Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The colorization is controlled with the config setting "color.remote".
Supported keywords are "error", "warning", "hint" and "success". They
are highlighted if they appear at the start of the line, which is
common in error messages, eg.
ERROR: commit is missing Change-Id
The Git push process itself prints lots of non-actionable messages
(eg. bandwidth statistics, object counters for different phases of the
process). This obscures actionable error messages that servers may
send back. Highlighting keywords in the sideband draws more attention
to those messages.
The background for this change is that Gerrit does server-side
processing to create or update code reviews, and actionable error
messages (eg. missing Change-Id) must be communicated back to the user
during the push. User research has shown that new users have trouble
seeing these messages.
The highlighting is done on the client rather than server side, so
servers don't have to grow capabilities to understand terminal escape
codes and terminal state. It also consistent with the current state
where Git is control of the local display (eg. prefixing messages with
"remote: ").
The highlighting can be configured using color.remote.<KEYWORD>
configuration settings. Since the keys are matched case insensitively,
we match the keywords case insensitively too.
Finally, this solution is backwards compatible: many servers already
prefix their messages with "error", and they will benefit from this
change without requiring a server update. By contrast, a server-side
solution would likely require plumbing the TERM variable through the
git protocol, so it would require changes to both server and client.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when we removed `git apply --index-info` in 2007, we forgot to
adjust the documentation for update-index that reads its output.
Let's reorder the description of three formats to present the other
two formats that are still generated by git commands before this
format, and stop mentioning `git apply --index-info`.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following phrase could be interpreted multiple ways:
"To pretend you have a file with mode and sha1 at path"
In particular, I can think of two:
1. Pretend we have some new file, which happens to have a given mode
and sha1
2. Pretend one of the files we are already tracking has a different
mode and sha1 than what it really does
I think people could easily assume either case while reading, but the
example command provided doesn't actually handle the first case, which
caused some minor frustration to at least one user. Modify the example
command so that it correctly handles both cases, and re-order the
wording in a way that makes it more likely folks will assume the first
interpretation. I believe the new example shouldn't pose any obstacles
to those wanting the second interpretation (at worst, they pass an
unnecessary extra flag).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bug was noticed when writing the previous patch; a fix for this bug
is not easy though: If we choose to ignore the case of the subsection
(and revert most of the code of the previous patch, just keeping
s/strncasecmp/strcmp/), then we'd introduce new sections using the
new syntax, such that
--------
[section.subsection]
key = value1
--------
git config section.Subsection.key value2
would result in
--------
[section.subsection]
key = value1
[section.Subsection]
key = value2
--------
which is even more confusing. A proper fix would replace the first
occurrence of 'key'. As the syntax is deprecated, let's prefer to not
spend time on fixing the behavior and just document it instead.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From a security perspective, it seems that SHA-256, BLAKE2, SHA3-256,
K12, and so on are all believed to have similar security properties.
All are good options from a security point of view.
SHA-256 has a number of advantages:
* It has been around for a while, is widely used, and is supported by
just about every single crypto library (OpenSSL, mbedTLS, CryptoNG,
SecureTransport, etc).
* When you compare against SHA1DC, most vectorized SHA-256
implementations are indeed faster, even without acceleration.
* If we're doing signatures with OpenPGP (or even, I suppose, CMS),
we're going to be using SHA-2, so it doesn't make sense to have our
security depend on two separate algorithms when either one of them
alone could break the security when we could just depend on one.
So SHA-256 it is. Update the hash-function-transition design doc to
say so.
After this patch, there are no remaining instances of the string
"NewHash", except for an unrelated use from 2008 as a variable name in
t/t9700/test.pl.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Dan Shumow <danshu@microsoft.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently rerere can't handle nested conflicts and will error out when
it encounters such conflicts. Do that by recursively calling the
'handle_conflict' function to normalize the conflict.
Note that a conflict like this would only be produced if a user
commits a file with conflict markers, and gets a conflict including
that in a susbsequent operation.
The conflict ID calculation here deserves some explanation:
As we are using the same handle_conflict function, the nested conflict
is normalized the same way as for non-nested conflicts, which means
the ancestor in the diff3 case is stripped out, and the parts of the
conflict are ordered alphabetically.
The conflict ID is however is only calculated in the top level
handle_conflict call, so it will include the markers that 'rerere'
adds to the output. e.g. say there's the following conflict:
<<<<<<< HEAD
1
=======
<<<<<<< HEAD
3
=======
2
>>>>>>> branch-2
>>>>>>> branch-3~
it would be recorde as follows in the preimage:
<<<<<<<
1
=======
<<<<<<<
2
=======
3
>>>>>>>
>>>>>>>
and the conflict ID would be calculated as
sha1(1<NUL><<<<<<<
2
=======
3
>>>>>>><NUL>)
Stripping out vs. leaving the conflict markers in place in the inner
conflict should have no practical impact, but it simplifies the
implementation.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some documentation for the logic behind the conflict normalization
in rerere.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making a change to the documentation, it's easy to
forget to check the rendered version to make sure it was
formatted as you intended. And simply doing a diff between
the two built versions is less trivial than you might hope:
- diffing the roff or html output isn't particularly
readable; what we really care about is what the end user
will see
- you have to tweak a few build variables to avoid
spurious differences (e.g., version numbers, build
times)
Let's provide a script that builds and installs the manpages
for two commits, renders the results using "man", and diffs
the result. Since this is time-consuming, we'll also do our
best to avoid repeated work, keeping intermediate results
between runs.
Some of this could probably be made a little less ugly if we
built support into Documentation/Makefile. But by relying
only on "make install-man" working, this script should work
for generating a diff between any two versions, whether they
include this script or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color group in config.txt is actually sorted but changes in
sb/blame-color broke this. Reorder color.blame.* and move
blame.coloring back to the rest of blame.* (and reorder that group too
while we're there)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
"git diff --color-moved" feature has further been tweaked.
