or set_git_dir()), or it will default git_dir to ".git".
git_config_early() gives setup functions more freedom because it does
not require git_dir. Give it a config path, it will happily examine
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/extended-sha1-relpath:
get_sha1: teach ":$n:<path>" the same relative path logic
get_sha1: support relative path ":path" syntax
Make prefix_path() return char* without const
Conflicts:
sha1_name.c
* jn/parse-options-extra:
update-index: migrate to parse-options API
setup: save prefix (original cwd relative to toplevel) in startup_info
parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION
parse-options: allow git commands to invent new option types
parse-options: never suppress arghelp if LITERAL_ARGHELP is set
parse-options: do not infer PARSE_OPT_NOARG from option type
parse-options: sanity check PARSE_OPT_NOARG flag
parse-options: move NODASH sanity checks to parse_options_check
parse-options: clearer reporting of API misuse
parse-options: Don't call parse_options_check() so much
prefix_path() allocates new buffer. There's no reason for it to keep
the buffer for itself and waste memory.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save the path from the original cwd to the cwd at the end of the
setup procedure in the startup_info struct introduced in e37c1329
(2010-08-05). The value cannot vary from thread to thread anyway,
since the cwd is global.
So now in your builtin command, instead of passing prefix around,
when you want to convert a user-supplied path to a cwd-relative
path, you can use startup_info->prefix directly.
Caveat: As with the return value from setup_git_directory_gently(),
startup_info->prefix would be NULL when the original cwd is not a
subdir of the toplevel.
Longer term, this would allow the prefix to be reused when several
noncooperating functions require access to the same repository (for
example, when accessing configuration before running a builtin).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current prefix_filename() is proofed against the case where the prefix
'pfx' is NULL or a 0-length string, _except on Windows_.
Change the behaviour to work the same on both platforms, and only
check pfx_len so that callers passing a NULL prefix with a nonzero
pfx_len segfault early on both.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* 'jn/maint-setup-fix' (early part):
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
As v1.7.2~16^2 (git --paginate: paginate external commands
again, 2010-07-14) explains, builtins (like git config) that
do not use RUN_SETUP are not finding GIT_DIR set correctly when
it is time to launch the pager from run_builtin(). If they
were to search for a repository sooner, then the outcome of such
early repository accesses would be more predictable and reliable.
The cmd_*() functions learn whether a repository was found through the
*nongit_ok return value from setup_git_directory_gently(). If
run_builtin() is to take care of the repository search itself, that
datum needs to be retrievable from somewhere else. Use the
startup_info struct for this.
As a bonus, this information becomes available to functions such as
git_config() which might want to avoid trying to access a repository
when none is present.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish the clean-up of setup_git_directory_gently() by splitting the
last case of validation+setup (global variables, prefix, check_format,
set_git_dir) into its own function. Now setup_git_git_directory_gently
itself takes care of discovery only and the functions that pick up
from there are nearby in the source file so they can be easily
compared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.6.1.3~4^2 (Fix gitdir detection when in subdir of gitdir,
2009-01-16) did not go far enough: when a git directory is
an ancestor of the original working directory, not only
should GIT_DIR be set to point to the .git directory, but
the original working directory should be restored before
carrying out the relevant command.
This way, the effect of running a git command from a subdir
of .git will be the same whether or not GIT_DIR is explicitly
set.
Noticed while investigating v1.6.0.3~1 (rehabilitate 'git
index-pack' inside the object store, 2008-10-20).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not eliminate any code, but it skims some off of
the main loop of setup_git_directory_gently so that can be
understood more easily.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perhaps some day, other similar conditions (hitting the mount point,
hitting the root of the file system) will share this code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repository is found as an ancestor of the original
working directory, it is assumed by default to be bare.
Handle this case with its own function.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository discovery procedure looks something like this:
while (same filesystem) {
check .git in working dir
check .
chdir(..)
