Adjust tests to verify that the commit history graph tree is taken into
consideration when the diff stat output width is calculated.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change to compute the width of diff --stat did not take into
consideration the output from --graph. The consequence is that when both
options are used, e.g. in 'log --stat --graph', the lines are too long.
Adjust stat width calculations to take --graph output into account.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add output_prefix_length to diff_options. Initialize the value to 0 and only
set it when graph.c:diff_output_prefix_callback() is called.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which show that the width of the --prefix added by --graph
is not taken into consideration when the diff stat output width is
calculated.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the use of strncpy without explicit NUL termination,
we could end up passing names n1 or n2 that are not NUL-terminated
to queue_diff, which requires NUL-terminated strings.
Ensure that each is NUL terminated.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor improvement to t0303.
By Zbigniew Jędrzejewski-Szmek
* zj/test-cred-helper-nicer-prove:
t0303: resurrect commit message as test documentation
t0303: immediately bail out w/o GIT_TEST_CREDENTIAL_HELPER
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
The regexp configured with wordregex was incorrectly reused across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Some tests checked the "diff --stat" output when they do not have to,
which unnecessarily made things harder to verify under GETTEXT_POISON.
By Jonathan Nieder
* jn/diffstat-tests:
diffstat summary line varies by locale: miscellany
test: use numstat instead of diffstat in binary-diff test
test: use --numstat instead of --stat in "git stash show" tests
test: test cherry-pick functionality and output separately
test: modernize funny-names test style
test: use numstat instead of diffstat in funny-names test
test: use test_i18ncmp when checking --stat output
Resurrects the preparatory clean-up patches from another topic that was
discarded, as this would give a saner foundation to build on diff.algo
configuration option series.
* jc/diff-algo-cleanup:
xdiff: PATIENCE/HISTOGRAM are not independent option bits
xdiff: remove XDL_PATCH_* macros
"git commit --author=$name" did not tell the name that was being recorded
in the resulting commit to hooks, even though it does do so when the end
user overrode the authorship via the "GIT_AUTHOR_NAME" environment
variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
Use API to read blob data in smaller chunks in more places to reduce the
memory footprint.
By Nguyễn Thái Ngọc Duy (6) and Junio C Hamano (1)
* nd/stream-more:
update-server-info: respect core.bigfilethreshold
fsck: use streaming API for writing lost-found blobs
show: use streaming API for showing blobs
parse_object: avoid putting whole blob in core
cat-file: use streaming API to print blobs
Add more large blob test cases
streaming: make streaming-write-entry to be more reusable
If the branch configured as upstream didn't have a local tracking
branch, git said "Upstream branch not found". We can be more helpful,
and separate the cases when upstream is not configured, and when it is
configured, but the upstream branch is not tracked in a local branch.
The following configuration leads to the second scenario:
[remote "origin"]
url = ...
fetch = refs/heads/master
[branch "master"]
remote = origin
merge = refs/heads/master
'git pull' will work on master, but master@{upstream} is not defined.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just saying that no upstream exists for such branch,
which is true but not very helpful, check that there's no
refs/heads/barnhc_wiht_tpyo and tell it to the user.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using @{u} or @{upstream} it is common to omit the branch name,
implying current branch. If the upstream is not configured, the error
message was "No upstream branch found for ''".
When resolving '@{u}', branch_get() is called, which almost always
returns a description of a branch. This allows us to use a branch name
in the error message, even if the user said something like '@{u}'.
The only case when branch_get() returns NULL is when HEAD points to so
something which is not a branch. Of course this also means that no
upstream is configured, but it is better to directly say that HEAD
does not point to a branch.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for future changes, add tests which show error messages
with @{upstream} in various conditions:
- test branch@{u} with . as remote
- check error message for branch@{u} on a branch with
* no upstream,
* on a branch with a configured upstream which doesn't have a
remote-tracking branch
- check error message for branch@{u} when branch 'branch' does not
exist
- check error message for @{u} without the branch name
Right now the messages are very similar, but various cases can and
will be distinguished.
Note: test_i18ncmp is not used, because currently error output is not
internationalized. test_cmp will be switched to test_i18ncmp in a later
patch, when error messages are internationalized.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various failure modes in the repository detection code path currently
quote the wrong directory in their error message. The working directory
is changed iteratively to the parent directory until a git repository is
found. If the working directory cannot be changed to the parent
directory for some reason, the detection gives up and prints an error
message. The error message should report the current working directory.
Instead of continually updating the 'cwd' variable, which is actually
used to remember the original working directory, the 'offset' variable
is used to keep track of the current working directory. At the point
where the affected error handling code is called, 'offset' already
points to the end of the parent of the working directory, rather than
the current working directory.
Fix this by explicitly using a variable 'offset_parent' and update
'offset' concurrently with the call to chdir.
In a similar fashion, the function get_device_or_die() would print the
original working directory in case of a failure, rather than the current
working directory. Fix this as well by making use of the 'offset'
variable.