* sb/diff-color-move-more:
diff.c: offer config option to control ws handling in move detection
diff.c: add white space mode to move detection that allows indent changes
diff.c: factor advance_or_nullify out of mark_color_as_moved
diff.c: decouple white space treatment from move detection algorithm
diff.c: add a blocks mode for moved code detection
diff.c: adjust hash function signature to match hashmap expectation
diff.c: do not pass diff options as keydata to hashmap
t4015: avoid git as a pipe input
xdiff/xdiffi.c: remove unneeded function declarations
xdiff/xdiff.h: remove unused flags
"git fsck" learns to make sure the optional commit-graph file is in
a sane state.
* ds/commit-graph-fsck: (23 commits)
coccinelle: update commit.cocci
commit-graph: update design document
gc: automatically write commit-graph files
commit-graph: add '--reachable' option
commit-graph: use string-list API for input
fsck: verify commit-graph
commit-graph: verify contents match checksum
commit-graph: test for corrupted octopus edge
commit-graph: verify commit date
commit-graph: verify generation number
commit-graph: verify parent list
commit-graph: verify root tree OIDs
commit-graph: verify objects exist
commit-graph: verify corrupt OID fanout and lookup
commit-graph: verify required chunks are present
commit-graph: verify catches corrupt signature
commit-graph: add 'verify' subcommand
commit-graph: load a root tree from specific graph
commit: force commit to parse from object database
commit-graph: parse commit from chosen graph
...
The `p4-pre-submit` hook is executed before git-p4 submits code.
If the hook exits with non-zero value, submit process not start.
Signed-off-by: Chen Bin <chenbin.sh@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users interested in the fetch.negotiationAlgorithm variable added in
42cc7485a2 ("negotiator/skipping: skip commits during fetch",
2018-07-16) are probably interested in the related --negotiation-tip
option added in 3390e42adb ("fetch-pack: support negotiation tip
whitelist", 2018-07-02).
Change the documentation for those two to reference one another to
point readers in the right direction.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the handling of fetch.negotiationAlgorithm=<str> to error out
on unknown strings, i.e. everything except "default" or "skipping".
This changes the behavior added in 42cc7485a2 ("negotiator/skipping:
skip commits during fetch", 2018-07-16) which would ignore all unknown
values and silently fall back to the "default" value.
For a feature like this it's much better to produce an error than
proceed. We don't want users to debug some amazingly slow fetch that
should benefit from "skipping", only to find that they'd forgotten to
deploy the new git version on that particular machine.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike ref advertisement, client capabilities and the first want are
separated by SP, not NUL, in the implementation. Fix the documentation
to align with the implementation. pack-protocol.txt is already fixed.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fsck.<msg-id> is set to an unknown value it'll cause "fsck" to
die, but the same is not true of the "fetch" and "receive"
variants. Document this and test for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test and document that the {fetch,receive}.fsck.* family of variables
doesn't fall back on the corresponding .fsck.* variables.
This was alluded to in the existing documentation by saying that
"receive" looks at receive.fsck.* and "fsck" looks at fsck.* etc., but
it wasn't explicitly stated that there was no fallback, and if you'd
e.g. like to configure the skipList you need to do that for all three.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement support for fetch.fsck.* corresponding with the existing
receive.fsck.*. This allows for pedantically cloning repositories with
specific issues without turning off fetch.fsckObjects.
One such repository is https://github.com/robbyrussell/oh-my-zsh.git
which before this change will emit this error when cloned with
fetch.fsckObjects:
error: object 2b7227859263b6aabcc28355b0b994995b7148b6: zeroPaddedFilemode: contains zero-padded file modes
fatal: Error in object
fatal: index-pack failed
Now with fetch.fsck.zeroPaddedFilemode=warn we'll warn about that
issue, but the clone will succeed:
warning: object 2b7227859263b6aabcc28355b0b994995b7148b6: zeroPaddedFilemode: contains zero-padded file modes
warning: object a18c4d13c2a5fa2d4ecd5346c50e119b999b807d: zeroPaddedFilemode: contains zero-padded file modes
warning: object 84df066176c8da3fd59b13731a86d90f4f1e5c9d: zeroPaddedFilemode: contains zero-padded file modes
The motivation for this is to be able to turn on fetch.fsckObjects
globally across a fleet of computers but still be able to manually
clone various legacy repositories by either white-listing specific
issues, or better yet whitelist specific objects.
The use of --git-dir=* instead of -C in the tests could be considered
somewhat archaic, but the tests I'm adding here are duplicating the
corresponding receive.* tests with as few changes as possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the transfer.fsckObjects documentation to explicitly note the
unique security and/or corruption issues fetch.fsckObjects suffers
from, since it doesn't have a quarantine environment.
This was already alluded to in the existing documentation, but let's
spell it out so there's no confusion here, and give a concrete example
of how to work around this limitation.
Let's also prominently note that this is considered to be a limitation
of the current implementation, rather than something that's intended
and by design, since we might change this in the future.
See
https://public-inbox.org/git/20180531060259.GE17344@sigill.intra.peff.net/
for further details.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing documentation led the user to believe that all we were
doing were basic reachability sanity checks, but that hasn't been true
for a very long time. Update the description to match reality, and
note the caveat that there's a quarantine for accepting pushes, but
not for fetching.
Also mention that the fsck checks for security issues, which was my
initial motivation for writing this fetch.fsck.* series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the fsck.<msg-id> and receive.fsck.<msg-id>
variables was mostly duplicated in two places, with fsck.<msg-id>
making no mention of the corresponding receive.fsck.<msg-id>, and the
same for fsck.skipList.