}
Add a function for the first step to make the actual code look a bit
closer to that pseudocode.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GIT_DIR is set, setup_git_directory_gently does not have
to do any repository discovery at all. Split off a function
for the validation it still does do, in the hope that this will
make setup_git_directory_gently proper less daunting to read.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prevents a buffer overrun that could otherwise be triggered by
creating a file called '.git' with contents
gitdir: (something really long)
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original declaration was int, which seems to cause trouble on my
machine. It causes spurious "filesystem boundary" errors when running
the testsuite. The cause seems to be
$ stat -c%d .
2147549952
which is too large for a 32-bit int type.
Using the correct type, dev_t, solves the issue. (Because I'm
paranoid and forgetful, I checked -- yes, Unix v7 had dev_t.)
Other uses of st_dev seem to be reasonably safe. fill_stat_cache_info
truncates it to an 'unsigned int', but that value seems to be used only
to validate the cache, and only if USE_STDEV is defined.
Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a missing ONE_FILESYSTEM defaults to true, the only users who set this
variable set it to false to tell git not to limit the discovery to one
filesystem; there are too many negations in one sentence to make a simple
panda brain dizzy.
Use the variable GIT_DISCOVERY_ACROSS_FILESYSTEM that changes the
behaviour from the default "limit to one filesystem" to "cross the
boundary as I ask you to"; makes the semantics much more straight
forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regarding the new environment variable, Linus Torvalds
<torvalds@linux-foundation.org> writes on Tue, 30 Mar 2010 in
<alpine.LFD.2.00.1003301537150.3707@i5.linux-foundation.org>:
I suspect that it is _very_ unusual to have a source repo that crosses
multiple filesystems, and the original reason for this patch-series
seems to me to be likely to be more common than that multi-fs case. So
having the logic go the other way would seem to match the common case,
no?
The "crossing filesystem boundary" condition is checked by comparing
st_dev field in the result from stat(2). This is slightly worrysome if
non-POSIX ports return different values in the field even for directories
in the same work tree extracted to the same "filesystem". Erik Faye-Lund
confirms that in the msysgit port st_dev is 0, so this should be safe, as
"even Windows is safe" ;-)
This will affect those who use /.git to cram /etc and /home/me in the same
repostiory, /home is mounted from non-root filesystem, and a git operation
is done from inside /home/me/src. But that is such a corner case we don't
want to give preference over helping people who will benefit from having
this default so that they do not have to suffer from slow automounters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git pay attention to the GIT_ONE_FILESYSTEM environment
variable. When that variable is set, git will stop searching for a
GIT_DIR when it attempts to cross a filesystem boundary.
When working in an environment with too many automount points to make
maintaining a GIT_CEILING_DIRECTORIES list enjoyable, GIT_ONE_FILESYSTEM
gives the option of turning all such attempts off with one setting.
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this truncation the error message printed only shows the cwd
from the start of the search, not where it failed.
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
Git should work regardless where the working directory is located,
even at root. This patch fixes two places where it assumes working
directory always have parent directory.
In setup_git_directory_gently(), when Git goes up to root and finds
.git there, it happily sets worktree to "" instead of "/".
In prefix_path(), loosen the outside repo check a little bit. Usually
when a path XXX is inside worktree /foo, it must be either "/foo", or
"/foo/...". When worktree is simply "/", we can safely ignore the
check: we have a slash at the beginning already.
Not related to worktree, but also set gitdir correctly if a bare repo
is placed (insanely?) at root.
Thanks João Carlos Mendes Luís for pointing out this problem.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch converts the setenv() calls in path.c and setup.c. After
the call, git grep with a pager works again in bare repos.
It leaves the setenv(GIT_DIR_ENVIRONMENT, ...) calls in git.c alone, as
they respond to command line switches that emulate the effect of setting
the environment variable directly.
The remaining site in environment.c is in set_git_dir() and is left
alone, too, of course. Finally, builtin-init-db.c is left changed
because the repo is still being carefully constructed when the
environment variable is set.
This fixes git shortlog when run inside a git directory, which had been
broken by abe549e1.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 842abf0 (Teach resolve_gitlink_ref() about the .git file, 2008-02-20)
taught resolve_gitlink_ref() to call read_gitfile_gently() to resolve .git
files. In this commit teach read_gitfile_gently() to interpret a relative
path in a .git file with respect to the file location.
