The throughput display needs a delay period before accounting and
displaying anything. Yet it might be called after some amount of data
has already been transferred. The display of total data is therefore
accounted late and therefore smaller than the reality.
Let's call display_throughput() with an absolute amount of transferred
data instead of a relative number, and let the throughput code find the
relative amount of data by itself as needed. This way the displayed
total is always exact.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sq_quote_buf() treats single-quotes and exclamation marks specially, but
it incorrectly parsed the input for single-quotes and backslashes.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because there wasn't a test for --numbered isn't a good reason
not to test format.numbered. So now we test both.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format.numbered is a tri-state variable. Boolean values enable or
disable numbering by default and "auto" enables number when outputting
more than one patch.
--no-numbered (short: -N) will disable numbering.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible for the remote summary line to be displayed over the
local progress display line, and therefore that local progress gets
bumped to the next line. However, if the progress line is long enough,
it might not be entirely overwritten by the remote summary line. This
creates a messed up display such as:
remote: Total 310 (delta 160), reused 178 (delta 112)iB/s
Receiving objects: 100% (310/310), 379.98 KiB | 136 KiB/s, done.
So we have to clear the screen line before displaying the remote message
to make sure the local progress is not visible anymore on the first
line.
Yet some Git versions on the remote side might be sending updates to the
same line and terminate it with \r, and a separate packet with a single
\n might be sent later when the progress display is done. This means
the screen line must *not* be cleared in that case.
Since the sideband code already has to figure out line breaks in the
received packet to properly prepend the "remote:" prefix, we can easily
determine if the remote line about to be displayed is empty. Only when
it is not then a proper suffix is inserted before the \r or \n to clear
the end of the screen line.
Also some magic constants related to the prefix length have been
replaced with a variable, making it similar to the suffix length
handling. Since gcc is smart enough to detect that the variable is
constant there is no impact on the generated code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
* jn/gitweb:
gitweb: Use config file for repository description and URLs
gitweb: Read repo config using 'git config -z -l'
gitweb: Add tests for overriding gitweb config with repo config
gitweb: Use href(-replay=>1, action=>...) to generate alternate views
gitweb: Use href(-replay=>1, page=>...) to generate pagination links
gitweb: Easier adding/changing parameters to current URL
gitweb: Remove CGI::Carp::set_programname() call from t9500 gitweb test
gitweb: Add 'status_str' to parse_difftree_raw_line output
gitweb: Always set 'from_file' and 'to_file' in parse_difftree_raw_line
The purpose of the function update_index_from_diff() (which is the
callback function we give do_diff_cache()) is to update those index
entries which differ from the given commit.
Since do_diff_cache() plays games with the in-memory index, this function
discarded the cache and reread it.
Then, back in the function read_from_tree() we wrote the index.
Of course, this broke down when there were no changes and
update_index_from_diff() was not called, and therefore the mangled index
was not discarded.
The solution is to move the index writing into the function
update_index_from_diff().
Noticed by Björn Steinbrink.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn <cmd> --help" gave options in the order they were found in a
Perl hash, which meant "randomly" to humans.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"-q" is the very first option described in the git-fetch manpage, and it
isn't supported.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids to launch the pager when git blame fails for any reason.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation states for the -u option that underscores in tag and
branch names are converted to dots, but this was actually implemented
for the tag names only.
Kurt Roeckx reported this through
http://bugs.debian.org/446495
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "ancestor" is a bit more intuitive (and more consistent with
the documentation) than the term "strict subset".
Also, remove superfluous "ref", capitalize, and add some carriage
returns, changing:
error: remote 'refs/heads/master' is not a strict subset of local ref 'refs/heads/master'. maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
to:
error: remote 'refs/heads/master' is not an ancestor of
local 'refs/heads/master'.
Maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the fetch output much more terse and prettier on a 80 column
display, based on a consensus reached on the mailing list. Here's an
example output:
Receiving objects: 100% (5439/5439), 1.60 MiB | 636 KiB/s, done.
Resolving deltas: 100% (4604/4604), done.
From git://git.kernel.org/pub/scm/git/git
! [rejected] html -> origin/html (non fast forward)
136e631..f45e867 maint -> origin/maint (fast forward)
9850e2e..44dd7e0 man -> origin/man (fast forward)
3e4bb08..e3d6d56 master -> origin/master (fast forward)
fa3665c..536f64a next -> origin/next (fast forward)
+ 4f6d9d6...768326f pu -> origin/pu (forced update)
* [new branch] todo -> origin/todo
Some portions of this patch have been extracted from earlier proposals
by Jeff King and Shawn Pearce.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow to use configuration variable gitweb.description for repository
description if there is no $GIT_DIR/description file, and multivalued
configuration variable gitweb.url for URLs of a project (to clone or
fetch from) if there is no $GIT_DIR/cloneurl file.