I spent quite a lot of time today wondering why setting the
fsck.<msg-id> variant wasn't working to clone a legacy repository (not
that that would have worked anyway, but a subsequent patch implements
fetch.fsck.<msg-id>).
Rectify this situation by describing the feature in general terms
under the fsck.* documentation, and make the receive.fsck.*
documentation refer to those variables instead.
This documentation was initially added in 2becf00ff7 ("fsck: support
demoting errors to warnings", 2015-06-22) and 4b55b9b479 ("fsck:
document the new receive.fsck.<msg-id> options", 2015-06-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refer readers of fetch.fsckObjects and receive.fsckObjects to
transfer.fsckObjects instead of repeating the description at each
location.
I don't think this description of them makes much sense, but for now
I'm just moving the existing documentation around. Making it better
will be done in a later patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changelog embedded in the document pre-dates the addition of the
document to git.git (it used to be a Google Doc), so it only goes up
to 752414ae43 ("technical doc: add a design doc for hash function
transition", 2017-09-27).
Since then I made some small edits to it, which would have been worthy
of including in this changelog (but weren't). Instead of amending it
to include these, just note that future changes will be noted in the
log.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --color-moved "dimmed_zebra" mode (with an underscore) is an
anachronism. Most options and modes are hyphenated. It is more difficult
to type and somewhat more difficult to read than those which are
hyphenated. Therefore, rename it to "dimmed-zebra", and nominally
deprecate "dimmed_zebra".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse ':/substring'" did not consider the history leading
only to HEAD when looking for a commit with the given substring,
when the HEAD is detached. This has been fixed.
* wc/find-commit-with-pattern-on-detached-head:
sha1-name.c: for ":/", find detached HEAD commits
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
The content-transfer-encoding of the message "git send-email" sends
out by default was 8bit, which can cause trouble when there is an
overlong line to bust RFC 5322/2822 limit. A new option 'auto' to
automatically switch to quoted-printable when there is such a line
in the payload has been introduced and is made the default.
* bc/send-email-auto-cte:
docs: correct RFC specifying email line length
send-email: automatically determine transfer-encoding
send-email: accept long lines with suitable transfer encoding
send-email: add an auto option for transfer encoding
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of an interdiff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add an --interdiff option to automate this process. The argument to
--interdiff specifies the tip of the previous attempt against which to
generate the interdiff. For example:
git format-patch --cover-letter --interdiff=v1 -3 v2
The previous attempt and the patch series being formatted must share a
common base.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.multiPackIndex config setting controls the multi-pack-
index (MIDX) feature. If false, the setting will disable all reads
from the multi-pack-index file.
Read this config setting in the new prepare_multi_pack_index_one()
which is called during prepare_packed_git(). This check is run once
per repository.
Add comparison commands in t5319-multi-pack-index.sh to check
typical Git behavior remains the same as the config setting is turned
on and off. This currently includes 'git rev-list' and 'git log'
commands to trigger several object database reads. Currently, these
would only catch an error in the prepare_multi_pack_index_one(), but
with later commits will catch errors in object lookups, abbreviations,
and approximate object counts.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final pair of chunks for the multi-pack-index file stores the object
offsets. We default to using 32-bit offsets as in the pack-index version
1 format, but if there exists an offset larger than 32-bits, we use a
trick similar to the pack-index version 2 format by storing all offsets
at least 2^31 in a 64-bit table; we use the 32-bit table to point into
that 64-bit table as necessary.
We only store these 64-bit offsets if necessary, so create a test that
manipulates a version 2 pack-index to fake a large offset. This allows
us to test that the large offset table is created, but the data does not
match the actual packfile offsets. The multi-pack-index offset does match
the (corrupted) pack-index offset, so a future feature will compare these
offsets during a 'verify' step.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index needs to track which packfiles it indexes. Store
these in our first required chunk. Since filenames are not well
structured, add padding to keep good alignment in later chunks.
Modify the 'git multi-pack-index read' subcommand to output the
existence of the pack-file name chunk. Modify t5319-multi-pack-index.sh
to reflect this new output and the new expected number of chunks.
Defense in depth: A pattern we are using in the multi-pack-index feature
is to verify the data as we write it. We want to ensure we never write
invalid data to the multi-pack-index. There are many checks that verify
that the values we are writing fit the format definitions. This mainly
helps developers while working on the feature, but it can also identify
issues that only appear when dealing with very large data sets. These
large sets are hard to encode into test cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of writing multi-pack-indexes, add a skeleton
'git multi-pack-index write' subcommand and send the options to a
write_midx_file() method. Also create a skeleton test script that
tests the 'write' subcommand.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new 'git multi-pack-index' builtin will be the plumbing access
for writing, reading, and checking multi-pack-index files. The
initial implementation is a no-op.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option of --color-moved has proven to be useful as observed on the
mailing list. However when refactoring sometimes the indentation changes,
for example when partitioning a functions into smaller helper functions
the code usually mostly moved around except for a decrease in indentation.
To just review the moved code ignoring the change in indentation, a mode
to ignore spaces in the move detection as implemented in a previous patch
would be enough. However the whole move coloring as motivated in commit
2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought
up the notion of the reviewer being able to trust the move of a "block".
As there are languages such as python, which depend on proper relative
indentation for the control flow of the program, ignoring any white space
change in a block would not uphold the promises of 2e2d5ac that allows
reviewers to pay less attention to the inside of a block, as inside
the reviewer wants to assume the same program flow.
This new mode of white space ignorance will take this into account and will
only allow the same white space changes per line in each block. This patch
even allows only for the same change at the beginning of the lines.
As this is a white space mode, it is made exclusive to other white space
modes in the move detection.
This patch brings some challenges, related to the detection of blocks.