This change allows update-index to recognize a submodule that uses a relative
path in its .git file. It previously failed because the relative path was
wrongly interpreted with respect to the superproject directory.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to invole the logic of verify_filename() to make sure the
pathname arguments are unambiguous without actually dying. The caller may
want to do something different.
The code which is conditional on MinGW32 is actually conditional on Windows.
Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments,
but not by Cygwin.
Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does
not add NUL at the end of the buffer if the result fits the buffer size
exactly.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
This function and normalize_absolute_path() do almost the same thing. The
former already works on Windows, but the latter crashes.
In subsequent changes we will remove normalize_absolute_path(). Here we
make the replacement function reusable. On the way we rename it to reflect
that it does some path normalization. Apart from that this is only moving
around code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify all
fatal: Not a git repository
error messages so they include path information.
Signed-off-by: Richard Hartmann <richih@net.in.tum.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are 9 places where prefix_path is called, and only in one of
them the returned pointer was checked to be non-zero and only to
call exit(128) as it is usually done by die(). In other 8 places,
the returned value was not checked and it caused SIGSEGV when a
path outside of the working tree was used. For instance, running
git update-index --add /some/path/outside
caused SIGSEGV.
This patch changes prefix_path() to die if the path is outside of
the repository, so it never returns NULL.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When setup_git_directory() returns successfully, it is supposed to move
current working directory to worktree toplevel directory.
However, the code recomputing prefix inside setup_git_directory() has
to move cwd back to original working directory, in order to get new
prefix. After that, it should move cwd back to worktree toplevel
directory as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
GIT's guts work with a forward slash as a path separators. We do not change
that. Rather we make sure that only "normalized" paths enter the depths
of the machinery.
We have to translate backslashes to forward slashes in the prefix and in
command line arguments. Fortunately, all of them are passed through
functions in setup.c.
A macro has_dos_drive_path() is defined that checks whether a path begins
with a drive letter+colon combination. This predicate is always false on
Unix. Another macro is_dir_sep() abstracts that a backslash is also a
directory separator on Windows.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
This turns two switch/case statements into an if-else-if cascade because
we later do not want to have
case '/':
#ifdef __MINGW32__
case '\\':
#endif
but use a predicate is_dir_sep(foo) in order to check for the directory
separator.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Once we find the absolute paths for git_dir and work_tree, we can make
git_dir a relative path since we know pwd will be work_tree. This should
save the kernel some time traversing the path to work_tree all the time
if git_dir is inside work_tree.
Daniel's patch didn't apply for me as-is, so I recreated it with some
differences, and here are the numbers from ten runs each.
There is some IO for me - probably due to more-or-less random flushing of
the journal - so the variation is bigger than I'd like, but whatever:
Before:
real 0m8.135s
real 0m7.933s
real 0m8.080s
real 0m7.954s
real 0m7.949s
real 0m8.112s
real 0m7.934s
real 0m8.059s
real 0m7.979s
real 0m8.038s
After:
real 0m7.685s
real 0m7.968s
real 0m7.703s
real 0m7.850s
real 0m7.995s
real 0m7.817s
real 0m7.963s
real 0m7.955s
real 0m7.848s
real 0m7.969s
Now, going by "best of ten" (on the assumption that the longer numbers
are all due to IO), I'm saying a 7.933s -> 7.685s reduction, and it does
seem to be outside of the noise (ie the "after" case never broke 8s, while
the "before" case did so half the time).
So looks like about 3% to me.
Doing it for a slightly smaller test-case (just the "arch" subdirectory)
gets more stable numbers probably due to not filling the journal with
metadata updates, so we have:
Before:
real 0m1.633s
real 0m1.633s
real 0m1.633s
real 0m1.632s
real 0m1.632s
real 0m1.630s
real 0m1.634s
real 0m1.631s
real 0m1.632s
real 0m1.632s
After:
real 0m1.610s
real 0m1.609s
real 0m1.610s
real 0m1.608s
real 0m1.607s
real 0m1.610s
real 0m1.609s
real 0m1.611s
real 0m1.608s
real 0m1.611s
where I'ld just take the averages and say 1.632 vs 1.610, which is just
over 1% peformance improvement.