While repository description is shown in the projects list page, so it
is better to use file and not config variable for performance, it is I
think better to use gitweb.url for URLs (as it is shown only on
project summary page).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git_get_project_config to run git-config only once per
repository, without changing its signature (its calling convention).
This means for example that it returns 'true' or 'false' when called
with second argument '--bool', and not true or false value.
Instead of calling 'git config [<type>] --get gitweb.<key>' once for
each config variable, call 'git config -z -l' only once, parsing and
saving its output to %config variable. This makes possible to add new
per repository configuration without paying cost of forking once per
variable checked. We can now allow repository description and
repository URLs to be stored in config file without badly affecting
gitweb performance.
For now only configuration variables for 'gitweb' section are stored.
Multiple values for single configuration variable are stored as
anonymous array reference; configuration variable with no value is
stored as undef.
Converting configuration variable values to boolean or integer value
are done in Perl. Results differ from git-config in the fact that no
conversion error is ever raised. For boolean values no value, 'true'
(any case) and 'false' (any case) are considered true, numbers are
true if not zero; all other values (even invalid for bool) are
considered false. For integer values value suffix of 'k', 'm', or 'g'
following decimal number will cause the value to be multiplied by
1024, 1048576, or 1073741824; other values are returned as-is, only
whitespace stripped.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make blame view and snapshot support overridable by repository
config. Test tree view with both features disabled, and with both
features enabled.
Test with features enabled also tests multiple formats snapshot
support (in tree view).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixing path quoting in git-rebase
Remove unecessary hard-coding of EDITOR=':' VISUAL=':' in some test suites.
Documentation: quote commit messages consistently.
Remove escaping of '|' in manpage option sections
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
* np/progress:
Show total transferred as part of throughput progress
make sure throughput display gets updated even if progress doesn't move
return the prune-packed progress display to the inner loop
add throughput display to git-push
add some copyright notice to the progress display code
add throughput display to index-pack
add throughput to progress display
relax usage of the progress API
make struct progress an opaque type
prune-packed: don't call display_progress() for every file
Stop displaying "Pack pack-$ID created." during git-gc
Teach prune-packed to use the standard progress meter
Change 'Deltifying objects' to 'Compressing objects'
fix for more minor memory leaks
fix const issues with some functions
pack-objects.c: fix some global variable abuse and memory leaks
pack-objects: no delta possible with only one object in the list
cope with multiple line breaks within sideband progress messages
more compact progress display
git-rebase used to fail when run from a path containing a space.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
They are already set and exoprted by sourcing ./test-lib.sh
in all test scripts.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation quotes commit messages 14 times with double-quotes, and 7
times with single-quotes. The patch turns everything to double-quotes.
A nice side effect is that documentation becomes more Windoze-friendly
as AFAIK single quotes won't work there.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The escaped were ending up verbatim in the generated documentation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable is always set if it is going to be used; gcc just does
not notice it.
Signed-off-by: Blake Ramsdell <blaker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changeset takes advantage of the new parseDiffTreeEntry(...) function to
detect changes to the execute bit in the git repository. During submit, git-p4
now looks for changes to the executable bit and if it finds them it "reopens"
the file in perforce, which allows it to change the file type.
The logic for adding the executable bit in perforce is straightforward: the +x
modifier can be used. Removing the executable bit in perforce requires that the
entire filetype be redefined (there is no way to join remove the bit with a -x
modifier, for example). This changeset includes logic to remove the executable
bit from the full file type while preserving the base file type and other
modifiers.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to use pack index version 2 all the time since it has
proper protection against propagation of certain pack corruptions when
repacking which is not possible with index version 1, as demonstrated
in test t5302.
Hence this config option.
The default is still pack index version 1.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use href(action=>..., -replay=>1) to generate links to alternate views
of current page in the $formats_nav (bottom) part of page_nav
navigation bar. This form is used only when all parameters are
repeated, and when the replay form is shorter.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use href(-replay=>1, page=>$page-1) and href(-replay=>1, page=>$page+1)
to generate previous page and next page links.
Generate next page link only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add boolean option '-replay' to href() subroutine, which is used to
generate links in gitweb. This option "replays" current URL,
overriding it with provided parameters. It means that current value
of each CGI parameter is used unless otherwise provided.
This change is meant to make it easier to generate links which differ
from current page URL only by one parameter, for example the same view
but sorted by different column:
href(-replay=>1, order=>"age")
or view which differs by some option, e.g. in log views
href(-replay=>1, extra_options=>"--no-merges")
or alternate view of the same object, e.g. in the 'blob' view
href(-replay=>1, action=>"blob_plain")
Actual use of this functionality is left for later.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