We need a wide net to catch the possible moved lines, but then need to
narrow down to check if the blocks are still intact. Consider this
example (ignoring block sizes):
- A
- B
- C
+ A
+ B
+ C
At the beginning of a block when checking if there is a counterpart
for A, we have to ignore all space changes. However at the following
lines we have to check if the indent change stayed the same.
Checking if the indentation change did stay the same, is done by computing
the indentation change by the difference in line length, and then assume
the change is only in the beginning of the longer line, the common tail
is the same. That is why the test contains lines like:
- <TAB> A
...
+ A <TAB>
...
As the first line starting a block is caught using a compare function that
ignores white spaces unlike the rest of the block, where the white space
delta is taken into account for the comparison, we also have to think about
the following situation:
- A
- B
- A
- B
+ A
+ B
+ A
+ B
When checking if the first A (both in the + and - lines) is a start of
a block, we have to check all 'A' and record all the white space deltas
such that we can find the example above to be just one block that is
indented.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can already disable replace refs using a command line
option or environment variable, but those are awkward to
apply universally. Let's add a config option to do the same
thing.
That raises the question of why one might want to do so
universally. The answer is that replace refs violate the
immutability of objects. For instance, if you wanted to
cache the diff between commit XYZ and its parent, then in
theory that never changes; the hash XYZ represents the total
state. But replace refs violate that; pushing up a new ref
may create a completely new diff.
The obvious "if it hurts, don't do it" answer is not to
create replace refs if you're doing this kind of caching.
But for a site hosting arbitrary repositories, they may want
to allow users to share replace refs with each other, but
not actually respect them on the site (because the caching
is more important than the replace feature).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that setting core.ignoreCase to deviate from reality would
not turn a case-incapable filesystem into a case-capable one.
* ms/core-icase-doc:
Documentation: declare "core.ignoreCase" as internal variable
The "-l" option in "git branch -l" is an unfortunate short-hand for
"--create-reflog", but many users, both old and new, somehow expect
it to be something else, perhaps "--list". This step warns when "-l"
is used as a short-hand for "--create-reflog" and warns about the
future repurposing of the it when it is used.
* jk/branch-l-0-deprecation:
branch: deprecate "-l" option
t: switch "branch -l" to "branch --create-reflog"
t3200: unset core.logallrefupdates when testing reflog creation
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
Add missing colon in two places to fix formatting of options.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit allows git to create and check x509 type signatures using
gpgsm.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Supporting multiple signing formats we will have the need to configure a
custom program each. Add a new config value to cater for that.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "gpg.format" where the user can specify which type of signature to
use for commits. At the moment only "openpgp" is supported and the value is
not even used. This commit prepares for a new types of signatures.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original implementation of the move detection logic the choice for
ignoring white space changes is the same for the move detection as it is
for the regular diff. Some cases came up where different treatment would
have been nice.
Allow the user to specify that white space should be ignored differently
during detection of moved lines than during generation of added and removed
lines. This is done by providing analogs to the --ignore-space-at-eol,
-b, and -w options by introducing the option --color-moved-ws=<modes>
with the modes named "ignore-space-at-eol", "ignore-space-change" and
"ignore-all-space", which is used only during the move detection phase.
As we change the default, we'll adjust the tests.
For now we do not infer any options to treat white spaces in the move
detection from the generic white space options given to diff.
This can be tuned later to reasonable default.
As we plan on adding more white space related options in a later patch,
that interferes with the current white space options, use a flag field
and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily
check at parse time if we give invalid combinations and (b) can reuse
parts of this patch.
By having the white space treatment in its own option, we'll also
make it easier for a later patch to have an config option for
spaces in the move detection.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "blocks" mode provides a middle ground between plain and zebra.
It is as intuitive (few colors) as plain, but still has the requirement
for a minimum of lines/characters to count a block as moved.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
(https://public-inbox.org/git/87o9j0uljo.fsf@evledraar.gmail.com/)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new negotiation algorithm used during fetch that skips
commits in an effort to find common ancestors faster. The skips grow
similarly to the Fibonacci sequence as the commit walk proceeds further
away from the tips. The skips may cause unnecessary commits to be
included in the packfile, but the negotiation step typically ends more
quickly.
Usage of this algorithm is guarded behind the configuration flag
fetch.negotiationAlgorithm.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index feature generalizes the existing pack-index
feature by indexing objects across multiple pack-files.
Describe the basic file format, using a 12-byte header followed by
a lookup table for a list of "chunks" which will be described later.
The file ends with a footer containing a checksum using the hash
algorithm.
The header allows later versions to create breaking changes by
advancing the version number. We can also change the hash algorithm
using a different version value.
We will add the individual chunk format information as we introduce
the code that writes that information.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch broadens the set of commits matched by ":/<pattern>" to
include commits reachable from HEAD but not any named ref. This avoids
surprising behavior when working with a detached HEAD and trying to
refer to a commit that was recently created and only exists within the
detached state.
If multiple worktrees exist, only the current worktree's HEAD is
considered reachable. This is consistent with the existing behavior for
other per-worktree refs: e.g., bisect refs are considered reachable, but
only within the relevant worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: William Chargin <wchargin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we support octopus merges in the `--rebase-merges` mode,
we should give users who actually read the manuals a chance to know
about this fact.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is consistent with `git commit` which, like `git merge`, supports
passing the commit message via `-m <msg>` and, unlike `git merge` before
this patch, via `-F <file>`.
It is useful to allow this for scripted use, or for the upcoming patch
to allow (re-)creating octopus merges in `git rebase --rebase-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge.c contains this important requirement for merge strategies:
...the index must be in sync with the head commit. The strategies are
responsible to ensure this.
However, Documentation/git-merge.txt says:
...[merge will] abort if there are any changes registered in the index
relative to the `HEAD` commit. (One exception is when the changed
index entries are in the state that would result from the merge
already.)