Lastly, replace the phrase 'mount parent' with 'mount point'. The former
appears to be a typo.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-import's command pipe and the frontend's cat-blob/ls response
pipe are both filled, there can be a deadlock. Luckily all existing
frontends consume any pending cat-blob/ls responses completely before
writing the next command.
Document the requirements so future frontend authors and users can be
spared from the problem, too. It is not always easy to catch that
kind of bug by testing.
To set the scene, add some words of explanation to help the novice
understand that "cat-blob" and "ls" output are meant for consumption
by the frontend.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, passing an invalid option, git stash -v, gave:
git-stash: line 204: $'error: unknown option for \'stash save\':
$option\n To provide a message, use git stash save -- \'$option\'':
command not found
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 88a21979c (fetch/pull: recurse into submodules when necessary) all
fetched commits are examined if they contain submodule changes (unless
configuration or command line options inhibit that). If a newly recorded
submodule commit is not present in the submodule, a fetch is run inside
it to download that commit.
Checking new refs was done in an else branch where it wasn't executed for
tags. This normally isn't a problem because tags are only fetched with
the branches they live on, then checking the new commits in the fetched
branches for submodule commits will also process all tags. But when a
specific tag is fetched (or the refspec contains refs/tags/) commits only
reachable by tags won't be searched for submodule commits, which is a bug.
Fix that by moving the code outside the if/else construct to handle new
tags just like any other ref. The performance impact of adding tags that
most of the time lie on a branch which is checked anyway for new submodule
commit should be minimal, as since 6859de4 (fetch: avoid quadratic loop
checking for updated submodules) all ref-tips are collected first and then
fed to a single rev-list.
Spotted-by: Jeff King <peff@peff.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git am empty" test uses the construct
git am empty-file && false || :
which unconditionally returns true. Use test_must_fail instead, which
also has the benefit of noticing if "git am" has segfaulted.
While at it, tighten the test to check that the diagnostic appears on
stderr and not stdout.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.8.5~2 (am: don't infloop for an empty input file, 2012-02-25)
added a check for the human-readable message "Patch format detection
failed." but we forgot to suppress that check when running tests with
git configured to write output in another language.
Noticed by running tests with GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v1.7.9.2~28^2 (2012-02-02) marked "Your branch is behind" and
friends for translation, it forgot to adjust tests not to check those
messages when tests are being run with git configured to write its
output in another language.
With this patch applied, t2020 and t6040 pass again with
GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We give the username and password to curl by sticking them
in a buffer of the form "user:pass" and handing the result
to CURLOPT_USERPWD. Since curl 7.19.1, there is a split
mechanism, where you can specify each element individually.
This has the advantage that a username can contain a ":"
character. It also is less code for us, since we can hand
our strings over to curl directly. And since curl 7.17.0 and
higher promise to copy the strings for us, we we don't even
have to worry about memory ownership issues.
Unfortunately, we have to keep the ugly code for old curl
around, but as it is now nicely #if'd out, we can easily get
rid of it when we decide that 7.19.1 is "old enough".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a credential to give to curl, we must copy it
into a "user:pass" buffer and then hand the buffer to curl.
Old versions of curl did not copy the buffer, and we were
expected to keep it valid. Newer versions of curl will copy
the buffer.
Our solution was to use a strbuf and detach it, giving
ownership of the resulting buffer to curl. However, this
meant that we were leaking the buffer on newer versions of
curl, since curl was just copying it and throwing away the
string we passed. Furthermore, when we replaced a
credential (e.g., because our original one was rejected), we
were also leaking on both old and new versions of curl.
This got even worse in the last patch, which started
replacing the credential (and thus leaking) on every http
request.
Instead, let's use a static buffer to make the ownership
more clear and less leaky. We already keep a static "struct
credential", so we are only handling a single credential at
a time, anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, the private functions in this file were not very
much documented; even though what each of them do is reasonably
self explanatory, the ownership rules for various buffers and
data structures were not very obvious.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These point into a single line in the patch text we read from
the input, and they are not used to modify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The highlightning of combined diffs is currently disabled. This is
because output from a combined diff is much harder to highlight because
it is not obvious which removed and added lines should be compared.
Current code requires that the number of added lines is equal to the
number of removed lines and only skips first +/- character, treating
second +/- as a line content, Thus, it is not possible to simply use
existing algorithm unchanged for combined diffs.
Let's start with a simple case: only highlight changes that come from
one parent, i.e. when every removed line has a corresponding added line
for the same parent. This way the highlightning cannot get wrong. For
example, following diffs would be highlighted:
- removed line for first parent
+ added line for first parent
context line
-removed line for second parent
+added line for second parent
or
- removed line for first parent
-removed line for second parent
+ added line for first parent
+added line for second parent
but following output will not:
- removed line for first parent
-removed line for second parent
+added line for second parent
++added line for both parents
In other words, we require that pattern of '-'-es in pre-image matches
pattern of '+'-es in post-image.
