Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean uses read_directory to fill in a `struct dir` with
potential hits. However, read_directory does not actually
check against our pathspec. It uses a simplified version
that may turn up false positives. As a result, we need to
check that any hits match our pathspec. We do so reliably
for non-directories. For directories, if "-d" is not given
we check that the pathspec matched exactly (i.e., we are
even stricter, and require an explicit "git clean foo" to
clean "foo/"). But if "-d" is given, rather than relaxing
the exact match to allow a recursive match, we do not check
the pathspec at all.
This regression was introduced in 113f10f (Make git-clean a
builtin, 2007-11-11).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notion of "ignored tracked" directories introduced in 721ac4ed "dir.c:
Make git-status --ignored more consistent" has a few unwanted side effects:
- git-clean -d -X: deletes ignored tracked directories. git-clean should
never delete tracked content.
- git-ls-files --ignored --other --directory: lists ignored tracked
directories instead of "other" directories.
- git-status --ignored: lists ignored tracked directories while contained
files may be listed as modified. Paths listed by git-status should be
disjoint (except in long format where a path may be listed in both the
staged and unstaged section).
Additionally, the current behaviour violates documentation in gitignore(5)
("Specifies intentionally *untracked* files to ignore") and Documentation/
technical/api-directory-listing.txt ("DIR_SHOW_OTHER_DIRECTORIES: Include
a directory that is *not tracked*.").
In dir.c::treat_directory, remove the special handling of ignored tracked
directories, so that the DIR_SHOW_OTHER_DIRECTORIES flag only affects
"other" (i.e. untracked) directories. In dir.c::dir_add_name, check that
added paths are untracked even if DIR_SHOW_IGNORED is set.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_dir_recursively() has a check to avoid removing the directory it
was asked to remove without recursing into it and report success when the
directory is the top level of a working tree of a nested git repository,
to protect such a repository from "clean -f" (without double -f). If a
working tree of a nested git repository is in a subdirectory of a toplevel
project, however, this protection did not apply by mistake; we forgot to
pass the REMOVE_DIR_KEEP_NESTED_GIT down to the recursive removal
codepath.
This requires us to also teach the higher level not to remove the
directory it is asked to remove, when the recursed invocation did not
remove the directory it was asked to remove due to a nested git
repository, as it is not an error to leave the parent directories of such
a nested repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a last ditch effort, try rmdir(2) when we cannot read the directory
to be removed. It may be an empty directory that we can remove without
any permission, as long as we can modify its parent directory.
Noticed by Linus.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test fails on Windows since 2dec68c (tests: add missing &&, batch 2).
Even though this test allocates and leaves behind files, subsequent tests
do not depend on this, so it is safe to just skip it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
This adds index as a prerequisite for directory listing (with
exclude). At the moment directory listing is used by "git clean",
"git add", "git ls-files" and "git status"/"git commit" and
unpack_trees()-related commands. These commands have been
checked/modified to populate index before doing directory listing.
add_excludes_from_file() does not enable this feature, because it
is used to read .git/info/exclude and some explicit files specified
by "git ls-files".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, you cannot remove files that are in use, not even with
'rm -rf'. So we need to run 'exec <foo/bar' inside a subshell lest
removing the whole test repository fail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests for recent change by Dmitry to fix the report "git
clean" gives on removed paths, and also makes sure the command detects
paths that is outside working tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep the file open to: the OS does not allow removal of open files.
The saner systems just have a saner permission model and chmod 0
is enough for the test.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean simply ignored errors if removing a file or directory failed. This
patch makes it raise a warning and the exit code also greater than zero if
there are remaining files.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
git-clean did not honor core.excludesfile configuration
variable, although some other commands such as git-add and
git-status did. Fix this inconsistency.
Original report and patch from Shun'ichi Fuji. Rewritten by me
and bugs and tests are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tests the -d, -n, -f, -x, and -X options to git-clean.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