Interestingly, prior to commit c0be8aa06b ("Documentation/git-merge.txt:
Partial rewrite of How Merge Works", 2008-07-19),
Documentation/git-merge.txt said much more:
...the index file must match the tree of `HEAD` commit...
[NOTE]
This is a bit of a lie. In certain special cases [explained
in detail]...
Otherwise, merge will refuse to do any harm to your repository
(that is...your working tree...and index are left intact).
So, this suggests that the exceptions existed because there were special
cases where it would case no harm, and potentially be slightly more
convenient for the user. While the current text in git-merge.txt does
list a condition under which it would be safe to proceed despite the index
not matching HEAD, it does not match what is actually implemented, in
three different ways:
* The exception is written to describe what unpack-trees allows. Not
all merge strategies allow such an exception, though, making this
description misleading. 'ours' and 'octopus' merges have strictly
enforced index==HEAD for a while, and the commit previous to this
one made 'recursive' do so as well.
* If someone did a three-way content merge on a specific file using
versions from the relevant commits and staged it prior to running
merge, then that path would technically satisfy the exception listed
in git-merge.txt. unpack-trees.c would still error out on the path,
though, because it defers the three-way content merge logic to other
parts of the code (resolve, octopus, or recursive) and has no way of
checking whether the index entry from before the merge will match
the end result of the merge.
* The exception as implemented in unpack-trees actually only checked
that the index matched the MERGE_HEAD version of the file and that
HEAD matched the merge base. Assuming no renames, that would indeed
provide cases where the index matches the end result we'd get from a
merge. But renames means unpack-trees is checking that it instead
matches something other than what the final result will be, risking
either erroring out when we shouldn't need to, or not erroring out
when we should and overwriting the user's staged changes.
In addition to the wording behind this exception being misleading, it is
also somewhat surprising to see how many times the code for the special
cases were wrong or the check to make sure the index matched head was
forgotten altogether:
* Prior to commit ee6566e8d7 ("[PATCH] Rewrite read-tree", 2005-09-05),
there were many cases where an unclean index entry was allowed (look for
merged_entry_allow_dirty()); it appears that in those cases, the merge
would have simply overwritten staged changes with the result of the
merge. Thus, the merge result would have been correct, but the user's
uncommitted changes could be thrown away without warning.
* Prior to commit 160252f816 ("git-merge-ours: make sure our index
matches HEAD", 2005-11-03), the 'ours' merge strategy did not check
whether the index matched HEAD. If it didn't, the resulting merge
would include all the staged changes, and thus wasn't really an 'ours'
strategy.
* Prior to commit 3ec62ad9ff ("merge-octopus: abort if index does not
match HEAD", 2016-04-09), 'octopus' merges did not check whether the
index matched HEAD, also resulting in any staged changes from before
the commit silently being folded into the resulting merge. commit
a6ee883b8e ("t6044: new merge testcases for when index doesn't match
HEAD", 2016-04-09) was also added at the same time to try to test to
make sure all strategies did the necessary checking for the requirement
that the index match HEAD. Sadly, it didn't catch all the cases, as
evidenced by the remainder of this list...
* Prior to commit 65170c07d4 ("merge-recursive: avoid incorporating
uncommitted changes in a merge", 2017-12-21), merge-recursive simply
relied on unpack_trees() to do the necessary check, but in one special
case it avoided calling unpack_trees() entirely and accidentally ended
up silently including any staged changes from before the merge in the
resulting merge commit.
* The commit immediately before this one in this series noted that the
exceptions were written in a way that assumed no renames, making it
unsafe for merge-recursive to use. merge-recursive was modified to
use its own check to enforce that index==HEAD.
This history makes it very tempting to go into builtin/merge.c and replace
the comment that strategies must enforce that index matches HEAD with code
that just enforces it. At this point, that would only affect the
'resolve' strategy; all other strategies have each been modified to
manually enforce it. (However, note that index==HEAD is not strictly
enforced for fast-forward merges, as those are not considered a merge
strategy and they trigger in builtin/merge.c before the section in the
code where the relevant comment is found.)
But, even if we don't take the step of just fixing these problems by
enforcing index==HEAD for all strategies, we at least need to update this
misleading documentation in git-merge.txt. For now, just modify the claim
in Documentation/git-merge.txt to fix the error. The precise details
around combination of merges strategies and special cases probably is not
relevant to most users, so simply state that exceptions may exist but are
narrow and vary depending upon which merge strategy is in use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git grep --only-matching', a new option to only print the
matching part(s) of a line.
For instance, a line containing the following (taken from README.md:27):
(`man gitcvs-migration` or `git help cvs-migration` if git is
Is printed as follows:
$ git grep --line-number --column --only-matching -e git -- \
README.md | grep ":27"
README.md:27:7:git
README.md:27:16:git
README.md:27:38:git
The patch works mostly as one would expect, with the exception of a few
considerations that are worth mentioning here.
Like GNU grep, this patch ignores --only-matching when --invert (-v) is
given. There is a sensible answer here, but parity with the behavior of
other tools is preferred.
Because a line might contain more than one match, there are special
considerations pertaining to when to print line headers, newlines, and
how to increment the match column offset. The line header and newlines
are handled as a special case within the main loop to avoid polluting
the surrounding code with conditionals that have large blocks.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git send-email documentation specifies RFC 2821 (the SMTP RFC) as
providing line length limits, but the specification that restricts line
length to 998 octets is RFC 2822 (the email message format RFC). Since
RFC 2822 has been obsoleted by RFC 5322, update the text to refer to RFC
5322 instead of RFC 2821.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email, when invoked without a --transfer-encoding option, sends
8bit data without a MIME version or a transfer encoding. This has
several downsides.
