Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git multi-pack-index verify' inspects the data in an existing MIDX for
correctness by checking that the recorded object offsets are correct,
and so on.
But it does not check that the file's trailing checksum matches the data
that it records. So, if an on-disk corruption happened to occur in the
final few bytes (and all other data was recorded correctly), we would:
- get a clean result from 'git multi-pack-index verify', but
- be unable to reuse the existing MIDX when writing a new one (since
we now check for checksum mismatches before reusing a MIDX)
Teach the 'verify' sub-command to recognize corruption in the checksum
by calling midx_checksum_valid().
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new multi-pack index, Git tries to reuse as much of the
data from an existing MIDX as possible, like object offsets. This is
done to avoid re-opening a bunch of *.idx files unnecessarily, but can
lead to problems if the data we are reusing is corrupt.
That's because we'll blindly reuse data from an existing MIDX without
checking its trailing checksum for validity. So if there is memory
corruption while writing a MIDX, or disk corruption in the intervening
period between writing and reuse, we'll blindly propagate those bad
values forward.
Suppose we experience a memory corruption while writing a MIDX such that
we write an incorrect object offset (or alternatively, the disk corrupts
the data after being written, but before being reused). Then when we go
to write a new MIDX, we'll reuse the bad object offset without checking
its validity. This means that the MIDX we just wrote is broken, but its
trailing checksum is in-tact, since we never bothered to look at the
values before writing.
In the above, a "git multi-pack-index verify" would have caught the
problem before writing, but writing a new MIDX wouldn't have noticed
anything wrong, blindly carrying forward the corrupt offset.
Individual pack indexes check their validity by verifying the crc32
attached to each entry when carrying data forward during a repack.
We could solve this problem for MIDXs in the same way, but individual
crc32's don't make much sense, since their entries are so small.
Likewise, checking the whole file on every read may be prohibitively
expensive if a repository has a lot of objects, packs, or both.
But we can check the trailing checksum when reusing an existing MIDX
when writing a new one. And a corrupt MIDX need not stop us from writing
a new one, since we can just avoid reusing the existing one at all and
pretend as if we are writing a new MIDX from scratch.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An on-disk reverse-index to map the in-pack location of an object
back to its object name across multiple packfiles is introduced.
* tb/reverse-midx:
midx.c: improve cache locality in midx_pack_order_cmp()
pack-revindex: write multi-pack reverse indexes
pack-write.c: extract 'write_rev_file_order'
pack-revindex: read multi-pack reverse indexes
Documentation/technical: describe multi-pack reverse indexes
midx: make some functions non-static
midx: keep track of the checksum
midx: don't free midx_name early
midx: allow marking a pack as preferred
t/helper/test-read-midx.c: add '--show-objects'
builtin/multi-pack-index.c: display usage on unrecognized command
builtin/multi-pack-index.c: don't enter bogus cmd_mode
builtin/multi-pack-index.c: split sub-commands
builtin/multi-pack-index.c: define common usage with a macro
builtin/multi-pack-index.c: don't handle 'progress' separately
builtin/multi-pack-index.c: inline 'flags' with options
There is a lot of pointer dereferencing in the pre-image version of
'midx_pack_order_cmp()', which this patch gets rid of.
Instead of comparing the pack preferred-ness and then the pack id, both
of these checks are done at the same time by using the high-order bit of
the pack id to represent whether it's preferred. Then the pack id and
offset are compared as usual.
This produces the same result so long as there are less than 2^31 packs,
which seems like a likely assumption to make in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the writing half of multi-pack reverse indexes. This is
nothing more than the format describe a few patches ago, with a new set
of helper functions that will be used to clear out stale .rev files
corresponding to old MIDXs.
Unfortunately, a very similar comparison function as the one implemented
recently in pack-revindex.c is reimplemented here, this time accepting a
MIDX-internal type. An effort to DRY these up would create more
indirection and overhead than is necessary, so it isn't pursued here.
Currently, there are no callers which pass the MIDX_WRITE_REV_INDEX
flag, meaning that this is all dead code. But, that won't be the case
for long, since subsequent patches will introduce the multi-pack bitmap,
which will begin passing this field.
(In midx.c:write_midx_internal(), the two adjacent if statements share a
conditional, but are written separately since the first one will
eventually also handle the MIDX_WRITE_BITMAP flag, which does not yet
exist.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement reading for multi-pack reverse indexes, as described in the
previous patch.
Note that these functions don't yet have any callers, and won't until
multi-pack reachability bitmaps are introduced in a later patch series.
In the meantime, this patch implements some of the infrastructure
necessary to support multi-pack bitmaps.
There are three new functions exposed by the revindex API:
- load_midx_revindex(): loads the reverse index corresponding to the
given multi-pack index.