So it's not in the noise, but it's not as big as I initially thought and
measured.
(That said, it obviously depends on how deep the working directory path is
too, and whether it is behind NFS or something else that might need to
cause more work to look up).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case where setup_git_directory_gently fails, avoid the last
chdir("..") by moving it after the ceil_offset check.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_git_directory_gently() only modified the value of its *nongit_ok
argument if we were not in a git repository. Now it will always set it
to 0 when we are inside a repository.
Also remove now unnecessary initializations in the callers of this
function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit d089ebaa (setup: sanitize absolute and funny paths) made
get_pathspec() aware of absolute paths, but with a botched interface that
forced the callers to count the resulting pathspecs in order to detect
an error of giving a path that is outside the work tree.
This fixes it, by dying inside the function.
We had ls-tree test that relied on a misfeature in the original
implementation of its pathspec handling. Leading slashes were silently
removed from them. However we allow giving absolute pathnames (people
want to cut and paste from elsewhere) that are inside work tree these
days, so a pathspec that begin with slash _should_ be treated as a full
path. The test is adjusted to match the updated rule for get_pathspec().
Earlier I mistook three tests given by Robin that they should succeed, but
these are attempts to add path outside work tree, which should fail
loudly. These tests also have been fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/setup:
builtin-mv: minimum fix to avoid losing files
git-add: adjust to the get_pathspec() changes.
Make blame accept absolute paths
setup: sanitize absolute and funny paths in get_pathspec()
The prefix_path() function called from get_pathspec() is
responsible for translating list of user-supplied pathspecs to
list of pathspecs that is relative to the root of the work
tree. When working inside a subdirectory, the user-supplied
pathspecs are taken to be relative to the current subdirectory.
Among special path components in pathspecs, we used to accept
and interpret only "." ("the directory", meaning a no-op) and
".." ("up one level") at the beginning. Everything else was
passed through as-is.
For example, if you are in Documentation/ directory of the
project, you can name Documentation/howto/maintain-git.txt as:
howto/maintain-git.txt
../Documentation/howto/maitain-git.txt
../././Documentation/howto/maitain-git.txt
but not as:
howto/./maintain-git.txt
$(pwd)/howto/maintain-git.txt
This patch updates prefix_path() in several ways:
- If the pathspec is not absolute, prefix (i.e. the current
subdirectory relative to the root of the work tree, with
terminating slash, if not empty) and the pathspec is
concatenated first and used in the next step. Otherwise,
that absolute pathspec is used in the next step.
- Then special path components "." (no-op) and ".." (up one
level) are interpreted to simplify the path. It is an error
to have too many ".." to cause the intermediate result to
step outside of the input to this step.
- If the original pathspec was not absolute, the result from
the previous step is the resulting "sanitized" pathspec.
Otherwise, the result from the previous step is still
absolute, and it is an error if it does not begin with the
directory that corresponds to the root of the work tree. The
directory is stripped away from the result and is returned.
- In any case, the resulting pathspec in the array
get_pathspec() returns omit the ones that caused errors.
With this patch, the last two examples also behave as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_git_directory_gently has done the check already.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-am -i: report rewritten title
git grep shows the same hit repeatedly for unmerged paths
Do check_repository_format() early (re-fix)
Do check_repository_format() early
Add missing inside_work_tree setting in setup_git_directory_gently
This pushes check_repository_format() (actually _gently() version)
to setup_git_directory_gently() in order to prevent from
using unsupported repositories.
New setup_git_directory_gently()'s behaviour is stop searching
for a valid gitdir and return as if there is no gitdir if a
unsupported repository is found. Warning will be thrown in these
cases.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repository version check is only performed when
setup_git_directory() is called. This makes sure
setup_git_directory_gently() does the check too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the helper function to test for absolute paths makes porting easier.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check in cmd_blame() if the specified path is there, but we
failed to set up the working tree before that.
While at it, make setup_work_tree() just return if it was run
before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