First, unless the transfer encoding is specified, it defaults to 7bit,
meaning that non-ASCII data isn't allowed. Second, if lines longer than
998 bytes are used, we will send an message that is invalid according to
RFC 5322. The --validate option, which is the default, catches this
issue, but it isn't clear to many people how to resolve this.
To solve these issues, default the transfer encoding to "auto", so that
we explicitly specify 8bit encoding when lines don't exceed 998 bytes
and quoted-printable otherwise. This means that we now always emit
Content-Transfer-Encoding and MIME-Version headers, so remove the
conditionals from this portion of the code.
It is unlikely that the unconditional inclusion of these two headers
will affect the deliverability of messages in anything but a positive
way, since MIME is already widespread and well understood by most email
programs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --validate (which is the default), we warn about lines exceeding
998 characters due to the limits specified in RFC 5322. However, if
we're using a suitable transfer encoding (quoted-printable or base64),
we're guaranteed not to have lines exceeding 76 characters, so there's
no need to fail in this case. The auto transfer encoding handles this
specific case, so accept it as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For most patches, using a transfer encoding of 8bit provides good
compatibility with most servers and makes it as easy as possible to view
patches. However, there are some patches for which 8bit is not a valid
encoding: RFC 5322 specifies that a message must not have lines
exceeding 998 octets.
Add a transfer encoding value, auto, which indicates that a patch should
use 8bit where allowed and quoted-printable otherwise. Choose
quoted-printable instead of base64, since base64-encoded plain text is
treated as suspicious by some spam filters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current description of "core.ignoreCase" reads like an option which
is intended to be changed by the user while it's actually expected to
be set by Git on initialization only. Subsequently, Git relies on the
proper configuration of this variable, as noted by Bryan Turner [1]:
Git on a case-insensitive filesystem (APFS, HFS+, FAT32, exFAT,
vFAT, NTFS, etc.) is not designed to be run with anything other
than core.ignoreCase=true.
[1] https://marc.info/?l=git&m=152998665813997&w=2
mid:CAGyf7-GeE8jRGPkME9rHKPtHEQ6P1+ebpMMWAtMh01uO3bfy8w@mail.gmail.com
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature shipped in Git 2.18 has some inconsistencies in
the constants used by the implementation and specified by the format
document.
The commit data chunk uses the key "CDAT" in the file format, but was
previously documented to say "CGET".
The commit data chunk stores commit parents using two 32-bit fields that
typically store the integer position of the parent in the list of commit
ids within the commit-graph file. When a parent does not exist, we had
documented the value 0xffffffff, but implemented the value 0x70000000.
This swap is easy to correct in the documentation, but unfortunately
reduces the number of commits that we can store in the commit-graph.
Update that estimate, too.
Reported-by: Grant Welch <gwelch925@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default core.excludesfile path is $XDG_CONFIG_HOME/git/ignore.
$HOME/.config/git/ignore is used if XDG_CONFIG_HOME is empty or unset,
as described later in the document.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase backends currently behave differently with empty commit messages,
largely as a side-effect of the different underlying commands on which
they are based. am-based rebases apply commits with an empty commit
message without stopping or requiring the user to specify an extra flag.
(It is interesting to note that am-based rebases are the default rebase
type, and no one has ever requested a --no-allow-empty-message flag to
change this behavior.) merge-based and interactive-based rebases (which
are ultimately based on git-commit), will currently halt on any such
commits and require the user to manually specify what to do with the
commit and continue.
One possible rationale for the difference in behavior is that the purpose
of an "am" based rebase is solely to transplant an existing history, while
an "interactive" rebase is one whose purpose is to polish a series before
making it publishable. Thus, stopping and asking for confirmation for a
possible problem is more appropriate in the latter case. However, there
are two problems with this rationale:
1) merge-based rebases are also non-interactive and there are multiple
types of rebases that use the interactive machinery but are not
explicitly interactive (e.g. when either --rebase-merges or
--keep-empty are specified without --interactive). These rebases are
also used solely to transplant an existing history, and thus also
should default to --allow-empty-message.
2) this rationale only says that the user is more accepting of stopping
in the case of an explicitly interactive rebase, not that stopping
for this particular reason actually makes sense. Exploring whether
it makes sense, requires backing up and analyzing the underlying
commands...
If git-commit did not error out on empty commits by default, accidental
creation of commits with empty messages would be a very common occurrence
(this check has caught me many times). Further, nearly all such empty
commit messages would be considered an accidental error (as evidenced by a
huge amount of documentation across version control systems and in various
blog posts explaining how important commit messages are). A simple check
for what would otherwise be a common error thus made a lot of sense, and
git-commit gained an --allow-empty-message flag for special case
overrides. This has made commits with empty messages very rare.
There are two sources for commits with empty messages for rebase (and
cherry-pick): (a) commits created in git where the user previously
specified --allow-empty-message to git-commit, and (b) commits imported
into git from other version control systems. In case (a), the user has
already explicitly specified that there is something special about this
commit that makes them not want to specify a commit message; forcing them
to re-specify with every cherry-pick or rebase seems more likely to be
infuriating than helpful. In case (b), the commit is highly unlikely to
have been authored by the person who has imported the history and is doing
the rebase or cherry-pick, and thus the user is unlikely to be the
appropriate person to write a commit message for it. Stopping and
expecting the user to modify the commit before proceeding thus seems
counter-productive.
Further, note that while empty commit messages was a common error case for
git-commit to deal with, it is a rare case for rebase (or cherry-pick).
The fact that it is rare raises the question of why it would be worth
checking and stopping on this particular condition and not others. For
example, why doesn't an interactive rebase automatically stop if the
commit message's first line is 2000 columns long, or is missing a blank
line after the first line, or has every line indented with five spaces, or
any number of other myriad problems?