- midx_to_pack_pos() and pack_pos_to_midx(): these convert between the
multi-pack index and pseudo-pack order.
load_midx_revindex() and pack_pos_to_midx() are both relatively
straightforward.
load_midx_revindex() needs a few functions to be exposed from the midx
API. One to get the checksum of a midx, and another to get the .rev's
filename. Similar to recent changes in the packed_git struct, three new
fields are added to the multi_pack_index struct: one to keep track of
the size, one to keep track of the mmap'd pointer, and another to point
past the header and at the reverse index's data.
pack_pos_to_midx() simply reads the corresponding entry out of the
table.
midx_to_pack_pos() is the trickiest, since it needs to find an object's
position in the psuedo-pack order, but that order can only be recovered
in the .rev file itself. This mapping can be implemented with a binary
search, but note that the thing we're binary searching over isn't an
array of values, but rather a permuted order of those values.
So, when comparing two items, it's helpful to keep in mind the
difference. Instead of a traditional binary search, where you are
comparing two things directly, here we're comparing a (pack, offset)
tuple with an index into the multi-pack index. That index describes
another (pack, offset) tuple, and it is _those_ two tuples that are
compared.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, pack-revindex.c will become responsible for
sorting a list of objects in the "MIDX pack order" (which will be
defined in the following patch). To do so, it will need to be know the
pack identifier and offset within that pack for each object in the MIDX.
The MIDX code already has functions for doing just that
(nth_midxed_offset() and nth_midxed_pack_int_id()), but they are
statically declared.
Since there is no reason that they couldn't be exposed publicly, and
because they are already doing exactly what the caller in
pack-revindex.c will want, expose them publicly so that they can be
reused there.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_midx_internal() uses a hashfile to write the multi-pack index, but
discards its checksum. This makes sense, since nothing that takes place
after writing the MIDX cares about its checksum.
That is about to change in a subsequent patch, when the optional
reverse index corresponding to the MIDX will want to include the MIDX's
checksum.
Store the checksum of the MIDX in preparation for that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will need to refer back to 'midx_name' later on in
the function. In fact, this variable is already free()'d later on, so
this makes the later free() no longer redundant.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple packs in the multi-pack index contain the same object, the
MIDX machinery must make a choice about which pack it associates with
that object. Prior to this patch, the lowest-ordered[1] pack was always
selected.
Pack selection for duplicate objects is relatively unimportant today,
but it will become important for multi-pack bitmaps. This is because we
can only invoke the pack-reuse mechanism when all of the bits for reused
objects come from the reuse pack (in order to ensure that all reused
deltas can find their base objects in the same pack).
To encourage the pack selection process to prefer one pack over another
(the pack to be preferred is the one a caller would like to later use as
a reuse pack), introduce the concept of a "preferred pack". When
provided, the MIDX code will always prefer an object found in a
preferred pack over any other.
No format changes are required to store the preferred pack, since it
will be able to be inferred with a corresponding MIDX bitmap, by looking
up the pack associated with the object in the first bit position (this
ordering is described in detail in a subsequent commit).
[1]: the ordering is specified by MIDX internals; for our purposes we
can consider the "lowest ordered" pack to be "the one with the
most-recent mtime.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
When calculating the sizes of certain chunks, we should use 64-bit
multiplication always. This allows us to properly predict the chunk
sizes without risk of overflow.
Other possible overflows were discovered by evaluating each
multiplication in midx.c and ensuring that at least one side of the
operator was of type size_t or off_t.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). In particular, we
can use the return value of pair_chunk() to generate an error when a
required chunk is missing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chunk-format API allows writing the table of contents and all chunks
using the anonymous 'struct chunkfile' type. We only need to convert our
local chunk logic to this API for the multi-pack-index writes to share
that logic with the commit-graph file writes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most expensive operations in write_midx_internal() use the context
struct's progress member, and these indicate the process of the
expensive operations within the chunk writing methods. However, there is
a competing progress struct that counts the progress over all chunks.
This is not very helpful compared to the others, so drop it.
This also reduces our barriers to combining the chunk writing code with
chunk-format.c.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, the chunk-writing methods in midx.c have returned the
amount of data written so the writer method could compare this with the
table of contents. This presents with some interesting issues:
1. If a chunk writing method has a bug that miscalculates the written
bytes, then we can satisfy the table of contents without actually
writing the right amount of data to the hashfile. The commit-graph
writing code checks the hashfile struct directly for a more robust
verification.
2. There is no way for a chunk writing method to gracefully fail.
Returning an int presents an opportunity to fail without a die().