Further changes may introduce more intelligent approach that better
handles combined diffs.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading diff output is sometimes very hard, even if it's colored,
especially if lines differ only in few characters. This is often true
when a commit fixes a typo or renames some variables or functions.
This commit teaches gitweb to highlight characters that are different
between old and new line with a light green/red background. This should
work in the similar manner as in Trac or GitHub.
The algorithm that compares lines is based on contrib/diff-highlight.
Basically, it works by determining common prefix/suffix of corresponding
lines and highlightning only the middle part of lines. For more
information, see contrib/diff-highlight/README.
Combined diffs are not supported but a following commit will change it.
Since we need to pass esc_html()'ed or esc_html_hl_regions()'ed lines to
format_diff_lines(), so it was taught to accept preformatted lines
passed as a reference.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now lines are formatted closer to place where we actually use HTML
formatted output.
This means that we put raw lines in the @chunk accumulator, rather than
formatted lines. Because we still need to know class (type) of line
when accumulating data to post-process and print, process_diff_line()
subroutine was retired and replaced by diff_line_class() used in
git_patchset_body() and new restructured format_diff_line() used in
print_diff_chunk().
As a side effect, we have to pass \%from and \%to down to callstack.
This is a preparation patch for diff refinement highlightning. It's not
meant to change gitweb output.
[jn: wrote commit message]
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This renames print_sidebyside_diff_chunk() to print_diff_chunk() and
makes use of it for both side-by-side and inline diffs. Now diff lines
are always accumulated before they are printed. This opens the
possibility to preprocess diff output before it's printed, which is
needed for diff refinement highlightning (implemented in incoming
patches).
If print_diff_chunk() was left as is, the new function
print_inline_diff_lines() could reorder diff lines. It first prints all
context lines, then all removed lines and finally all added lines. If
the diff output consisted of mixed added and removed lines, gitweb would
reorder these lines. This is true for combined diff output, for
example:
- removed line for first parent
+ added line for first parent
-removed line for second parent
++added line for both parents
would be rendered as:
- removed line for first parent
-removed line for second parent
+ added line for first parent
++added line for both parents
To prevent gitweb from reordering lines, print_diff_chunk() calls
print_diff_lines() as soon as it detects that both added and removed
lines are present and there was a class change, and at the end of chunk.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, print_sidebyside_diff_chunk() does two things: it
accumulates diff lines and prints them. Accumulation may be used to
perform additional operations on diff lines, so it makes sense to split
these two things. Thus, whole code that formats and prints diff lines
in the 'side-by-side' manner is moved out of print_sidebyside_diff_chunk()
to a separate subroutine and two conditions that control printing
diff liens are merged.
Thanks to that, we can easily (in later patches) replace call to that
subroutine with a call to more generic print_diff_lines() that will
control whether 'inline' or 'side-by-side' diff should be printed.
As a side effect, context lines are printed just before printing added
and removed lines, and at the end of chunk (previously, they were
printed immediately on the class change). However, this doesn't change
gitweb output.
The outcome of this patch is that print_sidebyside_diff_chunk() is now
much shorter and easier to read.
While at it, drop the '# assume that it is change' comment. According
to Jakub Narębski:
What I meant here when I was writing it that they are lines that
changed between two versions, like '!' in original (not unified)
context format.
We can omit this comment.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, esc_html_hl_regions() accepts options and passes them
down to esc_html(). This may be needed if a caller wants to pass
-nbsp=>1 to esc_html().
The idea and implementation example of this change was described in
337da8d2 (gitweb: Introduce esc_html_match_hl and esc_html_hl_regions,
2012-02-27). While other suggestions may be more useful in some cases,
there is no need to implement them at the moment. The
esc_html_hl_regions() interface may be changed later if it's needed.
[mk: extracted from larger patch and wrote commit message]
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $end is equal to or less than $begin, esc_html_hl_regions()
generates an empty <span> element. It normally shouldn't be visible in
the web browser, but it doesn't look good when looking at page source.
It also minimally increases generated page size for no special reason.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $s->[0] and $s->[1] variables look a bit cryptic. Let's rename them
to $begin and $end so that it's clear what they do.
Suggested-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git cherry-pick fails when picking a non-ff commit that is empty. The advice
given with the failure is that a git-commit --allow-empty should be issued to
explicitly add the empty commit during the cherry pick. This option allows a
user to specify before hand that they want to keep the empty commit. This
eliminates the need to issue both a cherry pick and a commit operation.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between v1.7.1 and v1.7.2, 582aa00bdf switched the default "diff"
invocation not to use XDF_NEED_MINIMAL, but this breaks "git blame"
rather badly.
Allow the command line option to ask for an extra careful matching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I tentatively named the release notes "1.7.11" but this may have to
be renamed to "1.8" or some other name later. Let's see how well
we would do during this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