Finally, note that if a user doing an interactive rebase does have the
necessary knowledge to add a message for any such commit and wants to do
so, it is rather simple for them to change the appropriate line from
'pick' to 'reword'. The fact that the subject is empty in the todo list
that the user edits should even serve as a way to notify them.
As far as I can tell, the fact that merge-based and interactive-based
rebases stop on commits with empty commit messages is solely a by-product
of having been based on git-commit. It went without notice for a long
time precisely because such cases are rare. The rareness of this
situation made it difficult to reason about, so when folks did eventually
notice this behavior, they assumed it was there for a good reason and just
added an --allow-empty-message flag. In my opinion, stopping on such
messages not desirable in any of these cases, even the (explicitly)
interactive case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of aspects that are common to all rebases regardless
of which backend is in use; however, the behavior for these different
aspects varies in ways that could surprise users. (In fact, it's not
clear -- to me at least -- that these differences were even desirable or
intentional.) Document these differences.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase was taught the --force-rebase option in commit b2f82e05de ("Teach
rebase to rebase even if upstream is up to date", 2009-02-13). This flag
worked for the am and merge backends, but wasn't a valid option for the
interactive backend.
rebase was taught the --no-ff option for interactive rebases in commit
b499549401 ("Teach rebase the --no-ff option.", 2010-03-24), to do the
exact same thing as --force-rebase does for non-interactive rebases. This
commit explicitly documented the fact that --force-rebase was incompatible
with --interactive, though it made --no-ff a synonym for --force-rebase
for non-interactive rebases. The choice of a new option was based on the
fact that "force rebase" didn't sound like an appropriate term for the
interactive machinery.
In commit 6bb4e485cf ("rebase: align variable names", 2011-02-06), the
separate parsing of command line options in the different rebase scripts
was removed, and whether on accident or because the author noticed that
these options did the same thing, the options became synonyms and both
were accepted by all three rebase types.
In commit 2d26d533a0 ("Documentation/git-rebase.txt: -f forces a rebase
that would otherwise be a no-op", 2014-08-12), which reworded the
description of the --force-rebase option, the (no-longer correct) sentence
stating that --force-rebase was incompatible with --interactive was
finally removed.
Finally, as explained at
https://public-inbox.org/git/98279912-0f52-969d-44a6-22242039387f@xiplink.com
In the original discussion around this option [1], at one point I
proposed teaching rebase--interactive to respect --force-rebase
instead of adding a new option [2]. Ultimately --no-ff was chosen as
the better user interface design [3], because an interactive rebase
can't be "forced" to run.
We have accepted both --no-ff and --force-rebase as full synonyms for all
three rebase types for over seven years. Documenting them differently
and in ways that suggest they might not be quite synonyms simply leads to
confusion. Adjust the documentation to match reality.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is now integrated with 'fsck' and 'gc',
so remove those items from the "Future Work" section of the
commit-graph design document.
Also remove the section on lazy-loading trees, as that was completed
in an earlier patch series.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing commit-graph files, it can be convenient to ask for all
reachable commits (starting at the ref set) in the resulting file. This
is particularly helpful when writing to stdin is complicated, such as a
future integration with 'git gc'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.commitGraph is true, verify the contents of the commit-graph
during 'git fsck' using the 'git commit-graph verify' subcommand. Run
this check on all alternates, as well.
We use a new process for two reasons:
1. The subcommand decouples the details of loading and verifying a
commit-graph file from the other fsck details.
2. The commit-graph verification requires the commits to be loaded
in a specific order to guarantee we parse from the commit-graph
file for some objects and from the object database for others.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit-graph file becomes corrupt, we need a way to verify
that its contents match the object database. In the manner of
'git fsck' we will implement a 'git commit-graph verify' subcommand
to report all issues with the file.
Add the 'verify' subcommand to the 'commit-graph' builtin and its
documentation. The subcommand is currently a no-op except for
loading the commit-graph into memory, which may trigger run-time
errors that would be caught by normal use. Add a simple test that
ensures the command returns a zero error code.
If no commit-graph file exists, this is an acceptable state. Do
not report any errors.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Last sections are squashed into non-formatted block after adding
"REBASING MERGES".
To reproduce the error see bottom of page:
https://git-scm.com/docs/git-rebase
Signed-off-by: Vladimir Parfinenko <vparfinenko@excelsior-usa.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase has many options that only work with one of its three backends.
It also has a few other pairs of incompatible options. Document these.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The other "mode" options of git-branch have short-option
aliases that are easy to type (e.g., "-d" and "-m"). Let's
give "--list" the same treatment.
This also makes it consistent with the similar "git tag -l"
option.
We didn't do this originally because "--create-reflog" was
squatting on the "-l" option. Now that we've deprecated that
use for long enough, we can make the switch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-l" option is short for "--create-reflog". This has
caused much confusion over the years. Most people expect it
to work as "--list", because that would match the other
"mode" options like -d/--delete and -m/--move, as well as
the similar -l/--list option of git-tag.
Adding to the confusion, using "-l" _appears_ to work as
"--list" in some cases:
$ git branch -l
* master
because the branch command defaults to listing (so even
trying to specify --list in the command above is redundant).
But that may bite the user later when they add a pattern,
like:
$ git branch -l foo
which does not return an empty list, but in fact creates a
new branch (with a reflog, naturally) called "foo".
It's also probably quite uncommon for people to actually use
"-l" to create a reflog. Since 0bee591869 (Enable reflogs by
default in any repository with a working directory.,
2006-12-14), this is the default in non-bare repositories.
So it's rather unfortunate that the feature squats on the
short-and-sweet "-l" (which was only added in 3a4b3f269c
(Create/delete branch ref logs., 2006-05-19), meaning there
were only 7 months where it was actually useful).