3. The current pattern doesn't match chunk_write_fn type exactly, so we
cannot share code with commit-graph.c
For these reasons, convert the midx chunk writer methods to return an
'int'. Since none of them fail at the moment, they all return 0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t num_large_offsets" into the context. With
this new data, write_midx_large_offsets() now matches the
chunk_write_fn type.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t *pack_perm" and large_offsets_needed bit
into the context.
Update write_midx_object_offsets() to match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "struct pack_midx_entry *entries" list and its count
into the context.
Update write_midx_oid_fanout() and write_midx_oid_lookup() to take the
context directly, as these are easy conversions with this new data.
Only the callers of write_midx_object_offsets() and
write_midx_large_offsets() are updated here, since additional data in
the context before those methods can match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align the write_midx_internal() to use the chunk-format
API, start converting chunk writing methods to match chunk_write_fn. The
first case is to convert write_midx_pack_names() to take "void *data".
We already have the necessary data in "struct write_midx_context", so
this conversion is rather mechanical.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to streamline our chunk-based file formats, align some of
the code structure in write_midx_internal() to be similar to the
patterns in write_commit_graph_file().
Specifically, let's create a "struct write_midx_context" that can be
used as a data parameter to abstract function types.
This change only renames "struct pack_info" to "struct
write_midx_context" and the names of instances from "packs" to "ctx". In
future changes, we will expand the data inside "struct
write_midx_context" and align our chunk-writing method with the
chunk-format API.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous commits, avoid peeking into the `struct
lock_file`. Use the lock file API instead.
The two functions we're calling here double-check that the tempfile is
indeed "active", which is arguably overkill considering how we took the
lock on the line immediately above. More importantly, this future-proofs
us against, e.g., other code appearing between these two lines or the
lock file and/or tempfile internals changing.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all remnants of "sha1" in hash-lookup.c and .h and rename them to
reflect that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Processes that access packdata while the .idx file gets removed
(e.g. while repacking) did not fail or fall back gracefully as they
could.
* tb/idx-midx-race-fix:
midx.c: protect against disappearing packs
packfile.c: protect against disappearing indexes
When a packed object is stored in a multi-pack index, but that pack has
racily gone away, the MIDX code simply calls die(), when it could be
returning an error to the caller, which would in turn lead to
re-scanning the pack directory.
A pack can racily disappear, for example, due to a simultaneous 'git
repack -ad',
You can also reproduce this with two terminals, where one is running:
git init
while true; do
git commit -q --allow-empty -m foo
git repack -ad
git multi-pack-index write
done
(in effect, constantly writing new MIDXs), and the other is running:
obj=$(git rev-parse HEAD)
while true; do
echo $obj | git cat-file --batch-check='%(objectsize:disk)' || break
done
That will sometimes hit the error preparing packfile from
multi-pack-index message, which this patch fixes.
Right now, that path to discovering a missing pack looks something like
'find_pack_entry()' calling 'fill_midx_entry()' and eventually making
its way to call 'nth_midxed_pack_entry()'.
'nth_midxed_pack_entry()' already checks 'is_pack_valid()' and
propagates an error if the pack is invalid. So, this works if the pack
has gone away between calling 'prepare_midx_pack()' and before calling
'is_pack_valid()', but not if it disappears before then.
Catch the case where the pack has already disappeared before
'prepare_midx_pack()' by returning an error in that case, too.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call hashwrite_be64() to write 64-bit values instead of open-coding it
using hashwrite_be32() and sizeof. This shortens the code and makes its
intent clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the multi-pack-index may be written as part of auto maintenance
at the end of a command, reduce the progress output when the operations
are quick. Use start_delayed_progress() instead of start_progress().
Update t5319-multi-pack-index.sh to use GIT_PROGRESS_DELAY=0 now that
the progress indicators are conditional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.multiPackIndex setting has been around since c4d25228eb
(config: create core.multiPackIndex setting, 2018-07-12), but has been
disabled by default. If a user wishes to use the multi-pack-index
feature, then they must enable this config and run 'git multi-pack-index
write'.
The multi-pack-index feature is relatively stable now, so make the
config option true by default. For users that do not use a
multi-pack-index, the only extra cost will be a file lookup to see if a
multi-pack-index file exists (once per process, per object directory).
Also, this config option will be referenced by an upcoming
"incremental-repack" task in the maintenance builtin, so move the config
option into the repository settings struct. Note that if
GIT_TEST_MULTI_PACK_INDEX=1, then we want to ignore the config option
and treat core.multiPackIndex as enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Misc cleanups.
* rs/misc-cleanups:
pack-bitmap-write: use hashwrite_be32() in write_hash_cache()
midx: use hashwrite_u8() in write_midx_header()
fast-import: use write_pack_header()
When a packfile is removed by "git repack", multi-pack-index gets
cleared; the code was taught to do so less aggressively by first
checking if the midx actually refers to a pack that no longer
exists.