Let's deprecate "-l" in hopes of eventually re-purposing it
to "--list".
Note that we issue the warning only when we're not in list
mode. This means that people for whom it works as a happy
accident, namely:
$ git branch -l
master
won't see the warning at all. And when we eventually switch
to it meaning "--list", that will just continue to work.
We do the issue the warning for these important cases:
- when we are actually creating a branch, in case the user
really did mean it as "--create-reflog"
- when we are in some _other_ mode, like deletion. There
the "-l" is a noop for now, but it will eventually
conflict with any other mode request, and the user
should be told that this is changing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP servers return 400 if you send headers before the GET request.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support git-grep(1)'s new option, '--column', document and teach
grep.c how to interpret relevant configuration options, similar to those
associated with '--line-number'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git-grep(1)' a new option, '--column', to show the column
number of the first match on a non-context line. This makes it possible
to teach 'contrib/git-jump/git-jump' how to seek to the first matching
position of a grep match in your editor, and allows similar additional
scripting capabilities.
For example:
$ git grep -n --column foo | head -n3
.clang-format:51:14:# myFunction(foo, bar, baz);
.clang-format:64:7:# int foo();
.clang-format:75:8:# void foo()
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a link to gitsubmodules(7) under the `submodule.active` entry in
git-config(1).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lineNumber has casing that is inconsistent with surrounding options,
like color.grep.matchContext, and color.grep.matchSelected. Re-case this
documentation in order to be consistent with the text around it, and to
ensure that new entries are consistent, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
It was not "newer versions of bash" but newer versions of
bash-completion that made commit 085e2ee0e6 (completion: load
completion file for external subcommand, 2018-04-29) both necessary
and possible.
Update the corresponding RelNotes entry accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax "git merge <message> HEAD <commit>" has been removed. The
order of the syntax should also be updated.
Signed-off-by: Meng-Sung Wu <mengsungwu@fortunewhite.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that this feature works with some commands (merge and cherry-pick,
implying that it also works with commands that build on these like rebase
-m and rebase -i). Explicitly mentioning two commands hopefully implies
that it may not always work with other commands (am, and rebase without
flags that imply either -m or -i).
Also, since the directory rename detection from this cycle was
specifically added in merge-recursive and not diffcore-rename, remove the
'in "diff" family" phrase from the note. (Folks have requested in the
past that `git diff` detect directory renames and somehow simplify its
output, so it may be helpful to avoid implying that diff has any new
capability here.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the obvious consensus of hyphenated "remote-tracking branch", and
fix an obvious typo, all in documentation and comments.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to the git-p4 submit command to disable syncing
with Perforce.
This is useful for the case where a git-p4 mirror has been setup
on a server somewhere, running from (e.g.) cron, and developers
then clone from this. Having the local cloned copy also sync
from Perforce just isn't useful.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just lets you set the --disable-rebase option with the
git configuration options git-p4.disableRebase. If you're
using this option, you probably want to set it all the time
for a given repo.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Romain Merland <merlorom@yahoo.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "checkout" documentation describes:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat
as equivalent to [...] <remote>/<branch.
This is a really useful feature. The problem is that when you add
another remote (e.g. a fork), git won't find a unique branch name
anymore, and will instead print this unhelpful message:
$ git checkout master
error: pathspec 'master' did not match any file(s) known to git
Now it will, on my git.git checkout, print:
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
Note that the "error: pathspec[...]" message is still printed. This is
because whatever else checkout may have tried earlier, its final
fallback is to try to resolve the argument as a path. E.g. in this
case:
$ ./git --exec-path=$PWD checkout master pu
error: pathspec 'master' did not match any file(s) known to git.
error: pathspec 'pu' did not match any file(s) known to git.
There we don't print the "hint:" implicitly due to earlier logic
around the DWIM fallback. That fallback is only used if it looks like
we have one argument that might be a branch.
I can't think of an intrinsic reason for why we couldn't in some
future change skip printing the "error: pathspec[...]" error. However,
to do so we'd need to pass something down to checkout_paths() to make
it suppress printing an error on its own, and for us to be confident
that we're not silencing cases where those errors are meaningful.
I don't think that's worth it since determining whether that's the
case could easily change due to future changes in the checkout logic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote update" can take both a single remote nickname and a
nickname for remote groups, but only one of them was documented.
* nd/remote-update-doc:
remote: doc typofix
remote.txt: update documentation for 'update' command
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
For consistency, use backquotes when referring to environment
variables, as is done in other man pages.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b344e1614b (git remote update: Fallback to remote if group does
not exist - 2009-04-06) lets "git remote update" accept individual
remotes as well. Previously this command only accepted remote
groups. The commit updates the command syntax but not the actual
document of this subcommand. Update it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 2.18 cycle, directory rename detection was merged, then reverted,
then reworked in such a way to fix another prominent bug in addition to
the original problem causing it to be reverted. When the reworked series
was merged, we ended up with two nearly duplicate release notes. Remove
the second copy, but preserve the information about the extra bug fix.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a mention of the security mailing list to the README, and to
Documentation/SubmittingPatches.. 2caa7b8d27 ("git manpage: note
git-security@googlegroups.com", 2018-03-08) already added it to the
man page, but for developers either the README, or the documentation
on how to contribute (SubmittingPatches) may be the first place to
look.
Use the same wording as we already have on the git-scm.com website and
in the man page for the README, while the wording is adjusted in
SubmittingPatches to match the surrounding document better.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use names instead of numbers for the AsciiDoc attributes that are used
for the footnotes. We will add more footnotes in subsequent commits,
and attributes should ideally all be unique. Having named attributes
will help ensure uniqueness, and we won't have to re-number the
attributes if we add a footnote earlier in the document.
In addition it also clarifies that the attribute name/number is not
related to the number the footnote will get in the output.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