* tb/repack-clearing-midx:
midx: traverse the local MIDX first
builtin/repack.c: invalidate MIDX only when necessary
Emit byte-sized values using hashwrite_u8() instead of buffering them
locally first. The hashwrite functions already do their own buffering,
so this double-buffering does not reduce the number of system calls.
Getting rid of it shortens and simplifies the code a bit.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use more buffered I/O where we used to call many small write(2)s.
* rs/more-buffered-io:
upload-pack: use buffered I/O to talk to rev-list
midx: use buffered I/O to talk to pack-objects
connected: use buffered I/O to talk to rev-list
The "--batch-size" option of "git multi-pack-index repack" command
is now used to specify that very small packfiles are collected into
one until the total size roughly exceeds it.
* ds/midx-repack-to-batch-size:
multi-pack-index: repack batches below --batch-size
Similar to the commit-graph format, the multi-pack-index format has a
byte in the header intended to track the hash version used to write the
file. This allows one to interpret the hash length without having the
context of the repository config specifying the hash length. This was
not modified as part of the SHA-256 work because the hash length was
automatically up-shifted due to that config.
Since we have this byte available, we can make the file formats more
obviously incompatible instead of relying on other context from the
repository.
Add a new oid_version() method in midx.c similar to the one in
commit-graph.c. This is specifically made separate from that
implementation to avoid artificially linking the formats.
The test impact requires a few more things than the corresponding change
in the commit-graph format. Specifically, 'test-tool read-midx' was not
writing anything about this header value to output. Since the value
available in 'struct multi_pack_index' is hash_len instead of a version
value, we output "20" or "32" instead of "1" or "2".
Since we want a user to not have their Git commands fail if their
multi-pack-index has the incorrect hash version compared to the
repository's hash version, we relax the die() to an error() in
load_multi_pack_index(). This has some effect on 'git multi-pack-index
verify' as we need to check that a failed parse of a file that exists is
actually a verify error. For that test that checks the hash version
matches, we change the corrupted byte from "2" to "3" to ensure the test
fails for both hash algorithms.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like f0bca72dc7 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to pack-objects by using
stdio's buffering.
Helped-by: Chris Torek <chris.torek@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Encouraged-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of UNLEAK() is to make a reference to a variable that is about
to go out of scope so that leak-checkers will consider it to be
not-leaked. Doing so right before die() is therefore pointless; even
though we are about to exit the program, the variable will still be on
the stack and accessible to leak-checkers.
These annotations aren't really hurting anything, but they clutter the
code and set a bad example of how to use UNLEAK().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --batch-size=<size> option of 'git multi-pack-index repack' is
intended to limit the amount of work done by the repack. In the case of
a large repository, this command should repack a number of small
pack-files but leave the large pack-files alone. Most often, the
repository has one large pack-file from a 'git clone' operation and
number of smaller pack-files from incremental 'git fetch' operations.
The issue with '--batch-size' is that it also _prevents_ the repack from
happening if the expected size of the resulting pack-file is too small.
This was intended as a way to avoid frequent churn of small pack-files,
but it has mostly caused confusion when a repository is of "medium"
size. That is, not enormous like the Windows OS repository, but also not
so small that this incremental repack isn't valuable.
The solution presented here is to collect pack-files for repack if their
expected size is smaller than the batch-size parameter until either the
total expected size exceeds the batch-size or all pack-files are
considered. If there are at least two pack-files, then these are
combined to a new pack-file whose size should not be too much larger
than the batch-size.
This new strategy should succeed in keeping the number of pack-files
small in these "medium" size repositories. The concern about churn is
likely not interesting, as the real control over that is the frequency
in which the repack command is run.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When selecting a batch of pack-files to repack in the "git
multi-pack-index repack" command, Git should respect the
repack.packKeptObjects config option. When false, this option says that
the pack-files with an associated ".keep" file should not be repacked.
This config value is "false" by default.
There are two cases for selecting a batch of objects. The first is the
case where the input batch-size is zero, which specifies "repack
everything". The second is with a non-zero batch size, which selects
pack-files using a greedy selection criteria. Both of these cases are
updated and tested.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "repack" subcommand of "git multi-pack-index" command
creates new packfile(s), it does not call the "git repack"
command but instead directly calls the "git pack-objects"
command, and the configuration variables meant for the "git
repack" command, like "repack.usedaeltabaseoffset", are ignored.
Check the configuration variables used by "git repack" ourselves
in "git multi-index-pack" and pass the corresponding options to
underlying "git pack-objects".
Note that `repack.writeBitmaps` configuration is ignored, as the
pack bitmap facility is useful only with a single packfile.
Signed-off-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
